# Wallet
# Path to wallet
S3_GW_WALLET_PATH=/path/to/wallet.json
# Account address. If omitted default one will be used.
S3_GW_WALLET_ADDRESS=NfgHwwTi3wHAS8aFAN243C5vGbkYDpqLHP
# Passphrase to decrypt wallet.
S3_GW_WALLET_PASSPHRASE=s3

# Nodes
# This configuration makes the gateway use the first node (grpc://s01.frostfs.devenv:8080)
# while it's healthy. Otherwise, gateway uses the second node (grpc://s01.frostfs.devenv:8080)
# for 10% of requests and the third node (grpc://s03.frostfs.devenv:8080) for 90% of requests.
# Until nodes with the same priority level are healthy
# nodes with other priority are not used.
# The lower the value, the higher the priority.
S3_GW_PEERS_0_ADDRESS=grpc://s01.frostfs.devenv:8080
S3_GW_PEERS_0_PRIORITY=1
S3_GW_PEERS_0_WEIGHT=1
S3_GW_PEERS_1_ADDRESS=grpc://s02.frostfs.devenv:8080
S3_GW_PEERS_1_PRIORITY=2
S3_GW_PEERS_1_WEIGHT=0.1
S3_GW_PEERS_2_ADDRESS=grpc://s03.frostfs.devenv:8080
S3_GW_PEERS_2_PRIORITY=2
S3_GW_PEERS_2_WEIGHT=0.9

# Address to listen and TLS
S3_GW_SERVER_0_ADDRESS=0.0.0.0:8080
S3_GW_SERVER_0_TLS_ENABLED=false
S3_GW_SERVER_0_TLS_CERT_FILE=/path/to/tls/cert
S3_GW_SERVER_0_TLS_KEY_FILE=/path/to/tls/key
S3_GW_SERVER_1_ADDRESS=0.0.0.0:8081
S3_GW_SERVER_1_TLS_ENABLED=true
S3_GW_SERVER_1_TLS_CERT_FILE=/path/to/tls/cert
S3_GW_SERVER_1_TLS_KEY_FILE=/path/to/tls/key

# How often to reconnect to the servers
S3_GW_RECONNECT_INTERVAL: 1m

# Domains to be able to use virtual-hosted-style access to bucket
S3_GW_LISTEN_DOMAINS="domain.com <wildcard>.domain.com"

# VHS enabled flag
S3_GW_VHS_ENABLED=false
# Header for determining whether VHS is enabled for the request
S3_GW_VHS_VHS_HEADER=X-Frostfs-S3-VHS
# Header for determining servername
S3_GW_VHS_SERVERNAME_HEADER=X-Frostfs-Servername

# Config file
S3_GW_CONFIG=/path/to/config/yaml

# Logger
S3_GW_LOGGER_LEVEL=debug
S3_GW_LOGGER_SAMPLING_ENABLED=false
S3_GW_LOGGER_SAMPLING_INITIAL=100
S3_GW_LOGGER_SAMPLING_THEREAFTER=100
S3_GW_LOGGER_SAMPLING_INTERVAL=1s

# HTTP logger
S3_GW_HTTP_LOGGING_ENABLED=false
# max body size to log
S3_GW_HTTP_LOGGING_MAX_BODY=1024
# max log size in Mb
S3_GW_HTTP_LOGGING_MAX_LOG_SIZE=20
# use log compression
S3_GW_HTTP_LOGGING_GZIP=true
# possible destination output values: filesystem path, url, "stdout", "stderr"
S3_GW_HTTP_LOGGING_DESTINATION=stdout

# RPC endpoint and order of resolving of bucket names
S3_GW_RPC_ENDPOINT=http://morph-chain.frostfs.devenv:30333/
S3_GW_RESOLVE_ORDER="nns dns"

# Metrics
S3_GW_PPROF_ENABLED=true
S3_GW_PPROF_ADDRESS=localhost:8085

S3_GW_PROMETHEUS_ENABLED=true
S3_GW_PROMETHEUS_ADDRESS=localhost:8086

# Timeout to connect to a node
S3_GW_CONNECT_TIMEOUT=10s
# Timeout for individual operations in streaming RPC.
S3_GW_STREAM_TIMEOUT=10s
# Timeout to check node health during rebalance.
S3_GW_HEALTHCHECK_TIMEOUT=15s
# Interval to check node health
S3_GW_REBALANCE_INTERVAL=60s
# The number of errors on connection after which node is considered as unhealthy
S3_GW_POOL_ERROR_THRESHOLD=100

