Problem: transactions with wrong hashes are accepted to the chain if
consensus nodes are designated as Oracle nodes. The result is wrong
MerkleRoot for the accepted block. Consensus nodes got such blocks
right from the dbft and store them without errors, but if
non-consensus nodes are present in the network, they just can't accept
these "bad" blocks:
```
2021-11-29T12:56:40.533+0300 WARN blockQueue: failed adding block into the blockchain {"error": "invalid block: MerkleRoot mismatch (expected a866b57ad637934f7a7700e3635a549387e644970b42681d865a54c3b3a46122, calculated d465aafabaf4539a3f619d373d178eeeeab7acb9847e746e398706c8c1582bf8)", "blockHeight": 17, "nextIndex": 18}
```
This problem happens because of transaction hash caching. We can't set
transaction hash if transaction construction wasn't yet completed.
Problem:
```
--- FAIL: TestMakeDirForFile_HappyPath (0.01s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestMakeDirForFile_HappyPath402638411\001\testDir\testFile.test: The process cannot access the file because it is being used by another process.
--- FAIL: TestMakeDirForFile_Negative (0.01s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestMakeDirForFile_Negative672737582\001\testFile.test: The process cannot access the file because it is being used by another process.
FAIL
```
Solution:
Release resources occupied by os.Create.
Problem:
```
--- FAIL: TestMemCachedPersist (0.07s)
--- FAIL: TestMemCachedPersist/BoltDBStore (0.07s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestMemCachedPersist_BoltDBStore294966711\001\test_bolt_db: The process cannot access the file because it is being used by another process.
```
Solution:
Release the resources occupied by the DB.
We use 2 prefixes for storing items because of state synchronization.
This commit allows to parametrize dao with the default prefix.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Copying just the scope doesn't work for CustomContracts, CustomGroups and
Rules because they all contain additional metadata. Thanks @mialbu for
reporting this.
b9be892bf9 has made Persist asynchronous which
is very effective in allowing the system to continue processing
blocks/transactions while flushing things to disk. It at the same time is very
dangerous in that if the disk is slow and it takes much time to flush KV set
(more than persisting interval), there might be even bigger new KV set in
MemCachedStore by the time it finishes. Even if the system immediately starts
to flush this new data set it (being bigger) can take more time than the
previous one. And while doing so a new data set will appear in memory,
potentially again bigger than this.
So we can easily end up with the system going out of control, consuming more
and more memory and taking more and more time to persist a single set of
data. To avoid this we need to detect such condition and just wait for Persist
to really finish its job and release the resources.
N3 contracts require method and array of arguments to function correctly, but
CreateFunctionInvocationScript can produce scripts that won't work correctly
if one is to pass anything but a single array parameter to it. This doesn't
make much sense, so we can always expect there to be an array of parameters in
the third positional invokefunction argument (the same way C# node does).
Everywhere it matters (and that's callExFromNative() now) it's incremented
already, so when we're doing Call() at the same time (and it's done to invoke
`_initialize` method) we're effectively double-incrementing it.
Standards are NEP-11 and NEP-17, not NEP11, not NEP17, not anything
else. Variable/function names of course can use whatever fits, but documents
and comments should be consistent wrt this.
Oracle responses must use the same set of signers as oracle requests even
though the transaction itself is signed by oracle nodes/contract.
We can probably improve interop.Context by removing Tx field completely and
adding more functionality to Container, but it's not very convenient for
VerifyWitness and will require adding more stub-like methods for Block, so Tx
is used for now (and we do have it in every relevant case).
I don't think it's possible with regular service functioning, but it happens
during testing because of pointer reuse:
WARNING: DATA RACE
Read at 0x00c003a0e3f0 by goroutine 114:
github.com/nspcc-dev/neo-go/pkg/services/notary.(*Notary).verifyIncompleteWitnesses()
/home/runner/work/neo-go/neo-go/pkg/services/notary/notary.go:441 +0x1dc
github.com/nspcc-dev/neo-go/pkg/services/notary.(*Notary).OnNewRequest()
/home/runner/work/neo-go/neo-go/pkg/services/notary/notary.go:188 +0x205
github.com/nspcc-dev/neo-go/pkg/core.TestNotary.func11()
/home/runner/work/neo-go/neo-go/pkg/core/notary_test.go:347 +0x612
github.com/nspcc-dev/neo-go/pkg/core.TestNotary()
/home/runner/work/neo-go/neo-go/pkg/core/notary_test.go:443 +0xe33
testing.tRunner()
/opt/hostedtoolcache/go/1.16.10/x64/src/testing/testing.go:1193 +0x202
Previous write at 0x00c003a0e3f0 by goroutine 104:
github.com/nspcc-dev/neo-go/pkg/services/notary.(*Notary).finalize()
/home/runner/work/neo-go/neo-go/pkg/services/notary/notary.go:338 +0x50a
github.com/nspcc-dev/neo-go/pkg/services/notary.(*Notary).PostPersist()
/home/runner/work/neo-go/neo-go/pkg/services/notary/notary.go:314 +0x297
github.com/nspcc-dev/neo-go/pkg/services/notary.(*Notary).Run()
/home/runner/work/neo-go/neo-go/pkg/services/notary/notary.go:169 +0x4a7
Serializing/deserializing the payload yields this:
Error: Received unexpected error:
both main and fallback transactions should have the same ValidUntil value
CONVERT call base price is 8192. DUP, ISTYPE and JMPIF all cost 2. So we add
0.07% overhead in the worst case and save 99.93% otherwise.
