make commanddocs for v1.56 (#5383)
This commit is contained in:
Ivan Andreev
GitHub
parent
1f846c18d4
commit
29f967dba3
26 changed files with 728 additions and 127 deletions
|
|
@ -17,7 +17,7 @@ These flags are available for every command.
|
|||
--auto-confirm If enabled, do not request console confirmation.
|
||||
--backup-dir string Make backups into hierarchy based in DIR.
|
||||
--bind string Local address to bind to for outgoing connections, IPv4, IPv6 or name.
|
||||
--buffer-size SizeSuffix In memory buffer size when reading files for each --transfer. (default 16M)
|
||||
--buffer-size SizeSuffix In memory buffer size when reading files for each --transfer. (default 16Mi)
|
||||
--bwlimit BwTimetable Bandwidth limit in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.
|
||||
--bwlimit-file BwTimetable Bandwidth limit per file in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.
|
||||
--ca-cert string CA certificate used to verify servers
|
||||
|
|
@ -38,6 +38,7 @@ These flags are available for every command.
|
|||
--delete-during When synchronizing, delete files during transfer
|
||||
--delete-excluded Delete files on dest excluded from sync
|
||||
--disable string Disable a comma separated list of features. Use --disable help to see a list.
|
||||
--disable-http2 Disable HTTP/2 in the global transport.
|
||||
-n, --dry-run Do a trial run with no permanent changes
|
||||
--dscp string Set DSCP value to connections. Can be value or names, eg. CS1, LE, DF, AF21.
|
||||
--dump DumpFlags List of items to dump from: headers,bodies,requests,responses,auth,filters,goroutines,openfiles
|
||||
|
|
@ -86,7 +87,7 @@ These flags are available for every command.
|
|||
--min-age Duration Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
|
||||
--min-size SizeSuffix Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
|
||||
--modify-window duration Max time diff to be considered the same (default 1ns)
|
||||
--multi-thread-cutoff SizeSuffix Use multi-thread downloads for files above this size. (default 250M)
|
||||
--multi-thread-cutoff SizeSuffix Use multi-thread downloads for files above this size. (default 250Mi)
|
||||
--multi-thread-streams int Max number of streams to use for multi-thread downloads. (default 4)
|
||||
--no-check-certificate Do not verify the server SSL certificate. Insecure.
|
||||
--no-check-dest Don't check the destination, copy regardless.
|
||||
|
|
@ -136,8 +137,8 @@ These flags are available for every command.
|
|||
--stats-one-line Make the stats fit on one line.
|
||||
--stats-one-line-date Enables --stats-one-line and add current date/time prefix.
|
||||
--stats-one-line-date-format string Enables --stats-one-line-date and uses custom formatted date. Enclose date string in double quotes ("). See https://golang.org/pkg/time/#Time.Format
|
||||
--stats-unit string Show data rate in stats as either 'bits' or 'bytes'/s (default "bytes")
|
||||
--streaming-upload-cutoff SizeSuffix Cutoff for switching to chunked upload if file size is unknown. Upload starts after reaching cutoff or when file ends. (default 100k)
|
||||
--stats-unit string Show data rate in stats as either 'bits' or 'bytes' per second (default "bytes")
|
||||
--streaming-upload-cutoff SizeSuffix Cutoff for switching to chunked upload if file size is unknown. Upload starts after reaching cutoff or when file ends. (default 100Ki)
|
||||
--suffix string Suffix to add to changed files.
|
||||
--suffix-keep-extension Preserve the extension when using --suffix.
|
||||
--syslog Use Syslog for logging
|
||||
|
|
@ -153,7 +154,7 @@ These flags are available for every command.
|
|||
--use-json-log Use json log format.
|
||||
--use-mmap Use mmap allocator (see docs).
|
||||
--use-server-modtime Use server modified time instead of object metadata
|
||||
--user-agent string Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.55.0")
|
||||
--user-agent string Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.56.0-beta.5531.41f561bf2.pr-commanddocs")
|
||||
-v, --verbose count Print lots more stuff (repeat for more)
|
||||
```
|
||||
|
||||
|
|
@ -167,7 +168,7 @@ and may be set in the config file.