# Limits for processing of clients' requests
S3_GW_MAX_CLIENTS_COUNT=100
# Deadline after which the gate sends error `RequestTimeout` to a client
S3_GW_MAX_CLIENTS_DEADLINE=30s

# Caching
# Cache for objects
S3_GW_CACHE_OBJECTS_LIFETIME=5m
S3_GW_CACHE_OBJECTS_SIZE=1000000
# Cache which keeps lists of objects in buckets
S3_GW_CACHE_LIST_LIFETIME=1m
S3_GW_CACHE_LIST_SIZE=100000
# Cache which keeps listing session
S3_GW_CACHE_LIST_SESSION_LIFETIME=1m
S3_GW_CACHE_LIST_SESSION_SIZE=100
# Cache which contains mapping of bucket name to bucket info
S3_GW_CACHE_BUCKETS_LIFETIME=1m
S3_GW_CACHE_BUCKETS_SIZE=1000
# Cache which contains mapping of nice name to object addresses
S3_GW_CACHE_NAMES_LIFETIME=1m
S3_GW_CACHE_NAMES_SIZE=10000
# Cache for system objects in a bucket: bucket settings etc
S3_GW_CACHE_SYSTEM_LIFETIME=5m
S3_GW_CACHE_SYSTEM_SIZE=100000
# Cache which stores access box with tokens by its address
S3_GW_CACHE_ACCESSBOX_REMOVING_CHECK_INTERVAL=5m
S3_GW_CACHE_ACCESSBOX_LIFETIME=10m
S3_GW_CACHE_ACCESSBOX_SIZE=100
# Cache which stores owner to cache operation mapping
S3_GW_CACHE_ACCESSCONTROL_LIFETIME=1m
S3_GW_CACHE_ACCESSCONTROL_SIZE=100000
# Cache which stores list of policy chains
S3_GW_CACHE_MORPH_POLICY_LIFETIME=1m
S3_GW_CACHE_MORPH_POLICY_SIZE=10000
# Cache which stores frostfsid subject info
S3_GW_CACHE_FROSTFSID_LIFETIME=1m
S3_GW_CACHE_FROSTFSID_SIZE=10000
# Cache which stores network info
S3_GW_CACHE_NETWORK_INFO_LIFETIME=1m

# Default policy of placing containers in FrostFS
# If a user sends a request `CreateBucket` and doesn't define policy for placing of a container in FrostFS, the S3 Gateway
# will put the container with default policy. It can be specified via environment variable, e.g.:
S3_GW_PLACEMENT_POLICY_DEFAULT_POLICY="REP 3"
# Region to placement policy mapping json file.
# Path to container policy mapping. The same as '--container-policy' flag for authmate
S3_GW_PLACEMENT_POLICY_REGION_MAPPING=/path/to/container/policy.json

# Name of location constraint
S3_GW_PLACEMENT_POLICY_COPIES_NUMBERS_0_LOCATION_CONSTRAINT=sample-01
# Array of copies numbers for corresponding location constraint
S3_GW_PLACEMENT_POLICY_COPIES_NUMBERS_0_VECTOR=1 2 3
# Second set of location constraint and its copies numbers
S3_GW_PLACEMENT_POLICY_COPIES_NUMBERS_1_LOCATION_CONSTRAINT=sample-02
S3_GW_PLACEMENT_POLICY_COPIES_NUMBERS_1_VECTOR=2 3 4

# CORS
# value of Access-Control-Max-Age header if this value is not set in a rule. Has an int type.
S3_GW_CORS_DEFAULT_MAX_AGE=600

# Parameters of requests to FrostFS
# Numbers of the object copies (for each replica, syntax the same as for `S3_GW_PLACEMENT_POLICY_COPIES_NUMBERS_0_VECTOR` above)
# to consider PUT to FrostFS successful.
# `0` or empty list means that object will be processed according to the container's placement policy
S3_GW_FROSTFS_SET_COPIES_NUMBER=0
# This flag enables client side object preparing.
S3_GW_FROSTFS_CLIENT_CUT=false
# Sets max buffer size for read payload in put operations.
S3_GW_FROSTFS_BUFFER_MAX_SIZE_FOR_PUT=1048576
# max attempt to make successful tree request.
# default value is 0 that means the number of attempts equals to number of nodes in pool.
S3_GW_FROSTFS_TREE_POOL_MAX_ATTEMPTS=0
# Specifies the timeout after which unhealthy client be closed during rebalancing if it will become healthy back.
S3_GW_FROSTFS_GRACEFUL_CLOSE_ON_SWITCH_TIMEOUT=10s

