"description":"Sets status of a given operation. Any new timestamps (as determined by\ndescription) are appended to TimestampEvents. Should only be called by VMs\ncreated by the Pipelines Service and not by end users."
"description":"Pipelines with names that match this prefix should be\nreturned. If unspecified, all pipelines in the project, up to\n`pageSize`, will be returned.",
"description":"Creates a pipeline that can be run later. Create takes a Pipeline that\nhas all fields other than `pipelineId` populated, and then returns\nthe same pipeline with `pipelineId` populated. This id can be used\nto run the pipeline.\n\nCaller must have WRITE permission to the project.",
"description":"Runs a pipeline. If `pipelineId` is specified in the request, then\nrun a saved pipeline. If `ephemeralPipeline` is specified, then run\nthat pipeline once without saving a copy.\n\nThe caller must have READ permission to the project where the pipeline\nis stored and WRITE permission to the project where the pipeline will be\nrun, as VMs will be created and storage will be used.\n\nIf a pipeline operation is still running after 6 days, it will be canceled."
"description":"Gets the latest state of a long-running operation. Clients can use this\nmethod to poll the operation result at intervals as recommended by the API\nservice."
"description":"A string for filtering Operations.\nThe following filter fields are supported:\n\n* projectId: Required. Corresponds to\n OperationMetadata.projectId.\n* createTime: The time this job was created, in seconds from the\n [epoch](http://en.wikipedia.org/wiki/Unix_time). Can use `\u003e=` and/or `\u003c=`\n operators.\n* status: Can be `RUNNING`, `SUCCESS`, `FAILURE`, or `CANCELED`. Only\n one status may be specified.\n* labels.key where key is a label key.\n\nExamples:\n\n* `projectId = my-project AND createTime \u003e= 1432140000`\n* `projectId = my-project AND createTime \u003e= 1432140000 AND createTime \u003c= 1432150000 AND status = RUNNING`\n* `projectId = my-project AND labels.color = *`\n* `projectId = my-project AND labels.color = red`",
"description":"Starts asynchronous cancellation on a long-running operation. The server makes a best effort to cancel the operation, but success is not guaranteed. Clients may use Operations.GetOperation or Operations.ListOperations to check whether the cancellation succeeded or the operation completed despite cancellation.",
"description":"API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token.",
"type":"string",
"location":"query"
},
"quotaUser":{
"description":"Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters.",
"description":"Required. The name of the disk where this parameter is\nlocated. Can be the name of one of the disks specified in the\nResources field, or \"boot\", which represents the Docker\ninstance's boot disk and has a mount point of `/`.",
"description":"Required. The path within the user's docker container where\nthis input should be localized to and from, relative to the specified\ndisk's mount point. For example: file.txt,",
"description":"Required. The command or newline delimited script to run. The command\nstring will be executed within a bash shell.\n\nIf the command exits with a non-zero exit code, output parameter\nde-localization will be skipped and the pipeline operation's\n`error` field will be populated.\n\nMaximum command string length is 16384.",
"description":"Required. Image name from either Docker Hub or Google Container Registry.\nUsers that run pipelines must have READ access to the image.",
"description":"Deprecated. Disks created by the Pipelines API will be deleted at the end\nof the pipeline run, regardless of what this field is set to.",
"description":"Required at create time and cannot be overridden at run time.\nSpecifies the path in the docker container where files on\nthis disk should be located. For example, if `mountPoint`\nis `/mnt/disk`, and the parameter has `localPath`\n`inputs/file.txt`, the docker container can access the data at\n`/mnt/disk/inputs/file.txt`.",
"type":"string"
},
"readOnly":{
"description":"Specifies how a sourced-base persistent disk will be mounted. See\nhttps://cloud.google.com/compute/docs/disks/persistent-disks#use_multi_instances\nfor more details.\nCan only be set at create time.",
"description":"The full or partial URL of the persistent disk to attach. See\nhttps://cloud.google.com/compute/docs/reference/latest/instances#resource\nand\nhttps://cloud.google.com/compute/docs/disks/persistent-disks#snapshots\nfor more details.",
"description":"Required. The name of the disk that can be used in the pipeline\nparameters. Must be 1 - 63 characters.\nThe name \"boot\" is reserved for system use.",
"type":"string"
},
"type":{
"enumDescriptions":[
"Default disk type. Use one of the other options below.",
"Specifies a Google Compute Engine persistent hard disk. See\nhttps://cloud.google.com/compute/docs/disks/#pdspecs for details.",
"Specifies a Google Compute Engine persistent solid-state disk. See\nhttps://cloud.google.com/compute/docs/disks/#pdspecs for details.",
"Specifies a Google Compute Engine local SSD.\nSee https://cloud.google.com/compute/docs/disks/local-ssd for details."
