If `config-path` is not passed, default configs are used according to
the set network. In VM CLI the default privnet config with InMemory db
is used.
Close#3450Close#3459
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Do not use the updated contract state from native Management to perform
permissions checks. We need to use the currently executing state
instead got from the currently executing VM context until context is
unloaded.
Close#3471.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Always return "Target transaction accepted" error if the target transation was
either accepted by the moment of command run or during the command
handling. Exit with code 1 in both cases. Adjust TestAwaitUtilCancelTx
correspondingly, allow both cases in test. Simplify the test along the
way, remove useless code.
Close#3365.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
To prevent `Expired transaction (-510) - transaction has expired:
ValidUntilBlock = 8, current height = 8` VUB have been increased.
Close#3343
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Occasionally the block is being accepted right after main transaction
submission. Added two branches into this TestAwaitUtilCancelTx. One
branch handles the case of original transaction acceptance, the
other branch handles the conflicting transaction acceptance.
Close#3365
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
And refactor some code a bit, don't use bytes.Clone where type-specific
helpers may be used instead.
Close#2907.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Revert 5f6c01336c, remove all multierror
related nolint comments and use multierror wrapping instead.
Close#2906.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
`wallet1_solo.json` can't be used in this test because it contains
committee member that receives reward for accepted blocks. The race in
this test happens due to the fact that it uses running blockchain and
checks expected GAS balance via call to blockchain's
GetUtilityTokenBalance API. This call is racy with the CLI command
executed prior to the call which causes the following test failure:
```
2023-04-06T08:44:08.6038406Z === NAME TestNEP17Balance/all_accounts
2023-04-06T08:44:08.6038738Z executor.go:240:
2023-04-06T08:44:08.6039454Z Error Trace: /opt/github-runner/_work/neo-go/neo-go/cli/nep_test/executor.go:240
2023-04-06T08:44:08.6040628Z /opt/github-runner/_work/neo-go/neo-go/cli/nep_test/executor.go:236
2023-04-06T08:44:08.6041787Z /opt/github-runner/_work/neo-go/neo-go/cli/nep_test/nep17_test.go:73
2023-04-06T08:44:08.6042389Z Error: Expect " Amount : 1" to match "^\s*Amount\s*:\s*1.5$"
2023-04-06T08:44:08.6042865Z Test: TestNEP17Balance/all_accounts
```
The fix is do not use committee accounts for balance checks. Let's use
side accounts and transfer funds to some of them before the test start.
Close#2960.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
It contains several simple signature accounts that are not related to
network committee or validators. Needed for tests, existing
`testwallet.json` can't de reused since some tests need testing wallet
with a single account.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Previously user should Start server in a separate goroutine. Now
separate goroutine is created inside the Start(). For normal server
operation, the caller should wait for Start to finish. Also, fixed
TestTryInitStateSync test which was exiting earlier than logs are
called.
Close#3112
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Add exit function at the end of the test to prevent
errors in t.Cleanup of the t.TempDir for levelDB instance.
Close#3154
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Needs to updated dependencies inside the test for go1.18 and higher to
match with interop module.
Close#3152
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Fix VM test for windows. We don't have notary enabled in unit testchains
so it was removed.
Close#3309
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
We have a full list of public keys in the import-multisig command, so if
we have a key in the wallet that corresponds to one of these keys
(simple sig), just reuse it for the account automatically
Closes#3266
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Autogenerated RPC wrapper used underscores to differentiate between
methods/event overloads. Now it adds increasing suffices instead.
Close#3296
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
New --await flag is an option to synchronize on transaction execution
for CLI commands.
Closes#3244
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
If main transaction is known, then conflicting transaction shouldn't be
valid longer than the main one.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
The text must appear as the first line of a properly formatted Go //
comment, and that comment must appear before but not be attached to the
package clause and before any /* */ comment.
Closes#3254
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
No functional changes.
We have 2 exactly the same cycles,and in the 1st cycle we set
cosignersOffset to the right value. So we don't need to check for arg ==
cmdargs.CosignersSeparator one more time.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Move actor handling into CLI package.
GetRPCWithActor returns RPC with actor instances.
Close#2682.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Move GetAccFromContext, GetUnlockedAccount, ReadWalletConfig handling
into options package to reuse this code from all CLI handlers.
getDecryptedAccount is replaced by GetUnlockedAccount.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
CLI side method for canceling not yet accepted transaction. It's
alternative to unsupported `canceltransaction` RPC method.
Close#3151.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
To be able running the node from any working directory by simply
pointing the relative-path as prefix for relative parameters set in
config.
Closes#3179.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Manifest will be a part of the state.Contract which will be checked on its
way to the storage. Tiny optimisation which allows not to serialize manifest
twice. Ref. https://github.com/nspcc-dev/neo-go/pull/3218#discussion_r1402374232.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Otherwise it's undertermined which of two unnamed structures will get "Unnamed"
and "UnnamedX" which can break the test from time to time.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
Type data is added while walking through function ins/outs even if we're to
throw this function away. But we don't need it, these types are not used, so
we can deal with the main part of #3071 by optimizing this out.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
TestAssistedRPCBindings didn't respect rewriteExpectedOutputs setting, with
this behavior compiler could produce any result and the test wouldn't notice.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
Network server constructor reads config.Version variable, and
testcli.DeployContract writes dummy config.Version which causes
race in tests. Avoid this race by moving config.Version initialisation
to a separate package and perform it inside test packages init().
Close#3011, close#3017.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
RPC binding config may be malformed or the source .go contract may contain
structures like this:
```
type Str struct {
Field int
field int
}
```
We need to recognise these cases and return error. otherwise the resulting
binding can't be compiled.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
It helps us to keep the index clean and ordered. When some new RPC binding
test should be added, we don't need to search for a suitable place for it.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Perform private -> public transformation at the last step of RPC binding
generation so that it works not only with NeoGo contracts, but with any
other contracts.
Close#3083.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
And simplify atomic service value stored by RPC server. Oracle service can
either be an untyped nil or be the proper non-nil *oracle.Oracle.
Otherwise `submitoracleresponse` RPC handler doesn't work properly.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
In this case emitted event parameters should match from invocation to
invocation. It's an error otherwise (and if the type is not Any).
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Currently we have problems with unnamed structs used as a parameter for
notifications, because there's no one-to-one correspondence between
notification parameter and the list of extended types used by the whole
contract. Otherwise eventtypes guessing works OK.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
config_extended.yml contains an example of user-defined configuration
file with extended event types. User-defined event types are allowed
to be named and complicated, i.e. properly support extended types
notation.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Unfortunately, without pre-set user extended types configuration for events
and without --guess-eventtypes flag set we are allowed to rely only on manifest
information about types. Manifest can't give us a lot of information, but we
still need to be able to generate RPC binding. Arrays and structs are correctly
handled by the current code, but maps always rely on the fact that map's value
type is set. It's not true in the described case, so make the maps type convertor
handle this situation in a similar way how arrays are handled.
Without this commit the following panic occurs on attempt to generate RPC binding:
```
--- FAIL: TestAssistedRPCBindings/testdata/notifications (0.01s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7f7c0e]
goroutine 190 [running]:
testing.tRunner.func1.2({0x109cb40, 0x1d58760})
/usr/local/go/src/testing/testing.go:1396 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1399 +0x39f
panic({0x109cb40, 0x1d58760})
/usr/local/go/src/runtime/panic.go:884 +0x212
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.extendedTypeToGo({0x22, {0x0, 0x0}, {0x0, 0x0}, 0x0, 0x0, {0x0, 0x0, 0x0}}, ...)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:515 +0x36e
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.scTypeToGo({0xc000206d92?, 0xc000206d80?}, 0x22, 0xc0005d70e0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:643 +0x138
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.scTemplateToRPC({{0xc00049bb07, 0x7}, 0xc0004c89c0, {0x33, 0x22, 0x11, 0x0, 0xff, 0xee, 0xdd, ...}, ...}, ...)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:686 +0xbc4
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.Generate({{0xc00049bb07, 0x7}, 0xc0004c89c0, {0x33, 0x22, 0x11, 0x0, 0xff, 0xee, 0xdd, ...}, ...})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:421 +0x387
github.com/nspcc-dev/neo-go/cli/smartcontract.contractGenerateSomething(0xc00043e2c0, 0x137cd00)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate.go:99 +0x855
github.com/nspcc-dev/neo-go/cli/smartcontract.contractGenerateRPCWrapper(0xc00043e2c0?)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate.go:60 +0x25
github.com/urfave/cli.HandleAction({0x1048380?, 0x137c660?}, 0x13?)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:524 +0x50
github.com/urfave/cli.Command.Run({{0x123539d, 0x13}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x12577ad, 0x2a}, {0x127ad35, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:173 +0x65b
github.com/urfave/cli.(*App).RunAsSubcommand(0xc0001f4000, 0xc00043e000)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:405 +0x91b
github.com/urfave/cli.Command.startApp({{0x12281e1, 0x8}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x1254d8a, 0x28}, {0x0, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:372 +0x6e7
github.com/urfave/cli.Command.Run({{0x12281e1, 0x8}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x1254d8a, 0x28}, {0x0, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:102 +0x825
github.com/urfave/cli.(*App).Run(0xc00024e000, {0xc0004f6420, 0xb, 0xb})
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:277 +0x8a7
github.com/nspcc-dev/neo-go/cli/smartcontract.TestAssistedRPCBindings.func1.1(0x9f8829?)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate_test.go:395 +0x5fc
testing.tRunner(0xc0006824e0, 0xc0004a3680)
/usr/local/go/src/testing/testing.go:1446 +0x10b
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1493 +0x35f
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
There are two ways of doing this: first one is to emit all notifications
parameter data into rpcbindings configuration on compile time (event if
the parameter has a simple type), and the second one is to fetch parameter
type from the manifest on rpcbinding file generation if needed (we always
have manifest at this stage, thus it's not a problem to retrieve necessary
information). The latter case is chosen to reduce the bindings configuration
file size.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Notification and its parameters may have any UTF8-compatible name
which is inappropriate for bindings configuration and for the resulting
RPC bindings file. This commit stores the prettified version of
notification's name and parameters that are ready to be used in the
resulting RPC binding without any changes.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
The user should specify it via parameter's `extendedtype` field and
via upper-level `namedtypes` field of the contract configuration YAML.
Also, as we have proper event structure source, make the `--guess-eventtype`
compilation option and make event types guess optional.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
New rule for writing blocks of code to our template: new line before
the block starts and new line after the block ends. This rule is the
same as the one we use during manual typing.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Properly load the provided method using NEF and hash specified. It allows
to have NEF properly set in the VM context and handle CALLT instruction
correctly.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
It's enough to specify the input file only to get the standard output:
```
$ neo-go contract compile -i ./1-print/1-print.go
$ neo-go contract compile -i ./1-print/
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
