Commit graph

29 commits

Author SHA1 Message Date
Derek McGowan
d8fcbeeb71
Update registry to use WithName for creating Named values
The registry uses partial Named values which the named parsers
no longer support. To allow the registry service to continue
to operate without canonicalization, switch to use WithName.
In the future, the registry should start using fully canonical
values on the backend and WithName should no longer support
creating partial values.

Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
2017-01-18 13:56:56 -08:00
Stephen J Day
532ec9f036
digest: migrate to opencontainers/go-digest
Signed-off-by: Stephen J Day <stephen.day@docker.com>
2017-01-06 15:42:03 -08:00
Stephen J Day
01dfa0fcb9
digest: use digest.Parse over ParseDigest
Signed-off-by: Stephen J Day <stephen.day@docker.com>
2016-12-15 15:07:42 -08:00
Cezar Sa Espinola
e015cbadd6
registry: avoid formatting errors with %#v
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
2016-07-01 11:30:58 -03:00
Richard Scothern
ccfa25cf00 If resumable digest support is disabled, detct this when closing the blobwriter
and allow the close to continue.  Also update the name of the function.

Signed-off-by: Richard Scothern <richard.scothern@docker.com>
2016-06-13 17:35:06 -07:00
Richard Scothern
1fc752c718 Merge pull request #1706 from aibaars/registry-size-close
Blobwriter: call BlobWriter.Size after BlobWriter.Close
2016-06-13 16:29:35 -07:00
Arthur Baars
0490ff450b Blobwriter: call BlobWriter.Size after BlobWriter.Close
Signed-off-by: Arthur Baars <arthur@semmle.com>
2016-05-06 13:04:30 +01:00
Troels Thomsen
3730470b64 Pass through known errors
Signed-off-by: Troels Thomsen <troels@thomsen.io>
2016-04-29 23:34:24 +02:00
Richard Scothern
a5d372535e Merge pull request #1502 from RichardScothern/auth-url-endpoints
URL parse auth endpoints to normalize hostname to lowercase.
2016-03-14 16:28:24 -07:00
Brian Bland
ff03381d49 Adds new storagedriver.FileWriter interface
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
 + Inmemory
 + Filesystem
 + S3
 + Azure

Signed-off-by: Brian Bland <brian.bland@docker.com>
2016-03-08 16:37:44 -08:00
Richard Scothern
8bd613aa11 URL parse auth endpoints to normalize hostname to lowercase.
It is possible for a middlebox to lowercase the URL at somepoint causing a
lookup in the auth challenges table to fail.  Lowercase hostname before
using as keys to challenge map.

Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
2016-03-07 14:08:21 -08:00
Brian Bland
3ae504384c Merge pull request #1473 from miminar/pass-blob-size
Commit uploaded blob with size
2016-02-29 10:26:45 -08:00
Michal Minar
21a0878665 Commit blob with known size
Signed-off-by: Michal Minar <miminar@redhat.com>
2016-02-23 08:44:06 +01:00
Michal Minar
4d15bf071c Defined ErrAccessDenied error
Middleware code may perform additional checks on blobs written. Allow it
to return access denied errors that will result in 403 Forbidden.

Signed-off-by: Michal Minar <miminar@redhat.com>
2016-02-22 21:12:59 +01:00
Aaron Lehmann
b0989446eb Rename Name method of Repository to Named
This makes code that gets the name as a string read like
repo.Named().Name() instead of repo.Name().Name().

Requested in
https://github.com/docker/docker/pull/19887#discussion_r51479753

Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2016-02-04 09:55:36 -08:00
Aaron Lehmann
2b20b0167a Change URLBuilder methods to use references for tags and digests
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2016-01-22 14:49:29 -08:00
Aaron Lehmann
4441333912 Use reference package internally
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.

Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2016-01-22 14:47:05 -08:00
Brian Bland
3ef917c269 Fixes cross-repo blob mounting in the BlobUploadHandler
Accidentally checked for err != nil instead of err == nil :/
Also now ensures that only a non-nil option is appended to the create
options slice

Signed-off-by: Brian Bland <brian.bland@docker.com>
2016-01-13 19:21:45 -08:00
Brian Bland
ce88d8a6f4 Adds functional options arguments to the Blobs Create method
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository

Signed-off-by: Brian Bland <brian.bland@docker.com>
2016-01-13 16:42:59 -08:00
Brian Bland
5df21570a7 Adds cross-repository blob mounting behavior
Extends blob upload POST endpoint to support mount and from query
parameters as described in #634

Signed-off-by: Brian Bland <brian.bland@docker.com>
2016-01-08 13:53:18 -08:00
Aaron Lehmann
a601f92336 Add an "enabled" parameter under "readonly", and make it as if the mutable handlers don't exist when read-only mode is enabled
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2015-09-22 15:49:26 -07:00
Aaron Lehmann
c9bb330b71 Add a read-only mode as a configuration option
Add "readonly" under the storage/maintenance section. When this is set
to true, uploads and deletions will return 503 Service Unavailable
errors.

Document the parameter and add some unit testing.

Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2015-09-22 15:47:48 -07:00
Richard Scothern
776a4ffbe8 Change some incorrect error types in proxy stores from API errors to
distribution errors.  Fill in missing checks for mutations on a registry pull-through
cache.  Add unit tests and update documentation.

Also, give v2.ErrorCodeUnsupported an HTTP status code, previously it was
defaulting to 500, now its 405 Method Not Allowed.

Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
2015-08-11 14:16:24 -07:00
Aaron Lehmann
9c58954a6e Factor CloseNotifier use into a new function
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2015-07-31 17:30:26 -07:00
Aaron Lehmann
6cb5670ba5 Use CloseNotifier to supress spurious HTTP 400 errors on early disconnect
When a client disconnects without completing a HTTP request, we were
attempting to process the partial request, which usually leads to a 400
error. These errors can pollute the logs and make it more difficult to
track down real bugs.