],
"enum":[
"TYPE_UNSPECIFIED",
"PERSISTENT_HDD",
"PERSISTENT_SSD",
"LOCAL_SSD"
],
"description":"Required. The type of the disk to create.",
"description":"A generic empty message that you can re-use to avoid defining duplicated\nempty messages in your APIs. A typical example is to use it as the request\nor the response type of an API method. For instance:\n\n service Foo {\n rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);\n }\n\nThe JSON representation for `Empty` is empty JSON object `{}`."
},
"PipelineParameter":{
"description":"Parameters facilitate setting and delivering data into the\npipeline's execution environment. They are defined at create time,\nwith optional defaults, and can be overridden at run time.\n\nIf `localCopy` is unset, then the parameter specifies a string that\nis passed as-is into the pipeline, as the value of the environment\nvariable with the given name. A default value can be optionally\nspecified at create time. The default can be overridden at run time\nusing the inputs map. If no default is given, a value must be\nsupplied at runtime.\n\nIf `localCopy` is defined, then the parameter specifies a data\nsource or sink, both in Google Cloud Storage and on the Docker container\nwhere the pipeline computation is run. The service account associated with\nthe Pipeline (by\ndefault the project's Compute Engine service account) must have access to the\nGoogle Cloud Storage paths.\n\nAt run time, the Google Cloud Storage paths can be overridden if a default\nwas provided at create time, or must be set otherwise. The pipeline runner\nshould add a key/value pair to either the inputs or outputs map. The\nindicated data copies will be carried out before/after pipeline execution,\njust as if the corresponding arguments were provided to `gsutil cp`.\n\nFor example: Given the following `PipelineParameter`, specified\nin the `inputParameters` list:\n\n```\n{name: \"input_file\", localCopy: {path: \"file.txt\", disk: \"pd1\"}}\n```\n\nwhere `disk` is defined in the `PipelineResources` object as:\n\n```\n{name: \"pd1\", mountPoint: \"/mnt/disk/\"}\n```\n\nWe create a disk named `pd1`, mount it on the host VM, and map\n`/mnt/pd1` to `/mnt/disk` in the docker container. At\nruntime, an entry for `input_file` would be required in the inputs\nmap, such as:\n\n```\n inputs[\"input_file\"] = \"gs://my-bucket/bar.txt\"\n```\n\nThis would generate the following gsutil call:\n\n```\n gsutil cp gs://my-bucket/bar.txt /mnt/pd1/file.txt\n```\n\nThe file `/mnt/pd1/file.txt` maps to `/mnt/disk/file.txt` in the\nDocker container. Acceptable paths are:\n\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\u003cth\u003eGoogle Cloud storage path\u003c/th\u003e\u003cth\u003eLocal path\u003c/th\u003e\u003c/tr\u003e\n \u003c/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\u003ctd\u003efile\u003c/td\u003e\u003ctd\u003efile\u003c/td\u003e\u003c/tr\u003e\n \u003ctr\u003e\u003ctd\u003eglob\u003c/td\u003e\u003ctd\u003edirectory\u003c/td\u003e\u003c/tr\u003e\n \u003c/tbody\u003e\n\u003c/table\u003e\n\nFor outputs, the direction of the copy is reversed:\n\n```\n gsutil cp /mnt/disk/file.txt gs://my-bucket/bar.txt\n```\n\nAcceptable paths are:\n\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\u003cth\u003eLocal path\u003c/th\u003e\u003cth\u003eGoogle Cloud Storage path\u003c/th\u003e\u003c/tr\u003e\n \u003c/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\u003ctd\u003efile\u003c/td\u003e\u003ctd\u003efile\u003c/td\u003e\u003c/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003efile\u003c/td\u003e\n \u003ctd\u003edirectory - directory must already exist\u003c/td\u003e\n \u003c/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eglob\u003c/td\u003e\n \u003ctd\u003edirectory - directory will be created if it doesn't exist\u003c/td\u003e\u003c/tr\u003e\n \u003c/tbody\u003e\n\u003c/table\u003e\n\nOne restriction due to docker limitations, is that for outputs that are found\non the boot disk, the local path cannot be a glob and must be a file.",
