Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
If a schema 1 manifest is uploaded with the `disablesignaturestore` option set
to true, then no signatures will exist. Handle this case.
If a schema 1 manifest is pushed, deleted, garbage collected and pushed again, the
repository will contain signature links from the first version, but the blobs will
not exist. Disable the signature store in the garbage-collect command so
signatures are not fetched.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
In 326c3a9c49, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
This makes content type sniffing cleaner. The document just needs to be
decoded into a manifest.Versioned structure. It's no longer a two-step
process.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Create signedManifestHandler and schema2ManifestHandler. Use these to
unmarshal and put the respective types of manifests from manifestStore.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a manifest is deleted by digest, look up the referenced tags in the tag
store and remove all associations.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The current implementation of digest.FromBytes returns an error. This
error can never be non-nil, but its presence in the function signature
means each call site needs error handling code for an error that is
always nil.
I verified that none of the hash.Hash implementations in the standard
library can return an error on Write. Nor can any of the hash.Hash
implementations vendored in distribution.
This commit changes digest.FromBytes not to return an error. If Write
returns an error, it will panic, but as discussed above, this should
never happen.
This commit also avoids using a bytes.Reader to feed data into the hash
function in FromBytes. This makes the hypothetical case that would panic
a bit more explicit, and should also be more performant.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes both the s3 driver and the oss driver to return the unmunged path
when returning errors.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swift returns an empty object list when trying to read a non-existing object path, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: David li <wenquan.li@hpe.com>
RADOS returns a -EIO when trying to read a non-existing OMAP, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Issue #1186 describes a condition where a null tags response is returned when
using the s3 driver. The issue seems to be related to a missing
PathNotFoundError in s3. This change adds a test for that to get an idea of the
lack of compliance across storage drivers. If the failures are manageable,
we'll add this test condition and fix the s3 driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change removes the sort() from the Repositories() function since
we're now guaranteed to have a lexigraphically sorted walk.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
The Delete method lists objects under the given path and tries to delete
all of them with a bulk delete request. If the path has no objects
underneath it, the body of this request will be empty, which causes
HTTP-level issues. Specifically, Go's HTTP client senses the empty
request buffer and doesn't include a Content-Length, which causes the
Swift server to fail the request.
This commit fixes the problem by avoiding sending empty bulk delete
requests. This is the correct thing to do anyway, since there's no
reason to request deletion of zero objects.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
contains equal length History and FSLayer arrays.
This is required to prevent malformed manifests being put to the registry and
failing external verification checks.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Errors thrown by storage drivers don't have the name of the driver, causing user
confusion about whether the error is coming from Docker or from a storage driver.
This change adds the storage driver name to each error message.
This required changing ErrUnsupportedDriver to a type, leading to code changes
whenever ErrUnsupportedDriver is used. The tests check whether the driver name
appears in the error message.
Signed-off-by: Amit Shukla <amit.shukla@docker.com>
There seems to be a need for a type that represents a way of pointing
to an image, irrespective of the implementation.
This patch defines a Reference interface and provides 3 implementations:
- TagReference: when only a tag is provided
- DigestReference: when a digest (according to the digest package) is
provided, can include optional tag as well
Validation of references are purely syntactic.
There is also a strong type for tags, analogous to digests, as well
as a strong type for Repository from which clients can access the
hostname alone, or the repository name without the hostname, or both
together via the String() method.
For Repository, the files names.go and names_test.go were moved from
the v2 package.
Signed-off-by: Tibor Vass <tibor@docker.com>
The "testing" package adds some flags in its init function, so utilities
that import distribution code may print a page of extra testing flags in
their help output.
This commit solves the issue by moving an import of "testing" in the
registry/storage/cache package to a new
registry/storage/cache/cachecheck package, which is only imported by
tests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
In the S3 storage driver there is currently an initial access permission check by listing the bucket. If this check fails, registry will panic and exit.
However, this check is broken in two ways. First of all it strips the final slash from the root directory path, meaning that any access permissions which limit access to a single directory will fail, because S3 treats the path as strict prefix match. Secondly it fails to strip any leading slash that might be present, unlike the other access places, which means that the path used is different as a leading slash is allowed and significant in a filename in S3.
Since there is also a periodic health check which correctly checks access permissions and shows the error more cleanly, the best solution seems to be to just remove this initial access check.
