The old behavior was problematic in the context of rebuild-index as it
could leave old, possibly invalid index files behind without returning a
fatal error.
Prune calls rebuildIndex before removing any data from the repository.
For this use case failing to delete an old index MUST be treated as a
fatal error. Otherwise the index could still contain an old index file
that refers to blobs/packs that were later on deleted by prune. Later
backup runs will assume that the affected blobs already exist in the
repository which results in a backup which misses data.
The previous check only approximately verified whether all required
blobs were found. However, after forgetting a few snapshots the
repository contains lots of unused blobs whose number can be sufficient
to make up for missing packs.
When coupled with a malfunctioning backend that temporarily returns broken
data this could cause restic to regard the corresponding packs as
invalid and thereby delete data that's still in use. This change lets
restic play it safe and refuse to delete anything if data is missing.
Do not lock the repository if --no-lock global flag is set. This allows
to mount repositories which are archived on a read only system.
Signed-off-by: Sébastien Gross <seb•ɑƬ•chezwam•ɖɵʈ•org>
The seen BlobSet always contained a subset of the entries in blobs.
Thus use blobs instead and avoid the memory overhead of the second set.
Suggested-by: Alexander Weiss <alex@weissfam.de>
If a data blob and a tree blob with the same ID (= same content) exist,
then the checker did not report a data or tree blob as unused when the
blob of the other type was still in use.
The backup command used to return a zero exit code as long as a snapshot
could be created successfully, even if some of the source files could not
be read (in which case the snapshot would contain the rest of the files).
This made it hard for automation/scripts to detect failures/incomplete
backups by looking at the exit code. Restic now returns the following exit
codes for the backup command:
- 0 when the command was successful
- 1 when there was a fatal error (no snapshot created)
- 3 when some source data could not be read (incomplete snapshot created)
That site might not have supported https:// when those links were
originally added. It does now.
Also dropping the _spec.html_ ending of the url, there being a `<link
rel="canonical" ...>` tag suggesting that that no longer being the
preferred address.
cmd/restic/globals.go already provides Printf, Println and Warnf wrapper
which get their output streams from the globalOptions object. This
allows for stream replacements when testing.
- The SaveBlob method now checks for duplicates.
- Moves handling of pending blobs to MasterIndex.
-> also cleans up pending index entries when they are saved in the index
-> when using SaveBlob no need to care about index any longer
- Always check for full index and save it when storing packs.
-> removes the need of an index uploader
-> also removes the verbose "uploaded intermediate index" messages
- The Flush method now also saves the index
- Fix race condition when checking and saving full/non-finalized indexes
errors.Fatalf wraps a error and just keeps an error message as a string.
This prevents the `restic.IsAlreadyLocked(err)` check from working as
the error is no longer an ErrAlreadyLocked.
Just add an additional remark to the error using `errors.WithMessage`.
This command can only be built on Darwin, FreeBSD and Linux
(and if we upgrade bazil.org/fuse, only FreeBSD and Linux:
https://github.com/bazil/fuse/issues/224).
Listing the few supported operating systems explicitly here makes
porting restic to new platforms easier.
`term.Print` sends the output via a channel to a goroutine which
actually prints the message. This may race with the password prompt
printed by `OpenRepository` resulting in a missing prompt.
restic uses a cleanup hook to ensure that it restores the terminal
configuration to a sane state, when restic is interrupted while reading
a password from the terminal. However, this causes a problem, when
restic runs in a background job, as reconfiguring a terminal will cause
a SIGTTOU to be sent to restic pausing it. Therefore, restic seems to
hang on shutdown when it was running in the background.
This commit changes the behavior to only restore the terminal
configuration if restic was interrupted while reading a password from
the terminal. As reading a password from the terminal requires that
restic is in the foreground, this should avoid restic getting stopped.
Fixes#2298
Issue introduced in #402
In a damaged repository with a missing blob, the error message tried to
dereference the subtreeID field of the current node, which is a file
however. Said field is set to nil for a file thus causing a segfault
when dereferenced.
Fix this by using the actual parentTreeID.
The username and hostname for new keys can be specified with the new
--user and --host flags, respectively. The flags are used only by the
`key add` command and are otherwise ignored.
This allows adding keys with for a desired user and host without having
to run restic as that particular user on that particular host, making
automated key management easier.