"description":"The default value for this parameter. Can be overridden at runtime.\nIf `localCopy` is present, then this must be a Google Cloud Storage path\nbeginning with `gs://`.",
"description":"If present, this parameter is marked for copying to and from the VM.\n`LocalCopy` indicates where on the VM the file should be. The value\ngiven to this parameter (either at runtime or using `defaultValue`)\nmust be the remote path where the file should be."
"description":"The logging options for the pipeline run.",
"type":"object",
"properties":{
"gcsPath":{
"description":"The location in Google Cloud Storage to which the pipeline logs\nwill be copied. Can be specified as a fully qualified directory\npath, in which case logs will be output with a unique identifier\nas the filename in that directory, or as a fully specified path,\nwhich must end in `.log`, in which case that path will be\nused, and the user must ensure that logs are not\noverwritten. Stdout and stderr logs from the run are also\ngenerated and output as `-stdout.log` and `-stderr.log`.",
"type":"string"
}
},
"id":"LoggingOptions"
},
"RunPipelineRequest":{
"id":"RunPipelineRequest",
"description":"The request to run a pipeline. If `pipelineId` is specified, it\nrefers to a saved pipeline created with CreatePipeline and set as\nthe `pipelineId` of the returned Pipeline object. If\n`ephemeralPipeline` is specified, that pipeline is run once\nwith the given args and not saved. It is an error to specify both\n`pipelineId` and `ephemeralPipeline`. `pipelineArgs`\nmust be specified.",
"type":"object",
"properties":{
"pipelineArgs":{
"$ref":"RunPipelineArgs",
"description":"The arguments to use when running this pipeline."
},
"pipelineId":{
"description":"The already created pipeline to run.",
"type":"string"
},
"ephemeralPipeline":{
"description":"A new pipeline object to run once and then delete.",
"$ref":"Pipeline"
}
}
},
"CancelOperationRequest":{
"description":"The request message for Operations.CancelOperation.",
"type":"object",
"properties":{},
"id":"CancelOperationRequest"
},
"RuntimeMetadata":{
"description":"Runtime metadata that will be populated in the\nruntimeMetadata\nfield of the Operation associated with a RunPipeline execution.",
"type":"object",
"properties":{
"computeEngine":{
"$ref":"ComputeEngine",
"description":"Execution information specific to Google Compute Engine."
}
},
"id":"RuntimeMetadata"
},
"Operation":{
"properties":{
"done":{
"type":"boolean",
"description":"If the value is `false`, it means the operation is still in progress.\nIf `true`, the operation is completed, and either `error` or `response` is\navailable."
},
"response":{
"description":"If importing ReadGroupSets, an ImportReadGroupSetsResponse is returned. If importing Variants, an ImportVariantsResponse is returned. For pipelines and exports, an Empty response is returned.",
"type":"object",
"additionalProperties":{
"description":"Properties of the object. Contains field @type with type URL.",
"type":"any"
}
},
"name":{
"description":"The server-assigned name, which is only unique within the same service that originally returns it. For example: `operations/CJHU7Oi_ChDrveSpBRjfuL-qzoWAgEw`",
"type":"string"
},
"error":{
"$ref":"Status",
"description":"The error result of the operation in case of failure or cancellation."