This change uses CloseNotifier to detect disconnects. In combination
with checking Content-Length, we can detect a disconnect before sending
the full payload, and avoid logging a 400 error.

This logic is only applied to PUT, POST, and PATCH endpoints, as these
are the places where disconnects during a request are most likely to
happen.

Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
2015-07-31 17:30:26 -07:00
Doug Davis
441f7cac87 Round 4
Signed-off-by: Doug Davis <dug@us.ibm.com>
2015-06-11 21:33:35 -07:00
Doug Davis
8a0827f799 Round 2
Make Errors a []Error

Signed-off-by: Doug Davis <dug@us.ibm.com>
2015-05-26 17:18:32 -07:00
Doug Davis
0a6a6f5b81 Move ErrorCode logic to new errcode package
Make HTTP status codes match the ErrorCode by looking it up in the Descriptors

Signed-off-by: Doug Davis <dug@us.ibm.com>
2015-05-26 13:18:54 -07:00
Stephen J Day
593bbccdb5 Refactor Blob Service API
This PR refactors the blob service API to be oriented around blob descriptors.
Identified by digests, blobs become an abstract entity that can be read and
written using a descriptor as a handle. This allows blobs to take many forms,
such as a ReadSeekCloser or a simple byte buffer, allowing blob oriented
operations to better integrate with blob agnostic APIs (such as the `io`
package). The error definitions are now better organized to reflect conditions
that can only be seen when interacting with the blob API.

The main benefit of this is to separate the much smaller metadata from large
file storage. Many benefits also follow from this. Reading and writing has
been separated into discrete services. Backend implementation is also
simplified, by reducing the amount of metadata that needs to be picked up to
simply serve a read. This also improves cacheability.

"Opening" a blob simply consists of an access check (Stat) and a path
calculation. Caching is greatly simplified and we've made the mapping of
provisional to canonical hashes a first-class concept. BlobDescriptorService
and BlobProvider can be combined in different ways to achieve varying effects.

Recommend Review Approach
-------------------------

This is a very large patch. While apologies are in order, we are getting a
considerable amount of refactoring. Most changes follow from the changes to
the root package (distribution), so start there. From there, the main changes
are in storage. Looking at (*repository).Blobs will help to understand the how
the linkedBlobStore is wired. One can explore the internals within and also
branch out into understanding the changes to the caching layer. Following the
descriptions below will also help to guide you.

To reduce the chances for regressions, it was critical that major changes to
unit tests were avoided. Where possible, they are left untouched and where
not, the spirit is hopefully captured. Pay particular attention to where
behavior may have changed.

Storage
-------

The primary changes to the `storage` package, other than the interface
updates, were to merge the layerstore and blobstore. Blob access is now
layered even further. The first layer, blobStore, exposes a global
`BlobStatter` and `BlobProvider`. Operations here provide a fast path for most
read operations that don't take access control into account. The
`linkedBlobStore` layers on top of the `blobStore`, providing repository-
scoped blob link management in the backend. The `linkedBlobStore` implements
the full `BlobStore` suite, providing access-controlled, repository-local blob
writers. The abstraction between the two is slightly broken in that
`linkedBlobStore` is the only channel under which one can write into the global
blob store. The `linkedBlobStore` also provides flexibility in that it can act
over different link sets depending on configuration. This allows us to use the
same code for signature links, manifest links and blob links.  Eventually, we
will fully consolidate this storage.

The improved cache flow comes from the `linkedBlobStatter` component
of `linkedBlobStore`. Using a `cachedBlobStatter`, these combine together to
provide a simple cache hierarchy that should streamline access checks on read
and write operations, or at least provide a single path to optimize. The
metrics have been changed in a slightly incompatible way since the former
operations, Fetch and Exists, are no longer relevant.

The fileWriter and fileReader have been slightly modified to support the rest
of the changes. The most interesting is the removal of the `Stat` call from
`newFileReader`. This was the source of unnecessary round trips that were only
present to look up the size of the resulting reader. Now, one must simply pass
in the size, requiring the caller to decide whether or not the `Stat` call is
appropriate. In several cases, it turned out the caller already had the size
already. The `WriterAt` implementation has been removed from `fileWriter`,
since it is no longer required for `BlobWriter`, reducing the number of paths
which writes may take.

Cache
-----

Unfortunately, the `cache` package required a near full rewrite. It was pretty
mechanical in that the cache is oriented around the `BlobDescriptorService`
slightly modified to include the ability to set the values for individual
digests. While the implementation is oriented towards caching, it can act as a
primary store. Provisions are in place to have repository local metadata, in
addition to global metadata. Fallback is implemented as a part of the storage
package to maintain this flexibility.

One unfortunate side-effect is that caching is now repository-scoped, rather
than global. This should have little effect on performance but may increase
memory usage.

Handlers
--------

The `handlers` package has been updated to leverage the new API. For the most
part, the changes are superficial or mechanical based on the API changes. This
did expose a bug in the handling of provisional vs canonical digests that was
fixed in the unit tests.

Configuration
-------------

One user-facing change has been made to the configuration and is updated in
the associated documentation. The `layerinfo` cache parameter has been
deprecated by the `blobdescriptor` cache parameter. Both are equivalent and
configuration files should be backward compatible.

Notifications
-------------

Changes the `notification` package are simply to support the interface
changes.

Context
-------

A small change has been made to the tracing log-level. Traces have been moved
from "info" to "debug" level to reduce output when not needed.

Signed-off-by: Stephen J Day <stephen.day@docker.com>
2015-05-15 17:05:18 -07:00