.. Normally, there are no heading levels assigned to certain characters as the structure is determined from the succession of headings. However, this convention is used in Python’s Style Guide for documenting which you may follow: # with overline, for parts * for chapters = for sections - for subsections ^ for subsubsections " for paragraphs ########## Backing up ########## Now we're ready to backup some data. The contents of a directory at a specific point in time is called a "snapshot" in restic. Run the following command and enter the repository password you chose above again: .. code-block:: console $ restic -r /srv/restic-repo --verbose backup ~/work open repository enter password for repository: password is correct lock repository load index files start scan start backup scan finished in 1.837s processed 1.720 GiB in 0:12 Files: 5307 new, 0 changed, 0 unmodified Dirs: 1867 new, 0 changed, 0 unmodified Added: 1.200 GiB snapshot 40dc1520 saved As you can see, restic created a backup of the directory and was pretty fast! The specific snapshot just created is identified by a sequence of hexadecimal characters, ``40dc1520`` in this case. You can see that restic tells us it processed 1.720 GiB of data, this is the size of the files and directories in ``~/work`` on the local file system. It also tells us that only 1.200 GiB was added to the repository. This means that some of the data was duplicate and restic was able to efficiently reduce it. If you don't pass the ``--verbose`` option, restic will print less data. You'll still get a nice live status display. Be aware that the live status shows the processed files and not the transferred data. Transferred volume might be lower (due to de-duplication) or higher. On Windows, the ``--use-fs-snapshot`` option will use Windows' Volume Shadow Copy Service (VSS) when creating backups. Restic will transparently create a VSS snapshot for each volume that contains files to backup. Files are read from the VSS snapshot instead of the regular filesystem. This allows to backup files that are exclusively locked by another process during the backup. By default VSS ignores Outlook OST files. This is not a restriction of restic but the default Windows VSS configuration. The files not to snapshot are configured in the Windows registry under the following key: .. code-block:: console HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToSnapshot For more details refer the official Windows documentation e.g. the article ``Registry Keys and Values for Backup and Restore``. If you run the backup command again, restic will create another snapshot of your data, but this time it's even faster and no new data was added to the repository (since all data is already there). This is de-duplication at work! .. code-block:: console $ restic -r /srv/restic-repo backup --verbose ~/work open repository enter password for repository: password is correct lock repository load index files using parent snapshot d875ae93 start scan start backup scan finished in 1.881s processed 1.720 GiB in 0:03 Files: 0 new, 0 changed, 5307 unmodified Dirs: 0 new, 0 changed, 1867 unmodified Added: 0 B snapshot 79766175 saved You can even backup individual files in the same repository (not passing ``--verbose`` means less output): .. code-block:: console $ restic -r /srv/restic-repo backup ~/work.txt enter password for repository: password is correct snapshot 249d0210 saved If you're interested in what restic does, pass ``--verbose`` twice (or ``--verbose=2``) to display detailed information about each file and directory restic encounters: .. code-block:: console $ echo 'more data foo bar' >> ~/work.txt $ restic -r /srv/restic-repo backup --verbose --verbose ~/work.txt open repository enter password for repository: password is correct lock repository load index files using parent snapshot f3f8d56b start scan start backup scan finished in 2.115s modified /home/user/work.txt, saved in 0.007s (22 B added) modified /home/user/, saved in 0.008s (0 B added, 378 B metadata) modified /home/, saved in 0.009s (0 B added, 375 B metadata) processed 22 B in 0:02 Files: 0 new, 1 changed, 0 unmodified Dirs: 0 new, 2 changed, 0 unmodified Data Blobs: 1 new Tree Blobs: 3 new Added: 1.116 KiB snapshot 8dc503fc saved In fact several hosts may use the same repository to backup directories and files leading to a greater de-duplication. Please be aware that when you backup different directories (or the directories to be saved have a variable name component like a time/date), restic always needs to read all files and only afterwards can compute which parts of the files need to be saved. When you backup the same directory again (maybe with new or changed files) restic will find the old snapshot in the repo and by default only reads those files that are new or have been modified since the last snapshot. This is decided based on the following