Co-authored-by: James TD Smith <ahktenzero@mohorovi.cc>
The `dump`, `find`, `forget`, `ls`, `mount`, `restore`, `snapshots`,
`stats` and `tag` commands will now take into account multiple
`--host` and `-H` flags.
internal/ui/jsonstatus and termstatus sound similar but are not related
in any way. Instead `internal/ui/backup` and `internal/ui/jsonstatus/status`
are the counterparts. Rename the latter to `internal/ui/json/backup` to
make this clear.
Restic used to quit if the repository password was typed incorrectly once.
Restic will now ask the user again for the repository password if typed incorrectly.
The user will now get three tries to input the correct password before restic quits.
The help text for `restic stats` lists a number of modes in a list.
Make sure the "more info" text is a separate paragraph rather than
being part of the list.
With this change it is possible to dump a folder to stdout as a tar. The
It can be used just like the normal dump command:
`./restic dump fa97e6e1 "/data/test/" > test.tar`
Where `/data/test/` is a a folder instead of a file.
This commit is a followup to the addition of the --group-by flag for the
snapshots command. Adding the grouping code there introduced duplicated
code (the forget command also does grouping). This commit refactors
boths sides to only use shared code.
This commit moves the code which is used to group snapshots in the
snapshots command into an own function to deduplicate code shared by the
snapshots command and forget command.
This commit will add json tags to the structs for json output, so all
json variables of the snapshot command output are lowercase and
snake-case.
Furthermore it adds some internal code changes based on the feedback in
the pull request #2087.
This commit adds a --group-by option to the snapshots command, which
behaves similar to the --group-by option of forget. Valid option values
are "host, paths, tags". If this option is given, the output of
snapshots will be divided into multiple tables, according to the value
given (i.e. "host" will create a table of snapshots for each host, that
has a snapshot in the list). Also the JSON output will be grouped.
The default behavior (when --group-by is not given) has not changed.
More to this discussion can be found in issue #2037.
Reading the password from non-terminal stdin used io.ReadFull with a
byte slice of length 1000.
We are now using a Scanner to read one line of input, independent of its
length.
Additionally, if stdin is not a terminal, the password is read only
once instead of twice (in an effort to detect typos).
Fixes#2203
Signed-off-by: Peter Schultz <peter.schultz@classmarkets.com>
This commit changes the signatures for repository.LoadAndDecrypt and
utils.LoadAll to allow passing in a []byte as the buffer to use. This
buffer is enlarged as needed, and returned back to the caller for
further use.
In later commits, this allows reducing allocations by reusing a buffer
for multiple calls, e.g. in a worker function.
This patch makes it more explicit what is meant by the CACHEDIR.TAG file.
It not only has to have this particular name, but also a specific content
(described at http://bford.info/cachedir/spec.html), which is not immediately
obvious to the user.
This adds a test of the json output of the forget command, by running it
once, asking it to keep one snapshot, and verifying that the output has
the right number of snapshots listed in the Keep and Remove fields of
the result.
This commit changes the logic slightly: checking the permissions in the
fuse mount when nobody else besides the current user can access the fuse
mount does not sense. The current user has access to the repo files in
addition to the password, so they can access all data regardless of what
the fuse mount does.
Enabling `--allow-root` allows the root user to access the files in the
fuse mount, for this user no permission checks will be done anyway.
The code now enables `DefaultPermissions` automatically when
`--allow-other` is set, it can be disabled with
`--no-default-permissions` to restore the old behavior.
This option restores the previous behavior of `mount` by disabling the "DefaultPermissions" FUSE option. This allows any user that can access the mountpoint to read any file from the snapshot. Normal FUSE rules apply, so `allow-root` or `allow-other` can be used to allow users besides the mounting user to access these files.
This enforces the Unix permissions of the snapshot files within the mounted filesystem, which will only allow users to access snapshot files if they had access to the file outside of the snapshot.
Make restic forget --keep-within accept time ranges measured in hours and choose
accordingly which snapshots to keep and which to forget. Add relative tests.
The default value of the `--host` flag was set to 'H' (the shorthand
version of the flag), this caused the snapshot lookup to fail.
Also add shorthand `-H` for `backup` command.
Closes#2040
Some time ago we changed the paths in the repo to always use a slash for
separation, it seems we missed that the `dump` command still uses the
`filepath` package, so on Windows backslashes are used.
Closes#2079
