multinet/dialer.go

package multinet

import (
	"bytes"
	"context"
	"fmt"
	"net"
	"net/netip"
	"sort"
	"sync"
	"time"
)

const (
	defaultFallbackDelay = 300 * time.Millisecond
)

// Dialer contains the single most important method from the net.Dialer.
type Dialer interface {
	DialContext(ctx context.Context, network, address string) (net.Conn, error)
}

// Multidialer is like Dialer, but supports link state updates.
type Multidialer interface {
	Dialer
	UpdateInterface(name string, addr netip.Addr, status bool) error
}

var (
	_ Dialer = (*net.Dialer)(nil)
	_ Dialer = (*dialer)(nil)
)

type dialer struct {
	// Protects subnets field (recursively).
	mtx     sync.RWMutex
	subnets []Subnet
	// Default options for the net.Dialer.
	dialer net.Dialer
	// If true, allow to dial only configured subnets.
	restrict bool
	// Algorithm to which picks source address for each ip.
	balancer balancer
	// Hook used in tests, overrides `net.Dialer.DialContext()`
	testHookDialContext func(d *net.Dialer, ctx context.Context, network, address string) (net.Conn, error)
	// Hostname resolver
	resolver net.Resolver
	// See Config.FallbackDelay description.
	fallbackDelay time.Duration
}

// Subnet represents a single subnet, possibly routable from multiple interfaces.
type Subnet struct {
	Mask       netip.Prefix
	Interfaces []Source
}

// Source represents a single source IP belonging to a particular subnet.
type Source struct {
	Name      string
	LocalAddr *net.TCPAddr
	Down      bool
}

// Config contains Multidialer configuration.
type Config struct {
	// Routable subnets to prioritize in CIDR format.
	Subnets []string
	// If true, the only configurd subnets available through this dialer.
	// Otherwise, a failback to the net.DefaultDialer.
	Restrict bool
	// Dialer containes default options for the net.Dialer to use.
	// LocalAddr is overriden.
	Dialer net.Dialer
	// Balancer specifies algorithm used to pick source address.
	Balancer BalancerType
	// FallbackDelay specifies the length of time to wait before
	// spawning a RFC 6555 Fast Fallback connection. That is, this
	// is the amount of time to wait for IPv6 to succeed before
	// assuming that IPv6 is misconfigured and falling back to
	// IPv4.
	//
	// If zero, a default delay of 300ms is used.
	// A negative value disables Fast Fallback support.
	FallbackDelay time.Duration
}

// NewDialer ...
func NewDialer(c Config) (Multidialer, error) {
	ifaces, err := net.Interfaces()
	if err != nil {
		return nil, err
	}
	sort.Slice(ifaces, func(i, j int) bool {
		return ifaces[i].Name < ifaces[j].Name
	})

	var sources []iface
	for i := range ifaces {
		info, err := processIface(ifaces[i])
		if err != nil {
			return nil, err
		}
		sources = append(sources, info)
	}

	var d dialer
	for _, subnet := range c.Subnets {
		s, err := processSubnet(subnet, sources)
		if err != nil {
			return nil, err
		}
		d.subnets = append(d.subnets, s)
	}

	switch c.Balancer {
	case BalancerTypeNoop:
		d.balancer = &firstEnabled{d: &d}
	case BalancerTypeRoundRobin:
		d.balancer = &roundRobin{d: &d}
	default:
		return nil, fmt.Errorf("invalid balancer type: %s", c.Balancer)
	}

	d.restrict = c.Restrict
	d.resolver.Dial = d.dialContextIP
	d.fallbackDelay = c.FallbackDelay
	if d.fallbackDelay == 0 {
		d.fallbackDelay = defaultFallbackDelay
	}

	return &d, nil
}

type iface struct {
	info  net.Interface
	addrs []netip.Prefix
}

func processIface(info net.Interface) (iface, error) {
	ips, err := info.Addrs()
	if err != nil {
		return iface{}, err
	}

	var addrs []netip.Prefix
	for i := range ips {
		p, err := netip.ParsePrefix(ips[i].String())
		if err != nil {
			return iface{}, err
		}