At the same time, old code was just two bytes and new one is seven, but I
think it's tolerable considering how much GAS it can potentially save.
Fix#2250.
See neo-project/neo#2622. The implementation is somewhat asymmetric (and not
very efficient) for binary/JSON encoding/decoding, but it should be
sufficient.
Sometimes user needs to construct transaction by itself, so it's better
to unify nonce sources for auto-generated and manually-generated
transactions to avoid nonce collisions in tests.
Eventually this will be replaced by `pkg/neotest` invocations but for
now it allows us to remove NNS constants together with the tests.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Implementing a separate `Signer` interface is beneficial in multiple
ways:
1. Support both single and multiple transaction witnesses.
2. It should be easy to add contract signer this way.
Tests should use accounts created with `NewAccount` so hiding all
details doesn't seem to be an issue.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Use circular buffer which is a bit more appropriate. The problem is that
priority queue accepts and stores equal items which wastes memory even in
normal usage scenario, but it's especially dangerous if the node is stuck for
some reason. In this case it'll accept from peers and put into queue the same
blocks again and again leaking memory up to OOM condition.
Notice that queue length calculation might be wrong in case circular buffer
wraps, but it's not very likely to happen (usually blocks not coming from the
queue are added by consensus and it's not very fast in doing so).
In application logs hashes are serialized as base64 so it is useful
to convert them back to address via `util convert`.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Set all necessary context before file traversal, not only import
maps. Also, we can skip restoring import maps because all our code is
processed via `For*` iterators which set necessary context.
We can also refactor this a bit to have all context in one place,
this will be done in #2086.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Notes for witnesses:
* [N sig + M multisig + K contract] combination is possible where N, M, K >=0.
* Each verification script should be properly filled in.
* Each invocation script should either be empty or contain exactly one
signature.
Real persistent storage guarantees that result of Seek is sorted
by keys. The idea of optimisation is to merge two sorted seek
results into one (memStore+persistentStore), so that
(*MemCachedStore).Seek will return sorted list. The only thing
that remains is to sort items got from (*MemoryStore).Seek.
MemoryStore is used in a MemCachedStore as a persistent layer in tests.
Further commits suppose that persistent storage returns sorted values
from Seek, so sort the result of MemoryStore.Seek.
Benchmark results for 10000 matching items in MemoryStore compared to
master:
name old time/op new time/op delta
MemorySeek-8 712µs ± 0% 3850µs ± 0% +440.52% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
MemorySeek-8 160kB ± 0% 2724kB ± 0% +1602.61% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
MemorySeek-8 10.0k ± 0% 10.0k ± 0% +0.24% (p=0.000 n=10+10)
For details on implementation efficiency see the
https://github.com/nspcc-dev/neo-go/pull/2193#discussion_r722993358.
In N3 no arguments passed should be treated as empty arguments array not as
missing array of arguments, because the array must be present even for
functions that accept no parameters.
Our current algorithm marks function as used if it is called
at least ones, even if the callee function is itself unused.
This commit implements more clever traversal to collect usage
information more precisely.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
(*Billet).Traverse changes:
1. Get rid of the `offset` argument. We can cut `from` and pass just the
part that remains. This implies that node with path matching `from` will
also be included in the result, so additional check needs to be added to
the callback function.
2. Pass `path` and `from` without search prefix. Append prefix to the
result inside the callback.
3. Remove duplicating code.
(*Trie).Find changes:
1. Properly prepare `from` argument for traversing function. It closly
depends on the `path` argument.
Because `MaxKeySize` is bigger than integer size, we fail on integer
cast while retreiving items from map. SETITEM is not affected.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Close immediately after read/write. This can be a bit slower but
we store everything in memory anyway and code size is smaller.
`wallet.Close()` method is now a no-op.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
