[#1337] config: Move rebuild_worker_count to shard section

This makes it simple to limit performance degradation for every shard
because of rebuild.

Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>

cmd/frostfs-cli/modules/control/shards.go

@@ -19,6 +19,7 @@ func initControlShardsCmd() {
 	shardsCmd.AddCommand(doctorCmd)
 	shardsCmd.AddCommand(writecacheShardCmd)
 	shardsCmd.AddCommand(shardsDetachCmd)
+	shardsCmd.AddCommand(shardsRebuildCmd)
 
 	initControlShardsListCmd()
 	initControlSetShardModeCmd()

cmd/frostfs-node/config.go

@@ -109,7 +109,6 @@ type applicationConfiguration struct {
 		shardPoolSize  uint32
 		shards         []shardCfg
 		lowMem         bool
-		rebuildWorkers uint32
 	}
 
 	// if need to run node in compatibility with other versions mode
@@ -127,6 +126,8 @@ type shardCfg struct {
 	refillMetabaseWorkersCount int
 	mode                       shardmode.Mode
 
+	rebuildWorkersCount uint32
+
 	metaCfg struct {
 		path          string
 		perm          fs.FileMode
@@ -230,7 +231,6 @@ func (a *applicationConfiguration) readConfig(c *config.Config) error {
 	a.EngineCfg.errorThreshold = engineconfig.ShardErrorThreshold(c)
 	a.EngineCfg.shardPoolSize = engineconfig.ShardPoolSize(c)
 	a.EngineCfg.lowMem = engineconfig.EngineLowMemoryConsumption(c)
-	a.EngineCfg.rebuildWorkers = engineconfig.EngineRebuildWorkersCount(c)
 
 	return engineconfig.IterateShards(c, false, func(sc *shardconfig.Config) error { return a.updateShardConfig(c, sc) })
 }
@@ -240,6 +240,7 @@ func (a *applicationConfiguration) updateShardConfig(c *config.Config, oldConfig
 
 	newConfig.refillMetabase = oldConfig.RefillMetabase()
 	newConfig.refillMetabaseWorkersCount = oldConfig.RefillMetabaseWorkersCount()
+	newConfig.rebuildWorkersCount = oldConfig.RebuildWorkerCount()
 	newConfig.mode = oldConfig.Mode()
 	newConfig.compress = oldConfig.Compress()
 	newConfig.estimateCompressibility = oldConfig.EstimateCompressibility()
@@ -835,7 +836,6 @@ func (c *cfg) engineOpts() []engine.Option {
 		engine.WithErrorThreshold(c.EngineCfg.errorThreshold),
 		engine.WithLogger(c.log),
 		engine.WithLowMemoryConsumption(c.EngineCfg.lowMem),
-		engine.WithRebuildWorkersCount(c.EngineCfg.rebuildWorkers),
 	)
 
 	if c.metricsCollector != nil {
@@ -998,6 +998,7 @@ func (c *cfg) getShardOpts(ctx context.Context, shCfg shardCfg) shardOptsWithID
 		shard.WithLogger(c.log),
 		shard.WithRefillMetabase(shCfg.refillMetabase),
 		shard.WithRefillMetabaseWorkersCount(shCfg.refillMetabaseWorkersCount),
+		shard.WithRebuildWorkersCount(shCfg.rebuildWorkersCount),
 		shard.WithMode(shCfg.mode),
 		shard.WithBlobStorOptions(blobstoreOpts...),
 		shard.WithMetaBaseOptions(mbOptions...),

cmd/frostfs-node/config/engine/config.go

@@ -15,9 +15,6 @@ const (
 	// ShardPoolSizeDefault is a default value of routine pool size per-shard to
 	// process object PUT operations in a storage engine.
 	ShardPoolSizeDefault = 20
-	// RebuildWorkersCountDefault is a default value of the workers count to
-	// process storage rebuild operations in a storage engine.
-	RebuildWorkersCountDefault = 100
 )
 
