frostfs-s3-gw/legacy/bucket-handlers_test.go
2020-07-09 12:28:51 +03:00

839 lines
35 KiB
Go

/*
* MinIO Cloud Storage, (C) 2016, 2017, 2018 MinIO, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package legacy
import (
"bytes"
"encoding/xml"
"io/ioutil"
"net/http"
"net/http/httptest"
"strconv"
"testing"
"github.com/minio/minio/pkg/auth"
)
// Wrapper for calling RemoveBucket HTTP handler tests for both XL multiple disks and single node setup.
func TestRemoveBucketHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testRemoveBucketHandler, []string{"RemoveBucket"})
}
func testRemoveBucketHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
_, err := obj.PutObject(GlobalContext, bucketName, "test-object", mustGetPutObjReader(t, bytes.NewBuffer([]byte{}), int64(0), "", "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"), ObjectOptions{})
// if object upload fails stop the test.
if err != nil {
t.Fatalf("Error uploading object: <ERROR> %v", err)
}
// initialize httptest Recorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
// construct HTTP request for DELETE bucket.
req, err := newTestSignedRequestV4("DELETE", getBucketLocationURL("", bucketName), 0, nil, credentials.AccessKey, credentials.SecretKey, nil)
if err != nil {
t.Fatalf("Test %s: Failed to create HTTP request for RemoveBucketHandler: <ERROR> %v", instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
switch rec.Code {
case http.StatusOK, http.StatusCreated, http.StatusAccepted, http.StatusNoContent:
t.Fatalf("Test %v: expected failure, but succeeded with %v", instanceType, rec.Code)
}
// Verify response of the V2 signed HTTP request.
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
recV2 := httptest.NewRecorder()
// construct HTTP request for DELETE bucket.
reqV2, err := newTestSignedRequestV2("DELETE", getBucketLocationURL("", bucketName), 0, nil, credentials.AccessKey, credentials.SecretKey, nil)
if err != nil {
t.Fatalf("Test %s: Failed to create HTTP request for RemoveBucketHandler: <ERROR> %v", instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(recV2, reqV2)
switch recV2.Code {
case http.StatusOK, http.StatusCreated, http.StatusAccepted, http.StatusNoContent:
t.Fatalf("Test %v: expected failure, but succeeded with %v", instanceType, recV2.Code)
}
}
// Wrapper for calling GetBucketPolicy HTTP handler tests for both XL multiple disks and single node setup.
func TestGetBucketLocationHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testGetBucketLocationHandler, []string{"GetBucketLocation"})
}
func testGetBucketLocationHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
// test cases with sample input and expected output.
testCases := []struct {
bucketName string
accessKey string
secretKey string
// expected Response.
expectedRespStatus int
locationResponse []byte
errorResponse APIErrorResponse
shouldPass bool
}{
// Test case - 1.
// Tests for authenticated request and proper response.
{
bucketName: bucketName,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
locationResponse: []byte(`<?xml version="1.0" encoding="UTF-8"?>
<LocationConstraint xmlns="http://s3.amazonaws.com/doc/2006-03-01/"></LocationConstraint>`),
errorResponse: APIErrorResponse{},
shouldPass: true,
},
// Test case - 2.
// Tests for signature mismatch error.
{
bucketName: bucketName,
accessKey: "abcd",
secretKey: "abcd",
expectedRespStatus: http.StatusForbidden,
locationResponse: []byte(""),
errorResponse: APIErrorResponse{
Resource: SlashSeparator + bucketName + SlashSeparator,
Code: "InvalidAccessKeyId",
Message: "The Access Key Id you provided does not exist in our records.",
},
shouldPass: false,
},
}
for i, testCase := range testCases {
if i != 1 {
continue
}
// initialize httptest Recorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
// construct HTTP request for Get bucket location.
