spec: fetch manifests by tag or digest
Manifests are now fetched by a field called "reference", which may be a tag or a digest. When using digests to reference a manifest, the data is immutable. The routes and specification have been updated to allow this. There are a few caveats to this approach: 1. It may be problematic to rely on data format to differentiate between a tag and a digest. Currently, they are disjoint but there may modifications on either side that break this guarantee. 2. The caching characteristics of returned content are very different for digest versus tag-based references. Digest urls can be cached forever while tag urls cannot. Both of these are minimal caveats that we can live with in the future. Signed-off-by: Stephen J Day <stephen.day@docker.com>pull/211/head
Stephen J Day
parent
0418788239
commit
f536633ca8
|
|
@ -106,9 +106,20 @@ changes. Only non-conflicting additions should be made to the API and accepted
|
|||
changes should avoid preventing future changes from happening.
|
||||
|
||||
This section should be updated when changes are made to the specification,
|
||||
indicating what is different. Optionally, we may start marking parts of the specification to correspond with the versions enumerated here.
|
||||
indicating what is different. Optionally, we may start marking parts of the
|
||||
specification to correspond with the versions enumerated here.
|
||||
|
||||
<dl>
|
||||
<dt>2.0.1</dt>
|
||||
<dd>
|
||||
<ul>
|
||||
<li>Added support for immutable manifest references in manifest endpoints.</li>
|
||||
<li>Deleting a manifest by tag has been deprecated.</li>
|
||||
<li>Specified `Docker-Content-Digest` header for appropriate entities.</li>
|
||||
<li>Added error code for unsupported operations.</li>
|
||||
</ul>
|
||||
</dd>
|
||||
|
||||
<dt>2.0</dt>
|
||||
<dd>
|
||||
This is the baseline specification.
|
||||
|
|
@ -235,10 +246,11 @@ the V2 registry API, keyed by their tarsum digest.
|
|||
The image manifest can be fetched with the following url:
|
||||
|
||||
```
|
||||
GET /v2/<name>/manifests/<tag>
|
||||
GET /v2/<name>/manifests/<reference>
|
||||
```
|
||||
|
||||
The "name" and "tag" parameter identify the image and are required.
|
||||
The `name` and `reference` parameter identify the image and are required. The
|
||||
reference may include a tag or digest.
|
||||
|
||||
A `404 Not Found` response will be returned if the image is unknown to the
|
||||
registry. If the image exists and the response is successful, the image
|
||||
|
|
@ -330,6 +342,7 @@ http specification). The response will look as follows:
|
|||
```
|
||||
200 OK
|
||||
Content-Length: <length of blob>
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
When this response is received, the client can assume that the layer is
|
||||
|
|
@ -509,10 +522,14 @@ will receive a `201 Created` response:
|
|||
201 Created
|
||||
Location: /v2/<name>/blobs/<tarsum>
|
||||
Content-Length: 0
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
The `Location` header will contain the registry URL to access the accepted
|
||||
layer file.
|
||||
layer file. The `Docker-Content-Digest` header returns the canonical digest of
|
||||
the uploaded blob which may differ from the provided digest. Most clients may
|
||||
ignore the value but if it is used, the client should verify the value against
|
||||
the uploaded blob data.
|
||||
|
||||
###### Digest Parameter
|
||||
|
||||
|
|
@ -574,7 +591,7 @@ client must restart the upload process.
|
|||
Once all of the layers for an image are uploaded, the client can upload the
|
||||
image manifest. An image can be pushed using the following request format:
|
||||
|
||||
PUT /v2/<name>/manifests/<tag>
|
||||
PUT /v2/<name>/manifests/<reference>
|
||||
|
||||
{
|
||||
"name": <name>,
|
||||
|
|
@ -591,8 +608,8 @@ image manifest. An image can be pushed using the following request format:
|
|||
...
