Some commands don't accept arguments, but users try giving them and don't
notice a mistake. It's a bit more user-friendly to tell the user that there is
something wrong with the way he tries to use the command.
It has a stub for SIGHUP, but doesn't have anything for USR1 and USR2:
Error: cli\server\server.go:520:31: undefined: syscall.SIGUSR1
Error: cli\server\server.go:521:31: undefined: syscall.SIGUSR2
Error: cli\server\server.go:565:17: undefined: syscall.SIGUSR1
Error: cli\server\server.go:608:17: undefined: syscall.SIGUSR2
Which allows to enable/disable the service, change nodes, keys and other
settings. Unfortunately, atomic.Value doesn't allow Store(nil), so we have to
store a pointer there that can point to nil interface.
Turns out, our getnextvalidators implementation already works the way
getcandidates is supposed to work, but original getnextvalidators works a bit
differently. It only returns validators, it doesn't return Active flag (all
of them are active) and it represents votes as a number. So for the maximum
compatibility:
* drop non-validator keys from getnextvalidators server-side
* drop Active flag client-side (sorry, it doesn't exist)
* allow unmarshalling old answers along with the new one
This technically breaks `query candidates` CLI command, but it'll be fixed
when getcandidates are to be introduced.
https://github.com/nspcc-dev/neo-go/pull/2435 breaks compatibility
between newer RPC clients and older RPC servers with the following
error:
```
failed to get network magic: json: cannot unmarshal string into Go struct field Protocol.protocol.initialgasdistribution of type int64
```
This behaviour is expected, but we can't allow this radical change.
Thus, the following solution is implemented:
1. RPC server responds with proper non-stringified
InitialGasDistribution value. The value represents an integral
of fixed8 multiplied by the decimals.
2. RPC client is able to distinguish older and newer responses. For
older one the stringified value without decimals part is
expected. For newer responses the int64 value with decimal part
is expected.
The cludge will be present in the code for a while until nodes of
version <=0.98.3 become completely absolete.
Old help message is misleading a bit:
```
OPTIONS:
--verbose, -v Output full tx info and execution logs
--rpc-endpoint value, -r value RPC node address
--timeout value, -s value Timeout for the operation (10 seconds by default) (default: 0s)
```
The new one:
```
OPTIONS:
--verbose, -v Output full tx info and execution logs
--rpc-endpoint value, -r value RPC node address
--timeout value, -s value Timeout for the operation (default: 10s)
```
Note explicitly that transaction hash should be specified, so instead of
an old help text:
```
$ ./bin/neo-go query tx --help
NAME:
neo-go query tx - Query transaction status
USAGE:
neo-go query tx [command options] [arguments...]
OPTIONS:
--verbose, -v Output full tx info and execution logs
--rpc-endpoint value, -r value RPC node address
--timeout value, -s value Timeout for the operation (10 seconds by default) (default: 0s)
```
now we got the more informative one:
```
$ ./bin/neo-go query tx --help
NAME:
neo-go query tx - Query transaction status
USAGE:
neo-go query tx <hash> -r endpoint [-v]
OPTIONS:
--verbose, -v Output full tx info and execution logs
--rpc-endpoint value, -r value RPC node address
--timeout value, -s value Timeout for the operation (10 seconds by default) (default: 0s)
```
1. Keep initDone check only for the places where cache is directly accessed.
We don't need to check it in other places, otherwise we have a mess of
duplicating checks.
2. Fix bug in code related to block deserialisation. There's no magic, so
checking that initialisation is done is not enough for proper block
deserialisation. We need to manually fill StateRootEnabled field.
3. Since transaction doesn't need network magic to compute its hash, we don't
need to perform Client initialisation before transaction-related requests.
4. Check that cache is initialised before accessing network magic.
5. Refactor the way Policy contract hash is fetched for Client requests.
We don't really need Client initialisation for that, it's OK to fetch Policy
hash on-the-fly.
Currently we can't properly stop running server on Windows and SIGHUP
is also not supported. This leads to occupied resources and failed
test cleanup:
```
--- FAIL: TestServerStart (0.35s)
--- FAIL: TestServerStart/good (0.10s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_good337747932\001\neogotestchain\000001.log:
The process cannot access the file because it is being used by another process.
