Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
Ensure Accept headers are sent with TagService.Get (which hits manifest
endpoints). Add support for remote Get and Put for the proxied blobstore.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Middleware code may perform additional checks on blobs written. Allow it
to return access denied errors that will result in 403 Forbidden.
Signed-off-by: Michal Minar <miminar@redhat.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
challenges with the upstream until any proxied data is found not to be local.
Implement auth challenges behind an interface and add to unit tests. Also,
remove a non-sensical unit test.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Making this an exported error value will allow users of the
registry/client/auth module to have consistent behavior between
authentication failures and cases where no credentials are provided.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
When schema2 manifests are rewritten as schema1 currently the etag and docker content digest header keep the value for the schema2 manifest.
Fixes#1444
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
A changeset under consideration for Go 1.7 would automatically copy
headers on redirect. This change future-proofs our code so we won't make
duplicate copies of the headers if net/http does it automatically in the
future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Prevent using strings throughout the code to reference a string key defined in the auth package.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Since RawMessage json receivers take a pointer type, the Header structure should use points in order to call the json.RawMessage marshal and unmarshal functions
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- Fixing index metadata error
- Entering all the comments
- Updating with the build fixes
- Fix Microsoft link broken
- Fix collocate, colocate, to unambiguous co-locate
Signed-off-by: Mary Anthony <mary@docker.com>
This is needed for compatibility with some third-party registries that
send an inappropriate Content-Type header such as text/html.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
https://github.com/docker/distribution/pull/1249 changed token fetching
to parse HTTP error response bodies as serialized errcodes. However,
Docker Hub's authentication endpoint does not return error bodies in
this format. To work around this, convert its format into
ErrCodeUnauthorized or ErrCodeUnknown.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The daemon uses two similar filename extensions to identify different
kinds of certificates. ".crt" files are interpreted as CA certificates,
and ".cert" files are interprted as client certificates. If a CA
certificate is accidentally given the extension ".cert", it will lead to
the following error message:
Missing key ca.key for certificate ca.cert
To make this slightly less confusing, clarify the error message with a
note that CA certificates should use the extension ".crt".
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
The Payload function for schema1 currently returns a signed manifest,
but indicates the content type is that of a manifest that isn't signed.
Note that this breaks compatibility with Registry 2.3 alpha 1 and
Docker 1.10-rc1, because they use the incorrect content type.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
For compatibility with other registries that don't use this exact
variant of the Content-Type header, we need to be more flexible about
what we accept. Any form of "application/json" should be allowed. The
charset should not be included in the comparison.
See docker/docker#19400.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Accidentally checked for err != nil instead of err == nil :/
Also now ensures that only a non-nil option is appended to the create
options slice
Signed-off-by: Brian Bland <brian.bland@docker.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
When an auth request provides the "from" query parameter, the token
handler will add a "pull" scope for the provided repository, refreshing
the token if the overall scope has increased
Signed-off-by: Brian Bland <brian.bland@docker.com>
This makes content type sniffing cleaner. The document just needs to be
decoded into a manifest.Versioned structure. It's no longer a two-step
process.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Create signedManifestHandler and schema2ManifestHandler. Use these to
unmarshal and put the respective types of manifests from manifestStore.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a manifest is deleted by digest, look up the referenced tags in the tag
store and remove all associations.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Markdown linter produced an error on this page;
running markdownlint
ERROR (registry/spec/manifest-v2-2.md) frontmatter: Unexpected non-whitespace char: # Image Manifest Version 2, Schema 2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Use the ones provided by docker/go-connections, they are a drop in replacement.
- Remove pkg/sockets from docker.
- Keep pkg/tlsconfig because libnetwork still needs it and there is a
circular dependency issue.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a followup to #18839. That PR relaxed the fallback logic so that
if a manifest doesn't exist on v2, or the user is unauthorized to access
it, we try again with the v1 protocol. A similar special case is needed
for "pull all tags" (docker pull -a). If the v2 registry doesn't
recognize the repository, or doesn't allow the user to access it, we
should fall back to v1 and try to pull all tags from the v1 registry.
Conversely, if the v2 registry does allow us to list the tags, there
should be no fallback, even if there are errors pulling those tags.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
PR #18590 caused compatibility issues with registries such as gcr.io
which support both the v1 and v2 protocols, but do not provide the same
set of images over both protocols. After #18590, pulls from these
registries would never use the v1 protocol, because of the
Docker-Distribution-Api-Version header indicating that v2 was supported.
Fix the problem by making an exception for the case where a manifest is
not found. This should allow fallback to v1 in case that image is
exposed over the v1 protocol but not the v2 protocol.
This avoids the overly aggressive fallback behavior before #18590 which
would allow protocol fallback after almost any error, but restores
interoperability with mixed v1/v2 registry setups.
Fixes#18832
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Since the CloudFront middleware does not work without an S3 backend, it
became obvious that this documentation should exist within the S3
storage-driver documentation.
Signed-off-by: DJ Enriquez <dj.enriquez@infospace.com>
This is a follow-on to PR #62, and it borrows much of the format
from #993, but uses specific formats for the image manifest and manifest
list (fat manifest) instead of a combined generic format.
The intent of this proposed manifest format is to allow multi-arch, and
allow for full content-addressability of images in the Docker engine.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Adding a more detailed document regarding how to use CloudFront as
middleware for an s3 backed registry.
Signed-off-by: DJ Enriquez <dj.enriquez@infospace.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The current implementation of digest.FromBytes returns an error. This
error can never be non-nil, but its presence in the function signature
means each call site needs error handling code for an error that is
always nil.
I verified that none of the hash.Hash implementations in the standard
library can return an error on Write. Nor can any of the hash.Hash
implementations vendored in distribution.
This commit changes digest.FromBytes not to return an error. If Write
returns an error, it will panic, but as discussed above, this should
never happen.
This commit also avoids using a bytes.Reader to feed data into the hash
function in FromBytes. This makes the hypothetical case that would panic
a bit more explicit, and should also be more performant.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
registry.ResolveAuthConfig() only needs the AuthConfigs from the ConfigFile, so
this change passed just the AuthConfigs.
Signed-off-by: Daniel Nephin <dnephin@gmail.com>
This calls Stat before Open, which should be unnecessary because Open
can handle the case of a nonexistent blob. Removing the Stat saves a
round trip.
This is similar to the removal of stat in Open in #1226.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes both the s3 driver and the oss driver to return the unmunged path
when returning errors.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swift returns an empty object list when trying to read a non-existing object path, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: David li <wenquan.li@hpe.com>
RADOS returns a -EIO when trying to read a non-existing OMAP, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Issue #1186 describes a condition where a null tags response is returned when
using the s3 driver. The issue seems to be related to a missing
PathNotFoundError in s3. This change adds a test for that to get an idea of the
lack of compliance across storage drivers. If the failures are manageable,
we'll add this test condition and fix the s3 driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
ContinueOnError assumes that something of type errcode.Errors contains
at least one error. This is generally true, but might not be true if the
remote registry returns an empty error body or invalid JSON. Add the
bounds check, and in the case where it fails, allow fallbacks to v1.
Fixes#18481
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Fixes a huge problem where a nginx variable was not escaped and nginx was adding the literal string "always" to all requests.
The most obvious result was that basic auth was entirely broken.
Signed-off-by: Carson Anderson <ca@carson-anderson.com>
This change removes the sort() from the Repositories() function since
we're now guaranteed to have a lexigraphically sorted walk.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
If this example was copied and pasted, the shell would try to interpolate `$upstream_http_docker_distribution_api_version` and `$docker_distribution_api_version`.
Signed-off-by: Andrew Meredith <andymeredith@gmail.com>
This change clarifies the way the catalog endpoint returns results
when pagination was not explicitly requested.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Without this commit, three round-trips are required to fetch a blob with
a progress bar. The first is a call to Stat (HEAD request), to determine
the size. Then Open is called, which also calls Stat, and finally
performs a GET request.
Only the GET request is actually needed. The size of the blob can be
sniffed from Content-Length in the GET response.
This commit changes HTTPReadSeeker to automatically detect the size from
Content-Length instead of requiring it to be passed in. The Stat call is
removed from Open because it is no longer necessary.
HTTPReadSeeker now takes an additional errorHandler callback argument which
translates an unsuccessful HTTP response into an appropriate API-level
error. Using a callback for this makes it possible to avoid leaking the
repsonse body to Read's caller, which would make lifecycle management
problematic.
Fixes#1223
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix avoids overwritting the previous error messages, ensures the client gets the correct error messages and not just the most recent message during the pull request.
For this `var lastErr` replaced with a slice which acts as a temp place holder for the list of returned error messages for every attempt.
The slice is later joined and returned to the caller function after searching for the image with diffirent versions(v2,v1,v0).
Updated the code with check for no space left on device error occurance and prevent the
daemon on falling back to v1,v0.
Incorporated the comments from @calavera, @RichardScothern, @cpuguy83
Signed-off-by: Anil Belur <askb23@gmail.com>
The Delete method lists objects under the given path and tries to delete
all of them with a bulk delete request. If the path has no objects
underneath it, the body of this request will be empty, which causes
HTTP-level issues. Specifically, Go's HTTP client senses the empty
request buffer and doesn't include a Content-Length, which causes the
Swift server to fail the request.
This commit fixes the problem by avoiding sending empty bulk delete
requests. This is the correct thing to do anyway, since there's no
reason to request deletion of zero objects.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Previously, this error message would stringify as a pointer address,
which isn't particularly helpful.
This change breaks out the elements of the challenge object such that
the error is appropriately represented.
Signed-off-by: Ted Reed <ted.reed@gmail.com>
contains equal length History and FSLayer arrays.
This is required to prevent malformed manifests being put to the registry and
failing external verification checks.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Errors thrown by storage drivers don't have the name of the driver, causing user
confusion about whether the error is coming from Docker or from a storage driver.
This change adds the storage driver name to each error message.
This required changing ErrUnsupportedDriver to a type, leading to code changes
whenever ErrUnsupportedDriver is used. The tests check whether the driver name
appears in the error message.
Signed-off-by: Amit Shukla <amit.shukla@docker.com>
This updates the vendored docker/distribution to the current master
branch.
Note the following changes:
- The manifest package was split into manifest/schema1. Most references
to the manifest package in the engine needed to be updated to use
schema1 instead.
- Validation functions in api/v2 were replaced by the
distribution/reference package. The engine code has been updated to
use the reference package for validation where necessary. A future PR
will change the engine to use the types defined in
distribution/reference more comprehensively.
- The reference package explicitly allows double _ characters in
repository names. registry_test.go was updated for this.
- TestPullFailsWithAlteredManifest was corrupting the manifest JSON, now
that the schema1 package unmarshals the correct payload. The test is
being changed to modify the JSON without affecting its length, which
allows the pull to succeed to the point where digest validation
happens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This reverts commit c2d5c29437.
Commit caused issues on systems with case-insensitive filesystems.
Revert for now
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Move autogen/dockerversion to version
- Update autogen and "builds" to use this package and a build flag
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This extends the specification for the Bearer token response to include
information pertaining to when an issued Bearer token will expire.
This also allows the client to accept `access_token` as an alias for `token`.
Signed-off-by: Matt Moore <mattmoor@google.com>
This extends the specification for the Bearer token response to include
information pertaining to when an issued Bearer token will expire.
This also allows the client to accept `access_token` as an alias for `token`.
Signed-off-by: Matt Moore <mattmoor@google.com>
The docs don't render emoji, so replaced the `⚠️` with
a `**Warning**:` to keep the formatting consisten with
`**Note**:` used in other parts of the docs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The proxy scheduler implemented its own timer state machine. It's
simpler and more efficient to leverage the Go runtime's timer heap by
using time.AfterFunc.
This commit adds a time.Timer to each scheduler entry, and starts and
stops those timers as necessary. Then the mainloop goroutine and its
associated logic are not needed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds a variable to help nginx add the
Docker-Distribution-Api-Version when using basic auth, and not add the
header when it sees it from the upstream.
Also fix some minor spelling/grammar issues.
Signed-off-by: Sharif Nassar <sharif@mrwacky.com>
To ensure that we only unmarshal the verified payload into the contained
manifest, we first copy the entire incoming buffer into Raw and then unmarshal
only the Payload portion of the incoming bytes. If the contents is later
verified, the caller can then be sure that the contents of the Manifest fields
can be trusted.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There seems to be a need for a type that represents a way of pointing
to an image, irrespective of the implementation.
This patch defines a Reference interface and provides 3 implementations:
- TagReference: when only a tag is provided
- DigestReference: when a digest (according to the digest package) is
provided, can include optional tag as well
Validation of references are purely syntactic.
There is also a strong type for tags, analogous to digests, as well
as a strong type for Repository from which clients can access the
hostname alone, or the repository name without the hostname, or both
together via the String() method.
For Repository, the files names.go and names_test.go were moved from
the v2 package.
Signed-off-by: Tibor Vass <tibor@docker.com>
Pick up name regexp change in distribution to allow matching of hostnames as a valid component of a repository.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
of readers joining current downloads. Concurrent requests for the same blob
will not block, but only the first instance will be comitted locally.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Fixes https://github.com/docker/distribution/issues/1062
This relaxes the naming restrictions places on Docker images to permit
valid hostnames according to [RFC-2396](https://www.ietf.org/rfc/rfc2396.txt).
It deviates from the RFC in the following ways:
1) Allow underscores where we allow hyphens (hostnames don't allow
underscores, which we must for backwards compatibility).
2) Leave "top-level" name segments unrestricted (domains require an
alpha character to begin a top-level domain, e.g. "com").
3) DO NOT allow a trailing dot, as permitted by FQDNs.
Signed-off-by: Matt Moore <mattmoor@google.com>
It seems that enabling proxy stops my instance from accepting local pushes, but I can't find mention of that in the docs.
Signed-off-by: Jason Freidman <jason@periscope.io>
Search terms shouldn't be restricted to only full valid repository
names. It should be perfectly valid to search using a part of a name,
even if it ends with a period, dash or underscore.
Signed-off-by: Hu Keping <hukeping@huawei.com>
This allows the administrator to specify an externally-reachable URL for
the registry. It takes precedence over the X-Forwarded-Proto and
X-Forwarded-Host headers, and the hostname in the request.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This allows the administrator to specify an externally-reachable URL for
the registry. It takes precedence over the X-Forwarded-Proto and
X-Forwarded-Host headers, and the hostname in the request.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Associate HTTP 401s with Authentication errors rather than Authorization
errors. Changes the meaning of the UNAUTHORIZED error to be authentication
specific.
Defines DENIED error code to be associated with authorization
errors which result in HTTP 403 responses.
Add 'No Such Repository' errors to more endpoints.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Associate HTTP 401s with Authentication errors rather than Authorization
errors. Changes the meaning of the UNAUTHORIZED error to be authentication
specific.
Defines DENIED error code to be associated with authorization
errors which result in HTTP 403 responses.
Add 'No Such Repository' errors to more endpoints.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This PR add some description to manifest spec.
It clarifies the relationship between `fsLayers` and `history` fields.
Signed-off-by: xiekeyang <xiekeyang@huawei.com>
The "testing" package adds some flags in its init function, so utilities
that import distribution code may print a page of extra testing flags in
their help output.
This commit solves the issue by moving an import of "testing" in the
registry/storage/cache package to a new
registry/storage/cache/cachecheck package, which is only imported by
tests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Add "readonly" under the storage/maintenance section. When this is set
to true, uploads and deletions will return 503 Service Unavailable
errors.
Document the parameter and add some unit testing.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add "readonly" under the storage/maintenance section. When this is set
to true, uploads and deletions will return 503 Service Unavailable
errors.
Document the parameter and add some unit testing.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
In the S3 storage driver there is currently an initial access permission check by listing the bucket. If this check fails, registry will panic and exit.
However, this check is broken in two ways. First of all it strips the final slash from the root directory path, meaning that any access permissions which limit access to a single directory will fail, because S3 treats the path as strict prefix match. Secondly it fails to strip any leading slash that might be present, unlike the other access places, which means that the path used is different as a leading slash is allowed and significant in a filename in S3.
Since there is also a periodic health check which correctly checks access permissions and shows the error more cleanly, the best solution seems to be to just remove this initial access check.
Signed-off-by: Nuutti Kotivuori <nuutti.kotivuori@poplatek.fi>
Split the discussion of v2 authentication into two parts:
1) A specification of the handshake between the client, registry and
authentication service.
2) A description of how `docker/distribution` implements this using JWT.
This should make it clearer that `#2` is an implementation detail, and
that clients should regard tokens as opaque entities that only the
registry and authentication service should understand.
Signed-off-by: Matt Moore <mattmoor@google.com>
By adding WithVersion to the context package, we can simplify context setup in
the application. This avoids some odd bugs where instantiation order can lead
to missing instance.id or version from log messages.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This solves a issue from #909 where instance.id was not printed in logs,
because this file was using the background context from
golang.org/x/net/context instead of
github.com/docker/distribution/context.
It's cleaner to standardize on one package, so this commit removes the
import of golang.org/x/net/context entirely. The Context interfaces
defined in both packages are the same, so other code using
golang.org/x/net/context can still pass its context to NewRegistry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Use this command in cmd/registry/main.go.
Move debug server to the main command, and change Serve to be a
ListenAndServe function.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Overriding configuration parameters with environment variables used to
work by walking the configuration structure and checking for a
corresponding environment variable for each item. This was very limiting
because only variables corresponding to items that already existed in
the configuration structure would be checked. For example, an
environment variable corresponding to nested maps would only be noticed
if the outer map's key already existed.
This commit changes environment variable overriding to iterate over the
environment instead. For environment variables beginning with the
REGISTRY_ prefix, it splits the rest of their names on "_", and
interprets that as a path to the variable to unmarshal into. Map keys
are created as necessary. If we encounter an empty interface partway
through following the path, it becomes an implicit
map[string]interface{}.
With the new unit tests added here, parser.go now has 89.2% test
coverage.
TestParseWithExtraneousEnvStorageParams was removed, because the limit
of one storage driver is no longer enforced while parsing environment
variables. Now, Storage.Type will panic if multiple drivers are
specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Normalized mirror.md to match other recipes.
Slightly tweaked content, emphasizing the privacy concerns about using login/password on the backend.
Signed-off-by: Olivier Gambier <olivier@docker.com>
Making metadata:
- more consistent
- more specific (fixed copy pasting)
- refine coverage
Insecure information cleanup
Removing no longer used files:
- mkdocs is gone
- the registry diagram is not used, and is a bit silly :)
Minor fixes
Fixing links
Recipes:
- harmonized code sections style to the rest of the docs
- harmonized recipe "style"
- listing new recipes
Enhance deploying
Signed-off-by: Olivier Gambier <olivier@docker.com>
As we begin our march towards multi-arch, we must prepare for the reality of
multiple manifest schemas. This is the beginning of a set of changes to
facilitate this. We are both moving this package into its target position where
it may live peacefully next to other manfiest versions.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To bring ErrorCode into liine with Go conventions, ErrorCode.Error() now
returns the "nice" value of the error code. This ensures error message assembly
works similar to commonly used Go conventions when directly using ErrorCode as
an error.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Also, add timeout and status code parameters to the HTTP checker, and
remove the threshold parameter for the file checker.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Also, add timeout and status code parameters to the HTTP checker, and
remove the threshold parameter for the file checker.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Update docs.
Change health_test.go tests to create their own registries and register
the checks there. The tests now call CheckStatus directly instead of
polling the HTTP handler, which returns results from the default
registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add default storagedriver health check to example configuration files
with parameters matching the previous hardcoded configuration.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add default storagedriver health check to example configuration files
with parameters matching the previous hardcoded configuration.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add a section to the config file called "health". Within this section,
"filecheckers" and "httpcheckers" list checks to run. Each check
specifies a file or URI, a time interval for the check, and a threshold
specifying how many times the check must fail to reach an unhealthy
state.
Document the new options in docs/configuration.md.
Add unit testing for both types of checkers. Add an UnregisterAll
function in the health package to support the unit tests, and an
Unregister function for consistency with Register.
Fix a string conversion problem in the health package's HTTP checker.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add a section to the config file called "health". Within this section,
"filecheckers" and "httpcheckers" list checks to run. Each check
specifies a file or URI, a time interval for the check, and a threshold
specifying how many times the check must fail to reach an unhealthy
state.
Document the new options in docs/configuration.md.
Add unit testing for both types of checkers. Add an UnregisterAll
function in the health package to support the unit tests, and an
Unregister function for consistency with Register.
Fix a string conversion problem in the health package's HTTP checker.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Clean up calling convention for NewRegistryWithDriver to use functional
arguments.
This is a first step towards the refactor described in #215. I plan to
add additional options in the process of moving configurable items from
the App structure to the registry structure.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
A change in #763 to address review comments caused problems. Originally,
instrumentedResponseWriter implemented the CloseNotifier interface, and
would panic if it was wrapping something that did not implement that
interface. This was split into a separate instrumentedResponseWriterCN
type that implements CloseNotifier, so there's a fallback if
instrumentedResponseWriter ever needs to wrap something that does not
implement this interface.
instrumentedResponseWriter's Value method would end up upcasting either
type back to instrumentedResponseWriter, which does not implement the
interface. In effect, instrumentedResponseWriterCN was never visible to
the handler.
This fixes the problem by implementing a wrapper Value method for
instrumentedResponseWriterCN.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Change checkResponse to only expect the configured
X-Content-Type-Options header if it doesn't receive a 405 error, which
means the handler isn't registered for that method.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The use of the pathMapper is no longer needed the way we have organized the
code base. The extra level of indirection has proved unnecessary and confusing
so we've opted to clean it up. In the future, we may require more flexibility,
but now it is simply not required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The storage cache option layerinfo is deprecated,
so use blobdescriptor instead in example config files.
Signed-off-by: xg.song <xg.song@venusource.com>
Unfortunately, the 2.1 releease has written manfiest links into the wrong
directory. This doesn't affect new 2.1 deployments but fixing this to be 2.0
backwards compatible has broken 2.1.0 compatibility. To ensure we have
compatibility between 2.0, 2.1.0 and future releases, we now check one of
several locations to identify a manifest link.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Unfortunately, the refactor used the incorrect path for manifest links within a
repository. While this didn't stop the registry from working, it did break
compatibility with 2.0 deployments for manifest fetches.
Tests were added to ensure these are locked down to the appropriate paths.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The example configuration files add X-Content-Type-Options: nosniff.
Add coverage in existing registry/handlers unit tests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The example configuration files add X-Content-Type-Options: nosniff.
Add coverage in existing registry/handlers unit tests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
distribution errors. Fill in missing checks for mutations on a registry pull-through
cache. Add unit tests and update documentation.
Also, give v2.ErrorCodeUnsupported an HTTP status code, previously it was
defaulting to 500, now its 405 Method Not Allowed.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
distribution errors. Fill in missing checks for mutations on a registry pull-through
cache. Add unit tests and update documentation.
Also, give v2.ErrorCodeUnsupported an HTTP status code, previously it was
defaulting to 500, now its 405 Method Not Allowed.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Several error codes are generally useful but tied to the v2 specification
definitions. This change moves these error code definitions into the common
package for use by the health package, which is not tied to the v2 API.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Several error codes are generally useful but tied to the v2 specification
definitions. This change moves these error code definitions into the common
package for use by the health package, which is not tied to the v2 API.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To ensure the ensure the web application is properly operating, we've added a
periodic health check for the storage driver. If the health check fails three
times in a row, the registry will serve 503 response status for any request
until the condition is resolved. The condition is reported in the response body
and via the /debug/health endpoint.
To ensure that all drivers will properly operate with this health check, a
function has been added to the driver testsuite.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When using the RADOS driver, the hierarchy of the files is stored
in OMAPs, but the root OMAP was not created and a call to List("/")
was returning an error instead of returned the first level files
stored. This patches creates an OMAP for "/" and excludes the listed
directory from the list of files returned.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
We are headed in a different direction. The dist tool analog will not be a part
of this repository.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Instead, provide a variant of instrumentedResponseWriter that does not
implement CloseNotifier, and use that when necessary. In
copyFullPayload, log instead of panicing when we encounter something
that doesn't implement CloseNotifier.
This is more complicated than I'd like, but it's necessary because
instrumentedResponseWriter must not embed CloseNotifier unless there's
really a CloseNotifier to embed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This page was missing styling once exported to HTML. Adding a
<!--[metadata]> block similar to the ones the other *.md files have
appears to solve the problem.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch splits LookupEndpoints into LookupPullEndpoints and
LookupPushEndpoints so that mirrors added with --registry-mirror are
skipped in the list returned by LookupPushEndpoints.
Fixes https://github.com/docker/distribution/issues/823
Signed-off-by: Tibor Vass <tibor@docker.com>
This fixes several flaws in the link rewriter:
- broken links on the docs side
- multiple links on one line being mangled
- byzantine logic
Also generalize the logic of the Dockerfile so it is no longer specific to "registry" (env variable), which is a first step in making it possible to upstream all this into the base image and docs project.
Added a number of tests (test.md) to validate the link replacer behavior (against test.compare.md), and embedded the test so that the doc build will fail if the link replacer does not behave.
This is still sed, unfortunately.
Signed-off-by: Olivier Gambier <olivier@docker.com>
with a new `proxy` section in the configuration file.
Create a new registry type which delegates storage to a proxyBlobStore
and proxyManifestStore. These stores will pull through data if not present
locally. proxyBlobStore takes care not to write duplicate data to disk.
Add a scheduler to cleanup expired content. The scheduler runs as a background
goroutine. When a blob or manifest is pulled through from the remote registry,
an entry is added to the scheduler with a TTL. When the TTL expires the
scheduler calls a pre-specified function to remove the fetched resource.
Add token authentication to the registry middleware. Get a token at startup
and preload the credential store with the username and password supplied in the
config file.
Allow resumable digest functionality to be disabled at runtime and disable
it when the registry is a pull through cache.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
with a new `proxy` section in the configuration file.
Create a new registry type which delegates storage to a proxyBlobStore
and proxyManifestStore. These stores will pull through data if not present
locally. proxyBlobStore takes care not to write duplicate data to disk.
Add a scheduler to cleanup expired content. The scheduler runs as a background
goroutine. When a blob or manifest is pulled through from the remote registry,
an entry is added to the scheduler with a TTL. When the TTL expires the
scheduler calls a pre-specified function to remove the fetched resource.
Add token authentication to the registry middleware. Get a token at startup
and preload the credential store with the username and password supplied in the
config file.
Allow resumable digest functionality to be disabled at runtime and disable
it when the registry is a pull through cache.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
registry/storage/blob_test.go:149: arg d for printf verb %s of wrong type: github.com/docker/distribution.Descriptor
Signed-off-by: Doug Davis <dug@us.ibm.com>
The response code isn't actually sent to the client, because the
connection has already closed by this point. But it causes the status
code to appear as 499 in the logs instead of 0.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a client disconnects without completing a HTTP request, we were
attempting to process the partial request, which usually leads to a 400
error. These errors can pollute the logs and make it more difficult to
track down real bugs.
This change uses CloseNotifier to detect disconnects. In combination
with checking Content-Length, we can detect a disconnect before sending
the full payload, and avoid logging a 400 error.
This logic is only applied to PUT, POST, and PATCH endpoints, as these
are the places where disconnects during a request are most likely to
happen.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Some structures use int for sizes and UNIX timestamps. On some
platforms, int is 32 bits, so this can lead to the year 2038 issues and
overflows when dealing with large containers or layers.
Consistently use int64 to store sizes and UNIX timestamps in
api/types/types.go. Update related to code accordingly (i.e.
strconv.FormatInt instead of strconv.Itoa).
Use int64 in progressreader package to avoid integer overflow when
dealing with large quantities. Update related code accordingly.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch fixes a bug where a user specifies a v1 mirror for
--registry-mirror and pull an image from the Hub.
It used to not fallback because of an unexpected error returned when
trying to JSON marshal nginx output.
We now ensure that any unexpected error falls back to the next endpoint
in the list.
Signed-off-by: Tibor Vass <tibor@docker.com>
Rename config.yml to dev-config.yml
Add example-config.yml, a simple configuration file for the official
This was originally made for the the distribution-library-image repo,
but is being moved here to make sure it stays in sync.
Update Dockerfile and docs for the rename.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
includes the http response.
When debugging non-successful registry requests this will place
the error details and http status fields in the same log line
giving easier visibility to what error occured in the request.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Log a warning if the registry generates its own secret.
Update configuration doc, and remove the default secret from the
development config file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Log a warning if the registry generates its own secret.
Update configuration doc, and remove the default secret from the
development config file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This passed in the #744 before merge, but apparently the test changed
since the PR was created in ways that led to a new failures.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Currently login and search do not load per registry certificates.
This is a regression caused by the last refactor since this was recently fixed.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Storage drivers can implement a method called URLFor which can return a direct
url for a given path. The functionality allows the registry to direct clients
to download content directly from the backend storage. This is commonly used
with s3 and cloudfront. Under certain conditions, such as when the registry is
not local to the backend, these redirects can hurt performance and waste
incoming bandwidth on pulls. This feature addition allows one to disable this
feature, if required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Conflicts:
configuration/configuration.go
registry/handlers/app.go
registry/storage/catalog_test.go
registry/storage/manifeststore_test.go
registry/storage/registry.go
Storage drivers can implement a method called URLFor which can return a direct
url for a given path. The functionality allows the registry to direct clients
to download content directly from the backend storage. This is commonly used
with s3 and cloudfront. Under certain conditions, such as when the registry is
not local to the backend, these redirects can hurt performance and waste
incoming bandwidth on pulls. This feature addition allows one to disable this
feature, if required.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Conflicts:
configuration/configuration.go
registry/handlers/app.go
registry/storage/catalog_test.go
registry/storage/manifeststore_test.go
registry/storage/registry.go
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Implement the delete API by implementing soft delete for layers
and blobs by removing link files and updating the blob descriptor
cache. Deletion is configurable - if it is disabled API calls
will return an unsupported error.
We invalidate the blob descriptor cache by changing the linkedBlobStore's
blobStatter to a blobDescriptorService and naming it blobAccessController.
Delete() is added throughout the relevant API to support this functionality.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Implement the delete API by implementing soft delete for layers
and blobs by removing link files and updating the blob descriptor
cache. Deletion is configurable - if it is disabled API calls
will return an unsupported error.
We invalidate the blob descriptor cache by changing the linkedBlobStore's
blobStatter to a blobDescriptorService and naming it blobAccessController.
Delete() is added throughout the relevant API to support this functionality.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: David Verhasselt <david@crowdway.com>
Add clarifying requirement of nginx 1.7.5 to authentication.md file.
Signed-off-by: David Verhasselt <david@crowdway.com>
Revert "Update authentication.md"
This reverts commit a79c28f4376fad333edd94e9b25211830e63abbd.
Add paragraph on manual set-up
Because the logger was incorrectly replaced while adding hooks, log output did
not include the version and instance ids. The main issue was the the
logrus.Entry was replaced with the logger, which included no context. Replacing
the logger on the context is not necessary when configuring hooks since we are
configuring the contexts logger directly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This removes the erroneous http.Handler interface in favor a simple SetHeaders
method that only operattes on the response. Several unnecessary uses of pointer
types were also fixed up.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
To avoid confusion with the registry version number or other project versions,
the specification updates are now lettered.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Some missing descriptions and error code for tags pagination was cleaned up to
ensure clarity. Specifically, we ensure the request variations are named and
the proper error codes are included.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Some missing descriptions and error code for tags pagination was cleaned up to
ensure clarity. Specifically, we ensure the request variations are named and
the proper error codes are included.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The way Repositories() was initially called was somewhat different than
other parts of the client bindings because there was no way to instantiate a
Namespace. This change implements a NewRegistry() function which changes
it so that Repositories() can be called the way one would expect.
