--- description: Explains how to deploy a registry keywords: registry, on-prem, images, tags, repository, distribution, deployment title: Deploy a registry server --- Before you can deploy a registry, you need to install Docker on the host. A registry is an instance of the `registry` image, and runs within Docker. This topic provides basic information about deploying and configuring a registry. For an exhaustive list of configuration options, see the [configuration reference](configuration.md). If you have an air-gapped datacenter, see [Considerations for air-gapped registries](#considerations-for-air-gapped-registries). ## Run a local registry Use a command like the following to start the registry container: ```bash $ docker run -d -p 5000:5000 --restart=always --name registry registry:2 ``` The registry is now ready to use. > **Warning**: These first few examples show registry configurations that are > only appropriate for testing. A production-ready registry must be protected by > TLS and should ideally use an access-control mechanism. Keep reading and then > continue to the [configuration guide](configuration.md) to deploy a > production-ready registry. ## Copy an image from Docker Hub to your registry You can pull an image from Docker Hub and push it to your registry. The following example pulls the `ubuntu:16.04` image from Docker Hub and re-tags it as `my-ubuntu`, then pushes it to the local registry. Finally, the `ubuntu:16.04` and `my-ubuntu` images are deleted locally and the `my-ubuntu` image is pulled from the local registry. 1. Pull the `ubuntu:16.04` image from Docker Hub. ```bash $ docker pull ubuntu:16.04 ``` 2. Tag the image as `localhost:5000/my-ubuntu`. This creates an additional tag for the existing image.When the first part of the tag is a hostname and port, Docker interprets this as the location of a registry, when pushing. ```bash $ docker tag ubuntu:16.04 localhost:5000/my-ubuntu ``` 3. Push the image to the local registry running at `localhost:5000`: ```bash $ docker push localhost:5000/my-ubuntu ``` 4. Remove the locally-cached `ubuntu:16.04` and `localhost:5000/my-ubuntu` images, so that you can test pulling the image from your registry. This does not remove the `localhost:5000/my-ubuntu` image from your registry. ```bash $ docker image remove ubuntu:16.04 $ docker image remove localhost:5000/my-ubuntu ``` 5. Pull the `localhost:5000/my-ubuntu` image from your local registry. ```bash $ docker pull localhost:5000/my-ubuntu ``` ## Stop a local registry To stop the registry, use the same `docker stop` command as with any other container. ```bash $ docker stop registry ``` To remove the container, use `docker rm`. ```bash $ docker stop registry && docker rm -v registry ``` ## Basic configuration To configure the container, you can pass additional or modified options to the `docker run` command. The following sections provide basic guidelines for configuring your registry. For more details, see the [registry configuration reference](configuration.md). ### Start the registry automatically If you want to use the registry as part of your permanent infrastructure, you should set it to restart automatically when Docker restarts or if it exits. This example uses the `--restart always` flag to set a restart policy for the registry. ```bash $ docker run -d \ -p 5000:5000 \ --restart=always \ --name registry \ registry:2 ``` ### Customize the published port If you are already using port 5000, or you want to run multiple local registries to separate areas of concern, you can customize the registry's port settings. This example runs the registry on port 5001 and also names it `registry-test`. Remember, the first part of the `-p` value is the host port and the second part is the port within the container. Within the container, the registry listens on port `5000` by default. ```bash $ docker run -d \ -p 5001:5000 \ --name registry-test \ registry:2 ``` If you want to change the port the registry listens on within the container, you can use the environment variable `REGISTRY_HTTP_ADDR` to change it. This command causes the registry to listen on port 5001 within the container: ```bash $ docker run -d \ -e REGISTRY_HTTP_ADDR=0.0.0.0:5001 \ -p 5001:5001 \ --name registry-test \ registry:2 ``` ## Storage customization ### Customize the storage location By default, your registry data is persisted as a [docker volume](/engine/tutorials/dockervolumes.md) on the host filesystem. If you want to store your registry contents at a specific location on your host filesystem, such as if you have an SSD or SAN mounted into a particular directory, you might decide to use a bind mount instead. A bind mount is more dependent on the filesystem layout of the Docker host, but more performant in many situations. The following example bind-mounts the host directory `/mnt/registry` into the registry container at `/var/lib/registry/`. ```bash $ docker run -d \ -p 5000:5000 \ --restart=always \ --name registry \ -v /mnt/registry:/var/lib/registry \ registry:2 ``` ### Customize the storage back-end By default, the registry stores its data on the local filesystem, whether you use a bind mount or a volume. You can store the registry data in an Amazon S3 bucket, Google Cloud Platform, or on another storage back-end by using [storage drivers](./storage-drivers/index.md). For more information, see [storage configuration options](./configuration.md#storage). ## Run an externally-accessible registry Running a registry only accessible on `localhost` has limited usefulness. In order to make your registry accessible to external hosts, you must first secure it using TLS. This example is extended in [Run a registry as a service](#run-a-registry-as-a-service) below. ### Get a certificate These examples assume the following: - Your registry will be accessible on `https://myregistry.domain.com/`. - Your DNS, routing, and firewall settings allow access to the registry's host on port 5000. - You have already obtained a certificate from a certificate authority (CA). If you have been issued an _intermediate_ certificate instead, see [use an intermediate certificate](#use-an-intermediate-certificate). 1. Create a `certs` directory. ```bash $ mkdir -p certs ``` Copy the `.crt` and `.key` files from the CA into the `certs` directory. The following steps assume that the files are named `domain.crt` and `domain.key`. 2. Stop the registry if it is currently running. ```bash $ docker stop registry ``` 3. Restart the registry, directing it to use the TLS certificate. This command bind-mounts the `certs/` directory into the container at `/certs/`, and sets environment variables that tell the container where to find the `domain.crt` and `domain.key` file. The registry runs on port 80. ```bash $ docker run -d \ --restart=always \ --name registry \ -v `pwd`/certs:/certs \ -e REGISTRY_HTTP_ADDR=0.0.0.0:80 \ -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/domain.crt \ -e REGISTRY_HTTP_TLS_KEY=/certs/domain.key \ -p 80:80 \ registry:2 ``` 4. Docker clients can now pull from and push to your registry using its external address. The following commands demonstrate this: ```bash $ docker pull ubuntu:16.04 $ docker tag ubuntu:16.04 myregistrydomain.com/my-ubuntu $ docker push myregistrydomain.com/my-ubuntu $ docker pull myregistrydomain.com/my-ubuntu ``` #### Use an intermediate certificate A certificate issuer may supply you with an *intermediate* certificate. In this case, you must concatenate your certificate with the intermediate certificate to form a *certificate bundle*. You can do this using the `cat` command: ```bash cat domain.crt intermediate-certificates.pem > certs/domain.crt ``` You can use the certificate bundle just as you use the `domain.crt` file in the previous example. ### Support for Let's Encrypt The registry supports using Let's Encrypt to automatically obtain a browser-trusted certificate. For more information on Let's Encrypt, see [https://letsencrypt.org/how-it-works/](https://letsencrypt.org/how-it-works/) and the relevant section of the [registry configuration](configuration.md#letsencrypt). ### Use an insecure registry (testing only) It is possible to use a self-signed certificate, or to use our registry insecurely. Unless you have set up verification for your self-signed certificate, this is for testing only. See [run an insecure registry](insecure.md). ## Run the registry as a service [Swarm services](/engine/swarm/services.md) provide several advantages over standalone containers. They use a declarative model, which means that you define the desired state and Docker works to keep your service in that state. Services provide automatic load balancing scaling, and the ability to control the distribution of your service, among other advantages. Services also allow you to store sensitive data such as TLS certificates in [secrets](/engine/swarm/secrets.md). The storage back-end you use determines whether you use a fully scaled service or a service with either only a single node or a node constraint. - If you use a distributed storage driver, such as Amazon S3, you can use a fully replicated service. Each worker can write to the storage back-end without causing write conflicts. - If you use a local bind mount or volume, each worker node will write to its own storage location, which means that each registry will contain a different data set. You can solve this problem by using a single-replica service and a node constraint to ensure that only a single worker is writing to the bind mount. The following example starts a registry as a single-replica service, which is accessible on any swarm node on port 80. It assumes you are using the same TLS certificates as in the previous examples. First, save the TLS certificate and key as secrets: ```bash $ docker secret