|
|||
--acd-client-id string OAuth Client Id
|
||||
--acd-client-secret string OAuth Client Secret
|
||||
--acd-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
|
||||
--acd-templink-threshold SizeSuffix Files >= this size will be downloaded via their tempLink. (default 9G)
|
||||
--acd-templink-threshold SizeSuffix Files >= this size will be downloaded via their tempLink. (default 9Gi)
|
||||
--acd-token string OAuth Access Token as a JSON blob.
|
||||
--acd-token-url string Token server url.
|
||||
--acd-upload-wait-per-gb Duration Additional time per GiB to wait after a failed complete upload to see if it appears. (default 3m0s)
|
||||
|
|
@ -175,7 +176,7 @@ and may be set in the config file.
|
|||
--azureblob-access-tier string Access tier of blob: hot, cool or archive.
|
||||
--azureblob-account string Storage Account Name (leave blank to use SAS URL or Emulator)
|
||||
--azureblob-archive-tier-delete Delete archive tier blobs before overwriting.
|
||||
--azureblob-chunk-size SizeSuffix Upload chunk size (<= 100 MiB). (default 4M)
|
||||
--azureblob-chunk-size SizeSuffix Upload chunk size (<= 100 MiB). (default 4Mi)
|
||||
--azureblob-disable-checksum Don't store MD5 checksum with object metadata.
|
||||
--azureblob-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8)
|
||||
--azureblob-endpoint string Endpoint for the service
|
||||
|
|
@ -193,8 +194,8 @@ and may be set in the config file.
|
|||
--azureblob-use-emulator Uses local storage emulator if provided as 'true' (leave blank if using real azure storage endpoint)
|
||||
--azureblob-use-msi Use a managed service identity to authenticate (only works in Azure)
|
||||
--b2-account string Account ID or Application Key ID
|
||||
--b2-chunk-size SizeSuffix Upload chunk size. Must fit in memory. (default 96M)
|
||||
--b2-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4G)
|
||||
--b2-chunk-size SizeSuffix Upload chunk size. Must fit in memory. (default 96Mi)
|
||||
--b2-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4Gi)
|
||||
--b2-disable-checksum Disable checksums for large (> upload cutoff) files
|
||||
--b2-download-auth-duration Duration Time before the authorization token will expire in s or suffix ms|s|m|h|d. (default 1w)
|
||||
--b2-download-url string Custom endpoint for downloads.
|
||||
|
|
@ -205,7 +206,7 @@ and may be set in the config file.
|
|||
--b2-memory-pool-flush-time Duration How often internal memory buffer pools will be flushed. (default 1m0s)
|
||||
--b2-memory-pool-use-mmap Whether to use mmap buffers in internal memory pool.
|
||||
--b2-test-mode string A flag string for X-Bz-Test-Mode header for debugging.
|
||||
--b2-upload-cutoff SizeSuffix Cutoff for switching to chunked upload. (default 200M)
|
||||
--b2-upload-cutoff SizeSuffix Cutoff for switching to chunked upload. (default 200Mi)
|
||||
--b2-versions Include old versions in directory listings.
|
||||
--box-access-token string Box App Primary Access Token
|
||||
--box-auth-url string Auth server URL.
|
||||
|
|
@ -218,12 +219,12 @@ and may be set in the config file.
|
|||
--box-root-folder-id string Fill in for rclone to use a non root folder as its starting point.
|
||||
--box-token string OAuth Access Token as a JSON blob.
|
||||
--box-token-url string Token server url.
|
||||
--box-upload-cutoff SizeSuffix Cutoff for switching to multipart upload (>= 50 MiB). (default 50M)
|
||||
--box-upload-cutoff SizeSuffix Cutoff for switching to multipart upload (>= 50 MiB). (default 50Mi)
|
||||
--cache-chunk-clean-interval Duration How often should the cache perform cleanups of the chunk storage. (default 1m0s)
|
||||
--cache-chunk-no-memory Disable the in-memory cache for storing chunks during streaming.