Signed-off-by: Nuutti Kotivuori <nuutti.kotivuori@poplatek.fi>
As we begin our march towards multi-arch, we must prepare for the reality of
multiple manifest schemas. This is the beginning of a set of changes to
facilitate this. We are both moving this package into its target position where
it may live peacefully next to other manfiest versions.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Clean up calling convention for NewRegistryWithDriver to use functional
arguments.
This is a first step towards the refactor described in #215. I plan to
add additional options in the process of moving configurable items from
the App structure to the registry structure.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The use of the pathMapper is no longer needed the way we have organized the
code base. The extra level of indirection has proved unnecessary and confusing
so we've opted to clean it up. In the future, we may require more flexibility,
but now it is simply not required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Unfortunately, the 2.1 releease has written manfiest links into the wrong
directory. This doesn't affect new 2.1 deployments but fixing this to be 2.0
backwards compatible has broken 2.1.0 compatibility. To ensure we have
compatibility between 2.0, 2.1.0 and future releases, we now check one of
several locations to identify a manifest link.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Unfortunately, the refactor used the incorrect path for manifest links within a
repository. While this didn't stop the registry from working, it did break
compatibility with 2.0 deployments for manifest fetches.
Tests were added to ensure these are locked down to the appropriate paths.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When using the RADOS driver, the hierarchy of the files is stored
in OMAPs, but the root OMAP was not created and a call to List("/")
was returning an error instead of returned the first level files
stored. This patches creates an OMAP for "/" and excludes the listed
directory from the list of files returned.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
with a new `proxy` section in the configuration file.
Create a new registry type which delegates storage to a proxyBlobStore
and proxyManifestStore. These stores will pull through data if not present
locally. proxyBlobStore takes care not to write duplicate data to disk.
Add a scheduler to cleanup expired content. The scheduler runs as a background
goroutine. When a blob or manifest is pulled through from the remote registry,
an entry is added to the scheduler with a TTL. When the TTL expires the
scheduler calls a pre-specified function to remove the fetched resource.
Add token authentication to the registry middleware. Get a token at startup
and preload the credential store with the username and password supplied in the
config file.
Allow resumable digest functionality to be disabled at runtime and disable
it when the registry is a pull through cache.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
registry/storage/blob_test.go:149: arg d for printf verb %s of wrong type: github.com/docker/distribution.Descriptor
Signed-off-by: Doug Davis <dug@us.ibm.com>
Storage drivers can implement a method called URLFor which can return a direct
url for a given path. The functionality allows the registry to direct clients
to download content directly from the backend storage. This is commonly used
with s3 and cloudfront. Under certain conditions, such as when the registry is
not local to the backend, these redirects can hurt performance and waste
incoming bandwidth on pulls. This feature addition allows one to disable this
feature, if required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Conflicts:
configuration/configuration.go
registry/handlers/app.go
registry/storage/catalog_test.go
registry/storage/manifeststore_test.go
registry/storage/registry.go
Implement the delete API by implementing soft delete for layers
and blobs by removing link files and updating the blob descriptor
cache. Deletion is configurable - if it is disabled API calls
will return an unsupported error.
We invalidate the blob descriptor cache by changing the linkedBlobStore's
blobStatter to a blobDescriptorService and naming it blobAccessController.
Delete() is added throughout the relevant API to support this functionality.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This change removes the Catalog Service and replaces it with a more
simplistic Repositories() method for obtaining a catalog of all
repositories. The Repositories method takes a pre-allocated slice
and fills it up to the size of the slice and returns the amount
filled. The catalog is returned lexicographically and will start
being filled from the last entry passed to Repositories(). If there
are no more entries to fill, io.EOF will be returned.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Conflicts:
registry/client/repository.go
registry/handlers/api_test.go
This change adds a basic catalog endpoint to the API, which returns a list,
or partial list, of all of the repositories contained in the registry. Calls
to this endpoint are somewhat expensive, as every call requires walking a
large part of the registry.
Instead, to maintain a list of repositories, you would first call the catalog
endpoint to get an initial list, and then use the events API to maintain
any future repositories.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
After consideration, we've changed the main descriptor field name to for number
of bytes to "size" to match convention. While this may be a subjective
argument, commonly we refer to files by their "size" rather than their
"length". This will match other conventions, like `(FileInfo).Size()` and
methods on `io.SizeReaderAt`. Under more broad analysis, this argument doesn't
necessarily hold up. If anything, "size" is shorter than "length".