		addrs = append(addrs, p)
	}
	return iface{info: info, addrs: addrs}, nil
}

func processSubnet(subnet string, sources []iface) (Subnet, error) {
	s, err := netip.ParsePrefix(subnet)
	if err != nil {
		return Subnet{}, err
	}

	var ifs []Source
	for _, source := range sources {
		for i := range source.addrs {
			src := source.addrs[i].Addr()
			if s.Contains(src) {
				ifs = append(ifs, Source{
					Name:      source.info.Name,
					LocalAddr: &net.TCPAddr{IP: net.IP(src.AsSlice())},
				})
			}
		}
	}

	sort.Slice(ifs, func(i, j int) bool {
		if ifs[i].Name != ifs[j].Name {
			return ifs[i].Name < ifs[j].Name
		}
		return bytes.Compare(ifs[i].LocalAddr.IP, ifs[j].LocalAddr.IP) == -1
	})

	return Subnet{
		Mask:       s,
		Interfaces: ifs,
	}, nil
}

// DialContext implements the Dialer interface.
// Hostnames for address are currently not supported.
func (d *dialer) DialContext(ctx context.Context, network, address string) (net.Conn, error) {
	addr, err := netip.ParseAddrPort(address)
	if err != nil { //try resolve as hostname
		return d.dialContextHostname(ctx, network, address)
	}
	return d.dialAddr(ctx, network, address, addr)
}

func (d *dialer) dialContextIP(ctx context.Context, network, address string) (net.Conn, error) {
	addr, err := netip.ParseAddrPort(address)
	if err != nil {
		return nil, err
	}
	return d.dialAddr(ctx, network, address, addr)
}

func (d *dialer) dialContextHostname(ctx context.Context, network, address string) (net.Conn, error) {
	// https://github.com/golang/go/blob/release-branch.go1.21/src/net/dial.go#L488
	addrPorts, err := d.resolveHostIPs(ctx, address, network)
	if err != nil {
		return nil, err
	}

	var primaries, fallbacks []netip.AddrPort
	if d.fallbackDelay >= 0 && network == "tcp" {
		primaries, fallbacks = splitByType(addrPorts)
	} else {
		primaries = addrPorts
	}

	return d.dialParallel(ctx, network, primaries, fallbacks)
}

func (d *dialer) dialSerial(ctx context.Context, network string, addrs []netip.AddrPort) (net.Conn, error) {
	var firstErr error
	for _, addr := range addrs {
		select {
		case <-ctx.Done():
			return nil, ctx.Err()
		default:
		}

		conn, err := d.dialAddr(ctx, network, addr.String(), addr)
		if err == nil {
			return conn, nil
		}
		if firstErr == nil {
			firstErr = err
		}
	}
	return nil, fmt.Errorf("failed to connect any resolved address: %w", firstErr)
}

func (d *dialer) dialParallel(ctx context.Context, network string, primaries, fallbacks []netip.AddrPort) (net.Conn, error) {
	if len(fallbacks) == 0 {
		return d.dialSerial(ctx, network, primaries)
	}

	returned := make(chan struct{})
	defer close(returned)

	type dialResult struct {
		net.Conn
		error
		primary bool
		done    bool
	}
	results := make(chan dialResult)

	dialerFunc := func(ctx context.Context, primary bool) {
		addrs := primaries
		if !primary {
			addrs = fallbacks
		}
		c, err := d.dialSerial(ctx, network, addrs)
		select {
		case results <- dialResult{Conn: c, error: err, primary: primary, done: true}:
		case <-returned:
			if c != nil {
				c.Close()
			}
		}
	}

	var primary, fallback dialResult

	primaryCtx, primaryCancel := context.WithCancel(ctx)
	defer primaryCancel()
	go dialerFunc(primaryCtx, true)

	fallbackTimer := time.NewTimer(d.fallbackDelay)
	defer fallbackTimer.Stop()

	for {
		select {
		case <-fallbackTimer.C:
			fallbackCtx, fallbackCancel := context.WithCancel(ctx)
			defer fallbackCancel()
			go dialerFunc(fallbackCtx, false)