|
||||
--cache-chunk-path string Directory to cache chunk files. (default "$HOME/.cache/rclone/cache-backend")
|
||||
--cache-chunk-size SizeSuffix The size of a chunk (partial file data). (default 5M)
|
||||
--cache-chunk-total-size SizeSuffix The total size that the chunks can take up on the local disk. (default 10G)
|
||||
--cache-chunk-size SizeSuffix The size of a chunk (partial file data). (default 5Mi)
|
||||
--cache-chunk-total-size SizeSuffix The total size that the chunks can take up on the local disk. (default 10Gi)
|
||||
--cache-db-path string Directory to store file structure metadata DB. (default "$HOME/.cache/rclone/cache-backend")
|
||||
--cache-db-purge Clear all the cached data for this remote on start.
|
||||
--cache-db-wait-time Duration How long to wait for the DB to be available - 0 is unlimited (default 1s)
|
||||
|
|
@ -239,13 +240,13 @@ and may be set in the config file.
|
|||
--cache-tmp-wait-time Duration How long should files be stored in local cache before being uploaded (default 15s)
|
||||
--cache-workers int How many workers should run in parallel to download chunks. (default 4)
|
||||
--cache-writes Cache file data on writes through the FS
|
||||
--chunker-chunk-size SizeSuffix Files larger than chunk size will be split in chunks. (default 2G)
|
||||
--chunker-chunk-size SizeSuffix Files larger than chunk size will be split in chunks. (default 2Gi)
|
||||
--chunker-fail-hard Choose how chunker should handle files with missing or invalid chunks.
|
||||
--chunker-hash-type string Choose how chunker handles hash sums. All modes but "none" require metadata. (default "md5")
|
||||
--chunker-remote string Remote to chunk/unchunk.
|
||||
--compress-level int GZIP compression level (-2 to 9). (default -1)
|
||||
--compress-mode string Compression mode. (default "gzip")
|
||||
--compress-ram-cache-limit SizeSuffix Some remotes don't allow the upload of files with unknown size. (default 20M)
|
||||
--compress-ram-cache-limit SizeSuffix Some remotes don't allow the upload of files with unknown size. (default 20Mi)
|
||||
--compress-remote string Remote to compress.
|
||||
-L, --copy-links Follow symlinks and copy the pointed to item.
|
||||
--crypt-directory-name-encryption Option to either encrypt directory names or leave them intact. (default true)
|
||||
|
|
@ -260,7 +261,7 @@ and may be set in the config file.
|
|||
--drive-allow-import-name-change Allow the filetype to change when uploading Google docs (e.g. file.doc to file.docx). This will confuse sync and reupload every time.
|
||||
--drive-auth-owner-only Only consider files owned by the authenticated user.
|
||||
--drive-auth-url string Auth server URL.
|
||||
--drive-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 8M)
|
||||
--drive-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 8Mi)
|
||||
--drive-client-id string Google Application Client Id
|
||||
--drive-client-secret string OAuth Client Secret
|
||||
--drive-disable-http2 Disable drive using http2 (default true)
|
||||
|
|
@ -290,13 +291,16 @@ and may be set in the config file.
|
|||
--drive-token string OAuth Access Token as a JSON blob.
|
||||
--drive-token-url string Token server url.
|
||||
--drive-trashed-only Only show files that are in the trash.
|
||||
--drive-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 8M)
|
||||
--drive-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 8Mi)
|
||||
--drive-use-created-date Use file created date instead of modified date.,
|
||||
--drive-use-shared-date Use date file was shared instead of modified date.
|
||||
--drive-use-trash Send files to the trash instead of deleting permanently. (default true)
|
||||
--drive-v2-download-min-size SizeSuffix If Object's are greater, use drive v2 API to download. (default off)
|
||||
--dropbox-auth-url string Auth server URL.