},
"metadata":{
"additionalProperties":{
"description":"Properties of the object. Contains field @type with type URL.",
"type":"any"
},
"description":"An OperationMetadata object. This will always be returned with the Operation.",
"type":"object"
}
},
"id":"Operation",
"description":"This resource represents a long-running operation that is the result of a\nnetwork API call.",
"type":"object"
},
"ImportReadGroupSetsResponse":{
"description":"The read group set import response.",
"type":"object",
"properties":{
"readGroupSetIds":{
"description":"IDs of the read group sets that were created.",
"items":{
"type":"string"
},
"type":"array"
}
},
"id":"ImportReadGroupSetsResponse"
},
"Status":{
"description":"The `Status` type defines a logical error model that is suitable for different\nprogramming environments, including REST APIs and RPC APIs. It is used by\n[gRPC](https://github.com/grpc). The error model is designed to be:\n\n- Simple to use and understand for most users\n- Flexible enough to meet unexpected needs\n\n# Overview\n\nThe `Status` message contains three pieces of data: error code, error message,\nand error details. The error code should be an enum value of\ngoogle.rpc.Code, but it may accept additional error codes if needed. The\nerror message should be a developer-facing English message that helps\ndevelopers *understand* and *resolve* the error. If a localized user-facing\nerror message is needed, put the localized message in the error details or\nlocalize it in the client. The optional error details may contain arbitrary\ninformation about the error. There is a predefined set of error detail types\nin the package `google.rpc` that can be used for common error conditions.\n\n# Language mapping\n\nThe `Status` message is the logical representation of the error model, but it\nis not necessarily the actual wire format. When the `Status` message is\nexposed in different client libraries and different wire protocols, it can be\nmapped differently. For example, it will likely be mapped to some exceptions\nin Java, but more likely mapped to some error codes in C.\n\n# Other uses\n\nThe error model and the `Status` message can be used in a variety of\nenvironments, either with or without APIs, to provide a\nconsistent developer experience across different environments.\n\nExample uses of this error model include:\n\n- Partial errors. If a service needs to return partial errors to the client,\n it may embed the `Status` in the normal response to indicate the partial\n errors.\n\n- Workflow errors. A typical workflow has multiple steps. Each step may\n have a `Status` message for error reporting.\n\n- Batch operations. If a client uses batch request and batch response, the\n `Status` message should be used directly inside batch response, one for\n each error sub-response.\n\n- Asynchronous operations. If an API call embeds asynchronous operation\n results in its response, the status of those operations should be\n represented directly using the `Status` message.\n\n- Logging. If some API errors are stored in logs, the message `Status` could\n be used directly after any stripping needed for security/privacy reasons.",
"type":"object",
"properties":{
"code":{
"format":"int32",
"description":"The status code, which should be an enum value of google.rpc.Code.",
"type":"integer"
},
"message":{
"description":"A developer-facing error message, which should be in English. Any\nuser-facing error message should be localized and sent in the\ngoogle.rpc.Status.details field, or localized by the client.",
"type":"string"
},
"details":{
"description":"A list of messages that carry the error details. There is a common set of\nmessage types for APIs to use.",
"items":{
"additionalProperties":{
"description":"Properties of the object. Contains field @type with type URL.",
"type":"any"
},
"type":"object"
},
"type":"array"
}
},
"id":"Status"
},
"ServiceAccount":{
"description":"A Google Cloud Service Account.",
"type":"object",
"properties":{
"scopes":{
"description":"List of scopes to be enabled for this service account on the VM.\nThe following scopes are automatically included:\n\n* https://www.googleapis.com/auth/compute\n* https://www.googleapis.com/auth/devstorage.full_control\n* https://www.googleapis.com/auth/genomics\n* https://www.googleapis.com/auth/logging.write\n* https://www.googleapis.com/auth/monitoring.write",
"items":{
"type":"string"
},
"type":"array"
},
"email":{
"description":"Email address of the service account. Defaults to `default`,\nwhich uses the compute service account associated with the project.",
"type":"string"
}
},
"id":"ServiceAccount"
},
"Pipeline":{
"type":"object",
"properties":{
"inputParameters":{
"description":"Input parameters of the pipeline.",
"items":{
"$ref":"PipelineParameter"
},
"type":"array"
},
"resources":{
"$ref":"PipelineResources",
"description":"Required. Specifies resource requirements for the pipeline run.\nRequired fields:\n\n*\nminimumCpuCores\n\n*\nminimumRamGb"
},
"name":{
"type":"string",
"description":"Required. A user specified pipeline name that does not have to be unique.\nThis name can be used for filtering Pipelines in ListPipelines."