 // ErrNoShardConfigured is returned when at least 1 shard is required but none are found.
@@ -91,11 +88,3 @@ func ShardErrorThreshold(c *config.Config) uint32 {
 func EngineLowMemoryConsumption(c *config.Config) bool {
 	return config.BoolSafe(c.Sub(subsection), "low_mem")
 }
-
-// EngineRebuildWorkersCount returns value of "rebuild_workers_count" config parmeter from "storage" section.
-func EngineRebuildWorkersCount(c *config.Config) uint32 {
-	if v := config.Uint32Safe(c.Sub(subsection), "rebuild_workers_count"); v > 0 {
-		return v
-	}
-	return RebuildWorkersCountDefault
-}

cmd/frostfs-node/config/engine/config_test.go

@@ -39,7 +39,6 @@ func TestEngineSection(t *testing.T) {
 		require.EqualValues(t, 0, engineconfig.ShardErrorThreshold(empty))
 		require.EqualValues(t, engineconfig.ShardPoolSizeDefault, engineconfig.ShardPoolSize(empty))
 		require.EqualValues(t, mode.ReadWrite, shardconfig.From(empty).Mode())
-		require.EqualValues(t, engineconfig.RebuildWorkersCountDefault, engineconfig.EngineRebuildWorkersCount(empty))
 	})
 
 	const path = "../../../../config/example/node"
@@ -49,7 +48,6 @@ func TestEngineSection(t *testing.T) {
 
 		require.EqualValues(t, 100, engineconfig.ShardErrorThreshold(c))
 		require.EqualValues(t, 15, engineconfig.ShardPoolSize(c))
-		require.EqualValues(t, uint32(1000), engineconfig.EngineRebuildWorkersCount(c))
 
 		err := engineconfig.IterateShards(c, true, func(sc *shardconfig.Config) error {
 			defer func() {
@@ -121,6 +119,7 @@ func TestEngineSection(t *testing.T) {
 				require.Equal(t, false, sc.RefillMetabase())
 				require.Equal(t, mode.ReadOnly, sc.Mode())
 				require.Equal(t, 100, sc.RefillMetabaseWorkersCount())
+				require.Equal(t, uint32(1000), sc.RebuildWorkerCount())
 			case 1:
 				require.Equal(t, "tmp/1/blob/pilorama.db", pl.Path())
 				require.Equal(t, fs.FileMode(0o644), pl.Perm())
@@ -176,6 +175,7 @@ func TestEngineSection(t *testing.T) {
 				require.Equal(t, true, sc.RefillMetabase())
 				require.Equal(t, mode.ReadWrite, sc.Mode())
 				require.Equal(t, shardconfig.RefillMetabaseWorkersCountDefault, sc.RefillMetabaseWorkersCount())
+				require.Equal(t, uint32(shardconfig.RebuildWorkersCountDefault), sc.RebuildWorkerCount())
 			}
 			return nil
 		})

cmd/frostfs-node/config/engine/shard/config.go

@@ -19,6 +19,7 @@ const (
 	SmallSizeLimitDefault                   = 1 << 20
 	EstimateCompressibilityThresholdDefault = 0.1
 	RefillMetabaseWorkersCountDefault       = 500
+	RebuildWorkersCountDefault              = 5
 )
 
 // From wraps config section into Config.
@@ -149,6 +150,20 @@ func (x *Config) RefillMetabaseWorkersCount() int {
 	return RefillMetabaseWorkersCountDefault
 }
 
+// RebuildWorkersCount returns the value of "resync_metabase_worker_count" config parameter.
+//
+// Returns RebuildWorkersCountDefault if the value is not a positive number.
+func (x *Config) RebuildWorkerCount() uint32 {
+	v := config.Uint32Safe(
+		(*config.Config)(x),
+		"rebuild_worker_count",
+	)
+	if v > 0 {
+		return v
+	}
+	return RebuildWorkersCountDefault
+}
+
 // Mode return the value of "mode" config parameter.
 //
 // Panics if read the value is not one of predefined

config/example/node.env

@@ -90,11 +90,11 @@ FROSTFS_OBJECT_DELETE_TOMBSTONE_LIFETIME=10
 # Storage engine section
 FROSTFS_STORAGE_SHARD_POOL_SIZE=15
 FROSTFS_STORAGE_SHARD_RO_ERROR_THRESHOLD=100
-FROSTFS_STORAGE_REBUILD_WORKERS_COUNT=1000
 ## 0 shard
 ### Flag to refill Metabase from BlobStor
 FROSTFS_STORAGE_SHARD_0_RESYNC_METABASE=false
 FROSTFS_STORAGE_SHARD_0_RESYNC_METABASE_WORKER_COUNT=100
+FROSTFS_STORAGE_SHARD_0_REBUILD_WORKER_COUNT=1000
 ### Flag to set shard mode
 FROSTFS_STORAGE_SHARD_0_MODE=read-only
 ### Write cache config