attributes of the file in the file system: * Type (file, symlink, or directory?) * Modification time * Size * Inode number (internal number used to reference a file in a file system) Now is a good time to run ``restic check`` to verify that all data is properly stored in the repository. You should run this command regularly to make sure the internal structure of the repository is free of errors. Excluding Files *************** You can exclude folders and files by specifying exclude patterns, currently the exclude options are: - ``--exclude`` Specified one or more times to exclude one or more items - ``--iexclude`` Same as ``--exclude`` but ignores the case of paths - ``--exclude-caches`` Specified once to exclude folders containing a special file - ``--exclude-file`` Specified one or more times to exclude items listed in a given file - ``--iexclude-file`` Same as ``exclude-file`` but ignores cases like in ``--iexclude`` - ``--exclude-if-present foo`` Specified one or more times to exclude a folder's content if it contains a file called ``foo`` (optionally having a given header, no wildcards for the file name supported) - ``--exclude-larger-than size`` Specified once to excludes files larger than the given size Please see ``restic help backup`` for more specific information about each exclude option. Let's say we have a file called ``excludes.txt`` with the following content: :: # exclude go-files *.go # exclude foo/x/y/z/bar foo/x/bar foo/bar foo/**/bar It can be used like this: .. code-block:: console $ restic -r /srv/restic-repo backup ~/work --exclude="*.c" --exclude-file=excludes.txt This instructs restic to exclude files matching the following criteria: * All files matching ``*.c`` (parameter ``--exclude``) * All files matching ``*.go`` (second line in ``excludes.txt``) * All files and sub-directories named ``bar`` which reside somewhere below a directory called ``foo`` (fourth line in ``excludes.txt``) Patterns use `filepath.Glob `__ internally, see `filepath.Match `__ for syntax. Patterns are tested against the full path of a file/dir to be saved, even if restic is passed a relative path to save. Environment-variables in exclude files are expanded with `os.ExpandEnv `__, so ``/home/$USER/foo`` will be expanded to ``/home/bob/foo`` for the user ``bob``. To get a literal dollar sign, write ``$$`` to the file. Note that tilde (``~``) expansion does not work, please use the ``$HOME`` environment variable instead. Patterns need to match on complete path components. For example, the pattern ``foo``: * matches ``/dir1/foo/dir2/file`` and ``/dir/foo`` * does not match ``/dir/foobar`` or ``barfoo`` A trailing ``/`` is ignored, a leading ``/`` anchors the pattern at the root directory. This means, ``/bin`` matches ``/bin/bash`` but does not match ``/usr/bin/restic``. Regular wildcards cannot be used to match over the directory separator ``/``. For example: ``b*ash`` matches ``/bin/bash`` but does not match ``/bin/ash``. For this, the special wildcard ``**`` can be used to match arbitrary sub-directories: The pattern ``foo/**/bar`` matches: * ``/dir1/foo/dir2/bar/file`` * ``/foo/bar/file`` * ``/tmp/foo/bar`` Spaces in patterns listed in an exclude file can be specified verbatim. That is, in order to exclude a file named ``foo bar star.txt``, put that just as it reads on one line in the exclude file. Please note that beginning and trailing spaces are trimmed - in order to match these, use e.g. a ``*`` at the beginning or end of the filename. Spaces in patterns listed in the other exclude options (e.g. ``--exclude`` on the command line) are specified in different ways depending on the operating system and/or shell. Restic itself does not need any escaping, but your shell may need some escaping in order to pass the name/pattern as a single argument to restic. On most Unixy shells, you can either quote or use backslashes. For example: * ``--exclude='foo bar star/foo.txt'`` * ``--exclude="foo bar star/foo.txt"`` * ``--exclude=foo\ bar\ star/foo.txt`` By specifying the option ``--one-file-system`` you can instruct restic to only backup files from the file systems the initially specified files or directories reside on. In other words, it will prevent restic from crossing filesystem boundaries when performing a backup. For example, if you backup ``/`` with this option and you have external media mounted under ``/media/usb`` then restic will not back up ``/media/usb`` at all because this is a different filesystem than ``/``. Virtual filesystems such as ``/proc`` are also considered different and thereby excluded when using ``--one-file-system``: .. code-block:: console $ restic -r /srv/restic-repo backup --one-file-system / Please note that this does not prevent you from specifying multiple filesystems on the command line, e.g: .. code-block:: console $ restic -r /srv/restic-repo backup --one-file-system / /media/usb will back