diff --git a/docs/authmate.md b/docs/authmate.md
index da45a4d..139b23c 100644
--- a/docs/authmate.md
+++ b/docs/authmate.md
@@ -4,22 +4,22 @@ Authmate is a tool to create gateway AWS credentials. AWS users
 are authenticated with access key IDs and secrets, while NeoFS users are
 authenticated with key pairs. To complicate things further we have S3 gateway
 that usually acts on behalf of some user, but user doesn't necessarily want to
-give his keys to the gateway.
+give their keys to the gateway.
 
-To solve this we use NeoFS bearer tokens that are signed by the owner (NeoFS
+To solve this, we use NeoFS bearer tokens that are signed by the owner (NeoFS
 "user") and that can implement any kind of policy for NeoFS requests allowed
-using this token. But tokens can't be used directly as AWS credentials, thus
-they're stored on NeoFS as regular objects and access key ID is just an
+using this token. However, tokens can't be used as AWS credentials directly, thus
+they're stored on NeoFS as regular objects, and access key ID is just an
 address of this object while secret is generated randomly.
 
 Tokens are not stored on NeoFS in plaintext, they're encrypted with a set of
-gateway keys. So in order for gateway to be able to successfully extract bearer
-token the object needs to be stored in a container available for the gateway
-to read and it needs to be encrypted with this gateway's key (among others
+gateway keys. So in order for a gateway to be able to successfully extract bearer
+token, the object needs to be stored in a container available for the gateway
+to read, and it needs to be encrypted with this gateway's key (among others
 potentially).
 
 ## Variables
-Authmate support the following variables to decrypt wallets provided by `--wallet` and `--gate-wallet`
+Authmate supports the following variables to decrypt wallets provided by `--wallet` and `--gate-wallet`
 parameters respectevely:
 * `AUTHMATE_WALLET_PASSPHRASE`
 * `AUTHMATE_WALLET_GATE_PASSPHRASE`
@@ -84,20 +84,20 @@ NhLQpDnerpviUWDF77j5qyjFgavCmasJ4p (simple signature contract):
 
 ## Issuance of a secret
 
-To issue a secret means to create a Bearer and  (optionally) Session tokens and
+To issue a secret means to create a Bearer and (optionally) Session tokens and
 put them as an object into a container on the NeoFS network.
 
-By default, the tool creates the container with a name `auth-container` and ACL 
+By default, the tool creates a container with a name `auth-container` and ACL 
 0x3c8c8cce (all operations are forbidden for `OTHERS` and `BEARER` user groups, 
 except for `GET`). 
 
-Also, you can put the tokens into existing container via `--container-id` 
+Also, you can put the tokens into an existing container via `--container-id` 
 parameter, but this way is **not recommended**.
 
 The tokens are encrypted by a set of gateway keys, so you need to pass them as well.
 
-Creation of the bearer token is mandatory, and creation of the session token is
-optional. If you want to add the session token you need to add a parameter
+Creation of the bearer token is mandatory, while creation of the session token is
+optional. If you want to add the session token, you need to add a parameter
 `create-session-token`.
 
 Rules for bearer token can be set via param `bearer-rules` (json-string and file path allowed), if it is not set,
@@ -128,7 +128,7 @@ it will be auto-generated with values:
 }
 ```
 
-Rules for session token can be set via param `session-rules` (json-string and file path allowed), default value is:
+Rules for a session token can be set via param `session-rules` (json-string and file path allowed), the default value is:
 ```
 {
     "verb": "PUT",
@@ -137,8 +137,8 @@ Rules for session token can be set via param `session-rules` (json-string and fi
 }
 ```
 
-If `session-rules` is set, but `create-session-token` is not, the session
-token will not be created.
+If `session-rules` are set, but `create-session-token` is not, no session
+token will be created.
 
 Rules for mapping of `LocationConstraint` ([aws spec](https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateBucket.html#API_CreateBucket_RequestBody)) 
 to `PlacementPolicy` ([neofs spec](https://github.com/nspcc-dev/neofs-spec/blob/master/01-arch/02-policy.md)) 
@@ -179,9 +179,9 @@ the secret. Format of access_key_id: `%cid0%oid`, where 0(zero) is a delimiter.
 
 ## Obtainment of a secret access key
 
-You can get a secret access key associated with access key ID by obtaining a
-secret stored on the NeoFS network. Here example of providing one password (for `wallet.json`) via env variable 
-and other (for `gate-wallet.json`) interactively:
+You can get a secret access key associated with an access key ID by obtaining a
+secret stored on the NeoFS network. Here is an example of providing one password (for `wallet.json`) via env variable 
+and the other (for `gate-wallet.json`) interactively:
 
