In this case emitted event parameters should match from invocation to
invocation. It's an error otherwise (and if the type is not Any).
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Currently we have problems with unnamed structs used as a parameter for
notifications, because there's no one-to-one correspondence between
notification parameter and the list of extended types used by the whole
contract. Otherwise eventtypes guessing works OK.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
config_extended.yml contains an example of user-defined configuration
file with extended event types. User-defined event types are allowed
to be named and complicated, i.e. properly support extended types
notation.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Unfortunately, without pre-set user extended types configuration for events
and without --guess-eventtypes flag set we are allowed to rely only on manifest
information about types. Manifest can't give us a lot of information, but we
still need to be able to generate RPC binding. Arrays and structs are correctly
handled by the current code, but maps always rely on the fact that map's value
type is set. It's not true in the described case, so make the maps type convertor
handle this situation in a similar way how arrays are handled.
Without this commit the following panic occurs on attempt to generate RPC binding:
```
--- FAIL: TestAssistedRPCBindings/testdata/notifications (0.01s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x7f7c0e]
goroutine 190 [running]:
testing.tRunner.func1.2({0x109cb40, 0x1d58760})
/usr/local/go/src/testing/testing.go:1396 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1399 +0x39f
panic({0x109cb40, 0x1d58760})
/usr/local/go/src/runtime/panic.go:884 +0x212
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.extendedTypeToGo({0x22, {0x0, 0x0}, {0x0, 0x0}, 0x0, 0x0, {0x0, 0x0, 0x0}}, ...)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:515 +0x36e
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.scTypeToGo({0xc000206d92?, 0xc000206d80?}, 0x22, 0xc0005d70e0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:643 +0x138
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.scTemplateToRPC({{0xc00049bb07, 0x7}, 0xc0004c89c0, {0x33, 0x22, 0x11, 0x0, 0xff, 0xee, 0xdd, ...}, ...}, ...)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:686 +0xbc4
github.com/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding.Generate({{0xc00049bb07, 0x7}, 0xc0004c89c0, {0x33, 0x22, 0x11, 0x0, 0xff, 0xee, 0xdd, ...}, ...})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/smartcontract/rpcbinding/binding.go:421 +0x387
github.com/nspcc-dev/neo-go/cli/smartcontract.contractGenerateSomething(0xc00043e2c0, 0x137cd00)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate.go:99 +0x855
github.com/nspcc-dev/neo-go/cli/smartcontract.contractGenerateRPCWrapper(0xc00043e2c0?)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate.go:60 +0x25
github.com/urfave/cli.HandleAction({0x1048380?, 0x137c660?}, 0x13?)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:524 +0x50
github.com/urfave/cli.Command.Run({{0x123539d, 0x13}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x12577ad, 0x2a}, {0x127ad35, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:173 +0x65b
github.com/urfave/cli.(*App).RunAsSubcommand(0xc0001f4000, 0xc00043e000)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:405 +0x91b
github.com/urfave/cli.Command.startApp({{0x12281e1, 0x8}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x1254d8a, 0x28}, {0x0, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:372 +0x6e7
github.com/urfave/cli.Command.Run({{0x12281e1, 0x8}, {0x0, 0x0}, {0x0, 0x0, 0x0}, {0x1254d8a, 0x28}, {0x0, ...}, ...}, ...)
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/command.go:102 +0x825
github.com/urfave/cli.(*App).Run(0xc00024e000, {0xc0004f6420, 0xb, 0xb})
/home/anna/go/pkg/mod/github.com/urfave/cli@v1.22.5/app.go:277 +0x8a7
github.com/nspcc-dev/neo-go/cli/smartcontract.TestAssistedRPCBindings.func1.1(0x9f8829?)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/cli/smartcontract/generate_test.go:395 +0x5fc
testing.tRunner(0xc0006824e0, 0xc0004a3680)
/usr/local/go/src/testing/testing.go:1446 +0x10b
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1493 +0x35f
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
There are two ways of doing this: first one is to emit all notifications
parameter data into rpcbindings configuration on compile time (event if
the parameter has a simple type), and the second one is to fetch parameter
type from the manifest on rpcbinding file generation if needed (we always
have manifest at this stage, thus it's not a problem to retrieve necessary
information). The latter case is chosen to reduce the bindings configuration
file size.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Notification and its parameters may have any UTF8-compatible name
which is inappropriate for bindings configuration and for the resulting
RPC bindings file. This commit stores the prettified version of
notification's name and parameters that are ready to be used in the
resulting RPC binding without any changes.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
The user should specify it via parameter's `extendedtype` field and
via upper-level `namedtypes` field of the contract configuration YAML.
Also, as we have proper event structure source, make the `--guess-eventtype`
compilation option and make event types guess optional.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
New rule for writing blocks of code to our template: new line before
the block starts and new line after the block ends. This rule is the
same as the one we use during manual typing.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
Properly load the provided method using NEF and hash specified. It allows
to have NEF properly set in the VM context and handle CALLT instruction
correctly.
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
It's enough to specify the input file only to get the standard output:
```
$ neo-go contract compile -i ./1-print/1-print.go
$ neo-go contract compile -i ./1-print/
```
Signed-off-by: Anna Shaleva <shaleva.ann@nspcc.ru>
If `StartWhenSynchronized` is unset in config, `node` command runs RPC
service instantly. Previously there was a ground for deadlock. Command
started RPC server synchronously. According to server implementation, it
sends all internal failures to the parameterized error channel. Deadlock
occured because main routine didn't scan the channel.
Run `rpcsrv.Server.Start` in a separate go-routine in `startServer`.
This prevents potential deadlock caused by writing into unread channel.
Fixes#2896.
Signed-off-by: Leonard Lyubich <leonard@morphbits.io>
Everywhere including examples, external interop APIs, bindings generators
code and in other valuable places. A couple of `interface{}` usages are
intentionally left in the CHANGELOG.md, documentation and tests.
Do not add them directly to chain, it will be done by the block queue
manager. Close https://github.com/nspcc-dev/neo-go/issues/2923. However,
this commit is not valid without
https://github.com/roman-khimov/dbft/pull/4.
It's the neo-go's duty to initialize consensus after subsequent block
addition; the dBFT itself must wait for the neo-go to complete the block
addition and notify the dBFT, so that it can initialize at 0-th view to
collect the next block.
If NEP2 account label is not provided as a flag for import-related
CLI commands then ask it in the interactive mode.
This change breaks the compatibility with the old behaviour (add
the unnamed account if the name wasn't specified).
Fetch account's name from the CLI argument and do not ask for the
user's input if provided, close#2882. Fetch password from config
if provided, close#2883.
And include some node-specific configurations there with backwards
compatibility. Note that in the future we'll remove Ledger's
fields from the ProtocolConfiguration and it'll be possible to access them in
Blockchain directly (not via .Ledger).
The other option tried was using two configuration types separately, but that
incurs more changes to the codebase, single structure that behaves almost like
the old one is better for backwards compatibility.
Fixes#2676.
There are no changes visible from the user side (at least for those
users who doesn't put Prometheus's or pprof's port in quotes), just
internal refactoring. From now and on, BasicService configuration is
used by RPC server config, TLS for RPC server, pprof and Prometheus.
Follow neo-project/neo#2807. Notice that this data is not cached, our previous
implementation wasn't too and it shouldn't be a problem (not on the hot path).
It's useful to reproduce different execution problems including executions
stopped because of GAS limit. Satoshi representation is deliberately used,
because that's what is usually found in logs.
Problem: failing part of TestLoad:
```
=== RUN TestLoad/loadgo,_check_signers
cli_test.go:160:
Error Trace: /home/circleci/go/src/github.com/nspcc-dev/neo-go/cli/vm/cli_test.go:160
/home/circleci/go/src/github.com/nspcc-dev/neo-go/cli/vm/cli_test.go:147
/home/circleci/go/src/github.com/nspcc-dev/neo-go/cli/vm/cli_test.go:444
Error: command took too long time
Test: TestLoad/loadgo,_check_signers
```
Solution: split the test into multiple parts to reduce test execution time.
