distribution/doc/SPEC.md.tmpl

734 lines
25 KiB
Cheetah
Raw Normal View History

# Docker Registry API V2.1
> **Note**: This specification has been ported over from the proposal on
> docker/docker#9015. Much of the language in this document is still written
> in the proposal tense and needs to be converted.
## Abstract
> **TODO**: Merge this section into the overview/introduction.
The docker registry is a service to manage information about docker images and
enable their distribution. While the current registry is usable, there are
several problems with the architecture that have led to this proposal. For
relevant details, please see the following issues:
- docker/docker#8093
- docker/docker-registry#612
The main driver of this proposal are changes to the docker the image format,
covered in docker/docker#8093. The new, self-contained image manifest
simplifies the image definition and the underlying backend layout. To reduce
bandwidth usage, the new registry will be architected to avoid uploading
existing layers and will support resumable layer uploads.
While out of scope for this specification, the URI layout of the new API will
be structured to support a rich Authentication and Authorization model by
leveraging namespaces.
Furthermore, to bring docker registry in line with docker core, the registry is written in Go.
## Scope
> **TODO**: Merge this section into the overview/introduction.
This proposal covers the URL layout and protocols of the Docker Registry V2
JSON API. This will affect the docker core registry API and the rewrite of
docker-registry.
This includes the following features:
- Namespace-oriented URI Layout
- PUSH/PULL registry server for V2 image manifest format
- Resumable layer PUSH support
- V2 Client library implementation
While authentication and authorization support will influence this
specification, details of the protocol will be left to a future specification.
Other features marked as next generation will be incorporated when the initial
support is complete. Please see the road map for details.
## Use Cases
> **TODO**: Merge this section into the overview/introduction.
For the most part, the use cases of the former registry API apply to the new
version. Differentiating uses cases are covered below.
### Resumable Push
Company X's build servers lose connectivity to docker registry before
completing an image layer transfer. After connectivity returns, the build
server attempts to re-upload the image. The registry notifies the build server
that the upload has already been partially attempted. The build server
responds by only sending the remaining data to complete the image file.
### Resumable Pull
Company X is having more connectivity problems but this time in their
deployment datacenter. When downloading an image, the connection is
interrupted before completion. The client keeps the partial data and uses http
`Range` requests to avoid downloading repeated data.
### Layer Upload De-duplication
Company Y's build system creates two identical docker layers from build
processes A and B. Build process A completes uploading the layer before B.
When process B attempts to upload the layer, the registry indicates that its
not necessary because the layer is already known.
If process A and B upload the same layer at the same time, both operations
will proceed and the first to complete will be stored in the registry (Note:
we may modify this to prevent dogpile with some locking mechanism).
## Overview
This section covers client flows and details of the API endpoints. All
endpoints will be prefixed by the API version and the repository name:
/v2/<name>/
For example, an API endpoint that will work with the `library/ubuntu`
repository, the URI prefix will be:
/v2/library/ubuntu/
This scheme provides rich access control over various operations and methods
using the URI prefix and http methods that can be controlled in variety of
ways.
Classically, repository names have always been two path components where each
path component is less than 30 characters. The V2 registry API does not
enforce this. The rules for a repository name are as follows:
1. A repository name is broken up into _path components_. A component of a
repository name must be at least two characters, optionally separated by
periods, dashes or underscores. More strictly, it must match the regular
expression `[a-z0-9]+(?:[._-][a-z0-9]+)*` and the matched result must be 2
or more characters in length.
2. The name of a repository must have at least two path components, separated
by a forward slash.
3. The total length of a repository name, including slashes, must be less the
256 characters.
These name requirements _only_ apply to the registry API and should accept a
superset of what is supported by other docker ecosystem components.
All endpoints should support aggressive http caching, compression and range
headers, where appropriate. The new API attempts to leverage HTTP semantics
where possible but may break from standards to implement targeted features.
For detail on individual endpoints, please see the _Detail_ section.
### Errors
Actionable failure conditions, covered in detail in their relevant sections,
are reported as part of 4xx responses, in a json response body. One or more
errors will be returned in the following format:
{
"errors:" [{
"code": <error identifier>,
"message": <message describing condition>,
"detail": <unstructured>
},
...
]
}
The `code` field will be a unique identifier, all caps with underscores by
convention. The `message` field will be a human readable string. The optional
`detail` field may contain arbitrary json data providing information the
client can use to resolve the issue.