req, err := newTestSignedRequestV4("GET", getBucketLocationURL("", testCase.bucketName), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for GetBucketLocationHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
if rec.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, rec.Code)
}
if !bytes.Equal(testCase.locationResponse, rec.Body.Bytes()) && testCase.shouldPass {
t.Errorf("Test %d: %s: Expected the response to be `%s`, but instead found `%s`", i+1, instanceType, string(testCase.locationResponse), rec.Body.String())
}
errorResponse := APIErrorResponse{}
err = xml.Unmarshal(rec.Body.Bytes(), &errorResponse)
if err != nil && !testCase.shouldPass {
t.Fatalf("Test %d: %s: Unable to marshal response body %s", i+1, instanceType, rec.Body.String())
}
if errorResponse.Resource != testCase.errorResponse.Resource {
t.Errorf("Test %d: %s: Expected the error resource to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Resource, errorResponse.Resource)
}
if errorResponse.Message != testCase.errorResponse.Message {
t.Errorf("Test %d: %s: Expected the error message to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Message, errorResponse.Message)
}
if errorResponse.Code != testCase.errorResponse.Code {
t.Errorf("Test %d: %s: Expected the error code to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Code, errorResponse.Code)
}
// Verify response of the V2 signed HTTP request.
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
recV2 := httptest.NewRecorder()
// construct HTTP request for PUT bucket policy endpoint.
reqV2, err := newTestSignedRequestV2("GET", getBucketLocationURL("", testCase.bucketName), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for PutBucketPolicyHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(recV2, reqV2)
if recV2.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, recV2.Code)
}
errorResponse = APIErrorResponse{}
err = xml.Unmarshal(recV2.Body.Bytes(), &errorResponse)
if err != nil && !testCase.shouldPass {
t.Fatalf("Test %d: %s: Unable to marshal response body %s", i+1, instanceType, recV2.Body.String())
}
if errorResponse.Resource != testCase.errorResponse.Resource {
t.Errorf("Test %d: %s: Expected the error resource to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Resource, errorResponse.Resource)
}
if errorResponse.Message != testCase.errorResponse.Message {
t.Errorf("Test %d: %s: Expected the error message to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Message, errorResponse.Message)
}
if errorResponse.Code != testCase.errorResponse.Code {
t.Errorf("Test %d: %s: Expected the error code to be `%s`, but instead found `%s`", i+1, instanceType, testCase.errorResponse.Code, errorResponse.Code)
}
}
// Test for Anonymous/unsigned http request.
// ListBucketsHandler doesn't support bucket policies, setting the policies shouldn't make any difference.
anonReq, err := newTestRequest("GET", getBucketLocationURL("", bucketName), 0, nil)
if err != nil {
t.Fatalf("MinIO %s: Failed to create an anonymous request.", instanceType)
}
// ExecObjectLayerAPIAnonTest - Calls the HTTP API handler using the anonymous request, validates the ErrAccessDeniedResponse,
// sets the bucket policy using the policy statement generated from `getReadOnlyBucketStatement` so that the
// unsigned request goes through and its validated again.
ExecObjectLayerAPIAnonTest(t, obj, "TestGetBucketLocationHandler", bucketName, "", instanceType, apiRouter, anonReq, getAnonReadOnlyBucketPolicy(bucketName))
// HTTP request for testing when `objectLayer` is set to `nil`.
// There is no need to use an existing bucket and valid input for creating the request
// since the `objectLayer==nil` check is performed before any other checks inside the handlers.
// The only aim is to generate an HTTP request in a way that the relevant/registered end point is evoked/called.
nilBucket := "dummy-bucket"
nilReq, err := newTestRequest("GET", getBucketLocationURL("", nilBucket), 0, nil)
if err != nil {
t.Errorf("MinIO %s: Failed to create HTTP request for testing the response when object Layer is set to `nil`.", instanceType)
}
// Executes the object layer set to `nil` test.
// `ExecObjectLayerAPINilTest` manages the operation.
