See #2077 for background.
The PR #1438 which was not reviewed by azure folks basically introduced
a race condition around uploads to the same blob by multiple clients
concurrently as it used the "writer" type for PutContent(), introduced in #1438.
This does chunked upload of blobs using "AppendBlob" type, which was not atomic.
Usage of "writer" type and thus AppendBlobs on metadata files is currently not
concurrency-safe and generally, they are not the right type of blob for the job.
This patch fixes PutContent() to use the atomic upload operation that works
for uploads smaller than 64 MB and creates blobs with "BlockBlob" type. To be
backwards compatible, we query the type of the blob first and if it is not
a "BlockBlob" we delete the blob first before doing an atomic PUT. This
creates a small inconsistency/race window "only once". Once the blob is made
"BlockBlob", it is overwritten with a single PUT atomicallly next time.
Therefore, going forward, PutContent() will be producing BlockBlobs and it
will silently migrate the AppendBlobs introduced in #1438 to BlockBlobs with
this patch.
Tested with existing code side by side, both registries with and without this
patch work fine without breaking each other. So this should be good from a
backwards/forward compatiblity perspective, with a cost of doing an extra
HEAD checking the blob type.
Fixes#2077.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Golint now checks for new lines at the end of go error strings,
remove these unneeded new lines.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Updating to a recent version of Azure Storage SDK to be
able to patch some memory leaks through configurable HTTP client
changes which were made possible by recent patches to it.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The current code determines the header order for the
"string-to-sign" payload by sorting on the concatenation
of headers and values, whereas it should only happen on the
key.
During multipart uploads, since `x-amz-copy-source-range` and
`x-amz-copy-source` headers are present, V2 signatures fail to
validate since header order is swapped.
This patch reverts to the expected behavior.
Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org>
Driver was passing connections by copying. Storing
`swift.Connection` as pointer to fix the warnings.
Ref: #2030.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
In GetContent() we read the bytes from a blob but do not close
the underlying response body.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
To allow generic manifest walking, we define an interface method of
`References` that returns the referenced items in the manifest. The
current implementation does not return the config target from schema2,
making this useless for most applications.
The garbage collector has been modified to show the utility of this
correctly formed `References` method. We may be able to make more
generic traversal methods with this, as well.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Context should use type values instead of strings.
Updated direct calls to WithValue, but still other uses of string keys.
Update Acl to ACL in s3 driver.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The Redis tests were failing with a "connection pool exhausted" error
from Redigo. Closing the connection used for FLUSHDB fixes the problem.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This change to the S3 Move method uses S3's multipart upload API to copy
objects whose size exceeds a threshold. Parts are copied concurrently.
The level of concurrency, part size, and threshold are all configurable
with reasonable defaults.
Using the multipart upload API has two benefits.
* The S3 Move method can now handle objects over 5 GB, fixing #886.
* Moving most objects, and espectially large ones, is faster. For
example, moving a 1 GB object averaged 30 seconds but now averages 10.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This is already supported by ncw/swift, so we just need to pass the
parameters from the storage driver.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
Use the much faster math/rand.Read function where cryptographic
guarantees are not required. The unit test suite should speed up a
little bit but we've already optimized around this, so it may not
matter.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Previous component-wise path comparison is recursive and generates a
large amount of garbage. This more efficient version simply replaces the
path comparison with the zero-value to sort before everything. We do
this by replacing the byte-wise comparison that swaps a single character
inline for the separator comparison, such that separators sort first.
The resulting implementation provides component-wise path comparison
with no cost incurred for allocation or stack frame.
Direction of the comparison is also reversed to match Go style.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
* Allow precomputed stats on cross-mounted blobs
Signed-off-by: Michal Minář <miminar@redhat.com>
* Extended cross-repo mount tests
Signed-off-by: Michal Minář <miminar@redhat.com>
* Add Object ACL Support to the S3 Storage Backend
Signed-off-by: Frank Chen <frankchn@gmail.com>
* Made changes per @RichardScothern's comments
Signed-off-by: Frank Chen <frankchn@gmail.com>
* Fix Typos
Signed-off-by: Frank Chen <frankchn@gmail.com>
Pass the manifestURL directly into the schema2 manifest handler instead of
accessing through the repository as it has since the reference is now an
interface.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Until we have some experience hosting foreign layer manifests, the Hub
operators wish to limit foreign layers on Hub. To that end, this change
adds registry configuration options to restrict the URLs that may appear
in pushed manifests.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This fixes errors other than io.EOF from being dropped when a storage driver
lists repositories. For example, filesystem driver may point to a missing
directory and errors, which then gets subsequently dropped.