up both the ``/`` and ``/media/usb`` filesystems, but will not include other filesystems like ``/sys`` and ``/proc``. .. note:: ``--one-file-system`` is currently unsupported on Windows, and will cause the backup to immediately fail with an error. Files larger than a given size can be excluded using the `--exclude-larger-than` option: .. code-block:: console $ restic -r /srv/restic-repo backup ~/work --exclude-larger-than 1M This excludes files in ``~/work`` which are larger than 1 MB from the backup. The default unit for the size value is bytes, so e.g. ``--exclude-larger-than 2048`` would exclude files larger than 2048 bytes (2 kilobytes). To specify other units, suffix the size value with one of ``k``/``K`` for kilobytes, ``m``/``M`` for megabytes, ``g``/``G`` for gigabytes and ``t``/``T`` for terabytes (e.g. ``1k``, ``10K``, ``20m``, ``20M``, ``30g``, ``30G``, ``2t`` or ``2T``). Including Files *************** By using the ``--files-from`` option you can read the files you want to back up from one or more files. This is especially useful if a lot of files have to be backed up that are not in the same folder or are maybe pre-filtered by other software. For example maybe you want to backup files which have a name that matches a certain pattern: .. code-block:: console $ find /tmp/somefiles | grep 'PATTERN' > /tmp/files_to_backup You can then use restic to backup the filtered files: .. code-block:: console $ restic -r /srv/restic-repo backup --files-from /tmp/files_to_backup Incidentally you can also combine ``--files-from`` with the normal files args: .. code-block:: console $ restic -r /srv/restic-repo backup --files-from /tmp/files_to_backup /tmp/some_additional_file Paths in the listing file can be absolute or relative. Please note that patterns listed in a ``--files-from`` file are treated the same way as exclude patterns are, which means that beginning and trailing spaces are trimmed and special characters must be escaped. See the documentation above for more information. Comparing Snapshots ******************* Restic has a `diff` command which shows the difference between two snapshots and displays a small statistic, just pass the command two snapshot IDs: .. code-block:: console $ restic -r /srv/restic-repo diff 5845b002 2ab627a6 password is correct comparing snapshot ea657ce5 to 2ab627a6: C /restic/cmd_diff.go + /restic/foo C /restic/restic Files: 0 new, 0 removed, 2 changed Dirs: 1 new, 0 removed Others: 0 new, 0 removed Data Blobs: 14 new, 15 removed Tree Blobs: 2 new, 1 removed Added: 16.403 MiB Removed: 16.402 MiB Backing up special items and metadata ************************************* **Symlinks** are archived as symlinks, ``restic`` does not follow them. When you restore, you get the same symlink again, with the same link target and the same timestamps. If there is a **bind-mount** below a directory that is to be saved, restic descends into it. **Device files** are saved and restored as device files. This means that e.g. ``/dev/sda`` is archived as a block device file and restored as such. This also means that the content of the corresponding disk is not read, at least not from the device file. By default, restic does not save the access time (atime) for any files or other items, since it is not possible to reliably disable updating the access time by restic itself. This means that for each new backup a lot of metadata is written, and the next backup needs to write new metadata again. If you really want to save the access time for files and directories, you can pass the ``--with-atime`` option to the ``backup`` command. In filesystems that do not support inode consistency, like FUSE-based ones and pCloud, it is possible to ignore inode on changed files comparison by passing ``--ignore-inode`` to ``backup`` command. Reading data from stdin *********************** Sometimes it can be nice to directly save the output of a program, e.g. ``mysqldump`` so that the SQL can later be restored. Restic supports this mode of operation, just supply the option ``--stdin`` to the ``backup`` command like this: .. code-block:: console $ set -o pipefail $ mysqldump [...] | restic -r /srv/restic-repo backup --stdin This creates a new snapshot of the output of ``mysqldump``. You can then use e.g. the fuse mounting option (see below) to mount the repository and read the file. By default, the file name ``stdin`` is used, a different name can be specified with ``--stdin-filename``, e.g. like this: .. code-block:: console $ mysqldump [...] | restic -r /srv/restic-repo backup --stdin --stdin-filename production.sql The option ``pipefail`` is highly recommended so that a non-zero exit code from one of the programs in the pipe (e.g. ``mysqldump`` here) makes the whole chain return a non-zero exit code. Refer to the `Use the Unofficial Bash Strict Mode `__ for more details on this. Tags for backup *************** Snapshots