config/example/node.json

@@ -135,12 +135,12 @@
   "storage": {
     "shard_pool_size": 15,
     "shard_ro_error_threshold": 100,
-    "rebuild_workers_count": 1000,
     "shard": {
       "0": {
         "mode": "read-only",
         "resync_metabase": false,
         "resync_metabase_worker_count": 100,
+        "rebuild_worker_count": 1000,
         "writecache": {
           "enabled": false,
           "no_sync": true,

config/example/node.yaml

@@ -117,7 +117,6 @@ storage:
   # note: shard configuration can be omitted for relay node (see `node.relay`)
   shard_pool_size: 15 # size of per-shard worker pools used for PUT operations
   shard_ro_error_threshold: 100 # amount of errors to occur before shard is made read-only (default: 0, ignore errors)
-  rebuild_workers_count: 1000 # count of rebuild storage concurrent workers
 
   shard:
     default: # section with the default shard parameters
@@ -165,6 +164,7 @@ storage:
         # disabled (do not work with the shard, allows to not remove it from the config)
       resync_metabase: false  # sync metabase with blobstor on start, expensive, leave false until complete understanding
       resync_metabase_worker_count: 100
+      rebuild_worker_count: 1000 # count of rebuild storage concurrent workers
 
       writecache:
         enabled: false

docs/storage-node-configuration.md

@@ -189,6 +189,7 @@ The following table describes configuration for each shard.
 | `mode`                                           | `string`                                    | `read-write`  | Shard Mode.<br/>Possible values:  `read-write`, `read-only`, `degraded`, `degraded-read-only`, `disabled`                                                                                                         |
 | `resync_metabase`                                | `bool`                                      | `false`       | Flag to enable metabase resync on start.                                                                                                                                                                          |
 | `resync_metabase_worker_count`                   | `int`                                       | `1000`        | Count of concurrent workers to resync metabase.                                                                                                                                                                   |
+| `rebuild_worker_count`                           | `int`                                       | `5`           | Count of concurrent workers to rebuild blobstore.                                                                                                                                                                 |
 | `writecache`                                     | [Writecache config](#writecache-subsection) |               | Write-cache configuration.                                                                                                                                                                                        |
 | `metabase`                                       | [Metabase config](#metabase-subsection)     |               | Metabase configuration.                                                                                                                                                                                           |
 | `blobstor`                                       | [Blobstor config](#blobstor-subsection)     |               | Blobstor configuration.                                                                                                                                                                                           |

pkg/local_object_storage/engine/engine.go

@@ -40,7 +40,6 @@ type StorageEngine struct {
 		err error
 	}
 	evacuateLimiter *evacuationLimiter
-	rebuildLimiter  *rebuildLimiter
 }
 
 type shardWrapper struct {
@@ -213,16 +212,13 @@ type cfg struct {
 
 	lowMem bool
 
-	rebuildWorkersCount uint32
-
 	containerSource atomic.Pointer[containerSource]
 }
 
 func defaultCfg() *cfg {
 	res := &cfg{
-		log:                 &logger.Logger{Logger: zap.L()},
+		log:           &logger.Logger{Logger: zap.L()},
-		shardPoolSize:       20,
+		shardPoolSize: 20,
-		rebuildWorkersCount: 100,
 	}
 	res.containerSource.Store(&containerSource{})
 	return res
@@ -243,7 +239,6 @@ func New(opts ...Option) *StorageEngine {
 		closeCh:         make(chan struct{}),
 		setModeCh:       make(chan setModeRequest),
 		evacuateLimiter: &evacuationLimiter{},
-		rebuildLimiter:  newRebuildLimiter(c.rebuildWorkersCount),
 	}
 }
 
@@ -282,13 +277,6 @@ func WithLowMemoryConsumption(lowMemCons bool) Option {
 	}
 }
 
-// WithRebuildWorkersCount returns an option to set the count of concurrent rebuild workers.
-func WithRebuildWorkersCount(count uint32) Option {
-	return func(c *cfg) {
-		c.rebuildWorkersCount = count
-	}
-}
-
 // SetContainerSource sets container source.
 func (e *StorageEngine) SetContainerSource(cs container.Source) {
 	e.containerSource.Store(&containerSource{cs: cs})

pkg/local_object_storage/engine/rebuild.go

@@ -41,7 +41,7 @@ func (e *StorageEngine) Rebuild(ctx context.Context, prm RebuildPrm) (RebuildRes
 	}
 	resGuard := &sync.Mutex{}
 
-	limiter := newRebuildLimiter(prm.ConcurrencyLimit)
+	limiter := shard.NewRebuildLimiter(prm.ConcurrencyLimit)
 
 	eg, egCtx := errgroup.WithContext(ctx)
 	for _, shardID := range prm.ShardIDs {

pkg/local_object_storage/engine/rebuild_limiter.go

@@ -1,26 +0,0 @@
-package engine
-
-import "context"
-
-type rebuildLimiter struct {
-	semaphore chan struct{}
-}
-
-func newRebuildLimiter(workersCount uint32) *rebuildLimiter {
-	return &rebuildLimiter{
-		semaphore: make(chan struct{}, workersCount),
-	}
-}
-
-func (l *rebuildLimiter) AcquireWorkSlot(ctx context.Context) error {
-	select {
-	case l.semaphore <- struct{}{}:
-		return nil
-	case <-ctx.Done():
-		return ctx.Err()
-	}
-}
-
-func (l *rebuildLimiter) ReleaseWorkSlot() {
-	<-l.semaphore
-}

pkg/local_object_storage/engine/shards.go

@@ -133,7 +133,6 @@ func (e *StorageEngine) createShard(_ context.Context, opts []shard.Option) (*sh
 		shard.WithExpiredLocksCallback(e.processExpiredLocks),
 		shard.WithDeletedLockCallback(e.processDeletedLocks),
 		shard.WithReportErrorFunc(e.reportShardErrorBackground),
-		shard.WithRebuildWorkerLimiter(e.rebuildLimiter),
 		shard.WithZeroSizeCallback(e.processZeroSizeContainers),
 		shard.WithZeroCountCallback(e.processZeroCountContainers),
 	)...)

pkg/local_object_storage/shard/control.go

@@ -129,7 +129,7 @@ func (s *Shard) Init(ctx context.Context) error {
 
 	s.gc.init(ctx)
 
-	s.rb = newRebuilder(s.rebuildLimiter)
+	s.rb = newRebuilder(NewRebuildLimiter(s.rebuildWorkersCount))
 	if !m.NoMetabase() {
 		s.rb.Start(ctx, s.blobStor, s.metaBase, s.log)
 	}

pkg/local_object_storage/shard/rebuild.go

@@ -26,7 +26,7 @@ type rebuildLimiter struct {
 	semaphore chan struct{}
 }
 
-func newRebuildLimiter(workersCount uint32) *rebuildLimiter {
+func NewRebuildLimiter(workersCount uint32) RebuildWorkerLimiter {
 	return &rebuildLimiter{
 		semaphore: make(chan struct{}, workersCount),
 	}

pkg/local_object_storage/shard/shard.go

@@ -138,7 +138,7 @@ type cfg struct {
 
 	reportErrorFunc func(selfID string, message string, err error)
 
-	rebuildLimiter RebuildWorkerLimiter
+	rebuildWorkersCount uint32
 }
 
 func defaultCfg() *cfg {
@@ -147,7 +147,7 @@ func defaultCfg() *cfg {
 		log:                         &logger.Logger{Logger: zap.L()},
 		gcCfg:                       defaultGCCfg(),
 		reportErrorFunc:             func(string, string, error) {},
-		rebuildLimiter:              newRebuildLimiter(1),
+		rebuildWorkersCount:         1,
 		zeroSizeContainersCallback:  func(context.Context, []cid.ID) {},
 		zeroCountContainersCallback: func(context.Context, []cid.ID) {},
 	}
@@ -380,11 +380,11 @@ func WithExpiredCollectorWorkerCount(count int) Option {
 	}
 }
 
-// WithRebuildWorkerLimiter return option to set concurrent
+// WithRebuildWorkersCount return option to set concurrent
 // workers count of storage rebuild operation.
-func WithRebuildWorkerLimiter(l RebuildWorkerLimiter) Option {
+func WithRebuildWorkersCount(count uint32) Option {
 	return func(c *cfg) {
-		c.rebuildLimiter = l
+		c.rebuildWorkersCount = count
 	}
 }