|
||||
}
|
||||
|
||||
The `name` and `tag` fields of the response body must match those specified in
|
||||
the URL.
|
||||
The `name` and `reference` fields of the response body must match those specified in
|
||||
the URL. The `reference` field may be a "tag" or a "digest".
|
||||
|
||||
If there is a problem with pushing the manifest, a relevant 4xx response will
|
||||
be returned with a JSON error message. Please see the _PUT Manifest section
|
||||
|
|
@ -641,13 +658,14 @@ reduce copying.
|
|||
|
||||
### Deleting an Image
|
||||
|
||||
An image may be deleted from the registry via its `name` and `tag`. A delete
|
||||
may be issued with the following request format:
|
||||
An image may be deleted from the registry via its `name` and `reference`. A
|
||||
delete may be issued with the following request format:
|
||||
|
||||
DELETE /v2/<name>/manifests/<tag>
|
||||
DELETE /v2/<name>/manifests/<reference>
|
||||
|
||||
If the image exists and has been successfully deleted, the following response
|
||||
will be issued:
|
||||
For deletes, `reference` *must* be a digest or the delete will fail. If the
|
||||
image exists and has been successfully deleted, the following response will be
|
||||
issued:
|
||||
|
||||
202 Accepted
|
||||
Content-Length: None
|
||||
|
|
@ -677,9 +695,9 @@ A list of methods and URIs are covered in the table below:
|
|||
-------|----|------|------------
|
||||
| GET | `/v2/` | Base | Check that the endpoint implements Docker Registry API V2. |
|
||||
| GET | `/v2/<name>/tags/list` | Tags | Fetch the tags under the repository identified by `name`. |
|
||||
| GET | `/v2/<name>/manifests/<tag>` | Manifest | Fetch the manifest identified by `name` and `tag`. |
|
||||
| PUT | `/v2/<name>/manifests/<tag>` | Manifest | Put the manifest identified by `name` and `tag`. |
|
||||
| DELETE | `/v2/<name>/manifests/<tag>` | Manifest | Delete the manifest identified by `name` and `tag`. |
|
||||
| GET | `/v2/<name>/manifests/<reference>` | Manifest | Fetch the manifest identified by `name` and `reference` where `reference` can be a tag or digest. |
|
||||
| PUT | `/v2/<name>/manifests/<reference>` | Manifest | Put the manifest identified by `name` and `reference` where `reference` can be a tag or digest. |
|
||||
| DELETE | `/v2/<name>/manifests/<reference>` | Manifest | Delete the manifest identified by `name` and `reference` where `reference` can be a tag or digest. |
|
||||
| GET | `/v2/<name>/blobs/<digest>` | Blob | Retrieve the blob from the registry identified by `digest`. A `HEAD` request can also be issued to this endpoint to obtain resource information without receiving all data. |
|
||||
| POST | `/v2/<name>/blobs/uploads/` | Intiate Blob Upload | Initiate a resumable blob upload. If successful, an upload location will be provided to complete the upload. Optionally, if the `digest` parameter is present, the request body will be used to complete the upload in a single request. |
|
||||
| GET | `/v2/<name>/blobs/uploads/<uuid>` | Blob Upload | Retrieve status of upload identified by `uuid`. The primary purpose of this endpoint is to resolve the current status of a resumable upload. |
|
||||
|
|
@ -697,6 +715,7 @@ The error codes encountered via the API are enumerated in the following table:
|
|||
|Code|Message|Description|
|
||||
-------|----|------|------------
|
||||
`UNKNOWN` | unknown error | Generic error returned when the error does not have an API classification.
|
||||
`UNSUPPORTED` | The operation is unsupported. | The operation was unsupported due to a missing implementation or invalid set of parameters.
|
||||
`UNAUTHORIZED` | access to the requested resource is not authorized | The access controller denied access for the operation on a resource. Often this will be accompanied by a 401 Unauthorized response status.