ExecObjectLayerAPINilTest(t, nilBucket, "", instanceType, apiRouter, nilReq)
}
// Wrapper for calling HeadBucket HTTP handler tests for both XL multiple disks and single node setup.
func TestHeadBucketHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testHeadBucketHandler, []string{"HeadBucket"})
}
func testHeadBucketHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
// test cases with sample input and expected output.
testCases := []struct {
bucketName string
accessKey string
secretKey string
// expected Response.
expectedRespStatus int
}{
// Test case - 1.
// Bucket exists.
{
bucketName: bucketName,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
},
// Test case - 2.
// Non-existent bucket name.
{
bucketName: "2333",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusNotFound,
},
// Test case - 3.
// Testing for signature mismatch error.
// setting invalid acess and secret key.
{
bucketName: bucketName,
accessKey: "abcd",
secretKey: "abcd",
expectedRespStatus: http.StatusForbidden,
},
}
for i, testCase := range testCases {
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
// construct HTTP request for HEAD bucket.
req, err := newTestSignedRequestV4("HEAD", getHEADBucketURL("", testCase.bucketName), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for HeadBucketHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
if rec.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, rec.Code)
}
// Verify response the V2 signed HTTP request.
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
recV2 := httptest.NewRecorder()
// construct HTTP request for PUT bucket policy endpoint.
reqV2, err := newTestSignedRequestV2("HEAD", getHEADBucketURL("", testCase.bucketName), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for PutBucketPolicyHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(recV2, reqV2)
if recV2.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, recV2.Code)
}
}
// Test for Anonymous/unsigned http request.
anonReq, err := newTestRequest("HEAD", getHEADBucketURL("", bucketName), 0, nil)
if err != nil {
t.Fatalf("MinIO %s: Failed to create an anonymous request for bucket \"%s\": <ERROR> %v",
instanceType, bucketName, err)
}
// ExecObjectLayerAPIAnonTest - Calls the HTTP API handler using the anonymous request, validates the ErrAccessDeniedResponse,
// sets the bucket policy using the policy statement generated from `getReadOnlyBucketStatement` so that the
// unsigned request goes through and its validated again.
ExecObjectLayerAPIAnonTest(t, obj, "TestHeadBucketHandler", bucketName, "", instanceType, apiRouter, anonReq, getAnonReadOnlyBucketPolicy(bucketName))
// HTTP request for testing when `objectLayer` is set to `nil`.
// There is no need to use an existing bucket and valid input for creating the request
// since the `objectLayer==nil` check is performed before any other checks inside the handlers.
// The only aim is to generate an HTTP request in a way that the relevant/registered end point is evoked/called.
nilBucket := "dummy-bucket"
nilReq, err := newTestRequest("HEAD", getHEADBucketURL("", nilBucket), 0, nil)
if err != nil {
t.Errorf("MinIO %s: Failed to create HTTP request for testing the response when object Layer is set to `nil`.", instanceType)
}
// execute the object layer set to `nil` test.
// `ExecObjectLayerAPINilTest` manages the operation.
ExecObjectLayerAPINilTest(t, nilBucket, "", instanceType, apiRouter, nilReq)
}
// Wrapper for calling TestListMultipartUploadsHandler tests for both XL multiple disks and single node setup.
func TestListMultipartUploadsHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testListMultipartUploadsHandler, []string{"ListMultipartUploads"})
}
// testListMultipartUploadsHandler - Tests validate listing of multipart uploads.
func testListMultipartUploadsHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
// Collection of non-exhaustive ListMultipartUploads test cases, valid errors
// and success responses.
testCases := []struct {
// Inputs to ListMultipartUploads.
bucket string
prefix string
keyMarker string
uploadIDMarker string
delimiter string
maxUploads string
accessKey string
secretKey string
expectedRespStatus int
shouldPass bool
}{
// Test case - 1.
// Setting invalid bucket name.
{
bucket: ".test",
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "",
maxUploads: "0",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusNotFound,
shouldPass: false,
},
// Test case - 2.
// Setting a non-existent bucket.