While the client can take action on certain error codes, the registry may add
new error codes over time. All client implementations should treat unknown
error codes as `UNKNOWN`, allowing future error codes to be added without
breaking API compatibility. For the purposes of the specification error codes
will only be added and never removed.
For a complete account of all error codes, please see the _Detail_ section.
### API Version Check
A minimal endpoint, mounted at `/v2/` will provide version support information
based on its response statuses. The request format is as follows:
GET /v2/
If a `200 OK` response is returned, the registry implements the V2(.1)
registry API and the client may proceed safely with other V2 operations.
Optionally, the response may contain information about the supported paths in
the response body. The client should be prepared to ignore this data.
If a `401 Unauthorized` response is returned, the client should take action
based on the contents of the "WWW-Authenticate" header and try the endpoint
again. Depending on access control setup, the client may still have to
authenticate against different resources, even if this check succeeds.
If `404 Not Found` response status, or other unexpected status, is returned,
the client should proceed with the assumption that the registry does not
implement V2 of the API.
### Pulling An Image
An "image" is a combination of a JSON manifest and individual layer files. The
process of pulling an image centers around retrieving these two components.
The first step in pulling an image is to retrieve the manifest. For reference,
the relevant manifest fields for the registry are the following:
field | description |
----------|------------------------------------------------|
name | The name of the image. |
tag | The tag for this version of the image. |
fsLayers | A list of layer descriptors (including tarsum) |
signature | A JWS used to verify the manifest content |
For more information about the manifest format, please see
[docker/docker#8093](https://github.com/docker/docker/issues/8093).
When the manifest is in hand, the client must verify the signature to ensure
the names and layers are valid. Once confirmed, the client will then use the
tarsums to download the individual layers. Layers are stored in as blobs in
the V2 registry API, keyed by their tarsum digest.
#### Pulling an Image Manifest
The image manifest can be fetched with the following url:
```
GET /v2/<name>/manifests/<tag>
```
The "name" and "tag" parameter identify the image and are required.
A `404 Not Found` response will be returned if the image is unknown to the
registry. If the image exists and the response is successful, the image
manifest will be returned, with the following format (see docker/docker#8093
for details):
{
"name": <name>,
"tag": <tag>,
"fsLayers": [
{
"blobSum": <tarsum>
},
...
]
],
"history": <v1 images>,
"signature": <JWS>
}
The client should verify the returned manifest signature for authenticity
before fetching layers.
#### Pulling a Layer
Layers are stored in the blob portion of the registry, keyed by tarsum digest.
Pulling a layer is carried out by a standard http request. The URL is as
follows:
GET /v2/<name>/blobs/<tarsum>
Access to a layer will be gated by the `name` of the repository but is
identified uniquely in the registry by `tarsum`. The `tarsum` parameter is an
opaque field, to be interpreted by the tarsum library.
This endpoint may issue a 307 (302 for <HTTP 1.1) redirect to another service
for downloading the layer and clients should be prepared to handle redirects.
This endpoint should support aggressive HTTP caching for image layers. Support
for Etags, modification dates and other cache control headers should be
included. To allow for incremental downloads, `Range` requests should be
supported, as well.
### Pushing An Image
Pushing an image works in the opposite order as a pull. After assembling the
image manifest, the client must first push the individual layers. When the
layers are fully pushed into the registry, the client should upload the signed
manifest.
The details of each step of the process are covered in the following sections.
#### Pushing a Layer
All layer uploads use two steps to manage the upload process. The first step
starts the upload in the registry service, returning a url to carry out the
second step. The second step uses the upload url to transfer the actual data.
Uploads are started with a POST request which returns a url that can be used
to push data and check upload status.
The `Location` header will be used to communicate the upload location after
each request. While it won't change in the this specification, clients should
use the most recent value returned by the API.
##### Starting An Upload
To begin the process, a POST request should be issued in the following format:
```
POST /v2/<name>/blobs/uploads/
```
The parameters of this request are the image namespace under which the layer
will be linked. Responses to this request are covered below.
##### Existing Layers
The existence of a layer can be checked via a `HEAD` request to the blob store
API. The request should be formatted as follows:
```
HEAD /v2/<name>/blobs/<digest>
```
If the layer with the tarsum specified in `digest` is available, a 200 OK
response will be received, with no actual body content (this is according to
http specification). The response will look as follows:
```
200 OK
Content-Length: <length of blob>
```
When this response is received, the client can assume that the layer is
already available in the registry under the given name and should take no
further action to upload the layer. Note that the binary digests may differ
for the existing registry layer, but the tarsums will be guaranteed to match.