|
||||
`DIGEST_INVALID` | provided digest did not match uploaded content | When a blob is uploaded, the registry will check that the content matches the digest provided by the client. The error may include a detail structure with the key "digest", including the invalid digest string. This error may also be returned when a manifest includes an invalid layer digest.
|
||||
`SIZE_INVALID` | provided length did not match content length | When a layer is uploaded, the provided size will be checked against the uploaded content. If they do not match, this error will be returned.
|
||||
|
|
@ -933,12 +952,12 @@ Create, update and retrieve manifests.
|
|||
|
||||
#### GET Manifest
|
||||
|
||||
Fetch the manifest identified by `name` and `tag`.
|
||||
Fetch the manifest identified by `name` and `reference` where `reference` can be a tag or digest.
|
||||
|
||||
|
||||
|
||||
```
|
||||
GET /v2/<name>/manifests/<tag>
|
||||
GET /v2/<name>/manifests/<reference>
|
||||
Host: <registry host>
|
||||
Authorization: <scheme> <token>
|
||||
```
|
||||
|
|
@ -962,6 +981,7 @@ The following parameters should be specified on the request:
|
|||
|
||||
```
|
||||
200 OK
|
||||
Docker-Content-Digest: <digest>
|
||||
Content-Type: application/json; charset=utf-8
|
||||
|
||||
{
|
||||
|
|
@ -979,8 +999,13 @@ Content-Type: application/json; charset=utf-8
|
|||
}
|
||||
```
|
||||
|
||||
The manifest idenfied by `name` and `tag`. The contents can be used to identify and resolve resources required to run the specified image.
|
||||
The manifest idenfied by `name` and `reference`. The contents can be used to identify and resolve resources required to run the specified image.
|
||||
|
||||
The following headers will be returned with the response:
|
||||
|
||||
|Name|Description|
|
||||
|----|-----------|
|
||||
|`Docker-Content-Digest`|Digest of the targeted content for the request.|
|
||||
|
||||
|
||||
|
||||
|
|
@ -1003,7 +1028,7 @@ Content-Type: application/json; charset=utf-8
|
|||
}
|
||||
```
|
||||
|
||||
The name or tag was invalid.
|
||||
The name or reference was invalid.
|
||||
|
||||
|
||||
|
||||
|
|
@ -1080,12 +1105,12 @@ The error codes that may be included in the response body are enumerated below:
|
|||
|
||||
#### PUT Manifest
|
||||
|
||||
Put the manifest identified by `name` and `tag`.
|
||||
Put the manifest identified by `name` and `reference` where `reference` can be a tag or digest.
|
||||
|
||||
|
||||
|
||||
```
|
||||
PUT /v2/<name>/manifests/<tag>
|
||||
PUT /v2/<name>/manifests/<reference>
|
||||
Host: <registry host>
|
||||
Authorization: <scheme> <token>
|
||||
Content-Type: application/json; charset=utf-8
|
||||
|
|
@ -1126,6 +1151,7 @@ The following parameters should be specified on the request:
|
|||
202 Accepted
|
||||
Location: <url>
|
||||
Content-Length: 0
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
The manifest has been accepted by the registry and is stored under the specified `name` and `tag`.
|
||||
|
|
@ -1136,6 +1162,7 @@ The following headers will be returned with the response:
|
|||
|----|-----------|
|
||||
|`Location`|The canonical location url of the uploaded manifest.|
|
||||
|`Content-Length`|The `Content-Length` header must be zero and the body must be empty.|
|
||||
|`Docker-Content-Digest`|Digest of the targeted content for the request.|
|
||||
|
||||
|
||||
|
||||
|
|
@ -1277,12 +1304,12 @@ The error codes that may be included in the response body are enumerated below:
|
|||
|
||||
#### DELETE Manifest
|
||||
|
||||
Delete the manifest identified by `name` and `tag`.
