Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
In 326c3a9c49, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This fixes both the s3 driver and the oss driver to return the unmunged path
when returning errors.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swift returns an empty object list when trying to read a non-existing object path, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: David li <wenquan.li@hpe.com>
RADOS returns a -EIO when trying to read a non-existing OMAP, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Issue #1186 describes a condition where a null tags response is returned when
using the s3 driver. The issue seems to be related to a missing
PathNotFoundError in s3. This change adds a test for that to get an idea of the
lack of compliance across storage drivers. If the failures are manageable,
we'll add this test condition and fix the s3 driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The Delete method lists objects under the given path and tries to delete
all of them with a bulk delete request. If the path has no objects
underneath it, the body of this request will be empty, which causes
HTTP-level issues. Specifically, Go's HTTP client senses the empty
request buffer and doesn't include a Content-Length, which causes the
Swift server to fail the request.
This commit fixes the problem by avoiding sending empty bulk delete
requests. This is the correct thing to do anyway, since there's no
reason to request deletion of zero objects.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Errors thrown by storage drivers don't have the name of the driver, causing user
confusion about whether the error is coming from Docker or from a storage driver.
This change adds the storage driver name to each error message.
This required changing ErrUnsupportedDriver to a type, leading to code changes
whenever ErrUnsupportedDriver is used. The tests check whether the driver name
appears in the error message.
Signed-off-by: Amit Shukla <amit.shukla@docker.com>
In the S3 storage driver there is currently an initial access permission check by listing the bucket. If this check fails, registry will panic and exit.
However, this check is broken in two ways. First of all it strips the final slash from the root directory path, meaning that any access permissions which limit access to a single directory will fail, because S3 treats the path as strict prefix match. Secondly it fails to strip any leading slash that might be present, unlike the other access places, which means that the path used is different as a leading slash is allowed and significant in a filename in S3.
Since there is also a periodic health check which correctly checks access permissions and shows the error more cleanly, the best solution seems to be to just remove this initial access check.
Signed-off-by: Nuutti Kotivuori <nuutti.kotivuori@poplatek.fi>
When using the RADOS driver, the hierarchy of the files is stored
in OMAPs, but the root OMAP was not created and a call to List("/")
was returning an error instead of returned the first level files
stored. This patches creates an OMAP for "/" and excludes the listed
directory from the list of files returned.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
This removes documentation and code related to IPC based storage driver
plugins. The existence of this functionality was an original feature goal but
is now not maintained and actively confusing incoming contributions. We will
likely explore some driver plugin mechanism in the future but we don't need
this laying around in the meantime.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This ensures that rados is not required when building the registry. This was
slightly tricky in that when the flags were applied, the rados package was
completely missing. This led to a problem where rados was basically unlistable
and untestable as a package. This was fixed by simply adding a doc.go file that
is included whether rados is built or not.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change refreshes the updated version of Azure SDK
for Go that has the latest changes.
I manually vendored the new SDK (github.com/Azure/azure-sdk-for-go)
and I removed `management/` `core/` packages manually simply because
they're not used here and they have a fork of `net/http` and `crypto/tls`
for a particular reason. It was introducing a 44k SLOC change otherwise...
This also undoes the `include_azure` flag (actually Steven removed the
driver from imports but forgot to add the build flag apparently, so the
flag wasn't really including azure. 😄 ). This also must be obsolete
now.
Fixes#620, #175.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
This driver implements the storagedriver.StorageDriver interface and
uses Ceph Object Storage as storage backend.
Since RADOS is an object storage and no hierarchy notion, the
following convention is used to keep the filesystem notions stored in
this backend:
* All the objects data are stored with opaque UUID names prefixed
(e.g. "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164).
* All the hierarchy information are stored in rados omaps, where the
omap object identifier is the virtual directory name, the keys in
a specific are the relative filenames and the values the blob
object identifier (or empty value for a sub directory).
e.g. For the following hierarchy:
/directory1
/directory1/object1
/directory1/object2
/directory1/directory2/object3
The omap "/directory1" will contains the following key / values:
- "object1" "blob:d3d232ff-ab3a-4046-9ab7-930228d4c164"
- "object2" "blob:db2e359d-4af0-4bfb-ba1d-d2fd029866a0"
- "directory2" ""
The omap "/directory1/directory2" will contains:
- "object3" "blob:9ae2371c-81fc-4945-80ac-8bf7f566a5d9"
* The MOVE is implemented by changing the reference to a specific
blob in its parent virtual directory omap.
This driver stripes rados objects to a fixed size (e.g. 4M). The idea
is to keep small objects (as done by RBD on the top of RADOS) that
will be easily synchronized accross OSDs. The information of the
original object (i.e total size of the chunks) is stored as a Xattr
in the first chunk object.
Signed-off-by: Vincent Giersch <vincent.giersch@ovh.net>
This deals with a memory leak, caused by goroutines, experienced when using the
s3 driver. Unfortunately, this section of the code leaks goroutines like a
sieve. There is probably some refactoring that could be done to avoid this but
instead, we have a done channel that will cause waiting goroutines to exit.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
- Change driver interface to take a context as its first argument
- Make newFileReader take a context as its first argument
- Make newFileWriter take a context as its first argument
- Make blobstore exists and delete take a context as a first argument
- Pass the layerreader's context to the storage layer
- Pass the app's context to purgeuploads
- Store the app's context into the blobstore (was previously null)
- Pass the trace'd context to the storage drivers
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
