Back in the before time, the best practices surrounding usage of Context
weren't quite worked out. We defined our own type to make usage easier.
As this packaged was used elsewhere, it make it more and more
challenging to integrate with the forked `Context` type. Now that it is
available in the standard library, we can just use that one directly.
To make usage more consistent, we now use `dcontext` when referring to
the distribution context package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
In some conditions, regulator.exit may not send a signal to blocked
regulator.enter.
Let's assume we are in the critical section of regulator.exit and r.available
is equal to 0. And there are three more gorotines. One goroutine also executes
regulator.exit and waits for the lock. Rest run regulator.enter and wait for
the signal.
We send the signal, and after releasing the lock, there will be lock
contention:
1. Wait from regulator.enter
2. Lock from regulator.exit
If the winner is Lock from regulator.exit, we will not send another signal to
unlock the second Wait.
Signed-off-by: Oleg Bulatov <obulatov@redhat.com>
`app.driver.List` on `"/"` is very expensive if registry contains significant amount of images. And the result isn't used anyways.
In most (if not all) storage drivers, `Stat` has a cheaper implementation, so use it instead to achieve the same goal.
Signed-off-by: yixi zhang <yixi@memsql.com>
See #2077 for background.
The PR #1438 which was not reviewed by azure folks basically introduced
a race condition around uploads to the same blob by multiple clients
concurrently as it used the "writer" type for PutContent(), introduced in #1438.
This does chunked upload of blobs using "AppendBlob" type, which was not atomic.
Usage of "writer" type and thus AppendBlobs on metadata files is currently not
concurrency-safe and generally, they are not the right type of blob for the job.
This patch fixes PutContent() to use the atomic upload operation that works
for uploads smaller than 64 MB and creates blobs with "BlockBlob" type. To be
backwards compatible, we query the type of the blob first and if it is not
a "BlockBlob" we delete the blob first before doing an atomic PUT. This
creates a small inconsistency/race window "only once". Once the blob is made
"BlockBlob", it is overwritten with a single PUT atomicallly next time.
Therefore, going forward, PutContent() will be producing BlockBlobs and it
will silently migrate the AppendBlobs introduced in #1438 to BlockBlobs with
this patch.
Tested with existing code side by side, both registries with and without this
patch work fine without breaking each other. So this should be good from a
backwards/forward compatiblity perspective, with a cost of doing an extra
HEAD checking the blob type.
Fixes#2077.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Updating to a recent version of Azure Storage SDK to be
able to patch some memory leaks through configurable HTTP client
changes which were made possible by recent patches to it.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The current code determines the header order for the
"string-to-sign" payload by sorting on the concatenation
of headers and values, whereas it should only happen on the
key.
During multipart uploads, since `x-amz-copy-source-range` and
`x-amz-copy-source` headers are present, V2 signatures fail to
validate since header order is swapped.
This patch reverts to the expected behavior.
Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org>
Driver was passing connections by copying. Storing
`swift.Connection` as pointer to fix the warnings.
Ref: #2030.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
In GetContent() we read the bytes from a blob but do not close
the underlying response body.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Context should use type values instead of strings.
Updated direct calls to WithValue, but still other uses of string keys.
Update Acl to ACL in s3 driver.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This change to the S3 Move method uses S3's multipart upload API to copy
objects whose size exceeds a threshold. Parts are copied concurrently.
The level of concurrency, part size, and threshold are all configurable
with reasonable defaults.
Using the multipart upload API has two benefits.
* The S3 Move method can now handle objects over 5 GB, fixing #886.
* Moving most objects, and espectially large ones, is faster. For
example, moving a 1 GB object averaged 30 seconds but now averages 10.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This is already supported by ncw/swift, so we just need to pass the
parameters from the storage driver.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
Use the much faster math/rand.Read function where cryptographic
guarantees are not required. The unit test suite should speed up a
little bit but we've already optimized around this, so it may not
matter.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
* Add Object ACL Support to the S3 Storage Backend
Signed-off-by: Frank Chen <frankchn@gmail.com>
* Made changes per @RichardScothern's comments
Signed-off-by: Frank Chen <frankchn@gmail.com>
* Fix Typos
Signed-off-by: Frank Chen <frankchn@gmail.com>
This is similar to waitForSegmentsToShowUp which is called during
Close/Commit. Intuitively, you wouldn't expect missing segments to be a
problem during read operations, since the previous Close/Commit
confirmed that all segments are there.
But due to the distributed nature of Swift, the read request could be
hitting a different storage node of the Swift cluster, where the
segments are still missing.
Load tests on my team's staging Swift cluster have shown this to occur
about once every 100-200 layer uploads when the Swift proxies are under
high load. The retry logic, borrowed from waitForSegmentsToShowUp, fixes
this temporary inconsistency.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit refactors base.regulator into the 2.4 interfaces and adds a
filesystem configuration option `maxthreads` to configure the regulator.
By default `maxthreads` is set to 100. This means the FS driver is
limited to 100 concurrent blocking file operations. Any subsequent
operations will block in Go until previous filesystem operations
complete.
This ensures that the registry can never open thousands of simultaneous
threads from os filesystem operations.
Note that `maxthreads` can never be less than 25.
Add test case covering parsable string maxthreads
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
It's easily possible for a flood of requests to trigger thousands of
concurrent file accesses on the storage driver. Each file I/O call creates
a new OS thread that is not reaped by the Golang runtime. By limiting it
to only 100 at a time we can effectively bound the number of OS threads
in use by the storage driver.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
In 326c3a9c49, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