|
||||
Delete the manifest identified by `name` and `reference` where `reference` can be a tag or digest.
|
||||
|
||||
|
||||
|
||||
```
|
||||
DELETE /v2/<name>/manifests/<tag>
|
||||
DELETE /v2/<name>/manifests/<reference>
|
||||
Host: <registry host>
|
||||
Authorization: <scheme> <token>
|
||||
```
|
||||
|
|
@ -1456,6 +1483,7 @@ The following parameters should be specified on the request:
|
|||
```
|
||||
200 OK
|
||||
Content-Length: <length>
|
||||
Docker-Content-Digest: <digest>
|
||||
Content-Type: application/octet-stream
|
||||
|
||||
<blob binary data>
|
||||
|
|
@ -1468,12 +1496,14 @@ The following headers will be returned with the response:
|
|||
|Name|Description|
|
||||
|----|-----------|
|
||||
|`Content-Length`|The length of the requested blob content.|
|
||||
|`Docker-Content-Digest`|Digest of the targeted content for the request.|
|
||||
|
||||
###### On Success: Temporary Redirect
|
||||
|
||||
```
|
||||
307 Temporary Redirect
|
||||
Location: <blob location>
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
The blob identified by `digest` is available at the provided location.
|
||||
|
|
@ -1483,6 +1513,7 @@ The following headers will be returned with the response:
|
|||
|Name|Description|
|
||||
|----|-----------|
|
||||
|`Location`|The location where the layer should be accessible.|
|
||||
|`Docker-Content-Digest`|Digest of the targeted content for the request.|
|
||||
|
||||
|
||||
|
||||
|
|
@ -2345,6 +2376,7 @@ The following parameters should be specified on the request:
|
|||
Location: <blob location>
|
||||
Content-Range: <start of range>-<end of range, inclusive>
|
||||
Content-Length: <length of chunk>
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
The upload has been completed and accepted by the registry. The canonical location will be available in the `Location` header.
|
||||
|
|
@ -2356,6 +2388,7 @@ The following headers will be returned with the response:
|
|||
|`Location`||
|
||||
|`Content-Range`|Range of bytes identifying the desired block of content represented by the body. Start must match the end of offset retrieved via status check. Note that this is a non-standard use of the `Content-Range` header.|
|
||||
|`Content-Length`|Length of the chunk being uploaded, corresponding the length of the request body.|
|
||||
|`Docker-Content-Digest`|Digest of the targeted content for the request.|
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -106,9 +106,20 @@ changes. Only non-conflicting additions should be made to the API and accepted
|
|||
changes should avoid preventing future changes from happening.
|
||||
|
||||
This section should be updated when changes are made to the specification,
|
||||
indicating what is different. Optionally, we may start marking parts of the specification to correspond with the versions enumerated here.
|
||||
indicating what is different. Optionally, we may start marking parts of the
|
||||
specification to correspond with the versions enumerated here.
|
||||
|
||||
<dl>
|
||||
<dt>2.0.1</dt>
|
||||
<dd>
|
||||
<ul>
|
||||
<li>Added support for immutable manifest references in manifest endpoints.</li>
|
||||
<li>Deleting a manifest by tag has been deprecated.</li>
|
||||
<li>Specified `Docker-Content-Digest` header for appropriate entities.</li>
|
||||
<li>Added error code for unsupported operations.</li>
|
||||
</ul>
|
||||
</dd>
|
||||
|
||||
<dt>2.0</dt>
|
||||
<dd>
|
||||
This is the baseline specification.
|
||||
|
|
@ -235,10 +246,11 @@ the V2 registry API, keyed by their tarsum digest.
|
|||
The image manifest can be fetched with the following url:
|
||||
|
||||
```
|
||||
GET /v2/<name>/manifests/<tag>
|
||||
GET /v2/<name>/manifests/<reference>
|
||||
```
|
||||
|
||||
The "name" and "tag" parameter identify the image and are required.