{
bucket: "volatile-bucket-1",
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "",
maxUploads: "0",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusNotFound,
shouldPass: false,
},
// Test case -3.
// Delimiter unsupported, but response is empty.
{
bucket: bucketName,
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "-",
maxUploads: "0",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
shouldPass: true,
},
// Test case - 4.
// Setting Invalid prefix and marker combination.
{
bucket: bucketName,
prefix: "asia",
keyMarker: "europe-object",
uploadIDMarker: "",
delimiter: "",
maxUploads: "0",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusNotImplemented,
shouldPass: false,
},
// Test case - 5.
// Invalid upload id and marker combination.
{
bucket: bucketName,
prefix: "asia",
keyMarker: "asia/europe/",
uploadIDMarker: "abc",
delimiter: "",
maxUploads: "0",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusNotImplemented,
shouldPass: false,
},
// Test case - 6.
// Setting a negative value to max-uploads paramater, should result in http.StatusBadRequest.
{
bucket: bucketName,
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "",
maxUploads: "-1",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusBadRequest,
shouldPass: false,
},
// Test case - 7.
// Case with right set of parameters,
// should result in success 200OK.
{
bucket: bucketName,
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: SlashSeparator,
maxUploads: "100",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
shouldPass: true,
},
// Test case - 8.
// Good case without delimiter.
{
bucket: bucketName,
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "",
maxUploads: "100",
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
shouldPass: true,
},
// Test case - 9.
// Setting Invalid AccessKey and SecretKey to induce and verify Signature Mismatch error.
{
bucket: bucketName,
prefix: "",
keyMarker: "",
uploadIDMarker: "",
delimiter: "",
maxUploads: "100",
accessKey: "abcd",
secretKey: "abcd",
expectedRespStatus: http.StatusForbidden,
shouldPass: true,
},
}
for i, testCase := range testCases {
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
// construct HTTP request for List multipart uploads endpoint.
u := getListMultipartUploadsURLWithParams("", testCase.bucket, testCase.prefix, testCase.keyMarker, testCase.uploadIDMarker, testCase.delimiter, testCase.maxUploads)
req, gerr := newTestSignedRequestV4("GET", u, 0, nil, testCase.accessKey, testCase.secretKey, nil)
if gerr != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for ListMultipartUploadsHandler: <ERROR> %v", i+1, instanceType, gerr)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
if rec.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, rec.Code)
}
// Verify response the V2 signed HTTP request.
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
recV2 := httptest.NewRecorder()
// construct HTTP request for PUT bucket policy endpoint.
// verify response for V2 signed HTTP request.
reqV2, err := newTestSignedRequestV2("GET", u, 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for PutBucketPolicyHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(recV2, reqV2)
if recV2.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, recV2.Code)
}
}
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
// construct HTTP request for List multipart uploads endpoint.
u := getListMultipartUploadsURLWithParams("", bucketName, "", "", "", "", "")
req, err := newTestSignedRequestV4("GET", u, 0, nil, "", "", nil) // Generate an anonymous request.
if err != nil {
t.Fatalf("Test %s: Failed to create HTTP request for ListMultipartUploadsHandler: <ERROR> %v", instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
if rec.Code != http.StatusForbidden {
t.Errorf("Test %s: Expected the response status to be `http.StatusForbidden`, but instead found `%d`", instanceType, rec.Code)
}
url := getListMultipartUploadsURLWithParams("", testCases[6].bucket, testCases[6].prefix, testCases[6].keyMarker,
testCases[6].uploadIDMarker, testCases[6].delimiter, testCases[6].maxUploads)
// Test for Anonymous/unsigned http request.
anonReq, err := newTestRequest("GET", url, 0, nil)
if err != nil {
t.Fatalf("MinIO %s: Failed to create an anonymous request for bucket \"%s\": <ERROR> %v",
instanceType, bucketName, err)
}
// ExecObjectLayerAPIAnonTest - Calls the HTTP API handler using the anonymous request, validates the ErrAccessDeniedResponse,
// sets the bucket policy using the policy statement generated from `getWriteOnlyBucketStatement` so that the
// unsigned request goes through and its validated again.
ExecObjectLayerAPIAnonTest(t, obj, "TestListMultipartUploadsHandler", bucketName, "", instanceType, apiRouter, anonReq, getAnonWriteOnlyBucketPolicy(bucketName))
// HTTP request for testing when `objectLayer` is set to `nil`.
// There is no need to use an existing bucket and valid input for creating the request
// since the `objectLayer==nil` check is performed before any other checks inside the handlers.
// The only aim is to generate an HTTP request in a way that the relevant/registered end point is evoked/called.
nilBucket := "dummy-bucket"
url = getListMultipartUploadsURLWithParams("", nilBucket, "dummy-prefix", testCases[6].keyMarker,
testCases[6].uploadIDMarker, testCases[6].delimiter, testCases[6].maxUploads)
nilReq, err := newTestRequest("GET", url, 0, nil)
if err != nil {
t.Errorf("MinIO %s: Failed to create HTTP request for testing the response when object Layer is set to `nil`.", instanceType)
}
// execute the object layer set to `nil` test.
// `ExecObjectLayerAPINilTest` manages the operation.
ExecObjectLayerAPINilTest(t, nilBucket, "", instanceType, apiRouter, nilReq)
}
// Wrapper for calling TestListBucketsHandler tests for both XL multiple disks and single node setup.
func TestListBucketsHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testListBucketsHandler, []string{"ListBuckets"})
}
// testListBucketsHandler - Tests validate listing of buckets.
func testListBucketsHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
testCases := []struct {
bucketName string
accessKey string
secretKey string
expectedRespStatus int
}{
// Test case - 1.
// Validate a good case request succeeds.
{
bucketName: bucketName,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedRespStatus: http.StatusOK,
},
// Test case - 2.
// Test case with invalid accessKey to produce and validate Signature MisMatch error.
{
bucketName: bucketName,
accessKey: "abcd",
secretKey: "abcd",
expectedRespStatus: http.StatusForbidden,
},
}
for i, testCase := range testCases {
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
rec := httptest.NewRecorder()
req, lerr := newTestSignedRequestV4("GET", getListBucketURL(""), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if lerr != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for ListBucketsHandler: <ERROR> %v", i+1, instanceType, lerr)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(rec, req)
if rec.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, rec.Code)
}
// Verify response of the V2 signed HTTP request.
// initialize HTTP NewRecorder, this records any mutations to response writer inside the handler.
recV2 := httptest.NewRecorder()
// construct HTTP request for PUT bucket policy endpoint.
// verify response for V2 signed HTTP request.
reqV2, err := newTestSignedRequestV2("GET", getListBucketURL(""), 0, nil, testCase.accessKey, testCase.secretKey, nil)
if err != nil {
t.Fatalf("Test %d: %s: Failed to create HTTP request for PutBucketPolicyHandler: <ERROR> %v", i+1, instanceType, err)
}
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to execute the handler.
apiRouter.ServeHTTP(recV2, reqV2)
if recV2.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, recV2.Code)
}
}
// Test for Anonymous/unsigned http request.
// ListBucketsHandler doesn't support bucket policies, setting the policies shouldn't make a difference.
anonReq, err := newTestRequest("GET", getListBucketURL(""), 0, nil)
if err != nil {
t.Fatalf("MinIO %s: Failed to create an anonymous request.", instanceType)
}
// ExecObjectLayerAPIAnonTest - Calls the HTTP API handler using the anonymous request, validates the ErrAccessDeniedResponse,
// sets the bucket policy using the policy statement generated from `getWriteOnlyObjectStatement` so that the
// unsigned request goes through and its validated again.
ExecObjectLayerAPIAnonTest(t, obj, "ListBucketsHandler", "", "", instanceType, apiRouter, anonReq, getAnonWriteOnlyBucketPolicy("*"))
// HTTP request for testing when `objectLayer` is set to `nil`.
