Some clients need more flexible awaiting options (e.g. for short-blocks
networks). The default behaviour is not changed, all exported APIs are
compatible. Ref. https://github.com/nspcc-dev/neofs-node/issues/2864.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
pollTime is never 0 since MillisecondsPerBlock protocol configuration value
is present in `getversion` RPC response since 0.97.3 release. We don't have such
old RPC servers in the network anymore, thus this fallback code may be
safely removed.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Test coverage is automatically enabled when go test is running with coverage
enabled. It can be disabled for any Executor by using relevant methods.
Coverage is gathered by capturing VM OPs during test contract execution and
mapping them to the contract source code using the DebugInfo information.
Signed-off-by: Slava0135 <super.novalskiy_0135@inbox.ru>
Linter is updated up to v1.60.1, the following issue is fixed:
```
predeclared variable max has same name as predeclared identifier
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
64 connections is too much for slow GA runners, we have to keep all of
them alive to avoid failures in the test, but it's impossible since
runners are too slow to iterate through all of them in time.
Close#3442.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
1. Bind NewDeployTxBy to Executor to be able to use
(*Executor).AddSystemFee.
2. Replace pre-defined constant deployment fee by calculated one.
This change is needed to be able to properly collect coverage for
_deploy method of a contract via neotest coverage. Ref.
https://github.com/nspcc-dev/neo-go/pull/3462#pullrequestreview-2229601870.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Starting from b10af1ed31
(*WildPermissionDescs).Add method's call is not enough to construct a
proper restricted permission descriptor, because Wildcard field should
be set properly at the same time. Ref. #3523.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Metrics should be updated once per action, currently removeInternal is
used by Add and Remove, the first one updates them in the end anyway and
remove should do the same.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
`makeWsRequest` creates a channel for response and waits for it. If between
creating the channel and starting the reading `select` connection is lost
(`writerDone` channel is closed), nothing reads from the channel and a
deadlock appears. Looking at "done" channels when transferring RPC data
solves the issue. Closes#3530.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
This is a bad one.
$ ./bin/neo-go contract testinvokefunction -r https://rpc10.n3.nspcc.ru:10331 0xda65b600f7124ce6c79950c1772a36403104f2be getBlock 5762000
{
"state": "HALT",
"gasconsumed": "202812",
"script": "AtDrVwARwB8MCGdldEJsb2NrDBS+8gQxQDYqd8FQmcfmTBL3ALZl2kFifVtS",
"stack": [
{
"type": "Array",
"value": [
{
"type": "ByteString",
"value": "vq5IPTPEDRhz0JA4cQKIa6/o97pnJt/HfVkDRknd1rg="
},
{
"type": "Integer",
"value": "0"
},
{
"type": "ByteString",
"value": "zFYF3LGaTKdbqVX99shaBUzTq9YjXb0jaPMjk2jdSP4="
},
{
"type": "ByteString",
"value": "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA="
},
{
"type": "Integer",
"value": "1722060076994"
},
{
"type": "Integer",
"value": "5293295626238767595"
},
{
"type": "Integer",
"value": "5762000"
},
{
"type": "ByteString",
"value": "LIt05Fpxhl/kXMX3EAGIASyOSQs="
},
{
"type": "Integer",
"value": "0"
}
]
}
],
"exception": null,
"notifications": []
}
$ ./bin/neo-go contract testinvokefunction -r http://seed3.neo.org:10332 0xda65b600f7124ce6c79950c1772a36403104f2be getBlock 5762000
{
"state": "HALT",
"gasconsumed": "202812",
"script": "AtDrVwARwB8MCGdldEJsb2NrDBS+8gQxQDYqd8FQmcfmTBL3ALZl2kFifVtS",
"stack": [
{
"type": "Array",
"value": [
{
"type": "ByteString",
"value": "vq5IPTPEDRhz0JA4cQKIa6/o97pnJt/HfVkDRknd1rg="
},
{
"type": "Integer",
"value": "0"
},
{
"type": "ByteString",
"value": "zFYF3LGaTKdbqVX99shaBUzTq9YjXb0jaPMjk2jdSP4="
},
{
"type": "ByteString",
"value": "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA="
},
{
"type": "Integer",
"value": "1722060076994"
},
{
"type": "Integer",
"value": "5293295626238767595"
},
{
"type": "Integer",
"value": "5762000"
},
{
"type": "Integer",
"value": "6"
},
{
"type": "ByteString",
"value": "LIt05Fpxhl/kXMX3EAGIASyOSQs="
},
{
"type": "Integer",
"value": "0"
}
]
}
],
"exception": null,
"notifications": []
}
9 fields vs 10, notice the primary index right after the block number.
Back when ac527650eb initially added Ledger I've
used https://github.com/neo-project/neo/pull/2215 as a reference and it was
correct (no primary index). But then https://github.com/neo-project/neo/pull/2296
came into the C# codebase and while it looked like a pure refactoring it
actually did add the primary index as well and this wasn't noticed. It wasn't
noticed even when 3a4e0caeb8 had touched some
nearby code. In short, we had a completely wrong implementation of this call
for more than three years. But looks like it's not a very popular one.
Signed-off-by: Roman Khimov <roman@nspcc.ru>
Every client's (Un)Subscription call does two things: an RPC call and a
subscription map lock (two of maps currently). If we imagine that there is
one routine that tries to subscribe (A) and one routine that tries to
unsubscribe (B), the following sequence can happen:
0. Current number of subscriptions is X
1. B does an RPC and makes number of subscriptions X-1
2. A does an RPC and makes number of subscriptions X again
3. A holds subscription locks and rewrites client's subscription state
(subscription with ID X now points to a different channel; channel that
was registered by B is lost and is not related to any real subscription
but is still included in the `receivers` map)
4. B holds subscription locks and drops subscription X (first, it is an
error and we have just lost a subscription that we think was made
successfully second, we have lost a channel in the `receivers` map, and
no corresponding subscription points to it)
5. X subscription is received by the WS client (in practice it is a new
block, 100ms, quite often to be sure this issue happens every hour), we
range through the receivers, see no corresponding subscription, and
panic.
Closes#3093.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Refs. #3522. The core problem is the same as for groups/features: we can't
allow empty trusts when they're unmarshalled from JSON. But unlike others we
can't easily differentiate missing any value with other cases because the
default value for WildPermissionDescs is a valid thing. Adding an additional
field makes it invalid and we can build around it. Other options are
implementing custom UnmarshalJSON for Manifest (too much for this) or making
Trusts a pointer (an option, but can fail in too many ways).
Signed-off-by: Roman Khimov <roman@nspcc.ru>
It's needed to give user a hint about what's wrong with the witness
during `calculatenetworkfee` RPC request processing.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
This code was accidentally removed by
https://github.com/nspcc-dev/neo-go/pull/3477, it's important to have
these fields set by default.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
This commit adds a single test that covers the
previously uncovered branch in the mptdata
decoding algorithm.
Signed-off-by: Furetur <furetur@gmail.com>
It should be sufficient to retrieve next block validators once per
updateExtensibleWhitelist call and then reuse this value. `nextVals`
copy intentionally omitted since the only change that
smartcontract.CreateDefaultMultiSigRedeemScript performs over the
`nextVals` list is sorting.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Refs #3415
This commit introduces a small new change
that implements the Hooks API and more
specifically the OnExecHook. This feature
can be used to implement test coverage
collection, tracing, breakpoints, and etc.
To be more specific, this commit:
1. adds a new `hooks` field to the `VM`
(this field contains the OnExecHook
function)
2. sets the default value of this hook
to be a NOP function
3. adds the `VM.SetOnExecHook` method
Signed-off-by: Furetur <furetur@gmail.com>
If `config-path` is not passed, default configs are used according to
the set network. In VM CLI the default privnet config with InMemory db
is used.
Close#3450Close#3459
Signed-off-by: Ekaterina Pavlova <ekt@morphbits.io>