|
||||
The `name` and `reference` parameter identify the image and are required. The
|
||||
reference may include a tag or digest.
|
||||
|
||||
A `404 Not Found` response will be returned if the image is unknown to the
|
||||
registry. If the image exists and the response is successful, the image
|
||||
|
|
@ -330,6 +342,7 @@ http specification). The response will look as follows:
|
|||
```
|
||||
200 OK
|
||||
Content-Length: <length of blob>
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
When this response is received, the client can assume that the layer is
|
||||
|
|
@ -509,10 +522,14 @@ will receive a `201 Created` response:
|
|||
201 Created
|
||||
Location: /v2/<name>/blobs/<tarsum>
|
||||
Content-Length: 0
|
||||
Docker-Content-Digest: <digest>
|
||||
```
|
||||
|
||||
The `Location` header will contain the registry URL to access the accepted
|
||||
layer file.
|
||||
layer file. The `Docker-Content-Digest` header returns the canonical digest of
|
||||
the uploaded blob which may differ from the provided digest. Most clients may
|
||||
ignore the value but if it is used, the client should verify the value against
|
||||
the uploaded blob data.
|
||||
|
||||
###### Digest Parameter
|
||||
|
||||
|
|
@ -574,7 +591,7 @@ client must restart the upload process.
|
|||
Once all of the layers for an image are uploaded, the client can upload the
|
||||
image manifest. An image can be pushed using the following request format:
|
||||
|
||||
PUT /v2/<name>/manifests/<tag>
|
||||
PUT /v2/<name>/manifests/<reference>
|
||||
|
||||
{
|
||||
"name": <name>,
|
||||
|
|
@ -591,8 +608,8 @@ image manifest. An image can be pushed using the following request format:
|
|||
...
|
||||
}
|
||||
|
||||
The `name` and `tag` fields of the response body must match those specified in
|
||||
the URL.
|
||||
The `name` and `reference` fields of the response body must match those specified in
|
||||
the URL. The `reference` field may be a "tag" or a "digest".
|
||||
|
||||
If there is a problem with pushing the manifest, a relevant 4xx response will
|
||||
be returned with a JSON error message. Please see the _PUT Manifest section
|
||||
|
|
@ -641,13 +658,14 @@ reduce copying.
|
|||
|
||||
### Deleting an Image
|
||||
|
||||
An image may be deleted from the registry via its `name` and `tag`. A delete
|
||||
may be issued with the following request format:
|
||||
An image may be deleted from the registry via its `name` and `reference`. A
|
||||
delete may be issued with the following request format:
|
||||
|
||||
DELETE /v2/<name>/manifests/<tag>
|
||||
DELETE /v2/<name>/manifests/<reference>
|
||||
|
||||
If the image exists and has been successfully deleted, the following response
|
||||
will be issued:
|
||||
For deletes, `reference` *must* be a digest or the delete will fail. If the
|
||||
image exists and has been successfully deleted, the following response will be
|
||||
issued:
|
||||
|
||||
202 Accepted
|
||||
Content-Length: None
|
||||
|
|
|
|||
|
|
@ -79,6 +79,13 @@ var (
|
|||
Format: "<uuid>",
|
||||
}
|
||||
|
||||
digestHeader = ParameterDescriptor{
|
||||
Name: "Docker-Content-Digest",
|
||||
Description: "Digest of the targeted content for the request.",
|
||||
Type: "digest",
|
||||
Format: "<digest>",
|
||||
}
|
||||
|
||||
unauthorizedResponse = ResponseDescriptor{
|
||||
Description: "The client does not have access to the repository.",
|
||||
StatusCode: http.StatusUnauthorized,
|
||||
|
|
@ -454,13 +461,13 @@ var routeDescriptors = []RouteDescriptor{
|
|||
},
|
||||
{
|
||||
Name: RouteNameManifest,
|
||||
Path: "/v2/{name:" + RepositoryNameRegexp.String() + "}/manifests/{tag:" + TagNameRegexp.String() + "}",
|
||||
Path: "/v2/{name:" + RepositoryNameRegexp.String() + "}/manifests/{reference:" + TagNameRegexp.String() + "|" + digest.DigestRegexp.String() + "}",
|
||||
