Made connections in parallel to check the limit and attempt to make one
more connection beyond the limit. Only "default" test case is failing,
because default number of connections is 64 (quite large for slow
runners). The failure reason is:
* given ~1 second for [dealing + request] per connection (time is taken
from the test log)
* by the moment 65-th connection is reached, some connections from the
start of the test have died due to inactivity (this process literally
takes 1 minute)
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
1. Replace isFinished atomic variable with a channel, no functional changes
here, just use more common way as all our services do.
2. Do not check erors from SetReadDeadline and ReadMessage on exit. It
seems to be not quite right because connection is not closed by this
moment, and thus, these error checks are racy.
3. Add read timeout for the message reader. It is needed because some
tests may leave message unread in the end which results in hanging
test cleanup.
4. Add drain loop to message reader in order not to block WS reader on
sending message.
Ref. https://github.com/nspcc-dev/neo-go/pull/3392#issuecomment-2031590403.
It's clear that TestBadSubUnsub is hanging on test cleanup, in
particular, on attempt to wait for wsRead routine to exit. The only
place where wsRead routine may hang is sending to msgCh in case if
receiver is not going to read from this channel:
```
2024-04-02T08:14:51.4957621Z goroutine 14329 [chan receive]:
2024-04-02T08:14:51.4958010Z github.com/nspcc-dev/neo-go/pkg/services/rpcsrv.initCleanServerAndWSClient.func1()
2024-04-02T08:14:51.4958344Z D:/a/neo-go/neo-go/pkg/services/rpcsrv/subscription_test.go:80 +0x71
2024-04-02T08:14:51.4958457Z testing.(*common).Cleanup.func1()
2024-04-02T08:14:51.4958757Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1175 +0x17a
2024-04-02T08:14:51.4958903Z testing.(*common).runCleanup(0xc002cf5860, 0x0)
2024-04-02T08:14:51.4959193Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1353 +0x262
2024-04-02T08:14:51.4959291Z testing.tRunner.func2()
2024-04-02T08:14:51.4959566Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1683 +0x51
2024-04-02T08:14:51.4959695Z testing.tRunner(0xc002cf5860, 0x141687410)
2024-04-02T08:14:51.4959976Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1695 +0x25e
2024-04-02T08:14:51.4960115Z created by testing.(*T).Run in goroutine 1
2024-04-02T08:14:51.4960385Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1742 +0x826
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Previously findstorage returns null for the results key if a contract
state is not found. C# returns an empty list.
Close#3370
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Close#3366. Roll back the test structure to the one that it has before
d2a7162217. Add one extra block to ensure
that main transaction won't be finilized. Add NVB increment slippage to
avoid race between the first fallback acceptance and block acceptance.
Add NVB increment slippage to the rest of fallbacks for test structure
unification.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Add error channel to prevent data race in the test.
Increase waiting interval for subscriptions awaiting up to 2 seconds.
Failing is caused by slow subscriptions.
Close#2958
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Default http.Client and http.Transport can be really slow. Also on
windows Timeout: time.Second was not enough. Probably network related
issue. As mentioned in https://github
.com/nspcc-dev/neo-go/issues/2975#issuecomment-1750523651 forcely use
only tcp4 and FallbackDelay: -1. This made TestRPC little bit faster so
gh windows runner can manage it without timeout or POST request fails.
Close#2975Close#3314
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
FaultException can be non-empty even in Halt state when there were
problems with stack marshaling to JSON.
Signed-off-by: Evgenii Stratonikov <fyfyrchik@runbox.com>
This is not the way intended in https://github.com/neo-project/proposals/pull/156.
-511 covers _both_ cases because users hardly can distinguish one from another,
it's just that our mempool implementation has error codes for both..
Signed-off-by: Roman Khimov <roman@nspcc.ru>
mempool.ErrInsufficientFunds is used when sender doesn't have enough
balance to pay the submitted transaction fees (-511 code according to
https://github.com/neo-project/proposals/pull/156). mempool.ErrConflict is
used when sender is not able to pay the overall transactions fee sum in
the pool (generic -500 error according to the proposal).
This bugfix is kind of breaking change for those users who relied on the
old -511 code previously returning "insufficient funds" error.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
If we're withdrawing funds to contract that has onNEP17Payment method,
then it may call Notary's withdraw one more time, but the account's
state is not yet updated by this moment.
The problem is similar to https://github.com/neo-project/neo/pull/2734.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Shouldn't affect things much, yet at the same time we no longer need any
connection after we're done with the request.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
Add waiting for startSending to ensure that the client is ready before
the server starts sending messages.
Close#3005Close#3312
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
The theory is:
* we add a block
* it triggers notary
* which can process the fallback before we're to setFinalizeWithError
* it'll fail and require an additional block to enter, but it's never added
* FAIL
The solution is:
* always add an additional block, but treat the first fb specially
Signed-off-by: Roman Khimov <roman@nspcc.ru>
And refactor some code a bit, don't use bytes.Clone where type-specific
helpers may be used instead.
Close#2907.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
It's a bug since Prefix is shared between all iterator items and
appending is not enough. If prefix has enough capacity, then new slice
won't be created and the previous item's prefix will be changed.
This commit fixes the following test failure caused by moving from
bytes.Clone to slice.Copy:
```
--- FAIL: TestComlileAndInvokeFunction/test_Storage.Find (0.02s)
--- FAIL: TestComlileAndInvokeFunction/test_Storage.Find/keys_only (0.01s)
contract_test.go:866:
Error Trace: /home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/contract_test.go:866
Error: Not equal:
expected: []stackitem.Item{(*stackitem.ByteArray)(0xc000a1cdf8), (*stackitem.ByteArray)(0xc000a1ce10)}
actual : []stackitem.Item{(*stackitem.ByteArray)(0xc000a1cdb0), (*stackitem.ByteArray)(0xc000a1cdc8)}
Diff:
--- Expected
+++ Actual
@@ -2,3 +2,3 @@
(*stackitem.ByteArray)((len=8) {
- 00000000 66 69 6e 64 6b 65 79 31 |findkey1|
+ 00000000 66 69 6e 64 6b 65 79 32 |findkey2|
}),
Test: TestComlileAndInvokeFunction/test_Storage.Find/keys_only
--- FAIL: TestComlileAndInvokeFunction/test_Storage.Find/both (0.01s)
contract_test.go:881:
Error Trace: /home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/contract_test.go:881
Error: Not equal:
expected: []stackitem.Item{(*stackitem.ByteArray)(0xc000515920), (*stackitem.ByteArray)(0xc000515938)}
actual : []stackitem.Item{(*stackitem.ByteArray)(0xc000515848), (*stackitem.ByteArray)(0xc000515860)}
Diff:
--- Expected
+++ Actual
@@ -2,3 +2,3 @@
(*stackitem.ByteArray)((len=8) {
- 00000000 66 69 6e 64 6b 65 79 31 |findkey1|
+ 00000000 66 69 6e 64 6b 65 79 32 |findkey2|
}),
Test: TestComlileAndInvokeFunction/test_Storage.Find/both
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