##### Uploading the Layer
If the POST request is successful, a `202 Accepted` response will be returned
with the upload URL in the `Location` header:
```
202 Accepted
Location: /v2/<name>/blobs/uploads/<uuid>
Range: bytes=0-<offset>
Content-Length: 0
```
The rest of the upload process can be carried out with the returned url,
called the "Upload URL" from the `Location` header. All responses to the
upload url, whether sending data or getting status, will be in this format.
Though the URI format (`/v2/<name>/blobs/uploads/<uuid>`) for the `Location`
header is specified, clients should treat it as an opaque url and should never
try to assemble the it. While the `uuid` parameter may be an actual UUID, this
proposal imposes no constraints on the format and clients should never impose
any.
##### Upload Progress
The progress and chunk coordination of the upload process will be coordinated
through the `Range` header. While this is a non-standard use of the `Range`
header, there are examples of [similar approaches](https://developers.google.c
om/youtube/v3/guides/using_resumable_upload_protocol) in APIs with heavy use.
For an upload that just started, for an example with a 1000 byte layer file,
the `Range` header would be as follows:
```
Range: bytes=0-0
```
To get the status of an upload, issue a GET request to the upload URL:
```
GET /v2/<name>/blobs/uploads/<uuid>
Host: <registry host>
```
The response will be similar to the above, except will return 204 status:
```
204 No Content
Location: /v2/<name>/blobs/uploads/<uuid>
Range: bytes=0-<offset>
```
Note that the HTTP `Range` header byte ranges are inclusive and that will be
honored, even in non-standard use cases.
##### Monolithic Upload
A monolithic upload is simply a chunked upload with a single chunk and may be
favored by clients that would like to avoided the complexity of chunking. To
carry out a "monolithic" upload, one can simply put the entire content blob to
the provided URL:
```
PUT /v2/<name>/blobs/uploads/<uuid>?digest=<tarsum>[&digest=sha256:<hex digest>]
Content-Length: <size of layer>
Content-Type: application/octet-stream
<Layer Binary Data>
```
The "digest" parameter must be included with the PUT request. Please see the
_Completed Upload_ section for details on the parameters and expected
responses.
Additionally, the download can be completed with a single `POST` request to
the uploads endpoint, including the "size" and "digest" parameters:
```
POST /v2/<name>/blobs/uploads/?digest=<tarsum>[&digest=sha256:<hex digest>]
Content-Length: <size of layer>
Content-Type: application/octet-stream
<Layer Binary Data>
```
On the registry service, this should allocate a download, accept and verify
the data and return the same response as the final chunk of an upload. If the
POST request fails collecting the data in any way, the registry should attempt
to return an error response to the client with the `Location` header providing
a place to continue the download.
The single `POST` method is provided for convenience and most clients should
implement `POST` + `PUT` to support reliable resume of uploads.
##### Chunked Upload
To carry out an upload of a chunk, the client can specify a range header and
only include that part of the layer file:
```
PATCH /v2/<name>/blobs/uploads/<uuid>
Content-Length: <size of chunk>
Content-Range: <start of range>-<end of range>
Content-Type: application/octet-stream
<Layer Chunk Binary Data>
```
There is no enforcement on layer chunk splits other than that the server must
receive them in order. The server may enforce a minimum chunk size. If the
server cannot accept the chunk, a `416 Requested Range Not Satisfiable`
response will be returned and will include a `Range` header indicating the
current status:
```
416 Requested Range Not Satisfiable
Location: /v2/<name>/blobs/uploads/<uuid>
Range: 0-<last valid range>
Content-Length: 0
```
If this response is received, the client should resume from the "last valid
range" and upload the subsequent chunk. A 416 will be returned under the
following conditions:
- Invalid Content-Range header format
- Out of order chunk: the range of the next chunk must start immediately after
the "last valid range" from the previous response.