Entity: "Manifest",
|
||||
Description: "Create, update and retrieve manifests.",
|
||||
Methods: []MethodDescriptor{
|
||||
{
|
||||
Method: "GET",
|
||||
Description: "Fetch the manifest identified by `name` and `tag`.",
|
||||
Description: "Fetch the manifest identified by `name` and `reference` where `reference` can be a tag or digest.",
|
||||
Requests: []RequestDescriptor{
|
||||
{
|
||||
Headers: []ParameterDescriptor{
|
||||
|
|
@ -473,8 +480,11 @@ var routeDescriptors = []RouteDescriptor{
|
|||
},
|
||||
Successes: []ResponseDescriptor{
|
||||
{
|
||||
Description: "The manifest idenfied by `name` and `tag`. The contents can be used to identify and resolve resources required to run the specified image.",
|
||||
Description: "The manifest idenfied by `name` and `reference`. The contents can be used to identify and resolve resources required to run the specified image.",
|
||||
StatusCode: http.StatusOK,
|
||||
Headers: []ParameterDescriptor{
|
||||
digestHeader,
|
||||
},
|
||||
Body: BodyDescriptor{
|
||||
ContentType: "application/json; charset=utf-8",
|
||||
Format: manifestBody,
|
||||
|
|
@ -483,7 +493,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
},
|
||||
Failures: []ResponseDescriptor{
|
||||
{
|
||||
Description: "The name or tag was invalid.",
|
||||
Description: "The name or reference was invalid.",
|
||||
StatusCode: http.StatusBadRequest,
|
||||
ErrorCodes: []ErrorCode{
|
||||
ErrorCodeNameInvalid,
|
||||
|
|
@ -523,7 +533,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
},
|
||||
{
|
||||
Method: "PUT",
|
||||
Description: "Put the manifest identified by `name` and `tag`.",
|
||||
Description: "Put the manifest identified by `name` and `reference` where `reference` can be a tag or digest.",
|
||||
Requests: []RequestDescriptor{
|
||||
{
|
||||
Headers: []ParameterDescriptor{
|
||||
|
|
@ -550,6 +560,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
Format: "<url>",
|
||||
},
|
||||
contentLengthZeroHeader,
|
||||
digestHeader,
|
||||
},
|
||||
},
|
||||
},
|
||||
|
|
@ -628,7 +639,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
},
|
||||
{
|
||||
Method: "DELETE",
|
||||
Description: "Delete the manifest identified by `name` and `tag`.",
|
||||
Description: "Delete the manifest identified by `name` and `reference` where `reference` can be a tag or digest.",
|
||||
Requests: []RequestDescriptor{
|
||||
{
|
||||
Headers: []ParameterDescriptor{
|
||||
|
|
@ -729,6 +740,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
Description: "The length of the requested blob content.",
|
||||
Format: "<length>",
|
||||
},
|
||||
digestHeader,
|
||||
},
|
||||
Body: BodyDescriptor{
|
||||
ContentType: "application/octet-stream",
|
||||
|
|
@ -745,6 +757,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
Description: "The location where the layer should be accessible.",
|
||||
Format: "<blob location>",
|
||||
},
|
||||
digestHeader,
|
||||
},
|
||||
},
|
||||
},
|
||||
|
|
@ -1193,6 +1206,7 @@ var routeDescriptors = []RouteDescriptor{
|
|||
Format: "<length of chunk>",
|
||||
Description: "Length of the chunk being uploaded, corresponding the length of the request body.",
|
||||
},
|
||||
digestHeader,
|
||||
},
|
||||
},
|
||||
},
|
||||
|
|
@ -1312,6 +1326,13 @@ var errorDescriptors = []ErrorDescriptor{
|
|||
Description: `Generic error returned when the error does not have an
|
||||
API classification.`,
|
||||
},
|
||||
{
|
||||
Code: ErrorCodeUnsupported,
|
||||
Value: "UNSUPPORTED",
|
||||
Message: "The operation is unsupported.",
|
||||
Description: `The operation was unsupported due to a missing
|
||||
implementation or invalid set of parameters.`,
|
||||
},
|
||||
{
|
||||
Code: ErrorCodeUnauthorized,
|
||||
Value: "UNAUTHORIZED",
|
||||
|
|
|
|||
|
|
@ -13,6 +13,9 @@ const (
|
|||
// ErrorCodeUnknown is a catch-all for errors not defined below.
