Lack of FreeGasLimit in privnet leads to gas limit exceeding in case of transactions with small amount of GAS to be used for invoke operation (< real cost of the transaction). Solution: Fixed constraint in case when FreeGasLimit == 0. So now we are able to perform transactions in privnet with FreeGasLimit = 0 for free.
We not only need to remove transactions stored in the block, but also
invalidate some potential double spends caused by these transactions. Usually
new block contains a substantial number of transactions from the pool, so it's
easier to make one pass over it only keeping valid items rather than remove
them one by one and make an additional pass to recheck inputs/witnesses.
Eliminate races between tx checks and adding them to the mempool, ensure the
chain doesn't change while we're working with the new tx. Ensure only one
block addition attempt could be in progress.
Turns out, our dApps use it a lot and we were going to the DB to get it which
is a useless waste of time. Technically we could also remove blockHeight here,
but not doing it at the moment as it's more involved.
It eliminates this time waste from the pprof graph, but doesn't change 1.4M ->
1.5M 100K mainnet block import test case in any noticeable way.
This solves two problems:
* adds support for shortened SYSCALL form that uses IDs (similar to #434, but
for NEO 2.0, supporting both forms), which is important for compatibility
with C# node and mainnet chain that uses it from some height
* reworks interop plugging to use callbacks rather than appending to the map,
these map mangling functions are clearly visible in the VM profiling
statistics and we want spawning a VM to be fast, so it makes sense
optimizing it. This change moves most of the work to the init() phase
making VM setup cheaper.
Caveats:
* InteropNameToID accepts `[]byte` because that's the thing we have in
SYSCALL processing and that's the most often usecase for it, it leads to
some conversions in other places but that's acceptable because those are
either tests or init()
* three getInterop functions are: `getDefaultVMInterop`, `getSystemInterop`
and `getNeoInterop`
Our 100K (1.4M->1.5M) block import time improves by ~4% with this change.
Importing 100K blocks starting at 1.4M, before this patch:
real 6m0,356s
user 8m52,293s
sys 0m47,372s
After this patch:
real 4m17,748s
user 6m23,316s
sys 0m37,866s
Almost 30% better.
It's a getter function and even though it's quite fancy with its transactions
processing (for consensus operation) it shouldn't ever change the state of the
Blockchain. If we're to change anything here these changes may conflict with
the actual block processing later or may lead to broken state (if transactions
won't be approved for some reason).
This seriously improves the serialization/deserialization performance for
several reasons:
* no time spent in `binary` reflection
* no memory allocations being made on every read/write
* uses fast ReadBytes everywhere it's appropriate
It also makes Fixed8 Serializable just for convenience.
add dao which takes care about all CRUD operations on storage
remove blockchain state since everything is stored on change
remove storage operations from structs(entities)
move structs to entities package
This change (closely related to the neo-project/neo#1321 proposal) speeds up
1.4M mainnet blocks import by 30%. Basically, we're eliminating key decoding
for block's multisignature that has the same keys most of the time.
Things I don't like about this patch:
* yet another parameter for verifyHashAgainstScript()
* vm keys are not copied in/out
But it's rather simple and solves the problem for this particular case, so I
think it's worth it.
It makes very little sense having pointers here, these structures MUST have
some kind of key and this key is not gonna be wandering somewhere on its
own. Fixes a part of #519.
It reduces heap pressure a little for these elements as we don't have to
allocate/free them individually. And they're directly tied to transactions or
block, not being shared or anything like that, so it makes little sense for
them to be pointer-based. It only makes building transactions a little easier,
but that's obviously a minor usecase.
add processing of validators while block persist;
add validator structure with decoding/encoding;
add validator get from store;
add EnrollmentTX and StateTX processing;
add pubkey decode bytes, unique and contains functions;
Fixes failure to process transaction from the block when it was relayed
initially:
WARN[0788] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
WARN[0790] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
WARN[0790] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
If we're to receive some 500 headers (less than `headerBatchCount`) and quit
before receiving more of them we end up with clean `bc.headerList` that will
be inited going backwards to the `targetHash`, but code path doesn't add add
the `targetHash` itself which it should do in this particular case, otherwise
we end with no genesis block hash in the list.
Missing it the following line could fail on subsequent restarts:
currHeaderHeight, currHeaderHash, err := storage.CurrentHeaderHeight(bc.store)
if the node was stopped before any headers had been received.
Extend Blockchainer with one more method to spawn a VM for test runs and use
it to run scripts. Gas consumption is not counted or limited in any way at the
moment (see #424).
VM should be responsible for code execution and in case anyone interested in additional logging or errors they could handle them like we do it iin cli.
We're about stored values here, so print those, which avoids blocking in
bc.HeaderHeight() and removes duplication between blockHeight and
persistedHeight. Fixes saving the blockchain on exit (deferred function in
Run() blocked in persist()).
Test modification was required because storeBlocks() doesn't actually save
headers and thus TestGetTransaction started to fail on persist().
If you're to sync less than 2000 headers no batched header key-value is
gonna be written into the DB and init() would panic because
bc.headerList.Len() would return 0. Use genesis block as a target in this
case.
commit methods duplicated putSmthIntoStore functions, but have MemCachedStore
now that can easily substitute for a Batch, especially given that interop
needs something like that for its storage purposes anyway.
This adds the following verifications:
* merkleroot check
* index check
* timestamp check
* witnesses verification
VerifyWitnesses is also renamed to verifyTxWitnesses here to not confuse it
with verifyBlockWitnesse and to hide it from external access (no users at the
moment).
Enable transaction verification for privnets and tests, testnet can't
successfuly verify block number 316711 with it enabled and mainnet stops at
105829.
We want to get a full block, so it has to have transactions
inside. Unfortunately our tests were used to this wrong behavior and utilized
completely bogus transactions without data that couldn't be persisted, so fix
that also.
PublishTX only had one of these flags, but newer contracts (created via the
interop function) can have more and these flags are aggregated into one field
that uses PropertyState enumeration (it's used to publish contract, so
supposedly it's also a nice choice for contract state storage).
Script can return non-bool results that can still be converted to bool
according to the usual VM rules. Unfortunately Bool() panics if this
conversion fails which is OK for things done in vm.execute(), but certainly
not for VerifyWitnesses(), thus there is a need for TryBool() that will just
return an error in this case.
If the block references two ouputs in some other transaction the code failed
to verify it because of key collision. C# code implements it properly by using
full CoinReference type as a key, so let's do it in a similar fashion.
Claim transactions have different logic in C# node, so we need to
implement it too. It's not the most elegant way to fix it, but let's make it
work first and then refactor if and where needed. Fixes verification of Claim
transactions.