|
||||
--dropbox-chunk-size SizeSuffix Upload chunk size. (< 150M). (default 48M)
|
||||
--dropbox-batch-mode string Upload file batching sync|async|off. (default "sync")
|
||||
--dropbox-batch-size int Max number of files in upload batch.
|
||||
--dropbox-batch-timeout Duration Max time to allow an idle upload batch before uploading (default 0s)
|
||||
--dropbox-chunk-size SizeSuffix Upload chunk size. (< 150Mi). (default 48Mi)
|
||||
--dropbox-client-id string OAuth Client Id
|
||||
--dropbox-client-secret string OAuth Client Secret
|
||||
--dropbox-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,RightSpace,InvalidUtf8,Dot)
|
||||
|
|
@ -361,7 +365,7 @@ and may be set in the config file.
|
|||
--http-no-slash Set this if the site doesn't end directories with /
|
||||
--http-url string URL of http host to connect to
|
||||
--hubic-auth-url string Auth server URL.
|
||||
--hubic-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5G)
|
||||
--hubic-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5Gi)
|
||||
--hubic-client-id string OAuth Client Id
|
||||
--hubic-client-secret string OAuth Client Secret
|
||||
--hubic-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8)
|
||||
|
|
@ -370,9 +374,9 @@ and may be set in the config file.
|
|||
--hubic-token-url string Token server url.
|
||||
--jottacloud-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,Del,Ctl,InvalidUtf8,Dot)
|
||||
--jottacloud-hard-delete Delete files permanently rather than putting them into the trash.
|
||||
--jottacloud-md5-memory-limit SizeSuffix Files bigger than this will be cached on disk to calculate the MD5 if required. (default 10M)
|
||||
--jottacloud-md5-memory-limit SizeSuffix Files bigger than this will be cached on disk to calculate the MD5 if required. (default 10Mi)
|
||||
--jottacloud-trashed-only Only show files that are in the trash.
|
||||
--jottacloud-upload-resume-limit SizeSuffix Files bigger than this can be resumed if the upload fail's. (default 10M)
|
||||
--jottacloud-upload-resume-limit SizeSuffix Files bigger than this can be resumed if the upload fail's. (default 10Mi)
|
||||
--koofr-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
|
||||
--koofr-endpoint string The Koofr API endpoint to use (default "https://app.koofr.net")
|
||||
--koofr-mountid string Mount ID of the mount to use. If omitted, the primary mount is used.
|
||||
|
|
@ -387,16 +391,16 @@ and may be set in the config file.
|
|||
--local-no-preallocate Disable preallocation of disk space for transferred files
|
||||
--local-no-set-modtime Disable setting modtime
|
||||
--local-no-sparse Disable sparse files for multi-thread downloads
|
||||
--local-no-unicode-normalization Don't apply unicode normalization to paths and filenames (Deprecated)
|
||||
--local-nounc string Disable UNC (long path names) conversion on Windows
|
||||
--local-zero-size-links Assume the Stat size of links is zero (and read them instead)
|
||||
--local-unicode-normalization Apply unicode NFC normalization to paths and filenames
|
||||
--local-zero-size-links Assume the Stat size of links is zero (and read them instead) (Deprecated)
|
||||
--mailru-check-hash What should copy do if file checksum is mismatched or invalid (default true)
|
||||
--mailru-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
|
||||
--mailru-pass string Password (obscured)
|
||||
--mailru-speedup-enable Skip full upload if there is another file with same data hash. (default true)
|
||||
--mailru-speedup-file-patterns string Comma separated list of file name patterns eligible for speedup (put by hash). (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf")
|
||||
--mailru-speedup-max-disk SizeSuffix This option allows you to disable speedup (put by hash) for large files (default 3G)
|
||||
--mailru-speedup-max-memory SizeSuffix Files larger than the size given below will always be hashed on disk. (default 32M)
|
||||
--mailru-speedup-max-disk SizeSuffix This option allows you to disable speedup (put by hash) for large files (default 3Gi)
|
||||
--mailru-speedup-max-memory SizeSuffix Files larger than the size given below will always be hashed on disk. (default 32Mi)
|
||||
--mailru-user string User name (usually email)
|
||||
--mega-debug Output more debug from Mega.