Signed-off-by: Edgar Lee <edgar.lee@docker.com>
This is similar to waitForSegmentsToShowUp which is called during
Close/Commit. Intuitively, you wouldn't expect missing segments to be a
problem during read operations, since the previous Close/Commit
confirmed that all segments are there.
But due to the distributed nature of Swift, the read request could be
hitting a different storage node of the Swift cluster, where the
segments are still missing.
Load tests on my team's staging Swift cluster have shown this to occur
about once every 100-200 layer uploads when the Swift proxies are under
high load. The retry logic, borrowed from waitForSegmentsToShowUp, fixes
this temporary inconsistency.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit refactors base.regulator into the 2.4 interfaces and adds a
filesystem configuration option `maxthreads` to configure the regulator.
By default `maxthreads` is set to 100. This means the FS driver is
limited to 100 concurrent blocking file operations. Any subsequent
operations will block in Go until previous filesystem operations
complete.
This ensures that the registry can never open thousands of simultaneous
threads from os filesystem operations.
Note that `maxthreads` can never be less than 25.
Add test case covering parsable string maxthreads
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
subsequent close.
When a blob upload is cancelled close the blobwriter before removing
upload state to ensure old hashstates don't persist.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
It's easily possible for a flood of requests to trigger thousands of
concurrent file accesses on the storage driver. Each file I/O call creates
a new OS thread that is not reaped by the Golang runtime. By limiting it
to only 100 at a time we can effectively bound the number of OS threads
in use by the storage driver.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
Not just when Commit()ing the result. This fixes some errors I observed
when the layer (i.e. the DLO) is Stat()ed immediately after closing,
and reports the wrong file size because the container listing is not
yet up-to-date.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
If a schema 1 manifest is uploaded with the `disablesignaturestore` option set
to true, then no signatures will exist. Handle this case.
If a schema 1 manifest is pushed, deleted, garbage collected and pushed again, the
repository will contain signature links from the first version, but the blobs will
not exist. Disable the signature store in the garbage-collect command so
signatures are not fetched.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
In 326c3a9c49, which was only intended to
be a refactoring commit, the behavior of this block subtly changed so
that unknown types of errors would be swallowed instead of propagated.
I noticed this while investigating an error similar to #1539 aka
docker/docker#21290. It appears that during GetContent() for a
hashstate, the Swift proxy produces an error. Since this error was
silently swallowed, an empty []byte is used to restart the hash, then
producing the digest of the empty string instead of the layer's digest.
This PR will not fix the issue, but it should make the actual error more
visible by propagating it into `blobWriter#resumeDigest' and
'blobWriter#validateBlob', respectively.
Signed-off-by: Stefan Majewsky <stefan.majewsky@sap.com>
This commit adds context-specific documentation on StorageDriver,
StorageDriverFactory, and the factory’s Register func, explaining how
the internal registration mechanism should be used.
This documentation follows from the thread starting at
https://github.com/deis/builder/pull/262/files#r56720200.
cc/ @stevvooe
Signed-off-by: Aaron Schlesinger <aschlesinger@deis.com>
Updates registry storage code to use this for better resumable writes.
Implements this interface for the following drivers:
+ Inmemory
+ Filesystem
+ S3
+ Azure
Signed-off-by: Brian Bland <brian.bland@docker.com>
The Move operation is only used to move uploaded blobs
to their final destination. There is no point in implementing
Move on "folders". Apart from simplifying the code, this also
saves an HTTP request.
Signed-off-by: Arthur Baars <arthur@semmle.com>
- Includes a change in the command to run the registry. The registry
server itself is now started up as a subcommand.
- Includes changes to the high level interfaces to support enumeration
of various registry objects.
Signed-off-by: Andrew T Nguyen <andrew.nguyen@docker.com>
Offset can be more than CurrentSize as long as this case is checked
by DriverSuite.testContinueStreamAppend.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Fixes bug in TestStorageClass for s3aws driver where the "standard" file
was checked for reduced-redundnancy storage.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Keeps old s3 driver, renames to s3goamz, registers new s3 driver as both
"s3" and "s3aws"
Changes cloudfront middleware to use aws-sdk-go
Signed-off-by: Brian Bland <brian.bland@docker.com>
Add option for specifying trust key for signing schema1 manifests.