},
"pipelineId":{
"description":"Unique pipeline id that is generated by the service when CreatePipeline\nis called. Cannot be specified in the Pipeline used in the\nCreatePipelineRequest, and will be populated in the response to\nCreatePipeline and all subsequent Get and List calls. Indicates that the\nservice has registered this pipeline.",
"type":"string"
},
"projectId":{
"description":"Required. The project in which to create the pipeline. The caller must have\nWRITE access.",
"type":"string"
},
"outputParameters":{
"description":"Output parameters of the pipeline.",
"items":{
"$ref":"PipelineParameter"
},
"type":"array"
},
"docker":{
"$ref":"DockerExecutor",
"description":"Specifies the docker run information."
},
"description":{
"description":"User-specified description.",
"type":"string"
}
},
"id":"Pipeline",
"description":"The pipeline object. Represents a transformation from a set of input\nparameters to a set of output parameters. The transformation is defined\nas a docker image and command to run within that image. Each pipeline\nis run on a Google Compute Engine VM. A pipeline can be created with the\n`create` method and then later run with the `run` method, or a pipeline can\nbe defined and run all at once with the `run` method."
},
"PipelineResources":{
"description":"The system resources for the pipeline run.",
"type":"object",
"properties":{
"minimumRamGb":{
"format":"double",
"description":"The minimum amount of RAM to use. Defaults to 3.75 (GB)",
"type":"number"
},
"preemptible":{
"description":"Whether to use preemptible VMs. Defaults to `false`. In order to use this,\nmust be true for both create time and run time. Cannot be true at run time\nif false at create time.",
"type":"boolean"
},
"zones":{
"items":{
"type":"string"
},
"type":"array",
"description":"List of Google Compute Engine availability zones to which resource\ncreation will restricted. If empty, any zone may be chosen."
},
"minimumCpuCores":{
"format":"int32",
"description":"The minimum number of cores to use. Defaults to 1.",
"type":"integer"
},
"noAddress":{
"description":"Whether to assign an external IP to the instance. This is an experimental\nfeature that may go away. Defaults to false.\nCorresponds to `--no_address` flag for [gcloud compute instances create]\n(https://cloud.google.com/sdk/gcloud/reference/compute/instances/create).\nIn order to use this, must be true for both create time and run time.\nCannot be true at run time if false at create time. If you need to ssh into\na private IP VM for debugging, you can ssh to a public VM and then ssh into\nthe private VM's Internal IP. If noAddress is set, this pipeline run may\nonly load docker images from Google Container Registry and not Docker Hub.\nBefore using this, you must\n[configure access to Google services from internal IPs](https://cloud.google.com/compute/docs/configure-private-google-access#configuring_access_to_google_services_from_internal_ips).",
"type":"boolean"
},
"disks":{
"items":{
"$ref":"Disk"
},
"type":"array",
"description":"Disks to attach."