|
||||
--mega-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
|
||||
|
|
@ -405,7 +409,7 @@ and may be set in the config file.
|
|||
--mega-user string User name
|
||||
-x, --one-file-system Don't cross filesystem boundaries (unix/macOS only).
|
||||
--onedrive-auth-url string Auth server URL.
|
||||
--onedrive-chunk-size SizeSuffix Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10M)
|
||||
--onedrive-chunk-size SizeSuffix Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10Mi)
|
||||
--onedrive-client-id string OAuth Client Id
|
||||
--onedrive-client-secret string OAuth Client Secret
|
||||
--onedrive-drive-id string The ID of the drive to use
|
||||
|
|
@ -421,7 +425,7 @@ and may be set in the config file.
|
|||
--onedrive-server-side-across-configs Allow server-side operations (e.g. copy) to work across different onedrive configs.
|
||||
--onedrive-token string OAuth Access Token as a JSON blob.
|
||||
--onedrive-token-url string Token server url.
|
||||
--opendrive-chunk-size SizeSuffix Files will be uploaded in chunks this size. (default 10M)
|
||||
--opendrive-chunk-size SizeSuffix Files will be uploaded in chunks this size. (default 10Mi)
|
||||
--opendrive-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
|
||||
--opendrive-password string Password. (obscured)
|
||||
--opendrive-username string Username
|
||||
|
|
@ -436,20 +440,20 @@ and may be set in the config file.
|
|||
--premiumizeme-encoding MultiEncoder This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Del,Ctl,InvalidUtf8,Dot)
|
||||
--putio-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
|
||||
--qingstor-access-key-id string QingStor Access Key ID
|
||||
--qingstor-chunk-size SizeSuffix Chunk size to use for uploading. (default 4M)
|
||||
--qingstor-chunk-size SizeSuffix Chunk size to use for uploading. (default 4Mi)
|
||||
--qingstor-connection-retries int Number of connection retries. (default 3)
|
||||
--qingstor-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Ctl,InvalidUtf8)
|
||||
--qingstor-endpoint string Enter an endpoint URL to connection QingStor API.
|
||||
--qingstor-env-auth Get QingStor credentials from runtime. Only applies if access_key_id and secret_access_key is blank.
|
||||
--qingstor-secret-access-key string QingStor Secret Access Key (password)
|
||||
--qingstor-upload-concurrency int Concurrency for multipart uploads. (default 1)
|
||||
--qingstor-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200M)
|
||||
--qingstor-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200Mi)
|
||||
--qingstor-zone string Zone to connect to.
|
||||
--s3-access-key-id string AWS Access Key ID.
|
||||
--s3-acl string Canned ACL used when creating buckets and storing or copying objects.
|
||||
--s3-bucket-acl string Canned ACL used when creating buckets.
|
||||
--s3-chunk-size SizeSuffix Chunk size to use for uploading. (default 5M)
|
||||
--s3-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4.656G)
|
||||
--s3-chunk-size SizeSuffix Chunk size to use for uploading. (default 5Mi)
|
||||
--s3-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4.656Gi)
|
||||
--s3-disable-checksum Don't store MD5 checksum with object metadata
|
||||
--s3-disable-http2 Disable usage of http2 for S3 backends
|
||||
--s3-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
|
||||
|
|
@ -464,6 +468,7 @@ and may be set in the config file.
|
|||
--s3-memory-pool-use-mmap Whether to use mmap buffers in internal memory pool.
|
||||
--s3-no-check-bucket If set, don't attempt to check the bucket exists or create it
|
||||
--s3-no-head If set, don't HEAD uploaded objects to check integrity
|
||||
--s3-no-head-object If set, don't HEAD objects
|
||||
--s3-profile string Profile to use in the shared credentials file
|
||||
--s3-provider string Choose your S3 provider.
|
||||
--s3-region string Region to connect to.
|
||||
|
|
@ -478,7 +483,7 @@ and may be set in the config file.