2022-02-08T14:11:20.959+0300 INFO persisted to disk {"blocks": 0, "keys": 112, "headerHeight": 0, "blockHeight": 0, "took": "10.0049ms"}
```
Blockchain occupies resources (e.g. it opens log files for DB, etc.)
on creation and running. We need to release these resources if something
goes wrong during execution chain-related commands.
This commit solves the following problem on Windows:
```
--- FAIL: TestServerStart (0.32s)
--- FAIL: TestServerStart/stateroot_service_is_on_&&_StateRootInHeader=true (0.04s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_stateroot_service_is_on_&&_StateRootInHeader=true460557297\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
--- FAIL: TestServerStart/invalid_Oracle_config (0.03s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_invalid_Oracle_config810064028\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
--- FAIL: TestServerStart/invalid_consensus_config (0.04s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_invalid_consensus_config217270091\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
--- FAIL: TestServerStart/invalid_Notary_config (0.07s)
--- FAIL: TestServerStart/invalid_Notary_config/malformed_config (0.04s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_invalid_Notary_config_malformed_config754934830\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
--- FAIL: TestServerStart/invalid_Notary_config/invalid_wallet (0.03s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_invalid_Notary_config_invalid_wallet934249397\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
--- FAIL: TestServerStart/good (0.11s)
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestServerStart_good596150160\001\neogotestchain\000001.log: The process cannot access the file because it is being used by another process.
```
This commit also unifies blockchain and services releasing code.
zap never closes open sinks except its own tests. This behaviour
prevents TestHandleLoggingParams from successful cleanup because
temp log output file can't be closed due to the following error:
```
TempDir RemoveAll cleanup: remove C:\\Users\\Anna\\AppData\\Local\\Temp\\TestHandleLoggingParams_debug5796883
33\\001\\file.log: The process cannot access the file because it is being used by another process.
```
So this tremendous cludge is made mosetly for our testing code.
It is not for concurrent usage (we don't have cases of
multithreaded access to logger output sink).
Notice that it makes the node accept Extensible payloads with any category
which is the same way C# node works. We're trusting Extensible senders,
improper payloads are harmless until they DoS the network, but we have some
protections against that too (and spamming with proper category doesn't differ
a lot).
Unfortunately, testing this code is not possible without an additional wrapper
in `input`, but adding it just to test this seems to be too excessive. Fixes
Problem:
```
--- FAIL: TestDumpDB (0.08s)
--- FAIL: TestDumpDB/too_low_chain
testing.go:894: TempDir RemoveAll cleanup: remove C:\Users\Anna\AppData\Local\Temp\TestDumpDB_too_low_chain357310492\001\chains\privnet\000001.log: The process cannot access the file because it is being used by another process.
```
Solution:
Release resources occupied by the chain even on non-error command exit.
Problem:
```
--- FAIL: TestHandleLoggingParams (0.02s)
--- FAIL: TestHandleLoggingParams/default (0.00s)
server_test.go:51:
Error Trace: server_test.go:51
Error: Received unexpected error:
couldn't open sink "C:\\Users\\Anna\\AppData\\Local\\Temp\\TestHandleLoggingParams226652490\\001/file.log": no sink found for scheme "c"
Test: TestHandleLoggingParams/default
--- FAIL: TestHandleLoggingParams/debug (0.00s)
server_test.go:64:
Error Trace: server_test.go:64
Error: Received unexpected error:
couldn't open sink "C:\\Users\\Anna\\AppData\\Local\\Temp\\TestHandleLoggingParams226652490\\001/file.log": no sink found for scheme "c"
Test: TestHandleLoggingParams/debug
```
Solution:
Currently no solution is implemented, but we can use relative paths instead of absolute.
We use 2 prefixes for storing items because of state synchronization.
This commit allows to parametrize dao with the default prefix.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
It doesn't trigger the problem fixed in the previous commit because here
CreateTxFromScript is used with pre-calculated GAS value from InvokeFunction
and thus it's not performing invocation. Still, it's a nice test extension.
Standards are NEP-11 and NEP-17, not NEP11, not NEP17, not anything
else. Variable/function names of course can use whatever fits, but documents
and comments should be consistent wrt this.
CLI:
* Typos are fixed
* Documentation on NEP-11 tokens is added
* NeoGo node configuration is moved to a separate file
Compiler:
* Typos and indentations are fixed
* Ops dump example is updated
Consensus:
* Typos are fixed
* Links are fixed
Notifications:
* Minor adjustments
RPC:
* `getversion` response is updated
* `getunclamedgas` comment is removed (not valid since
https://github.com/neo-project/neo-modules/pull/243)
VM:
* Update help message
* `load*` command adjustments
* `astack` command removal
Provide cosigners explicitly during deploy and don't read wallet twice.
This is needed because manifest validation requires valid sender address.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
If wallet size decreases, we need to remove trailing garbage if it
exists. This can happen when removing account or reading pretty-printed
wallet. It doesn't affect our CLI (we decode only file prefix), but
it is nice to always have a valid JSON file.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Implement a way to check if tx has been persisted on blockchain and
to get general info about transaction. Much more convenient than
handwritten curl queries.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Sometimes on-chain invocations need a bit more GAS than expected after test
invocations, so let the user compensate for that. 2.x has similar option since
483fefbb62.
On many occassions we can determine at compile-time if contract config lacks
some properties it needs. This includes all native contract invocations
through stdlib, as both hashes and methods are known at compile-time
there.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
Problem:
```
executor_test.go:151:
Error Trace: executor_test.go:151
executor_test.go:147
nep11_test.go:232
Error: Expect "{"name":"HASHY 3HNCEX8D9J0p\u002BLxmr3uPhOhSW90="}" to match "{"name":"HASHY 3HNCEX8D9J0p+Lxmr3uPhOhSW90="}"
Test: TestNEP11_OwnerOf_BalanceOf_Transfer
```
Solution:
Same as preesnted in #2006.
Base58 does not preserve one-to-one byte correspondence with the
original data, so different combinations of the same number of bytes
might have different encoded string length. We use GAS transfer to mint
HASHY token, where the token hash is Base58Encode(Ripemd160(data + txHash)).
The problem is that `invokescript` RPC call is used to define transfer tx
sysfee, thus, txHash during testinvoke differs from the actual one, that's
why resulting token ID may have different length during testinvoke and
real invoke. As far as we use token ID as a key to store contract
values, the storage price may also differ. The result is failing
TestNEP11_OwnerOf_BalanceOf_Transfer test due to `gas limit exceeded`
error:
```
logger.go:130: 2021-06-10T21:09:08.984+0300 WARN contract invocation failed {"tx": "45a0220b19725eaa0a4d01fa7a6cdaac8498592e8f3b43bdde27aae7d9ecf635", "block": 5, "error": "error encountered at instruction 36 (SYSCALL): error during call from native: error encountered at instruction 22 (SYSCALL): failed to invoke syscall 1736177434: gas limit exceeded"}
executor_test.go:219:
Error Trace: executor_test.go:219
nep11_test.go:132
nep11_test.go:235
Error: Not equal:
expected: 0x2
actual : 0x4
Test: TestNEP11_OwnerOf_BalanceOf_Transfer
```
Fixed by using base64 instead of base58 (base64 preserves the resulting
encoded string length for the same input length).
Create local variables as they are needed and remove `INITSLOT`
if there were no locals. This helps to eliminate a whole class
of bugs when calculated and real amount mismatched.
cli/wallet/wallet.go:527:19: Error return value of `cli.NewExitError` is not checked (errcheck)
cli.NewExitError("valid account address must be provided", 1)
We have a lot of common code which is shared between `smartcontract` and
`wallet` cli packages. It's convinient to keep it in a separate helper
package in order to avoid functional cli packages dependencies.
We have a set of accounts provided via `cosigners` argument, so we
should fill all transaction witnesses in (not only sender's witness).
If we can't properly construct witnesses for all of the signers then an
error should be returned.
1. `System.Contract.CallNative` expects version on stack.
2. Actual method is determined based on current
instruction pointer.
3. Native hashes don't longer depend on NEF checksum.
But don't change the way we process/store transactions and blocks. Effectively
it's just an interface for smart contracts that replaces old syscalls.
Transaction definition is moved temporarily to runtime package and Block
definition is removed (till we solve #1691 properly).
1. Initialization is performed via `Blockchain` methods.
2. Native Oracle contract updates list of oracle nodes
and in-fly requests in `PostPersist`.
3. RPC uses Oracle module directly.
It's a bit easier to use. Previously we couldn't have it because it was used
for '--mainnet', but we no longer specify the network, so it can be used for
'--manifest'.
Address identification must have a priority, another token can have this
address in its name, but when there is a hash specified we should take the one
with proper hash.