		case res := <-results:
			if res.error == nil {
				return res.Conn, nil
			}
			if res.primary {
				primary = res
			} else {
				fallback = res
			}
			if primary.done && fallback.done {
				return nil, primary.error
			}
			if res.primary && fallbackTimer.Stop() {
				// If we were able to stop the timer, that means it
				// was running (hadn't yet started the fallback), but
				// we just got an error on the primary path, so start
				// the fallback immediately (in 0 nanoseconds).
				fallbackTimer.Reset(0)
			}
		}
	}
}

func (d *dialer) resolveHostIPs(ctx context.Context, address string, network string) ([]netip.AddrPort, error) {
	host, port, err := net.SplitHostPort(address)
	if err != nil {
		return nil, fmt.Errorf("invalid address format: %w", err)
	}

	portnum, err := d.resolver.LookupPort(ctx, network, port)
	if err != nil {
		return nil, fmt.Errorf("invalid port format: %w", err)
	}

	ips, err := d.resolver.LookupHost(ctx, host)
	if err != nil {
		return nil, fmt.Errorf("failed to resolve host address: %w", err)
	}

	if len(ips) == 0 {
		return nil, fmt.Errorf("failed to resolve address for [%s]%s", network, address)
	}

	var ipAddrs []netip.Addr
	for _, ip := range ips {
		ipAddr, err := netip.ParseAddr(ip)
		if err != nil {
			return nil, fmt.Errorf("failed to parse ip address '%s': %w", ip, err)
		}
		ipAddrs = append(ipAddrs, ipAddr)
	}

	var addrPorts []netip.AddrPort
	for _, ipAddr := range ipAddrs {
		addrPorts = append(addrPorts, netip.AddrPortFrom(ipAddr, uint16(portnum)))
	}
	return addrPorts, nil
}

func (d *dialer) dialAddr(ctx context.Context, network, address string, addr netip.AddrPort) (net.Conn, error) {
	d.mtx.RLock()
	defer d.mtx.RUnlock()

	for i := range d.subnets {
		if d.subnets[i].Mask.Contains(addr.Addr()) {
			return d.balancer.DialContext(ctx, &d.subnets[i], network, address)
		}
	}

	if d.restrict {
		return nil, fmt.Errorf("no suitable interface for: [%s]%s", network, address)
	}
	return d.dialer.DialContext(ctx, network, address)
}

func (d *dialer) dialContext(nd *net.Dialer, ctx context.Context, network, address string) (net.Conn, error) {
	if h := d.testHookDialContext; h != nil {
		return h(nd, ctx, network, address)
	}
	return nd.DialContext(ctx, network, address)
}

// UpdateInterface implements the Multidialer interface.
// Updating address on a specific interface is currently not supported.
func (d *dialer) UpdateInterface(iface string, addr netip.Addr, up bool) error {
	d.mtx.Lock()
	defer d.mtx.Unlock()

	for i := range d.subnets {
		for j := range d.subnets[i].Interfaces {
			matchIface := d.subnets[i].Interfaces[j].Name == iface
			if matchIface {
				d.subnets[i].Interfaces[j].Down = !up
				continue
			}

			a, _ := netip.AddrFromSlice(d.subnets[i].Interfaces[j].LocalAddr.IP)
			matchAddr := a.IsUnspecified() || addr == a
			if matchAddr {
				d.subnets[i].Interfaces[j].Down = !up
			}
		}
	}
	return nil
}

// splitByType divides an address list into two categories:
// the first address, and any with same type, are returned as
// primaries, while addresses with the opposite type are returned
// as fallbacks.
func splitByType(addrs []netip.AddrPort) (primaries []netip.AddrPort, fallbacks []netip.AddrPort) {
	var primaryLabel bool
	for i, addr := range addrs {
		label := addr.Addr().Is4()
		if i == 0 || label == primaryLabel {
			primaryLabel = label
			primaries = append(primaries, addr)
		} else {
			fallbacks = append(fallbacks, addr)
		}
	}
	return
}