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Add a functional argument to pass a digest to (ManifestService).GetByTag().
If the digest matches an empty manifest and nil error are returned.
See 1bc740b0d5 for server implementation.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This removes documentation and code related to IPC based storage driver
plugins. The existence of this functionality was an original feature goal but
is now not maintained and actively confusing incoming contributions. We will
likely explore some driver plugin mechanism in the future but we don't need
this laying around in the meantime.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This ensures that rados is not required when building the registry. This was
slightly tricky in that when the flags were applied, the rados package was
completely missing. This led to a problem where rados was basically unlistable
and untestable as a package. This was fixed by simply adding a doc.go file that
is included whether rados is built or not.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change refreshes the updated version of Azure SDK
for Go that has the latest changes.
I manually vendored the new SDK (github.com/Azure/azure-sdk-for-go)
and I removed `management/` `core/` packages manually simply because
they're not used here and they have a fork of `net/http` and `crypto/tls`
for a particular reason. It was introducing a 44k SLOC change otherwise...
This also undoes the `include_azure` flag (actually Steven removed the
driver from imports but forgot to add the build flag apparently, so the
flag wasn't really including azure. 😄 ). This also must be obsolete
now.
Fixes#620, #175.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
To make the definition of supported digests more clear, we have refactored the
digest package to have a special Algorithm type. This represents the digest's
prefix and we associated various supported hash implementations through
function calls.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The change relies on a refactor of the upstream resumable sha256/sha512 package
that opts to register implementations with the standard library. This allows
the resumable support to be detected where it matters, avoiding unnecessary and
complex code. It also ensures that consumers of the digest package don't need
to depend on the forked sha implementations.
We also get an optimization with this change. If the size of data written to a
digester is the same as the file size, we check to see if the digest has been
verified. This works if the blob is written and committed in a single request.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Ensure that clients can use the blob descriptor cache provider without needing
the redis package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This driver implements the storagedriver.StorageDriver interface and
uses Ceph Object Storage as storage backend.
Since RADOS is an object storage and no hierarchy notion, the
following convention is used to keep the filesystem notions stored in
this backend:
* All the objects data are stored with opaque UUID names prefixed
(e.g. "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164).
* All the hierarchy information are stored in rados omaps, where the
omap object identifier is the virtual directory name, the keys in
a specific are the relative filenames and the values the blob
object identifier (or empty value for a sub directory).
e.g. For the following hierarchy:
/directory1
/directory1/object1
/directory1/object2
/directory1/directory2/object3
The omap "/directory1" will contains the following key / values:
- "object1" "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164"
- "object2" "blob:db2e359d-4af0-4bfb-ba1d-d2fd029866a0"
- "directory2" ""
The omap "/directory1/directory2" will contains:
- "object3" "blob:9ae2371c-81fc-4945-80ac-8bf7f566a5d9"
* The MOVE is implemented by changing the reference to a specific
blob in its parent virtual directory omap.
This driver stripes rados objects to a fixed size (e.g. 4M). The idea
is to keep small objects (as done by RBD on the top of RADOS) that
will be easily synchronized accross OSDs. The information of the
original object (i.e total size of the chunks) is stored as a Xattr
in the first chunk object.
Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
This PR refactors the blob service API to be oriented around blob descriptors.
Identified by digests, blobs become an abstract entity that can be read and
written using a descriptor as a handle. This allows blobs to take many forms,
such as a ReadSeekCloser or a simple byte buffer, allowing blob oriented
operations to better integrate with blob agnostic APIs (such as the `io`
package). The error definitions are now better organized to reflect conditions
that can only be seen when interacting with the blob API.
The main benefit of this is to separate the much smaller metadata from large
file storage. Many benefits also follow from this. Reading and writing has
been separated into discrete services. Backend implementation is also
simplified, by reducing the amount of metadata that needs to be picked up to
simply serve a read. This also improves cacheability.
"Opening" a blob simply consists of an access check (Stat) and a path
calculation. Caching is greatly simplified and we've made the mapping of
provisional to canonical hashes a first-class concept. BlobDescriptorService
and BlobProvider can be combined in different ways to achieve varying effects.
Recommend Review Approach
-------------------------
This is a very large patch. While apologies are in order, we are getting a
considerable amount of refactoring. Most changes follow from the changes to
the root package (distribution), so start there. From there, the main changes
are in storage. Looking at (*repository).Blobs will help to understand the how
the linkedBlobStore is wired. One can explore the internals within and also
branch out into understanding the changes to the caching layer. Following the
descriptions below will also help to guide you.
To reduce the chances for regressions, it was critical that major changes to
unit tests were avoided. Where possible, they are left untouched and where
not, the spirit is hopefully captured. Pay particular attention to where
behavior may have changed.
Storage
-------
The primary changes to the `storage` package, other than the interface
updates, were to merge the layerstore and blobstore. Blob access is now
layered even further. The first layer, blobStore, exposes a global
`BlobStatter` and `BlobProvider`. Operations here provide a fast path for most
read operations that don't take access control into account. The
`linkedBlobStore` layers on top of the `blobStore`, providing repository-
scoped blob link management in the backend. The `linkedBlobStore` implements
the full `BlobStore` suite, providing access-controlled, repository-local blob
writers. The abstraction between the two is slightly broken in that
`linkedBlobStore` is the only channel under which one can write into the global
blob store. The `linkedBlobStore` also provides flexibility in that it can act
over different link sets depending on configuration. This allows us to use the
same code for signature links, manifest links and blob links. Eventually, we
will fully consolidate this storage.
The improved cache flow comes from the `linkedBlobStatter` component
of `linkedBlobStore`. Using a `cachedBlobStatter`, these combine together to
provide a simple cache hierarchy that should streamline access checks on read
and write operations, or at least provide a single path to optimize. The
metrics have been changed in a slightly incompatible way since the former
operations, Fetch and Exists, are no longer relevant.
The fileWriter and fileReader have been slightly modified to support the rest
of the changes. The most interesting is the removal of the `Stat` call from
`newFileReader`. This was the source of unnecessary round trips that were only
present to look up the size of the resulting reader. Now, one must simply pass
in the size, requiring the caller to decide whether or not the `Stat` call is
appropriate. In several cases, it turned out the caller already had the size
already. The `WriterAt` implementation has been removed from `fileWriter`,
since it is no longer required for `BlobWriter`, reducing the number of paths
which writes may take.
Cache
-----
Unfortunately, the `cache` package required a near full rewrite. It was pretty
mechanical in that the cache is oriented around the `BlobDescriptorService`
slightly modified to include the ability to set the values for individual
digests. While the implementation is oriented towards caching, it can act as a
primary store. Provisions are in place to have repository local metadata, in
addition to global metadata. Fallback is implemented as a part of the storage
package to maintain this flexibility.
One unfortunate side-effect is that caching is now repository-scoped, rather
than global. This should have little effect on performance but may increase
memory usage.
Handlers
--------
The `handlers` package has been updated to leverage the new API. For the most
part, the changes are superficial or mechanical based on the API changes. This
did expose a bug in the handling of provisional vs canonical digests that was
fixed in the unit tests.
Configuration
-------------
One user-facing change has been made to the configuration and is updated in
the associated documentation. The `layerinfo` cache parameter has been
deprecated by the `blobdescriptor` cache parameter. Both are equivalent and
configuration files should be backward compatible.
Notifications
-------------
Changes the `notification` package are simply to support the interface
changes.
Context
-------
A small change has been made to the tracing log-level. Traces have been moved
from "info" to "debug" level to reduce output when not needed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
- Set an Etag header
- Check If-None-Match and respond appropriately
- Set a Cache-Control header with a default of 1 week
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This deals with a memory leak, caused by goroutines, experienced when using the
s3 driver. Unfortunately, this section of the code leaks goroutines like a
sieve. There is probably some refactoring that could be done to avoid this but
instead, we have a done channel that will cause waiting goroutines to exit.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
- Change driver interface to take a context as its first argument
- Make newFileReader take a context as its first argument
- Make newFileWriter take a context as its first argument
- Make blobstore exists and delete take a context as a first argument
- Pass the layerreader's context to the storage layer
- Pass the app's context to purgeuploads
- Store the app's context into the blobstore (was previously null)
- Pass the trace'd context to the storage drivers
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
The code using values from the yaml package wasn't careful enought with the
possible incoming types. Turns out, it is just an int but we've made this
section somewhat bulletproof in case that package changes the behavior.
This code likely never worked. The configuration system should be decoupled
from the object instantiation.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