},
"bootDiskSizeGb":{
"format":"int32",
"description":"The size of the boot disk. Defaults to 10 (GB).",
"type":"integer"
}
},
"id":"PipelineResources"
},
"OperationEvent":{
"description":"An event that occurred during an Operation.",
"type":"object",
"properties":{
"endTime":{
"format":"google-datetime",
"description":"Optional time of when event finished. An event can have a start time and no\nfinish time. If an event has a finish time, there must be a start time.",
"type":"string"
},
"startTime":{
"format":"google-datetime",
"description":"Optional time of when event started.",
"type":"string"
},
"description":{
"description":"Required description of event.",
"type":"string"
}
},
"id":"OperationEvent"
},
"ControllerConfig":{
"description":"Stores the information that the controller will fetch from the\nserver in order to run. Should only be used by VMs created by the\nPipelines Service and not by end users.",
"description":"Properties of the object. Contains field @type with type URL.",
"type":"any"
},
"description":"The original request that started the operation. Note that this will be in\ncurrent version of the API. If the operation was started with v1beta2 API\nand a GetOperation is performed on v1 API, a v1 request will be returned.",
"type":"object"
},
"runtimeMetadata":{
"additionalProperties":{
"description":"Properties of the object. Contains field @type with type URL.",
"description":"This field is deprecated. Use `labels` instead. Optionally provided by the\ncaller when submitting the request that creates the operation.",
"description":"Optional event messages that were generated during the job's execution.\nThis also contains any warnings that were generated during import\nor export.",
"description":"The response of ListPipelines. Contains at most `pageSize`\npipelines. If it contains `pageSize` pipelines, and more pipelines\nexist, then `nextPageToken` will be populated and should be\nused as the `pageToken` argument to a subsequent ListPipelines\nrequest.",
"description":"Pipeline input arguments; keys are defined in the pipeline documentation.\nAll input parameters that do not have default values must be specified.\nIf parameters with defaults are specified here, the defaults will be\noverridden.",
"description":"The Google Cloud Service Account that will be used to access data and\nservices. By default, the compute service account associated with\n`projectId` is used."
"description":"Labels to apply to this pipeline run. Labels will also be applied to\ncompute resources (VM, disks) created by this pipeline run. When listing\noperations, operations can filtered by labels.\nLabel keys may not be empty; label values may be empty. Non-empty labels\nmust be 1-63 characters long, and comply with [RFC1035]\n(https://www.ietf.org/rfc/rfc1035.txt).\nSpecifically, the name must be 1-63 characters long and match the regular\nexpression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first\ncharacter must be a lowercase letter, and all following characters must be\na dash, lowercase letter, or digit, except the last character, which cannot\nbe a dash.",
"description":"How long to keep the VM up after a failure (for example docker command\nfailed, copying input or output files failed, etc). While the VM is up, one\ncan ssh into the VM to debug. Default is 0; maximum allowed value is 1 day.",
"description":"Pipeline output arguments; keys are defined in the pipeline\ndocumentation. All output parameters of without default values\nmust be specified. If parameters with defaults are specified\nhere, the defaults will be overridden.",
"type":"object"
},
"projectId":{
"description":"Required. The project in which to run the pipeline. The caller must have\nWRITER access to all Google Cloud services and resources (e.g. Google\nCompute Engine) will be used.",
"Not an error; returned on success\n\nHTTP Mapping: 200 OK",
"The operation was cancelled, typically by the caller.\n\nHTTP Mapping: 499 Client Closed Request",
"Unknown error. For example, this error may be returned when\na `Status` value received from another address space belongs to\nan error space that is not known in this address space. Also\nerrors raised by APIs that do not return enough error information\nmay be converted to this error.\n\nHTTP Mapping: 500 Internal Server Error",