// There is no need to use an existing bucket and valid input for creating the request
// since the `objectLayer==nil` check is performed before any other checks inside the handlers.
// The only aim is to generate an HTTP request in a way that the relevant/registered end point is evoked/called.
nilReq, err := newTestRequest("GET", getListBucketURL(""), 0, nil)
if err != nil {
t.Errorf("MinIO %s: Failed to create HTTP request for testing the response when object Layer is set to `nil`.", instanceType)
}
// execute the object layer set to `nil` test.
// `ExecObjectLayerAPINilTest` manages the operation.
ExecObjectLayerAPINilTest(t, "", "", instanceType, apiRouter, nilReq)
}
// Wrapper for calling DeleteMultipleObjects HTTP handler tests for both XL multiple disks and single node setup.
func TestAPIDeleteMultipleObjectsHandler(t *testing.T) {
ExecObjectLayerAPITest(t, testAPIDeleteMultipleObjectsHandler, []string{"DeleteMultipleObjects"})
}
func testAPIDeleteMultipleObjectsHandler(obj ObjectLayer, instanceType, bucketName string, apiRouter http.Handler,
credentials auth.Credentials, t *testing.T) {
var err error
contentBytes := []byte("hello")
sha256sum := ""
var objectNames []string
for i := 0; i < 10; i++ {
objectName := "test-object-" + strconv.Itoa(i)
// uploading the object.
_, err = obj.PutObject(GlobalContext, bucketName, objectName, mustGetPutObjReader(t, bytes.NewBuffer(contentBytes), int64(len(contentBytes)), "", sha256sum), ObjectOptions{})
// if object upload fails stop the test.
if err != nil {
t.Fatalf("Put Object %d: Error uploading object: <ERROR> %v", i, err)
}
// object used for the test.
objectNames = append(objectNames, objectName)
}
getObjectIdentifierList := func(objectNames []string) (objectIdentifierList []ObjectIdentifier) {
for _, objectName := range objectNames {
objectIdentifierList = append(objectIdentifierList, ObjectIdentifier{objectName})
}
return objectIdentifierList
}
getDeleteErrorList := func(objects []ObjectIdentifier) (deleteErrorList []DeleteError) {
for _, obj := range objects {
deleteErrorList = append(deleteErrorList, DeleteError{
Code: errorCodes[ErrAccessDenied].Code,
Message: errorCodes[ErrAccessDenied].Description,
Key: obj.ObjectName,
})
}
return deleteErrorList
}
requestList := []DeleteObjectsRequest{
{Quiet: false, Objects: getObjectIdentifierList(objectNames[:5])},
{Quiet: true, Objects: getObjectIdentifierList(objectNames[5:])},
}
// generate multi objects delete response.
successRequest0 := encodeResponse(requestList[0])
successResponse0 := generateMultiDeleteResponse(requestList[0].Quiet, requestList[0].Objects, nil)
encodedSuccessResponse0 := encodeResponse(successResponse0)
successRequest1 := encodeResponse(requestList[1])
successResponse1 := generateMultiDeleteResponse(requestList[1].Quiet, requestList[1].Objects, nil)
encodedSuccessResponse1 := encodeResponse(successResponse1)
// generate multi objects delete response for errors.
// errorRequest := encodeResponse(requestList[1])
errorResponse := generateMultiDeleteResponse(requestList[1].Quiet, requestList[1].Objects, nil)
encodedErrorResponse := encodeResponse(errorResponse)
anonRequest := encodeResponse(requestList[0])
anonResponse := generateMultiDeleteResponse(requestList[0].Quiet, nil, getDeleteErrorList(requestList[0].Objects))
encodedAnonResponse := encodeResponse(anonResponse)
testCases := []struct {
bucket string
objects []byte
accessKey string
secretKey string
expectedContent []byte
expectedRespStatus int
}{
// Test case - 1.