 ```
  $ AUTHMATE_WALLET_PASSPHRASE=some-pwd \
diff --git a/docs/aws_cli.md b/docs/aws_cli.md
index 229f3f8..8f56d93 100644
--- a/docs/aws_cli.md
+++ b/docs/aws_cli.md
@@ -4,7 +4,7 @@
 
 ### Credentials
 
-To configure basic settings that the AWS CLI uses to interact with the Gateway, do the following steps:
+To configure basic settings that the AWS CLI uses to interact with the Gateway, follow steps below:
 
 1. issue a secret with neofs-authmate tool (see [NeoFS Authmate] (#neofs-authmate))
 2. execute the command
@@ -22,13 +22,13 @@ Default output format [none]: json
 
 ## Basic usage
 
-> **_NOTE:_** To specify IP and port of the gate, append `--endpoint-url https://%IP:%PORT` to your commands.
+> **_NOTE:_** To specify the IP and the port of the gate, append `--endpoint-url https://%IP:%PORT` to your commands.
 
 ### Bucket
 
 #### Obtainment of a list of buckets 
 
-To view the list of the buckets in the NeoFS node, to which the gateway is connected, enter the command:
+To view the list of the buckets in the NeoFS node, to which the gateway is connected, enter the following command:
 ```
 $ aws s3 ls 
 ```
@@ -37,7 +37,7 @@ $ aws s3 ls
 
 At this moment, the gateway supports only canned ACL and doesn't support the setting of location constraints.
 
-To create a bucket, run the command:
+To create a bucket, run the following command:
 ```
 $ aws s3api create-bucket --bucket %BUCKET_NAME --acl %ACL
 ```
@@ -62,15 +62,15 @@ $ aws s3api list-objects --bucket %BUCKET_NAME
 
 #### Upload of a file
 
-To upload the file into a bucket in the NeoFS network, run the following command:
+To upload a file into a bucket in the NeoFS network, run the following command:
 ```
 $ aws s3api put-object --bucket %BUCKET_NAME --key %OBJECT_KEY --body  %FILEPATH
 ```
-where %OBJECT_KEY is a filename of an object in NeoFS
+where %OBJECT_KEY is the filename of an object in NeoFS
 
 #### Upload of a dir
 
-To upload the dir into a bucket in the NeoFS network, run the following command:
+To upload a dir into a bucket in the NeoFS network, run the following command:
 
 ```
 $ aws s3 sync %DIRPATH s3://%BUCKET_NAME 
@@ -78,15 +78,15 @@ $ aws s3 sync %DIRPATH s3://%BUCKET_NAME
 
 #### Download of a file
 
-To download the file from a bucket in the NeoFS Network, execute:
+To download a file from a bucket in the NeoFS Network, execute:
 ```
 $ aws s3api get-object --bucket  %BUCKET_NAME --key %OBJECT_KEY %OUTFILE
 ```
 
-where %OUTFILE is a file to store object content.
+where %OUTFILE is the file to store object content.
 
 #### Deletion of a file
-To delete the file:
+To delete a file:
 ```
 $ aws s3api delete-object --bucket %BUCKET_NAME --key %FILE_NAME
-```
\ No newline at end of file
+```
diff --git a/docs/configuration.md b/docs/configuration.md
index 2aaee94..44934fc 100644
--- a/docs/configuration.md
+++ b/docs/configuration.md
@@ -1,39 +1,39 @@
 # Configuration
 
-In general, everything available as CLI parameter can also be specified via
+Actually, everything available as a CLI parameter can also be specified via
 environment variables, so they're not specifically mentioned in most cases
 (see `--help` also). If you prefer a config file you can use it in yaml format.
 
