go1.5 doesn't export http.StatusTooManyRequests while
go1.6 does. Fix this by hardcoding the status code for now.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This commit refactors base.regulator into the 2.4 interfaces and adds a
filesystem configuration option `maxthreads` to configure the regulator.
By default `maxthreads` is set to 100. This means the FS driver is
limited to 100 concurrent blocking file operations. Any subsequent
operations will block in Go until previous filesystem operations
complete.
This ensures that the registry can never open thousands of simultaneous
threads from os filesystem operations.
Note that `maxthreads` can never be less than 25.
Add test case covering parsable string maxthreads
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
subsequent close.
When a blob upload is cancelled close the blobwriter before removing
upload state to ensure old hashstates don't persist.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
It's easily possible for a flood of requests to trigger thousands of
concurrent file accesses on the storage driver. Each file I/O call creates
a new OS thread that is not reaped by the Golang runtime. By limiting it
to only 100 at a time we can effectively bound the number of OS threads
in use by the storage driver.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
Use sockets.DialerFromEnvironment, as is done in other places,
to transparently support SOCKS proxy config from ALL_PROXY
environment variable.
Requires the *engine* have the ALL_PROXY env var set, which
doesn't seem ideal. Maybe it should be a CLI option somehow?
Only tested with push and a v2 registry so far. I'm happy to look
further into testing more broadly, but I wanted to get feedback on
the general idea first.
Signed-off-by: Brett Higgins <brhiggins@arbor.net>
This fix tries to address the issue in #22244 where the remote
API `/auth` will not set the default value of `serveraddress`
if not provided. This behavior happens after only in 1.11.0
and is a regression as in 1.10.3 `serveraddress` will be assigned
with `IndexServer` if no value is provided.
The default value `IndexServer` is assigned to `serveraddress` if
no value provided in this fix.
An integration test `TestAuthApi` has been added to cover this change
This fix fixes#22244.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
If a schema 1 manifest is uploaded with the `disablesignaturestore` option set
to true, then no signatures will exist. Handle this case.
If a schema 1 manifest is pushed, deleted, garbage collected and pushed again, the
repository will contain signature links from the first version, but the blobs will
not exist. Disable the signature store in the garbage-collect command so
signatures are not fetched.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
In 000dec3c6f, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
If this slice ends up empty after parsing the HTTP response body, it
means the body is not well-formed. We've probably encountered an error
message produced by something that uses a different JSON schema, or
an error that just happens to validate as JSON.
An empty errcode.Errors slice is not a very useful thing to return,
since its Error() output is just `<nil>`. Detect this case, and instend
return an UnexpectedHTTPResponseError.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Going forward, Docker won't use a different default registry on Windows.
This changes Windows to use the standard Docker Hub registry as the
default registry.
There is a plan in place to migrate existing images from the Windows
registry to Hub's normal registry, in advance of the 1.11 release. In
the mean time, images on the Windows registry can be accessed by
prefixing them with `registry-win-tp3.docker.io/`.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
It is possible for a middlebox to lowercase the URL at somepoint causing a
lookup in the auth challenges table to fail. Lowercase hostname before
using as keys to challenge map.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Cross repository push tokens were not being cached and could not be used,
now any returned token will be used and the caching is hidden in the getToken function.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Login needs to add an offline token flag to ensure a refresh token is returned by the token endpoint.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
Ensure Accept headers are sent with TagService.Get (which hits manifest
endpoints). Add support for remote Get and Put for the proxied blobstore.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Middleware code may perform additional checks on blobs written. Allow it
to return access denied errors that will result in 403 Forbidden.
Signed-off-by: Michal Minar <miminar@redhat.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
challenges with the upstream until any proxied data is found not to be local.
Implement auth challenges behind an interface and add to unit tests. Also,
remove a non-sensical unit test.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Making this an exported error value will allow users of the
registry/client/auth module to have consistent behavior between
authentication failures and cases where no credentials are provided.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
When schema2 manifests are rewritten as schema1 currently the etag and docker content digest header keep the value for the schema2 manifest.
Fixes#1444
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
A changeset under consideration for Go 1.7 would automatically copy
headers on redirect. This change future-proofs our code so we won't make
duplicate copies of the headers if net/http does it automatically in the
future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Prevent using strings throughout the code to reference a string key defined in the auth package.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Since RawMessage json receivers take a pointer type, the Header structure should use points in order to call the json.RawMessage marshal and unmarshal functions
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This is needed for compatibility with some third-party registries that
send an inappropriate Content-Type header such as text/html.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
https://github.com/docker/distribution/pull/1249 changed token fetching
to parse HTTP error response bodies as serialized errcodes. However,
Docker Hub's authentication endpoint does not return error bodies in
this format. To work around this, convert its format into
ErrCodeUnauthorized or ErrCodeUnknown.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The daemon uses two similar filename extensions to identify different
kinds of certificates. ".crt" files are interpreted as CA certificates,
and ".cert" files are interprted as client certificates. If a CA
certificate is accidentally given the extension ".cert", it will lead to
the following error message:
Missing key ca.key for certificate ca.cert
To make this slightly less confusing, clarify the error message with a
note that CA certificates should use the extension ".crt".
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
The Payload function for schema1 currently returns a signed manifest,
but indicates the content type is that of a manifest that isn't signed.
Note that this breaks compatibility with Registry 2.3 alpha 1 and
Docker 1.10-rc1, because they use the incorrect content type.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
For compatibility with other registries that don't use this exact
variant of the Content-Type header, we need to be more flexible about
what we accept. Any form of "application/json" should be allowed. The
charset should not be included in the comparison.
See docker/docker#19400.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Accidentally checked for err != nil instead of err == nil :/
Also now ensures that only a non-nil option is appended to the create
options slice
Signed-off-by: Brian Bland <brian.bland@docker.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
When an auth request provides the "from" query parameter, the token
handler will add a "pull" scope for the provided repository, refreshing
the token if the overall scope has increased
Signed-off-by: Brian Bland <brian.bland@docker.com>
This makes content type sniffing cleaner. The document just needs to be
decoded into a manifest.Versioned structure. It's no longer a two-step
process.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