When a chunk is accepted as part of the upload, a `202 Accepted` response will
be returned, including a `Range` header with the current upload status:
```
202 Accepted
Location: /v2/<name>/blobs/uploads/<uuid>
Range: bytes=0-<offset>
Content-Length: 0
```
##### Completed Upload
For an upload to be considered complete, the client must submit a `PUT`
request on the upload endpoint with a digest parameter. If it is not provided,
the download will not be considered complete. The format for the final chunk
will be as follows:
```
PUT /v2/<name>/blob/uploads/<uuid>?digest=<tarsum>[&digest=sha256:<hex digest>]
Content-Length: <size of chunk>
Content-Range: <start of range>-<end of range>
Content-Type: application/octet-stream
<Last Layer Chunk Binary Data>
```
Optionally, if all chunks have already been uploaded, a `PUT` request with a
`digest` parameter and zero-length body may be sent to complete and validated
the upload. Multiple "digest" parameters may be provided with different
digests. The server may verify none or all of them but _must_ notify the
client if the content is rejected.
When the last chunk is received and the layer has been validated, the client
will receive a `201 Created` response:
```
201 Created
Location: /v2/<name>/blobs/<tarsum>
Content-Length: 0
```
The `Location` header will contain the registry URL to access the accepted
layer file.
###### Digest Parameter
The "digest" parameter is designed as an opaque parameter to support
verification of a successful transfer. The initial version of the registry API
will support a tarsum digest, in the standard tarsum format. For example, a
HTTP URI parameter might be as follows:
```
tarsum.v1+sha256:6c3c624b58dbbcd3c0dd82b4c53f04194d1247c6eebdaab7c610cf7d66709b3b
```
Given this parameter, the registry will verify that the provided content does
result in this tarsum. Optionally, the registry can support other other digest
parameters for non-tarfile content stored as a layer. A regular hash digest
might be specified as follows:
```
sha256:6c3c624b58dbbcd3c0dd82b4c53f04194d1247c6eebdaab7c610cf7d66709b3b
```
Such a parameter would be used to verify that the binary content (as opposed
to the tar content) would be verified at the end of the upload process.
For the initial version, registry servers are only required to support the
tarsum format.
##### Canceling an Upload
An upload can be cancelled by issuing a DELETE request to the upload endpoint.
The format will be as follows:
```
DELETE /v2/<name>/blobs/uploads/<uuid>
```
After this request is issued, the upload uuid will no longer be valid and the
registry server will dump all intermediate data. While uploads will time out
if not completed, clients should issue this request if they encounter a fatal
error but still have the ability to issue an http request.
##### Errors
If an 502, 503 or 504 error is received, the client should assume that the
download can proceed due to a temporary condition, honoring the appropriate
retry mechanism. Other 5xx errors should be treated as terminal.
If there is a problem with the upload, a 4xx error will be returned indicating
the problem. After receiving a 4xx response (except 416, as called out above),
the upload will be considered failed and the client should take appropriate
action.
Note that the upload url will not be available forever. If the upload uuid is
unknown to the registry, a `404 Not Found` response will be returned and the
client must restart the upload process.
#### Pushing an Image Manifest
Once all of the layers for an image are uploaded, the client can upload the
image manifest. An image can be pushed using the following request format:
PUT /v2/<name>/manifests/<tag>
{
"name": <name>,
"tag": <tag>,
"fsLayers": [
{
"blobSum": <tarsum>
},
...
]
],
"history": <v1 images>,
"signature": <JWS>,
...
}
The `name` and `tag` fields of the response body must match those specified in
the URL.
If there is a problem with pushing the manifest, a relevant 4xx response will
be returned with a JSON error message. Please see the _PUT Manifest section
for details on possible error codes that may be returned.
If one or more layers are unknown to the registry, `BLOB_UNKNOWN` errors are
returned. The `detail` field of the error response will have a `digest` field
identifying the missing blob, which will be a tarsum. An error is returned for
each unknown blob. The response format is as follows:
{
"errors:" [{
"code": "BLOB_UNKNOWN",
"message": "blob unknown to registry",
"detail": {
"digest": <tarsum>
}
},
...
]
}
#### Listing Image Tags
It may be necessary to list all of the tags under a given repository. The tags
for an image repository can be retrieved with the following request:
GET /v2/<name>/tags/list
The response will be in the following format:
200 OK
Content-Type: application/json
{
"name": <name>,
"tags": [
<tag>,
...
]
}
For repositories with a large number of tags, this response may be quite
large, so care should be taken by the client when parsing the response to
reduce copying.