|
||||
ErrorCodeUnknown ErrorCode = iota
|
||||
|
||||
// ErrorCodeUnsupported is returned when an operation is not supported.
|
||||
ErrorCodeUnsupported
|
||||
|
||||
// ErrorCodeUnauthorized is returned if a request is not authorized.
|
||||
ErrorCodeUnauthorized
|
||||
|
||||
|
|
|
|||
|
|
@ -39,16 +39,24 @@ func TestRouter(t *testing.T) {
|
|||
RouteName: RouteNameManifest,
|
||||
RequestURI: "/v2/foo/manifests/bar",
|
||||
Vars: map[string]string{
|
||||
"name": "foo",
|
||||
"tag": "bar",
|
||||
"name": "foo",
|
||||
"reference": "bar",
|
||||
},
|
||||
},
|
||||
{
|
||||
RouteName: RouteNameManifest,
|
||||
RequestURI: "/v2/foo/bar/manifests/tag",
|
||||
Vars: map[string]string{
|
||||
"name": "foo/bar",
|
||||
"tag": "tag",
|
||||
"name": "foo/bar",
|
||||
"reference": "tag",
|
||||
},
|
||||
},
|
||||
{
|
||||
RouteName: RouteNameManifest,
|
||||
RequestURI: "/v2/foo/bar/manifests/sha256:abcdef01234567890",
|
||||
Vars: map[string]string{
|
||||
"name": "foo/bar",
|
||||
"reference": "sha256:abcdef01234567890",
|
||||
},
|
||||
},
|
||||
{
|
||||
|
|
@ -112,8 +120,8 @@ func TestRouter(t *testing.T) {
|
|||
RouteName: RouteNameManifest,
|
||||
RequestURI: "/v2/foo/bar/manifests/manifests/tags",
|
||||
Vars: map[string]string{
|
||||
"name": "foo/bar/manifests",
|
||||
"tag": "tags",
|
||||
"name": "foo/bar/manifests",
|
||||
"reference": "tags",
|
||||
},
|
||||
},
|
||||
{
|
||||
|
|
|
|||
|
|
@ -107,11 +107,12 @@ func (ub *URLBuilder) BuildTagsURL(name string) (string, error) {
|
|||
return tagsURL.String(), nil
|
||||
}
|
||||
|
||||
// BuildManifestURL constructs a url for the manifest identified by name and tag.
|
||||
func (ub *URLBuilder) BuildManifestURL(name, tag string) (string, error) {
|
||||
// BuildManifestURL constructs a url for the manifest identified by name and
|
||||
// reference. The argument reference may be either a tag or digest.
|
||||
func (ub *URLBuilder) BuildManifestURL(name, reference string) (string, error) {
|
||||
route := ub.cloneRoute(RouteNameManifest)
|
||||
|
||||
manifestURL, err := route.URL("name", name, "tag", tag)
|
||||
manifestURL, err := route.URL("name", name, "reference", reference)
|
||||
if err != nil {
|
||||
return "", err
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue