Do not wait until wsReader routine gracefully finishes its work before
WS connection close. Instead, firstly close the connection, and after
that wait for proper wsReader exit.
It's a harsh way, but I don't have any other options to try, because
wsReader routine hangs on `ws.ReadMessage()` operation for more than
ReadDeadline (more than 5 seconds) during test cleanup which results in
the test timeout.
Close#3378.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Close#2956. The failure reason is similar to the one described in #3396
for TestNotary: Blockchain's notificationDispatcher is listening to
block events from storeBlock via separate channel. By the moment single
block addition is finished, notification may or may not be properly
handled by notificationDispatcher, especially given the fact that our
runners are slow. As a result, assert.Eventually with 1-second awaiting
period may fail. This issue is solved by adding one more block, because
the second AddBlock finishes only when it sends block addition event to
notificationDispatcher loop, which means that the previous event was
handled.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
1. Allow 1-block slippage for multisignature request block generation to
ensure that PostPersist for fb's NVB-th block is properly finished.
2. Allow 1-block slippage before sent request checks to ensure that
PostPersist for NVB fb's NVB-th block was finished and all
stale mains were properly marked by Notary service.
Overall, this commits ports the approach of #3390 to the whole test.
Close#3366.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Made connections in parallel to check the limit and attempt to make one
more connection beyond the limit. Only "default" test case is failing,
because default number of connections is 64 (quite large for slow
runners). The failure reason is:
* given ~1 second for [dealing + request] per connection (time is taken
from the test log)
* by the moment 65-th connection is reached, some connections from the
start of the test have died due to inactivity (this process literally
takes 1 minute)
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
1. Replace isFinished atomic variable with a channel, no functional changes
here, just use more common way as all our services do.
2. Do not check erors from SetReadDeadline and ReadMessage on exit. It
seems to be not quite right because connection is not closed by this
moment, and thus, these error checks are racy.
3. Add read timeout for the message reader. It is needed because some
tests may leave message unread in the end which results in hanging
test cleanup.
4. Add drain loop to message reader in order not to block WS reader on
sending message.
Ref. https://github.com/nspcc-dev/neo-go/pull/3392#issuecomment-2031590403.
It's clear that TestBadSubUnsub is hanging on test cleanup, in
particular, on attempt to wait for wsRead routine to exit. The only
place where wsRead routine may hang is sending to msgCh in case if
receiver is not going to read from this channel:
```
2024-04-02T08:14:51.4957621Z goroutine 14329 [chan receive]:
2024-04-02T08:14:51.4958010Z github.com/nspcc-dev/neo-go/pkg/services/rpcsrv.initCleanServerAndWSClient.func1()
2024-04-02T08:14:51.4958344Z D:/a/neo-go/neo-go/pkg/services/rpcsrv/subscription_test.go:80 +0x71
2024-04-02T08:14:51.4958457Z testing.(*common).Cleanup.func1()
2024-04-02T08:14:51.4958757Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1175 +0x17a
2024-04-02T08:14:51.4958903Z testing.(*common).runCleanup(0xc002cf5860, 0x0)
2024-04-02T08:14:51.4959193Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1353 +0x262
2024-04-02T08:14:51.4959291Z testing.tRunner.func2()
2024-04-02T08:14:51.4959566Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1683 +0x51
2024-04-02T08:14:51.4959695Z testing.tRunner(0xc002cf5860, 0x141687410)
2024-04-02T08:14:51.4959976Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1695 +0x25e
2024-04-02T08:14:51.4960115Z created by testing.(*T).Run in goroutine 1
2024-04-02T08:14:51.4960385Z C:/hostedtoolcache/windows/go/1.22.1/x64/src/testing/testing.go:1742 +0x826
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Previously findstorage returns null for the results key if a contract
state is not found. C# returns an empty list.
Close#3370
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Close#3366. Roll back the test structure to the one that it has before
d2a7162217. Add one extra block to ensure
that main transaction won't be finilized. Add NVB increment slippage to
avoid race between the first fallback acceptance and block acceptance.