Since schema1 signature key identifiers are not verified anywhere and deprecated, storing signatures is no longer a requirement.
Furthermore in schema2 there is no signature, requiring the registry to already add signatures to generated schema1 manifests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Treats nil parameters the same as unprovided parameters (fixes issues
where certain parameters are printed to "<nil>").
Accepts "true" and "false" string values for boolean parameters.
Signed-off-by: Brian Bland <brian.bland@docker.com>
Uses docker/goamz instead of AdRoll/goamz
Adds a registry UA string param to the storage parameters when
constructing the storage driver for the registry App.
This could be used by other storage drivers as well
Signed-off-by: Brian Bland <brian.bland@docker.com>
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Verify that the file(s) have been deleted after calling Delete,
and retry if this is not the case. Furthermore, report the error
if a Delete operation fails.
Signed-off-by: Arthur Baars <arthur@semmle.com>
Remove the requirement of file system access to run GCS unit tests. Deconstruct
the input parameters to take the private key and email which can be specified on
the build system via environment variables.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
This makes content type sniffing cleaner. The document just needs to be
decoded into a manifest.Versioned structure. It's no longer a two-step
process.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Create signedManifestHandler and schema2ManifestHandler. Use these to
unmarshal and put the respective types of manifests from manifestStore.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When a manifest is deleted by digest, look up the referenced tags in the tag
store and remove all associations.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Add a generic Manifest interface to represent manifests in the registry and
remove references to schema specific manifests.
Add a ManifestBuilder to construct Manifest objects. Concrete manifest builders
will exist for each manifest type and implementations will contain manifest
specific data used to build a manifest.
Remove Signatures() from Repository interface.
Signatures are relevant only to schema1 manifests. Move access to the signature
store inside the schema1 manifestStore. Add some API tests to verify
signature roundtripping.
schema1
-------
Change the way data is stored in schema1.Manifest to enable Payload() to be used
to return complete Manifest JSON from the HTTP handler without knowledge of the
schema1 protocol.
tags
----
Move tag functionality to a seperate TagService and update ManifestService
to use the new interfaces. Implement a driver based tagService to be backward
compatible with the current tag service.
Add a proxyTagService to enable the registry to get a digest for remote manifests
from a tag.
manifest store
--------------
Remove revision store and move all signing functionality into the signed manifeststore.
manifest registration
---------------------
Add a mechanism to register manifest media types and to allow different manifest
types to be Unmarshalled correctly.
client
------
Add ManifestServiceOptions to client functions to allow tags to be passed into Put and
Get for building correct registry URLs. Change functional arguments to be an interface type
to allow passing data without mutating shared state.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
tarsum is not actually used by the registry. Remove support for it.
Convert numerous uses in unit tests to SHA256.
Update docs to remove mentions of tarsums (which were often inaccurate).
Remove tarsum dependency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The current implementation of digest.FromBytes returns an error. This
error can never be non-nil, but its presence in the function signature
means each call site needs error handling code for an error that is
always nil.
I verified that none of the hash.Hash implementations in the standard
library can return an error on Write. Nor can any of the hash.Hash
implementations vendored in distribution.
This commit changes digest.FromBytes not to return an error. If Write
returns an error, it will panic, but as discussed above, this should
never happen.
This commit also avoids using a bytes.Reader to feed data into the hash
function in FromBytes. This makes the hypothetical case that would panic
a bit more explicit, and should also be more performant.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes both the s3 driver and the oss driver to return the unmunged path
when returning errors.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Swift returns an empty object list when trying to read a non-existing object path, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: David li <wenquan.li@hpe.com>
RADOS returns a -EIO when trying to read a non-existing OMAP, treat it as a
PathNotFoundError when trying to list a non existing virtual directory.
Signed-off-by: Vincent Giersch <vincent@giersch.fr>
Issue #1186 describes a condition where a null tags response is returned when
using the s3 driver. The issue seems to be related to a missing
PathNotFoundError in s3. This change adds a test for that to get an idea of the
lack of compliance across storage drivers. If the failures are manageable,
we'll add this test condition and fix the s3 driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