# List of allowed AccessKeyID prefixes
# If not set, S3 GW will accept all AccessKeyIDs
S3_GW_ALLOWED_ACCESS_KEY_ID_PREFIXES=Ck9BHsgKcnwfCTUSFm6pxhoNS4cBqgN2NQ8zVgPjqZDX 3stjWenX15YwYzczMr88gy3CQr4NYFBQ8P7keGzH5QFn

# Header to determine zone to resolve bucket name
S3_GW_RESOLVE_NAMESPACE_HEADER=X-Frostfs-Namespace
# List of container NNS zones which are allowed or restricted to resolve with HEAD request
S3_GW_RESOLVE_BUCKET_ALLOW=container
# S3_GW_RESOLVE_BUCKET_DENY=

# Enable using default xml namespace `http://s3.amazonaws.com/doc/2006-03-01/` when parse xml bodies.
S3_GW_KLUDGE_USE_DEFAULT_XMLNS=false
# Use this flag to be able to use chunked upload approach without having `aws-chunked` value in `Content-Encoding` header.
S3_GW_KLUDGE_BYPASS_CONTENT_ENCODING_CHECK_IN_CHUNKS=false
# Namespaces that should be handled as default
S3_GW_KLUDGE_DEFAULT_NAMESPACES="" "root"

S3_GW_TRACING_ENABLED=false
S3_GW_TRACING_ENDPOINT="localhost:4318"
S3_GW_TRACING_EXPORTER="otlp_grpc"
S3_GW_TRACING_TRUSTED_CA=""

S3_GW_RUNTIME_SOFT_MEMORY_LIMIT=1073741824

S3_GW_FEATURES_MD5_ENABLED=false
# Enable denying access for request that doesn't match any policy chain rules.
S3_GW_FEATURES_POLICY_DENY_BY_DEFAULT=false

# ReadTimeout is the maximum duration for reading the entire
# request, including the body. A zero or negative value means
# there will be no timeout.
S3_GW_WEB_READ_TIMEOUT=0
# ReadHeaderTimeout is the amount of time allowed to read
# request headers. The connection's read deadline is reset
# after reading the headers and the Handler can decide what
# is considered too slow for the body. If ReadHeaderTimeout
# is zero, the value of ReadTimeout is used. If both are
# zero, there is no timeout.
S3_GW_WEB_READ_HEADER_TIMEOUT=30s
# WriteTimeout is the maximum duration before timing out
# writes of the response. It is reset whenever a new
# request's header is read. Like ReadTimeout, it does not
# let Handlers make decisions on a per-request basis.
# A zero or negative value means there will be no timeout.
S3_GW_WEB_WRITE_TIMEOUT=0
# IdleTimeout is the maximum amount of time to wait for the
#	next request when keep-alives are enabled. If IdleTimeout
#	is zero, the value of ReadTimeout is used. If both are
#	zero, there is no timeout.
S3_GW_WEB_IDLE_TIMEOUT=30s

# FrostfsID contract configuration. To enable this functionality the `rpc_endpoint` param must be also set.
# FrostfsID contract hash (LE) or name in NNS.
S3_GW_FROSTFSID_CONTRACT=frostfsid.frostfs
# Enables a check to only allow requests to users registered in the FrostfsID contract.
S3_GW_FROSTFSID_VALIDATION_ENABLED=true

# Policy contract configuration. To enable this functionality the `rpc_endpoint` param must be also set.
# Policy contract hash (LE) or name in NNS.
S3_GW_POLICY_CONTRACT=policy.frostfs

# Proxy contract configuration. To enable this functionality the `rpc_endpoint` param must be also set.
# Proxy contract hash (LE) or name in NNS.
S3_GW_PROXY_CONTRACT=proxy.frostfs

# Namespaces configuration
S3_GW_NAMESPACES_CONFIG=namespaces.json

# Custom header to retrieve Source IP
S3_GW_SOURCE_IP_HEADER=Source-Ip

# Retry strategy configuration.
# Max amount of request attempts. Currently only for updating bucket settings request.
S3_GW_RETRY_MAX_ATTEMPTS=4
# Max delay before next attempt.
S3_GW_RETRY_MAX_BACKOFF=30s
# Backoff strategy. `exponential` and `constant` are allowed.
S3_GW_RETRY_STRATEGY=exponential

# Containers properties
S3_GW_CONTAINERS_CORS=AZjLTXfK4vs4ovxMic2xEJKSymMNLqdwq9JT64ASFCRj
S3_GW_CONTAINERS_LIFECYCLE=AZjLTXfK4vs4ovxMic2xEJKSymMNLqdwq9JT64ASFCRj