### Deleting an Image
An image may be deleted from the registry via its `name` and `tag`. A delete
may be issued with the following request format:
DELETE /v2/<name>/manifests/<tag>
If the image exists and has been successfully deleted, the following response
will be issued:
202 Accepted
Content-Length: None
If the image had already been deleted or did not exist, a `404 Not Found`
response will be issued instead.
## Detail
> **Note**: This section is still under construction. For the purposes of
> implementation, if any details below differ from the described request flows
> above, the section below should be corrected. When they match, this note
> should be removed.
The behavior of the endpoints are covered in detail in this section, organized
by route and entity. All aspects of the request and responses are covered,
including headers, parameters and body formats. Examples of requests and their
corresponding responses, with success and failure, are enumerated.
> **Note**: The sections on endpoint detail are arranged with an example
> request, a description of the request, followed by information about that
> request.
A list of methods and URIs are covered in the table below:
|Method|Path|Entity|Description|
-------|----|------|------------
{{range $route := .RouteDescriptors}}{{range $method := .Methods}}| {{$method.Method}} | `{{$route.Path|prettygorilla}}` | {{$route.Entity}} | {{$method.Description}} |
{{end}}{{end}}
The detail for each endpoint is covered in the following sections.
### Errors
The error codes encountered via the API are enumerated in the following table:
|Code|Message|Description|
-------|----|------|------------
{{range $err := .ErrorDescriptors}} `{{$err.Value}}` | {{$err.Message}} | {{$err.Description|removenewlines}}
{{end}}
{{range $route := .RouteDescriptors}}
### {{.Entity}}
{{.Description}}
{{range $method := $route.Methods}}
#### {{.Method}} {{$route.Entity}}
{{.Description}}
{{if .Requests}}{{range .Requests}}
##### {{.Name}}
```
{{$method.Method}} {{$route.Path|prettygorilla}}{{if .QueryParameters}}?{{range .QueryParameters}}{{.Name}}={{.Format}}{{end}}{{end}}{{range .Headers}}
{{.Name}}: {{.Format}}{{end}}{{if .Body.ContentType}}
Content-Type: {{.Body.ContentType}}{{end}}{{if .Body.Format}}
{{.Body.Format}}{{end}}
```
{{.Description}}
{{if or .Headers .PathParameters .QueryParameters}}
The following parameters should be specified on the request:
|Name|Kind|Description|
|----|----|-----------|
{{range .Headers}}|`{{.Name}}`|header|{{.Description}}|
{{end}}{{range .PathParameters}}|`{{.Name}}`|path|{{.Description}}|
{{end}}{{range .QueryParameters}}|`{{.Name}}`|query|{{.Description}}|
{{end}}{{end}}
{{if .Successes}}
{{range .Successes}}
###### On Success: {{if .Name}}{{.Name}}{{else}}{{.StatusCode | statustext}}{{end}}
```
{{.StatusCode}} {{.StatusCode | statustext}}{{range .Headers}}
{{.Name}}: {{.Format}}{{end}}{{if .Body.ContentType}}
Content-Type: {{.Body.ContentType}}{{end}}{{if .Body.Format}}
{{.Body.Format}}{{end}}
```
{{.Description}}{{if .Headers}}
The following headers will be returned on the response:
|Name|Description|
|----|-----------|
{{range .Headers}}|`{{.Name}}`|{{.Description}}|
{{end}}{{end}}{{end}}{{end}}
{{if .Failures}}
{{range .Failures}}
###### On Failure: {{if .Name}}{{.Name}}{{else}}{{.StatusCode | statustext}}{{end}}
```
{{.StatusCode}} {{.StatusCode | statustext}}{{range .Headers}}
{{.Name}}: {{.Format}}{{end}}{{if .Body.ContentType}}
Content-Type: {{.Body.ContentType}}{{end}}{{if .Body.Format}}
{{.Body.Format}}{{end}}
```
{{.Description}}
{{if .Headers}}
The following headers will be returned on the response:
|Name|Description|
|----|-----------|
{{range .Headers}}|`{{.Name}}`|{{.Description}}|
{{end}}{{end}}
{{if .ErrorCodes}}
The error codes that may be included in the response body are enumerated below:
|Code|Message|Description|
-------|----|------|------------
{{range $err := .ErrorCodes}}| `{{$err}}` | {{$err.Descriptor.Message}} | {{$err.Descriptor.Description|removenewlines}} |
{{end}}
{{end}}{{end}}{{end}}{{end}}{{end}}{{end}}
{{end}}