This commit refactors base.regulator into the 2.4 interfaces and adds a
filesystem configuration option `maxthreads` to configure the regulator.
By default `maxthreads` is set to 100. This means the FS driver is
limited to 100 concurrent blocking file operations. Any subsequent
operations will block in Go until previous filesystem operations
complete.
This ensures that the registry can never open thousands of simultaneous
threads from os filesystem operations.
Note that `maxthreads` can never be less than 25.
Add test case covering parsable string maxthreads
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
subsequent close.
When a blob upload is cancelled close the blobwriter before removing
upload state to ensure old hashstates don't persist.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
It's easily possible for a flood of requests to trigger thousands of
concurrent file accesses on the storage driver. Each file I/O call creates
a new OS thread that is not reaped by the Golang runtime. By limiting it
to only 100 at a time we can effectively bound the number of OS threads
in use by the storage driver.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
Use sockets.DialerFromEnvironment, as is done in other places,
to transparently support SOCKS proxy config from ALL_PROXY
environment variable.
Requires the *engine* have the ALL_PROXY env var set, which
doesn't seem ideal. Maybe it should be a CLI option somehow?
Only tested with push and a v2 registry so far. I'm happy to look
further into testing more broadly, but I wanted to get feedback on
the general idea first.
Signed-off-by: Brett Higgins <brhiggins@arbor.net>
This fix tries to address the issue in #22244 where the remote
API `/auth` will not set the default value of `serveraddress`
if not provided. This behavior happens after only in 1.11.0
and is a regression as in 1.10.3 `serveraddress` will be assigned
with `IndexServer` if no value is provided.
The default value `IndexServer` is assigned to `serveraddress` if
no value provided in this fix.
An integration test `TestAuthApi` has been added to cover this change
This fix fixes#22244.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
The kid value can have an arbitrary format according JOSE specification, but Docker distribution expects a specific format (libtrust fingerprint) to work. This is not written in the documentation so far and is only mentioned in the libtrust source code itself.
Signed-off-by: Fabio Huser <fabio@fh1.ch>
Add link to the official list of $GOOS and $GOARCH values and correct
values that were incorrectly listed in the spec examples.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
If a schema 1 manifest is uploaded with the `disablesignaturestore` option set
to true, then no signatures will exist. Handle this case.
If a schema 1 manifest is pushed, deleted, garbage collected and pushed again, the
repository will contain signature links from the first version, but the blobs will
not exist. Disable the signature store in the garbage-collect command so
signatures are not fetched.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
In 000dec3c6f, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
Seconds to minutes as per code
Correction per Derek
Clarifying failure case
Signed-off-by: Mary Anthony <mary@docker.com>
Clarifying failure case
Signed-off-by: Mary Anthony <mary@docker.com>
HTML links are not converted by HUGO, so will work
on GitHub, but not in the online documentation.
Converted the HTML table (and links) to Markdown
to fix broken links.
Also added a header for the table, because none
was present.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If this slice ends up empty after parsing the HTTP response body, it
means the body is not well-formed. We've probably encountered an error
message produced by something that uses a different JSON schema, or
an error that just happens to validate as JSON.
An empty errcode.Errors slice is not a very useful thing to return,
since its Error() output is just `<nil>`. Detect this case, and instend
return an UnexpectedHTTPResponseError.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Going forward, Docker won't use a different default registry on Windows.
This changes Windows to use the standard Docker Hub registry as the
default registry.
There is a plan in place to migrate existing images from the Windows
registry to Hub's normal registry, in advance of the 1.11 release. In
the mean time, images on the Windows registry can be accessed by
prefixing them with `registry-win-tp3.docker.io/`.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
It is possible for a middlebox to lowercase the URL at somepoint causing a
lookup in the auth challenges table to fail. Lowercase hostname before
using as keys to challenge map.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
the original ```$GOPATH/bin/registry $GOPATH/src/github.com/docker/distribution/cmd/registry/config-example.yml``` leads to the error like
```
Error: unknown command "/Users/EricYang/go/src/github.com/docker/distribution/cmd/registry/config-example.yml" for "registry"
Run 'registry --help' for usage.
```
I think the correct command should be ```registry serve```
Signed-off-by: Eric Yang <EricYang@EricdeMacBook-Pro.local>
Cross repository push tokens were not being cached and could not be used,
now any returned token will be used and the caching is hidden in the getToken function.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Login needs to add an offline token flag to ensure a refresh token is returned by the token endpoint.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The oauth spec defines using a space to separate parts of a scope.
To better comply with future implementations built on oauth use a space to separate the resource scopes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
Ensure Accept headers are sent with TagService.Get (which hits manifest
endpoints). Add support for remote Get and Put for the proxied blobstore.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Middleware code may perform additional checks on blobs written. Allow it
to return access denied errors that will result in 403 Forbidden.
Signed-off-by: Michal Minar <miminar@redhat.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
challenges with the upstream until any proxied data is found not to be local.
Implement auth challenges behind an interface and add to unit tests. Also,
remove a non-sensical unit test.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Making this an exported error value will allow users of the
registry/client/auth module to have consistent behavior between
authentication failures and cases where no credentials are provided.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
When schema2 manifests are rewritten as schema1 currently the etag and docker content digest header keep the value for the schema2 manifest.
Fixes#1444
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
A changeset under consideration for Go 1.7 would automatically copy
headers on redirect. This change future-proofs our code so we won't make
duplicate copies of the headers if net/http does it automatically in the
future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Prevent using strings throughout the code to reference a string key defined in the auth package.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Since RawMessage json receivers take a pointer type, the Header structure should use points in order to call the json.RawMessage marshal and unmarshal functions
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- Fixing index metadata error
- Entering all the comments
- Updating with the build fixes
- Fix Microsoft link broken
- Fix collocate, colocate, to unambiguous co-locate
Signed-off-by: Mary Anthony <mary@docker.com>
This is needed for compatibility with some third-party registries that
send an inappropriate Content-Type header such as text/html.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
https://github.com/docker/distribution/pull/1249 changed token fetching
to parse HTTP error response bodies as serialized errcodes. However,
Docker Hub's authentication endpoint does not return error bodies in
this format. To work around this, convert its format into
ErrCodeUnauthorized or ErrCodeUnknown.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The daemon uses two similar filename extensions to identify different
kinds of certificates. ".crt" files are interpreted as CA certificates,
and ".cert" files are interprted as client certificates. If a CA
certificate is accidentally given the extension ".cert", it will lead to
the following error message:
Missing key ca.key for certificate ca.cert
To make this slightly less confusing, clarify the error message with a
note that CA certificates should use the extension ".crt".
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
The Payload function for schema1 currently returns a signed manifest,
but indicates the content type is that of a manifest that isn't signed.
Note that this breaks compatibility with Registry 2.3 alpha 1 and
Docker 1.10-rc1, because they use the incorrect content type.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
For compatibility with other registries that don't use this exact
variant of the Content-Type header, we need to be more flexible about
what we accept. Any form of "application/json" should be allowed. The
charset should not be included in the comparison.
See docker/docker#19400.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Accidentally checked for err != nil instead of err == nil :/
Also now ensures that only a non-nil option is appended to the create
options slice
Signed-off-by: Brian Bland <brian.bland@docker.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
When an auth request provides the "from" query parameter, the token
handler will add a "pull" scope for the provided repository, refreshing
the token if the overall scope has increased
Signed-off-by: Brian Bland <brian.bland@docker.com>
This makes content type sniffing cleaner. The document just needs to be
decoded into a manifest.Versioned structure. It's no longer a two-step
process.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Create signedManifestHandler and schema2ManifestHandler. Use these to
unmarshal and put the respective types of manifests from manifestStore.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a manifest is deleted by digest, look up the referenced tags in the tag
store and remove all associations.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Markdown linter produced an error on this page;
running markdownlint
ERROR (registry/spec/manifest-v2-2.md) frontmatter: Unexpected non-whitespace char: # Image Manifest Version 2, Schema 2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Use the ones provided by docker/go-connections, they are a drop in replacement.
- Remove pkg/sockets from docker.
- Keep pkg/tlsconfig because libnetwork still needs it and there is a
circular dependency issue.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a followup to #18839. That PR relaxed the fallback logic so that
if a manifest doesn't exist on v2, or the user is unauthorized to access
it, we try again with the v1 protocol. A similar special case is needed
for "pull all tags" (docker pull -a). If the v2 registry doesn't
recognize the repository, or doesn't allow the user to access it, we
should fall back to v1 and try to pull all tags from the v1 registry.
Conversely, if the v2 registry does allow us to list the tags, there
should be no fallback, even if there are errors pulling those tags.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
PR #18590 caused compatibility issues with registries such as gcr.io
which support both the v1 and v2 protocols, but do not provide the same
set of images over both protocols. After #18590, pulls from these
registries would never use the v1 protocol, because of the
Docker-Distribution-Api-Version header indicating that v2 was supported.
Fix the problem by making an exception for the case where a manifest is
not found. This should allow fallback to v1 in case that image is
exposed over the v1 protocol but not the v2 protocol.
This avoids the overly aggressive fallback behavior before #18590 which
would allow protocol fallback after almost any error, but restores
interoperability with mixed v1/v2 registry setups.
Fixes#18832
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Since the CloudFront middleware does not work without an S3 backend, it
became obvious that this documentation should exist within the S3
storage-driver documentation.
Signed-off-by: DJ Enriquez <dj.enriquez@infospace.com>
This is a follow-on to PR #62, and it borrows much of the format
from #993, but uses specific formats for the image manifest and manifest
list (fat manifest) instead of a combined generic format.
The intent of this proposed manifest format is to allow multi-arch, and
allow for full content-addressability of images in the Docker engine.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Adding a more detailed document regarding how to use CloudFront as
middleware for an s3 backed registry.
Signed-off-by: DJ Enriquez <dj.enriquez@infospace.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The current implementation of digest.FromBytes returns an error. This
error can never be non-nil, but its presence in the function signature
means each call site needs error handling code for an error that is
always nil.
I verified that none of the hash.Hash implementations in the standard
library can return an error on Write. Nor can any of the hash.Hash
implementations vendored in distribution.
This commit changes digest.FromBytes not to return an error. If Write
returns an error, it will panic, but as discussed above, this should
never happen.
This commit also avoids using a bytes.Reader to feed data into the hash
function in FromBytes. This makes the hypothetical case that would panic
a bit more explicit, and should also be more performant.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
registry.ResolveAuthConfig() only needs the AuthConfigs from the ConfigFile, so
this change passed just the AuthConfigs.
Signed-off-by: Daniel Nephin <dnephin@gmail.com>
This calls Stat before Open, which should be unnecessary because Open
can handle the case of a nonexistent blob. Removing the Stat saves a
round trip.
This is similar to the removal of stat in Open in #1226.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes both the s3 driver and the oss driver to return the unmunged path
when returning errors.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swift returns an empty object list when trying to read a non-existing object path, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: David li <wenquan.li@hpe.com>
RADOS returns a -EIO when trying to read a non-existing OMAP, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Issue #1186 describes a condition where a null tags response is returned when
using the s3 driver. The issue seems to be related to a missing
PathNotFoundError in s3. This change adds a test for that to get an idea of the
lack of compliance across storage drivers. If the failures are manageable,
we'll add this test condition and fix the s3 driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
ContinueOnError assumes that something of type errcode.Errors contains
at least one error. This is generally true, but might not be true if the
remote registry returns an empty error body or invalid JSON. Add the
bounds check, and in the case where it fails, allow fallbacks to v1.
Fixes#18481
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Fixes a huge problem where a nginx variable was not escaped and nginx was adding the literal string "always" to all requests.
The most obvious result was that basic auth was entirely broken.
Signed-off-by: Carson Anderson <ca@carson-anderson.com>
This change removes the sort() from the Repositories() function since
we're now guaranteed to have a lexigraphically sorted walk.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
If this example was copied and pasted, the shell would try to interpolate `$upstream_http_docker_distribution_api_version` and `$docker_distribution_api_version`.
Signed-off-by: Andrew Meredith <andymeredith@gmail.com>
This change clarifies the way the catalog endpoint returns results
when pagination was not explicitly requested.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Without this commit, three round-trips are required to fetch a blob with
a progress bar. The first is a call to Stat (HEAD request), to determine
the size. Then Open is called, which also calls Stat, and finally
performs a GET request.
Only the GET request is actually needed. The size of the blob can be
sniffed from Content-Length in the GET response.
This commit changes HTTPReadSeeker to automatically detect the size from
Content-Length instead of requiring it to be passed in. The Stat call is
removed from Open because it is no longer necessary.
HTTPReadSeeker now takes an additional errorHandler callback argument which
translates an unsuccessful HTTP response into an appropriate API-level
error. Using a callback for this makes it possible to avoid leaking the
repsonse body to Read's caller, which would make lifecycle management
problematic.
Fixes#1223
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix avoids overwritting the previous error messages, ensures the client gets the correct error messages and not just the most recent message during the pull request.
For this `var lastErr` replaced with a slice which acts as a temp place holder for the list of returned error messages for every attempt.
The slice is later joined and returned to the caller function after searching for the image with diffirent versions(v2,v1,v0).
Updated the code with check for no space left on device error occurance and prevent the
daemon on falling back to v1,v0.
Incorporated the comments from @calavera, @RichardScothern, @cpuguy83
Signed-off-by: Anil Belur <askb23@gmail.com>
The Delete method lists objects under the given path and tries to delete
all of them with a bulk delete request. If the path has no objects
underneath it, the body of this request will be empty, which causes
HTTP-level issues. Specifically, Go's HTTP client senses the empty
request buffer and doesn't include a Content-Length, which causes the
Swift server to fail the request.
This commit fixes the problem by avoiding sending empty bulk delete
requests. This is the correct thing to do anyway, since there's no
reason to request deletion of zero objects.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Previously, this error message would stringify as a pointer address,
which isn't particularly helpful.
This change breaks out the elements of the challenge object such that
the error is appropriately represented.
Signed-off-by: Ted Reed <ted.reed@gmail.com>
contains equal length History and FSLayer arrays.
This is required to prevent malformed manifests being put to the registry and
failing external verification checks.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Errors thrown by storage drivers don't have the name of the driver, causing user
confusion about whether the error is coming from Docker or from a storage driver.
This change adds the storage driver name to each error message.
This required changing ErrUnsupportedDriver to a type, leading to code changes
whenever ErrUnsupportedDriver is used. The tests check whether the driver name
appears in the error message.
Signed-off-by: Amit Shukla <amit.shukla@docker.com>
This updates the vendored docker/distribution to the current master
branch.
Note the following changes:
- The manifest package was split into manifest/schema1. Most references
to the manifest package in the engine needed to be updated to use
schema1 instead.
- Validation functions in api/v2 were replaced by the
distribution/reference package. The engine code has been updated to
use the reference package for validation where necessary. A future PR
will change the engine to use the types defined in
distribution/reference more comprehensively.
- The reference package explicitly allows double _ characters in
repository names. registry_test.go was updated for this.
- TestPullFailsWithAlteredManifest was corrupting the manifest JSON, now
that the schema1 package unmarshals the correct payload. The test is
being changed to modify the JSON without affecting its length, which
allows the pull to succeed to the point where digest validation
happens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This reverts commit c2d5c29437.
Commit caused issues on systems with case-insensitive filesystems.
Revert for now
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Move autogen/dockerversion to version
- Update autogen and "builds" to use this package and a build flag
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This extends the specification for the Bearer token response to include
information pertaining to when an issued Bearer token will expire.
This also allows the client to accept `access_token` as an alias for `token`.
Signed-off-by: Matt Moore <mattmoor@google.com>
This extends the specification for the Bearer token response to include
information pertaining to when an issued Bearer token will expire.
This also allows the client to accept `access_token` as an alias for `token`.
Signed-off-by: Matt Moore <mattmoor@google.com>
The docs don't render emoji, so replaced the `⚠️` with
a `**Warning**:` to keep the formatting consisten with
`**Note**:` used in other parts of the docs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The proxy scheduler implemented its own timer state machine. It's
simpler and more efficient to leverage the Go runtime's timer heap by
using time.AfterFunc.
This commit adds a time.Timer to each scheduler entry, and starts and
stops those timers as necessary. Then the mainloop goroutine and its
associated logic are not needed.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds a variable to help nginx add the
Docker-Distribution-Api-Version when using basic auth, and not add the
header when it sees it from the upstream.
Also fix some minor spelling/grammar issues.
Signed-off-by: Sharif Nassar <sharif@mrwacky.com>
To ensure that we only unmarshal the verified payload into the contained
manifest, we first copy the entire incoming buffer into Raw and then unmarshal
only the Payload portion of the incoming bytes. If the contents is later
verified, the caller can then be sure that the contents of the Manifest fields
can be trusted.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There seems to be a need for a type that represents a way of pointing
to an image, irrespective of the implementation.
This patch defines a Reference interface and provides 3 implementations:
- TagReference: when only a tag is provided
- DigestReference: when a digest (according to the digest package) is
provided, can include optional tag as well
Validation of references are purely syntactic.
There is also a strong type for tags, analogous to digests, as well
as a strong type for Repository from which clients can access the
hostname alone, or the repository name without the hostname, or both
together via the String() method.
For Repository, the files names.go and names_test.go were moved from
the v2 package.
Signed-off-by: Tibor Vass <tibor@docker.com>
Pick up name regexp change in distribution to allow matching of hostnames as a valid component of a repository.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
of readers joining current downloads. Concurrent requests for the same blob
will not block, but only the first instance will be comitted locally.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Fixes https://github.com/docker/distribution/issues/1062
This relaxes the naming restrictions places on Docker images to permit
valid hostnames according to [RFC-2396](https://www.ietf.org/rfc/rfc2396.txt).
It deviates from the RFC in the following ways:
1) Allow underscores where we allow hyphens (hostnames don't allow
underscores, which we must for backwards compatibility).
2) Leave "top-level" name segments unrestricted (domains require an
alpha character to begin a top-level domain, e.g. "com").
3) DO NOT allow a trailing dot, as permitted by FQDNs.
Signed-off-by: Matt Moore <mattmoor@google.com>
It seems that enabling proxy stops my instance from accepting local pushes, but I can't find mention of that in the docs.
Signed-off-by: Jason Freidman <jason@periscope.io>
Search terms shouldn't be restricted to only full valid repository
names. It should be perfectly valid to search using a part of a name,
even if it ends with a period, dash or underscore.
Signed-off-by: Hu Keping <hukeping@huawei.com>
This allows the administrator to specify an externally-reachable URL for
the registry. It takes precedence over the X-Forwarded-Proto and
X-Forwarded-Host headers, and the hostname in the request.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This allows the administrator to specify an externally-reachable URL for
the registry. It takes precedence over the X-Forwarded-Proto and
X-Forwarded-Host headers, and the hostname in the request.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