It doesn't implement any of the other functions of Namespaces.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
This change removes the Catalog Service and replaces it with a more
simplistic Repositories() method for obtaining a catalog of all
repositories. The Repositories method takes a pre-allocated slice
and fills it up to the size of the slice and returns the amount
filled. The catalog is returned lexicographically and will start
being filled from the last entry passed to Repositories(). If there
are no more entries to fill, io.EOF will be returned.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Conflicts:
registry/client/repository.go
registry/handlers/api_test.go
This change adds a basic catalog endpoint to the API, which returns a list,
or partial list, of all of the repositories contained in the registry. Calls
to this endpoint are somewhat expensive, as every call requires walking a
large part of the registry.
Instead, to maintain a list of repositories, you would first call the catalog
endpoint to get an initial list, and then use the events API to maintain
any future repositories.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Move the specification to use a Link header, rather than a "next" entry in the
json results. This prevents requiring clients from parsing the request body to
issue the next request. It also ensures that the returned response body does
not change in between requests.
The ordering of the specification has been slightly tweaked, as well. Listing
image tags has been moved after the catalog specification. Tag pagination now
heavily references catalog pagination.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Move the specification to use a Link header, rather than a "next" entry in the
json results. This prevents requiring clients from parsing the request body to
issue the next request. It also ensures that the returned response body does
not change in between requests.
The ordering of the specification has been slightly tweaked, as well. Listing
image tags has been moved after the catalog specification. Tag pagination now
heavily references catalog pagination.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This contains a proposal for a catalog API, provided access to the internal
contents of a registry instance. The API endpoint is prefixed with an
underscore, which is illegal in images names, to prevent collisions with
repositories names. To avoid issues with large result sets, a paginated version
of the API is proposed. We make an addition to the tags API to support
pagination to ensure the specification is conistent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This contains a proposal for a catalog API, provided access to the internal
contents of a registry instance. The API endpoint is prefixed with an
underscore, which is illegal in images names, to prevent collisions with
repositories names. To avoid issues with large result sets, a paginated version
of the API is proposed. We make an addition to the tags API to support
pagination to ensure the specification is conistent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
If a registry mirror is using TLS, ensure that certs for it
are picked up from /etc/docker/certs.d
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
The only uses of RequestAuthorization and its associated functions were
removed in 7fed379d95 ("Update graph to
use vendored distribution client for the v2 codepath")
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Since the actual port is 5003, it would make sense to name it local-5003 instead of local-8082
Signed-off-by: Florentin Raud <florentin.raud@gmail.com>
- fully capitalize HTTP in HTTPHeaders
- comment for CONFIGFILE
- camelcase and privatize oldConfigfile, defaultIndexserver
- remove unused var errConfigFileMissing
- comments for methods and functions throughout
- external references to renamed variables changed
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
After consideration, we've changed the main descriptor field name to for number
of bytes to "size" to match convention. While this may be a subjective
argument, commonly we refer to files by their "size" rather than their
"length". This will match other conventions, like `(FileInfo).Size()` and
methods on `io.SizeReaderAt`. Under more broad analysis, this argument doesn't
necessarily hold up. If anything, "size" is shorter than "length".
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After consideration, we've changed the main descriptor field name to for number
of bytes to "size" to match convention. While this may be a subjective
argument, commonly we refer to files by their "size" rather than their
"length". This will match other conventions, like `(FileInfo).Size()` and
methods on `io.SizeReaderAt`. Under more broad analysis, this argument doesn't
necessarily hold up. If anything, "size" is shorter than "length".
Signed-off-by: Stephen J Day <stephen.day@docker.com>
An error level log is already produced within app.authorized() if an
actual unexpected error occurs during authorization, so this warning
level log remains for auditability purposes, but should not be
considered an error condition.
Addresses #704
Signed-off-by: Brian Bland <brian.bland@docker.com>
This changeset provides a common http handler for serving errcodes. This should
unify http responses across webservices in the face of errors.
Several type assertions have been added, as well, to ensure the error interface
is implemented.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Currently canonical name gets set to the local name and displayed in the errors.
Canonical name should be the unique and canonical name for an image.
Use docker.io as the canonical domain for images on the public registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a functional argument to pass a digest to (ManifestService).GetByTag().
If the digest matches an empty manifest and nil error are returned.
See 6bedf7d1cd for server implementation.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