And fix failing test along the way:
```
2022-11-11T12:37:47.0413934Z === RUN TestResetDB
2022-11-11T12:37:47.0414557Z 2022-11-11T12:36:54.510Z INFO initial gas supply is not set or wrong, setting default value {"InitialGASSupply": "52000000"}
2022-11-11T12:37:47.0415288Z 2022-11-11T12:36:54.510Z INFO MaxBlockSize is not set or wrong, setting default value {"MaxBlockSize": 262144}
2022-11-11T12:37:47.0416020Z 2022-11-11T12:36:54.510Z INFO MaxBlockSystemFee is not set or wrong, setting default value {"MaxBlockSystemFee": 900000000000}
2022-11-11T12:37:47.0416786Z 2022-11-11T12:36:54.510Z INFO MaxTransactionsPerBlock is not set or wrong, using default value {"MaxTransactionsPerBlock": 512}
2022-11-11T12:37:47.0417725Z 2022-11-11T12:36:54.510Z INFO MaxValidUntilBlockIncrement is not set or wrong, using default value {"MaxValidUntilBlockIncrement": 5760}
2022-11-11T12:37:47.0418415Z 2022-11-11T12:36:54.510Z INFO Hardforks are not set, using default value
2022-11-11T12:37:47.0419272Z 2022-11-11T12:36:54.523Z INFO no storage version found! creating genesis block
2022-11-11T12:37:47.0419997Z 2022-11-11T12:36:54.529Z INFO chain is already at the proper state {"height": 0}
2022-11-11T12:37:47.0420974Z testing.go:1097: TempDir RemoveAll cleanup: remove C:\Users\RUNNER~1\AppData\Local\Temp\TestResetDB671187463\001\chains\privnet\000001.log: The process cannot access the file because it is being used by another process.
2022-11-11T12:37:47.0421606Z --- FAIL: TestResetDB (1.99s)
```
* strip NEP-XX methods before going into generator to avoid unused imports
* nepXX.Invoker types already include Call
* always import util, it's used for Hash
It makes sense in general (further narrowing down the time window when
transactions are processed by consensus thread) and it improves block times a
little too, especially in the 7+2 scenario.
Related to #2744.
1. UsageText shows the command usage rule. Fixed/added where needed.
2. Description shows the command description, huh. It is shown right after
UsageText, so there's no need to repeat the command usage rule. If
Description contains Example, then it should be printed on a new line.
Usage message is shown on common --help command, thus it should be meaningful
and short. If user needs more detailed command description, then he can use
command-specific help.
As a result, current VM help looks pretty simple:
```
NEO-GO-VM > help
NAME:
VM CLI - Official VM CLI for Neo-Go
USAGE:
[global options] command [command options] [arguments...]
VERSION:
0.99.5-pre-15-g5463ec41
COMMANDS:
exit Exit the VM prompt
ip Show current instruction
break Place a breakpoint
jump Jump to the specified instruction (absolute IP value)
estack Show evaluation stack contents
istack Show invocation stack contents
sslot Show static slot contents
lslot Show local slot contents
aslot Show arguments slot contents
loadnef Load a NEF-consistent script into the VM optionally attaching to it provided signers with scopes
loadbase64 Load a base64-encoded script string into the VM optionally attaching to it provided signers with scopes
loadhex Load a hex-encoded script string into the VM optionally attaching to it provided signers with scopes
loadgo Compile and load a Go file with the manifest into the VM optionally attaching to it provided signers with scopes
loadtx Load transaction into the VM from chain or from parameter context file
loaddeployed Load deployed contract into the VM from chain optionally attaching to it provided signers with scopes
reset Unload compiled script from the VM and reset context to proper (possibly, historic) state
parse Parse provided argument and convert it into other possible formats
run Execute the current loaded script
cont Continue execution of the current loaded script
step Step (n) instruction in the program
stepinto Stepinto instruction to take in the debugger
stepout Stepout instruction to take in the debugger
stepover Stepover instruction to take in the debugger
ops Dump opcodes of the current loaded program
events Dump events emitted by the current loaded program
env Dump state of the chain that is used for VM CLI invocations (use -v for verbose node configuration)
storage Dump storage of the contract with the specified hash, address or ID as is at the current stage of script invocation
changes Dump storage changes as is at the current stage of loaded script invocation
help, h Shows a list of commands or help for one command
GLOBAL OPTIONS:
--help, -h show help
--version, -v print the version
```
Share parameters parsing code between 'contract invokefunction' and
'vm run' commands. It allows VM CLI to parse more complicated parameter
types including arrays and file-backed bytestrings.