Add NVB increment slippage to the rest of fallbacks for test structure
unification.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Add error channel to prevent data race in the test.
Increase waiting interval for subscriptions awaiting up to 2 seconds.
Failing is caused by slow subscriptions.
Close#2958
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Default http.Client and http.Transport can be really slow. Also on
windows Timeout: time.Second was not enough. Probably network related
issue. As mentioned in https://github
.com/nspcc-dev/neo-go/issues/2975#issuecomment-1750523651 forcely use
only tcp4 and FallbackDelay: -1. This made TestRPC little bit faster so
gh windows runner can manage it without timeout or POST request fails.
Close#2975Close#3314
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
This is not the way intended in https://github.com/neo-project/proposals/pull/156.
-511 covers _both_ cases because users hardly can distinguish one from another,
it's just that our mempool implementation has error codes for both..
Signed-off-by: Roman Khimov <roman@nspcc.ru>
mempool.ErrInsufficientFunds is used when sender doesn't have enough
balance to pay the submitted transaction fees (-511 code according to
https://github.com/neo-project/proposals/pull/156). mempool.ErrConflict is
used when sender is not able to pay the overall transactions fee sum in
the pool (generic -500 error according to the proposal).
This bugfix is kind of breaking change for those users who relied on the
old -511 code previously returning "insufficient funds" error.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Shouldn't affect things much, yet at the same time we no longer need any
connection after we're done with the request.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
The theory is:
* we add a block
* it triggers notary
* which can process the fallback before we're to setFinalizeWithError
* it'll fail and require an additional block to enter, but it's never added
* FAIL
The solution is:
* always add an additional block, but treat the first fb specially
Signed-off-by: Roman Khimov <roman@nspcc.ru>
And refactor some code a bit, don't use bytes.Clone where type-specific
helpers may be used instead.
Close#2907.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Revert 5f6c01336c, remove all multierror
related nolint comments and use multierror wrapping instead.
Close#2906.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
We have smartcontract.ParameterPair structure that can be properly
marshalled and passed to RPC server as an element of smartcontract.Map
structure. However, RPC server can't unmarshal map values properly
without this change.
This change is compatible with C# node.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Added sync logs for every service separately to provide the ability to
have a custom logger for each service. This commit makes the code follow
the zap usages rules: `Sync calls the underlying Core's Sync method,
flushing any buffered log entries. Applications should take care to
call Sync before exiting.`
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Start of some services is bound to blockchain subscriptions, and thus,
can't be run before the blockchain notifications dispatcher.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Previously user should Start server in a separate goroutine. Now
separate goroutine is created inside the Start(). For normal server
operation, the caller should wait for Start to finish. Also, fixed
TestTryInitStateSync test which was exiting earlier than logs are
called.
Close#3112
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Let the user know whether it's main or fallback transaction that failed
to be relayed to the network.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Try to subscribe for headers firstly, and then if RPC server doesn't
have this ability, fallback to block subscriptions to manage transaction
awaiting.
Close#3260.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
BlockFilter has PrinaryIndex of int type while block.Block structure
itself has PrimaryIndex of byte. It's needed to prevent changing
filters field type and all associated subscriptions logic on
server side.
Refs #3241.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
New event is to notify the user about header's content by the moment
when block is stored (which happens after block's processing). This is
needed for proper Waiter work.
Closes#2751.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Add new filter NotaryRequestFilter, support for filtering
NotaryRequestEvents by mempoolevent.Type
(added or removed).
Closes#2425.
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
Perform initialisation of StateRoot service with designated
StateValidator's node list in the service constructor. There's no need
to wait until the next role update event, and it may lead to inaccuraces
in service work on SIGHUP/server restart.
A part of #3228.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Initialise services dependant on roles designation based on N+1
block so that Genesis roles extension work properly. There's not
much sence to fetch node roles information for the latest persisted
block because Designation contract itself makes designated nodes
responsible since the next subsequent block.
A part of #3228.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