can have one or more tags, short strings which add identifying information. Just specify the tags for a snapshot one by one with ``--tag``: .. code-block:: console $ restic -r /srv/restic-repo backup --tag projectX --tag foo --tag bar ~/work [...] The tags can later be used to keep (or forget) snapshots with the ``forget`` command. The command ``tag`` can be used to modify tags on an existing snapshot. Space requirements ****************** Restic currently assumes that your backup repository has sufficient space for the backup operation you are about to perform. This is a realistic assumption for many cloud providers, but may not be true when backing up to local disks. Should you run out of space during the middle of a backup, there will be some additional data in the repository, but the snapshot will never be created as it would only be written at the very (successful) end of the backup operation. Previous snapshots will still be there and will still work. Environment Variables ********************* In addition to command-line options, restic supports passing various options in environment variables. The following lists these environment variables: .. code-block:: console RESTIC_REPOSITORY_FILE Name of file containing the repository location (replaces --repository-file) RESTIC_REPOSITORY Location of repository (replaces -r) RESTIC_PASSWORD_FILE Location of password file (replaces --password-file) RESTIC_PASSWORD The actual password for the repository RESTIC_PASSWORD_COMMAND Command printing the password for the repository to stdout RESTIC_KEY_HINT ID of key to try decrypting first, before other keys RESTIC_CACHE_DIR Location of the cache directory RESTIC_PROGRESS_FPS Frames per second by which the progress bar is updated AWS_ACCESS_KEY_ID Amazon S3 access key ID AWS_SECRET_ACCESS_KEY Amazon S3 secret access key AWS_DEFAULT_REGION Amazon S3 default region ST_AUTH Auth URL for keystone v1 authentication ST_USER Username for keystone v1 authentication ST_KEY Password for keystone v1 authentication OS_AUTH_URL Auth URL for keystone authentication OS_REGION_NAME Region name for keystone authentication OS_USERNAME Username for keystone authentication OS_PASSWORD Password for keystone authentication OS_TENANT_ID Tenant ID for keystone v2 authentication OS_TENANT_NAME Tenant name for keystone v2 authentication OS_USER_DOMAIN_NAME User domain name for keystone authentication OS_PROJECT_NAME Project name for keystone authentication OS_PROJECT_DOMAIN_NAME Project domain name for keystone authentication OS_APPLICATION_CREDENTIAL_ID Application Credential ID (keystone v3) OS_APPLICATION_CREDENTIAL_NAME Application Credential Name (keystone v3) OS_APPLICATION_CREDENTIAL_SECRET Application Credential Secret (keystone v3) OS_STORAGE_URL Storage URL for token authentication OS_AUTH_TOKEN Auth token for token authentication B2_ACCOUNT_ID Account ID or applicationKeyId for Backblaze B2 B2_ACCOUNT_KEY Account Key or applicationKey for Backblaze B2 AZURE_ACCOUNT_NAME Account name for Azure AZURE_ACCOUNT_KEY Account key for Azure GOOGLE_PROJECT_ID Project ID for Google Cloud Storage GOOGLE_APPLICATION_CREDENTIALS Application Credentials for Google Cloud Storage (e.g. $HOME/.config/gs-secret-restic-key.json) RCLONE_BWLIMIT rclone bandwidth limit In addition to restic-specific environment variables, the following system-wide environment variables are taken into account for various operations: * ``$XDG_CACHE_HOME/restic``, ``$HOME/.cache/restic``: :ref:`caching`. * ``$TMPDIR``: :ref:`temporary_files`. * ``$PATH/fusermount``: Binary for ``restic mount``. Exit status codes ***************** Restic returns one of the following exit status codes after the backup command is run: * 0 when the backup was successful (snapshot with all source files created) * 1 when there was a fatal error (no snapshot created) * 3 when some source files could not be read (incomplete snapshot with remaining files created) Fatal errors occur for example when restic is unable to write to the backup destination, when there are network connectivity issues preventing successful communication, or when an invalid password or command line argument is provided. When restic returns this exit status code, one should not expect a snapshot to have been created. Source file read errors occur when restic fails to read one or more files or directories that it was asked to back up, e.g. due to permission problems. Restic displays the number of source file read errors that occurred while running the backup. If there are errors of this type, restic will still try to complete the backup run with all the other files, and create a snapshot that then contains all but the unreadable files. One can use these exit status codes in scripts and other automation tools, to make them aware of the outcome of the backup run. To manually inspect the exit code in e.g. Linux, run ``echo $?``.