// Delete objects with invalid access key.
{
bucket: bucketName,
objects: successRequest0,
accessKey: "Invalid-AccessID",
secretKey: credentials.SecretKey,
expectedContent: nil,
expectedRespStatus: http.StatusForbidden,
},
// Test case - 2.
// Delete valid objects with quiet flag off.
{
bucket: bucketName,
objects: successRequest0,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedContent: encodedSuccessResponse0,
expectedRespStatus: http.StatusOK,
},
// Test case - 3.
// Delete valid objects with quiet flag on.
{
bucket: bucketName,
objects: successRequest1,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedContent: encodedSuccessResponse1,
expectedRespStatus: http.StatusOK,
},
// Test case - 4.
// Delete previously deleted objects.
{
bucket: bucketName,
objects: successRequest1,
accessKey: credentials.AccessKey,
secretKey: credentials.SecretKey,
expectedContent: encodedErrorResponse,
expectedRespStatus: http.StatusOK,
},
// Test case - 5.
// Anonymous user access denied response
// Currently anonymous users cannot delete multiple objects in MinIO server
{
bucket: bucketName,
objects: anonRequest,
accessKey: "",
secretKey: "",
expectedContent: encodedAnonResponse,
expectedRespStatus: http.StatusOK,
},
}
for i, testCase := range testCases {
var req *http.Request
var actualContent []byte
// Generate a signed or anonymous request based on the testCase
if testCase.accessKey != "" {
req, err = newTestSignedRequestV4("POST", getDeleteMultipleObjectsURL("", bucketName),
int64(len(testCase.objects)), bytes.NewReader(testCase.objects), testCase.accessKey, testCase.secretKey, nil)
} else {
req, err = newTestRequest("POST", getDeleteMultipleObjectsURL("", bucketName),
int64(len(testCase.objects)), bytes.NewReader(testCase.objects))
}
if err != nil {
t.Fatalf("Failed to create HTTP request for DeleteMultipleObjects: <ERROR> %v", err)
}
rec := httptest.NewRecorder()
// Since `apiRouter` satisfies `http.Handler` it has a ServeHTTP to execute the logic of the handler.
// Call the ServeHTTP to executes the registered handler.
apiRouter.ServeHTTP(rec, req)
// Assert the response code with the expected status.
if rec.Code != testCase.expectedRespStatus {
t.Errorf("Test %d: MinIO %s: Expected the response status to be `%d`, but instead found `%d`", i+1, instanceType, testCase.expectedRespStatus, rec.Code)
}
// read the response body.
actualContent, err = ioutil.ReadAll(rec.Body)
if err != nil {
t.Fatalf("Test %d : MinIO %s: Failed parsing response body: <ERROR> %v", i+1, instanceType, err)
}
// Verify whether the bucket obtained object is same as the one created.
if testCase.expectedContent != nil && !bytes.Equal(testCase.expectedContent, actualContent) {
t.Errorf("Test %d : MinIO %s: Object content differs from expected value.", i+1, instanceType)
}
}
// HTTP request to test the case of `objectLayer` being set to `nil`.
// There is no need to use an existing bucket or valid input for creating the request,
// since the `objectLayer==nil` check is performed before any other checks inside the handlers.
// The only aim is to generate an HTTP request in a way that the relevant/registered end point is evoked/called.
// Indicating that all parts are uploaded and initiating completeMultipartUpload.
nilBucket := "dummy-bucket"
nilObject := ""
nilReq, err := newTestSignedRequestV4("POST", getDeleteMultipleObjectsURL("", nilBucket), 0, nil, "", "", nil)
if err != nil {
t.Errorf("MinIO %s: Failed to create HTTP request for testing the response when object Layer is set to `nil`.", instanceType)
}
// execute the object layer set to `nil` test.
// `ExecObjectLayerAPINilTest` manages the operation.
ExecObjectLayerAPINilTest(t, nilBucket, nilObject, instanceType, apiRouter, nilReq)
}