"The client specified an invalid argument. Note that this differs\nfrom `FAILED_PRECONDITION`. `INVALID_ARGUMENT` indicates arguments\nthat are problematic regardless of the state of the system\n(e.g., a malformed file name).\n\nHTTP Mapping: 400 Bad Request",
"The deadline expired before the operation could complete. For operations\nthat change the state of the system, this error may be returned\neven if the operation has completed successfully. For example, a\nsuccessful response from a server could have been delayed long\nenough for the deadline to expire.\n\nHTTP Mapping: 504 Gateway Timeout",
"Some requested entity (e.g., file or directory) was not found.\n\nNote to server developers: if a request is denied for an entire class\nof users, such as gradual feature rollout or undocumented whitelist,\n`NOT_FOUND` may be used. If a request is denied for some users within\na class of users, such as user-based access control, `PERMISSION_DENIED`\nmust be used.\n\nHTTP Mapping: 404 Not Found",
"The entity that a client attempted to create (e.g., file or directory)\nalready exists.\n\nHTTP Mapping: 409 Conflict",
"The caller does not have permission to execute the specified\noperation. `PERMISSION_DENIED` must not be used for rejections\ncaused by exhausting some resource (use `RESOURCE_EXHAUSTED`\ninstead for those errors). `PERMISSION_DENIED` must not be\nused if the caller can not be identified (use `UNAUTHENTICATED`\ninstead for those errors). This error code does not imply the\nrequest is valid or the requested entity exists or satisfies\nother pre-conditions.\n\nHTTP Mapping: 403 Forbidden",
"The request does not have valid authentication credentials for the\noperation.\n\nHTTP Mapping: 401 Unauthorized",
"Some resource has been exhausted, perhaps a per-user quota, or\nperhaps the entire file system is out of space.\n\nHTTP Mapping: 429 Too Many Requests",
"The operation was rejected because the system is not in a state\nrequired for the operation's execution. For example, the directory\nto be deleted is non-empty, an rmdir operation is applied to\na non-directory, etc.\n\nService implementors can use the following guidelines to decide\nbetween `FAILED_PRECONDITION`, `ABORTED`, and `UNAVAILABLE`:\n (a) Use `UNAVAILABLE` if the client can retry just the failing call.\n (b) Use `ABORTED` if the client should retry at a higher level\n (e.g., when a client-specified test-and-set fails, indicating the\n client should restart a read-modify-write sequence).\n (c) Use `FAILED_PRECONDITION` if the client should not retry until\n the system state has been explicitly fixed. E.g., if an \"rmdir\"\n fails because the directory is non-empty, `FAILED_PRECONDITION`\n should be returned since the client should not retry unless\n the files are deleted from the directory.\n\nHTTP Mapping: 400 Bad Request",
"The operation was aborted, typically due to a concurrency issue such as\na sequencer check failure or transaction abort.\n\nSee the guidelines above for deciding between `FAILED_PRECONDITION`,\n`ABORTED`, and `UNAVAILABLE`.\n\nHTTP Mapping: 409 Conflict",
"The operation was attempted past the valid range. E.g., seeking or\nreading past end-of-file.\n\nUnlike `INVALID_ARGUMENT`, this error indicates a problem that may\nbe fixed if the system state changes. For example, a 32-bit file\nsystem will generate `INVALID_ARGUMENT` if asked to read at an\noffset that is not in the range [0,2^32-1], but it will generate\n`OUT_OF_RANGE` if asked to read from an offset past the current\nfile size.\n\nThere is a fair bit of overlap between `FAILED_PRECONDITION` and\n`OUT_OF_RANGE`. We recommend using `OUT_OF_RANGE` (the more specific\nerror) when it applies so that callers who are iterating through\na space can easily look for an `OUT_OF_RANGE` error to detect when\nthey are done.\n\nHTTP Mapping: 400 Bad Request",
"The operation is not implemented or is not supported/enabled in this\nservice.\n\nHTTP Mapping: 501 Not Implemented",
"Internal errors. This means that some invariants expected by the\nunderlying system have been broken. This error code is reserved\nfor serious errors.\n\nHTTP Mapping: 500 Internal Server Error",
"The service is currently unavailable. This is most likely a\ntransient condition, which can be corrected by retrying with\na backoff.\n\nSee the guidelines above for deciding between `FAILED_PRECONDITION`,\n`ABORTED`, and `UNAVAILABLE`.\n\nHTTP Mapping: 503 Service Unavailable",
"Unrecoverable data loss or corruption.\n\nHTTP Mapping: 500 Internal Server Error"