create domain.crt certs/domain.crt $ docker secret create domain.key certs/domain.key ``` Next, add a label to the node where you want to run the registry. To get the node's name, use `docker node ls`. Substitute your node's name for `node1` below. ```bash $ docker node update --label-add registry=true node1 ``` Next, create the service, granting it access to the two secrets and constraining it to only run on nodes with the label `registry=true`. Besides the constraint, you are also specifying that only a single replica should run at a time. The example bind-mounts `/mnt/registry` on the swarm node to `/var/lib/registry/` within the container. By default, secrets are mounted into a service at `/run/secrets/`. ```bash $ docker service create \ --name registry \ --secret domain.crt \ --secret domain.key \ --label registry=true \ -v /mnt/registry:/var/lib/registry \ -e REGISTRY_HTTP_ADDR=0.0.0.0:80 \ -e REGISTRY_HTTP_TLS_CERTIFICATE=/run/secrets/domain.crt \ -e REGISTRY_HTTP_TLS_KEY=/run/secrets/domain.key \ -p 80:80 \ --replicas 1 \ registry:2 ``` You can access the service on port 80 of any swarm node. Docker sends the requests to the node which is running the service. ## Load Balancing Considerations One may want to use a load balancer to distribute load, terminate TLS or provide high availability. While a full load balancing setup is outside the scope of this document, there are a few considerations that can make the process smoother. The most important aspect is that a load balanced cluster of registries must share the same resources. For the current version of the registry, this means the following must be the same: - Storage Driver - HTTP Secret - Redis Cache (if configured) If any of these are different, the registry will have trouble serving requests. As an example, if you're using the filesystem driver, all registry instances must have access to the same filesystem root, which means they should be in the same machine. For other drivers, such as s3 or azure, they should be accessing the same resource, and will likely share an identical configuration. The _HTTP Secret_ coordinates uploads, so also must be the same across instances. Configuring different redis instances will work (at the time of writing), but will not be optimal if the instances are not shared, causing more requests to be directed to the backend. ### Important/Required HTTP-Headers Getting the headers correct is very important. For all responses to any request under the "/v2/" url space, the `Docker-Distribution-API-Version` header should be set to the value "registry/2.0", even for a 4xx response. This header allows the docker engine to quickly resolve authentication realms and fallback to version 1 registries, if necessary. Confirming this is setup correctly can help avoid problems with fallback. In the same train of thought, you must make sure you are properly sending the `X-Forwarded-Proto`, `X-Forwarded-For`, and `Host` headers to their "client-side" values. Failure to do so usually makes the registry issue redirects to internal hostnames or downgrading from https to http. A properly secured registry should return 401 when the "/v2/" endpoint is hit without credentials. The response should include a `WWW-Authenticate` challenge, providing guidance on how to authenticate, such as with basic auth or a token service. If the load balancer has health checks, it is recommended to configure it to consider a 401 response as healthy and any other as down. This will secure your registry by ensuring that configuration problems with authentication don't accidentally expose an unprotected registry. If you're using a less sophisticated load balancer, such as Amazon's Elastic Load Balancer, that doesn't allow one to change the healthy response code, health checks can be directed at "/", which will always return a `200 OK` response. ## Restricting access Except for registries running on secure local networks, registries should always implement access restrictions. ### Native basic auth The simplest way to achieve access restriction is through basic authentication (this is very similar to other web servers' basic authentication mechanism). This example uses native basic authentication using `htpasswd` to store the secrets. > **Warning**: > You **cannot** use authentication with authentication schemes that send > credentials as clear text. You must > [configure TLS first](deploying.md#running-a-domain-registry) for > authentication to work. {:.warning} 1. Create a password file with one entry for the user `testuser`, with password `testpassword`: ```bash $ mkdir auth $ docker run \ --entrypoint htpasswd \ registry:2 -Bbn testuser testpassword > auth/htpasswd ``` 2. Stop the registry. ```bash $ docker stop registry ``` 3. Start the registry with basic authentication. ```bash $ docker run -d \ -p 5000:5000 \ --restart=always \ --name registry \ -v `pwd`/auth:/auth \ -e "REGISTRY_AUTH=htpasswd" \ -e "REGISTRY_AUTH_HTPASSWD_REALM=Registry Realm" \ -e REGISTRY_AUTH_HTPASSWD_PATH=/auth/htpasswd \ -v `pwd`/certs:/certs \ -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/domain.crt \ -e REGISTRY_HTTP_TLS_KEY=/certs/domain.key \ registry:2 ``` 4. Try to pull an image from the registry, or push an image to the registry. These commands will fail. 5. Log in to the registry. ```bash $ docker login myregistrydomain.com:5000 ``` Provide the username and password from the first step. Test that you can now pull an image from the registry or push an image to the registry.. > **X509 errors**: X509 errors usually indicate that you are attempting to use > a self-signed certificate without configuring the Docker daemon correctly. > See [run an insecure registry](insecure.md). ### More advanced authentication You may want to leverage more advanced basic auth implementations by using a proxy in front of the registry. See the [recipes list](recipes/index.md). The registry also supports delegated authentiation, which redirects users to a specific, trusted token server. This approach is more complicated to set up, and only makes sense if you need to fully configure ACLs and need more control over the registry's integration into your global authorization and authentication systems. Refer to the following [background information](spec/auth/token.md) and [configuration information here](configuration.md#auth). This approach requires you to implement your own authentication system or leverage a third-party implementation. ## Deploy your registry using a Compose file If your registry invocation is advanced, it may be easier to use a Docker compose file to deploy it, rather than relying on a specific `docker run` invocation. Use the following example `docker-compose-yml` as a template. ```yaml registry: restart: always image: registry:2 ports: - 5000:5000 environment: REGISTRY_HTTP_TLS_CERTIFICATE: /certs/domain.crt REGISTRY_HTTP_TLS_KEY: /certs/domain.key REGISTRY_AUTH: htpasswd REGISTRY_AUTH_HTPASSWD_PATH: /auth/htpasswd REGISTRY_AUTH_HTPASSWD_REALM: Registry Realm volumes: - /path/data:/var/lib/registry - /path/certs:/certs - /path/auth:/auth ``` Replace `/path` with the directory which contains the `certs/` and `auth/` directories. {:.warning} Start your registry by issuing the following command in the directory containing the `docker-compose.yml` file: ```bash $ docker-compose up -d ``` ## Considerations for air-gapped registries You can run a registry in an environment with no internet connectivity. However, if you rely on any images which are not local, you need to consider the following: - You may need to build your local registry's data volume on a connected host where you can run `docker pull` to get any images which are available remotely, and then migrate the registry's data volume to the air-gapped network. - Certain images, such as the official Microsoft Windows base images, are not distributable. This means that when you push an image based on one of these images to your private registry, the non-distributable layers are **not** pushed, but are always fetched from their authorized location. This is fine for internet-connected hosts, but will not work in an air-gapped set-up. In Docker 17.06 and higher, you can configure the Docker daemon to allow pushing non-distributable layers to private registries, in this scenario. **This is only useful in air-gapped set-ups in the presence of non-distributable images, or in extremely bandwidth-limited situations.** You are responsible for ensuring that you are in compliance with the terms of use for non-distributable layers. 1. Edit the `daemon.json` file, which is located in `/etc/docker/` on Linux hosts and `C:\ProgramData\docker\config\daemon.json` on Windows Server. Assuming the file was previously empty, add the following contents: ```json { "allow-nondistributable-artifacts": ["myregistrydomain.com:5000"] } ``` The value is an array of registry addresses, separated by commas. Save and exit the file. 2. Restart Docker. 3. Restart the registry if it does not start automatically. 4. When you push images to the registries in the list, their non-distributable layers will be pushed to the registry. > **Warning**: Non-distributable artifacts typically have restrictions on > how and where they can be distributed and shared. Only use this feature > to push artifacts to private registries and ensure that you are in > compliance with any terms that cover redistributing non-distributable > artifacts. ## Next steps You will find more specific and advanced information in the following sections: - [Configuration reference](configuration.md) - [Working with notifications](notifications.md) - [Advanced "recipes"](recipes/index.md) - [Registry API](spec/api.md) - [Storage driver model](storage-drivers/index.md) - [Token authentication](spec/auth/token.md)