 ## Nodes and weights
 
-You can specify multiple `-p` options to add more NeoFS nodes, this will make
-gateway spread requests equally among them (using weight 1 for every node):
+You can specify multiple `-p` options to add more NeoFS nodes; this will make
+a gateway spread requests equally among them (using weight 1 for every node):
 
 ```
 $ neofs-s3-gw -p 192.168.130.72:8080 -p 192.168.130.71:8080
 ```
-If you want some specific load distribution proportions, use weights, but they
+If you want some specific load distribution proportions, use weights, but keep it in mind that they
 can only be specified via environment variables:
 
 ```
 $ HTTP_GW_PEERS_0_ADDRESS=192.168.130.72:8080 HTTP_GW_PEERS_0_WEIGHT=9 \
   HTTP_GW_PEERS_1_ADDRESS=192.168.130.71:8080 HTTP_GW_PEERS_1_WEIGHT=1 neofs-s3-gw
 ```
-This command will make gateway use 192.168.130.72 for 90% of requests and
-192.168.130.71 for remaining 10%.
+This command will make gateway use 192.168.130.72 for 90% of the requests and
+192.168.130.71 for the remaining 10%.
 
 ## Key
 
-Wallet (`--wallet`) is mandatory parameter. It is a path to wallet file. You can provide password to decrypt wallet
-via `S3_GW_WALLET_PASSPHRASE` variable or you will be asked to enter the password interactively. 
-You also can specify account address to use from wallet using `--address` parameter.
+Wallet (`--wallet`) is a mandatory parameter. It is a path to a wallet file. You can provide password to decrypt a wallet
+via `S3_GW_WALLET_PASSPHRASE` variable or you will be asked to enter a password interactively. 
+You can also specify an account address to use from a wallet using `--address` parameter.
 
 ## Binding and TLS
 
-Gateway binds to `0.0.0.0:8080` by default and you can change that with
+Gateway binds to `0.0.0.0:8080` by default, and you can change that with
 `--listen_address` option.
 
-It can also provide TLS interface for its users, just specify paths to key and
+It can also provide TLS interface for its users, just specify paths to the key and
 certificate files via `--tls.key_file` and `--tls.cert_file` parameters. Note
 that using these options makes gateway TLS-only, if you need to serve both TLS
 and plain text you either have to run two gateway instances or use some
@@ -50,7 +50,7 @@ $ neofs-s3-gw --listen_address 192.168.130.130:443 \
 ## Monitoring and metrics
 
 Pprof and Prometheus are integrated into the gateway, but not enabled by
-default. To enable them use `--pprof` and `--metrics` flags or
+default. To enable them, use `--pprof` and `--metrics` flags or
 `HTTP_GW_PPROF`/`HTTP_GW_METRICS` environment variables.
 
 ## Yaml file
@@ -76,26 +76,26 @@ peers:
     weight: 1
 ```
 
-To know nesting level of variable you need to cut off the prefix `S3_GW` from variable and split the rest parts by `_`.
-For example variable `S3_GW_PEERS_0_WEIGHT=1` will be transformed to:
+To know the nesting level of the variable, you need to cut off the prefix `S3_GW` from the variable and split the rest parts by `_`.
+For example, variable `S3_GW_PEERS_0_WEIGHT=1` will be transformed to:
 ```
 peers:
   0:
     weight: 1
 ```
 
-If parameter doesn't support environment variable (e.g. `--listen_address 0.0.0.0:8084`) form it is used as is:
+If a parameter doesn't support environment variable (e.g. `--listen_address 0.0.0.0:8084`) form, it is used as:
 ```
 listen_address: 0.0.0.0:8084
 ```
 
 ### Cache parameters
 
-Parameters for caches in s3-gw can be specified in .yaml config file. E.g.:
+Parameters for caches in s3-gw can be specified in a .yaml config file. E.g.:
 ```
 cache:
   lifetime: 300s
   size: 150
   list_objects_lifetime: 1m
 ```
-If invalid values are set, the gateway will use default values instead.
\ No newline at end of file
+If invalid values are set, the gateway will use default values instead.