|
|||
--s3-sse-kms-key-id string If using KMS ID you must provide the ARN of Key.
|
||||
--s3-storage-class string The storage class to use when storing new objects in S3.
|
||||
--s3-upload-concurrency int Concurrency for multipart uploads. (default 4)
|
||||
--s3-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200M)
|
||||
--s3-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200Mi)
|
||||
--s3-use-accelerate-endpoint If true use the AWS S3 accelerated endpoint.
|
||||
--s3-v2-auth If true use v2 authentication.
|
||||
--seafile-2fa Two-factor authentication ('true' if the account has 2FA enabled)
|
||||
|
|
@ -491,6 +496,7 @@ and may be set in the config file.
|
|||
--seafile-user string User name (usually email address)
|
||||
--sftp-ask-password Allow asking for SFTP password when needed.
|
||||
--sftp-disable-concurrent-reads If set don't use concurrent reads
|
||||
--sftp-disable-concurrent-writes If set don't use concurrent writes
|
||||
--sftp-disable-hashcheck Disable the execution of SSH commands to determine if remote file hashing is available.
|
||||
--sftp-host string SSH host to connect to
|
||||
--sftp-idle-timeout Duration Max time before closing idle connections (default 1m0s)
|
||||
|
|
@ -512,11 +518,11 @@ and may be set in the config file.
|
|||
--sftp-use-fstat If set use fstat instead of stat
|
||||
--sftp-use-insecure-cipher Enable the use of insecure ciphers and key exchange methods.
|
||||
--sftp-user string SSH username, leave blank for current username, $USER
|
||||
--sharefile-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 64M)
|
||||
--sharefile-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 64Mi)
|
||||
--sharefile-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,LeftPeriod,RightSpace,RightPeriod,InvalidUtf8,Dot)
|
||||
--sharefile-endpoint string Endpoint for API calls.
|
||||
--sharefile-root-folder-id string ID of the root folder
|
||||
--sharefile-upload-cutoff SizeSuffix Cutoff for switching to multipart upload. (default 128M)
|
||||
--sharefile-upload-cutoff SizeSuffix Cutoff for switching to multipart upload. (default 128Mi)
|
||||
--skip-links Don't warn about skipped symlinks.
|
||||
--sugarsync-access-key-id string Sugarsync Access Key ID.
|
||||
--sugarsync-app-id string Sugarsync App ID.
|
||||
|
|
@ -535,7 +541,7 @@ and may be set in the config file.
|
|||
--swift-auth string Authentication URL for server (OS_AUTH_URL).
|
||||
--swift-auth-token string Auth Token from alternate authentication - optional (OS_AUTH_TOKEN)
|
||||
--swift-auth-version int AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION)
|
||||
--swift-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5G)
|
||||
--swift-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5Gi)
|
||||
--swift-domain string User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME)
|
||||
--swift-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8)
|
||||
--swift-endpoint-type string Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE) (default "public")
|
||||
|
|
@ -561,9 +567,12 @@ and may be set in the config file.
|
|||
--union-create-policy string Policy to choose upstream on CREATE category. (default "epmfs")
|
||||
--union-search-policy string Policy to choose upstream on SEARCH category. (default "ff")
|
||||
--union-upstreams string List of space separated upstreams.
|
||||
--uptobox-access-token string Your access Token, get it from https://uptobox.com/my_account
|
||||
--uptobox-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,BackQuote,Del,Ctl,LeftSpace,InvalidUtf8,Dot)
|
||||
--webdav-bearer-token string Bearer token instead of user/pass (e.g. a Macaroon)
|
||||
--webdav-bearer-token-command string Command to run to get a bearer token
|
||||
--webdav-encoding string This sets the encoding for the backend.
|
||||
--webdav-headers CommaSepList Set HTTP headers for all transactions
|
||||
--webdav-pass string Password. (obscured)
|
||||
--webdav-url string URL of http host to connect to
|
||||
--webdav-user string User name. In case NTLM authentication is used, the username should be in the format 'Domain\User'.
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue