* fs: add TerminalColorMode type
* fs: add new config(flags) for TerminalColorMode
* lib/terminal: use TerminalColorMode to determine how to handle colors
* Add documentation for '--terminal-color-mode'
* tree: remove obsolete --color replaced by global --color
This changes the default behaviour of tree. It now displays colors by
default instead of only displaying them when the flag -C/--color was
active. Old behaviour (no color) can be achieved by setting --color to
'never'.
Fixes: #6604
The previous version used values after the maximum Unicode code-point
to encode a key. This could lead to an overflow since a key is a int16,
a rune is int32 and the maximum Unicode code-point is larger than int16.
A better solution is to simply use negative runes for keys.
Before this change if we copied files of unknown size, then they lost
their metadata.
This was particularly noticeable using --s3-decompress.
This change adds metadata to Rcat and RcatSized and changes Copy to
pass the metadata in when it calls Rcat for an unknown sized input.
Fixes#6546
The current default AnnounceInterval is too short, causing the
multicast domain to be flooded with NOTIFY announcements,
which may prevent other dlna devices from sleeping.
This change allows users to set the announcement interval,
and it's default value also increased to 12 minutes.
Even within the interval, rclone can still passively respond to
M-SEARCH requests from other devices.
Verify the http service listening address and the SSDP server
announcement address to prevent accidental listening of IPv6 addresses
that do not support dlna yet and may be globally accessible.
Unlistened addresses on the interface will also be filtered out of the
SSDP announcement to avoid misleading other services in the multicast domain.
Before this change, if the a mount was created via the rc but unmounted
externally with `fusermount -u` say, rclone would still believe the mount
was active when it wasn't.
Changes in github.com/anacrolix/dms changed upnp.ServiceURN to include a
namespace identifier. This identifier was previously hardcoded, but is
now parsed out of the URN. The old SOAP action header parsing logic was
duplicated in rclone and did not handle this field. Resulting responses
included a URN with an empty namespace identifier, breaking clients.
Before this change, rclone serve sftp operating with a new rclone
after the md5sum/sha1sum detection was reworked to just run a plain
`md5sum`/`sha1sum` command in
3ea82032e7 sftp: support md5/sha1 with rsync.net #3254
Failed to signal to the remote that md5sum/sha1sum wasn't supported as
in
71e172a139 serve/sftp: support empty "md5sum" and "sha1sum" commands
We unconditionally return good hashes even if the remote being served
doesn't support the hash type in question.
This fix checks the hash type is supported and returns an error
MD5 hash not supported
When the backend is first contacted this will cause the sftp backend
to detect that the hash type isn't available.
Unfortunately this may have cached the wrong state so editing or
remaking the config may be necessary to fix it.
strings.Title has been deprecated since Go 1.18 and an alternative has been
available since Go 1.0. The rule Title uses for word boundaries does not handle
Unicode punctuation properly. Use golang.org/x/text/cases instead.
This change ensures we call the Shutdown method on backends when
they drop out of the fs/cache and at program exit.
Some backends implement the optional fs.Shutdowner interface. Until now,
Shutdown is only checked and called, when a backend is wrapped (e.g.
crypt, compress, ...).
To have a general way to perform operations at the end of the backend
lifecycle with proper error handling, we can call Shutdown at cache
clear time.
We add a finalize hook to the cache which will be called when values
drop out of the cache.
Previous discussion: https://forum.rclone.org/t/31336
The https://github.com/nsf/termbox-go library is no longer maintained
so this change replaces it with the maintained
github.com/gdamore/tcell library which has a termbox backwards
compatibility layer.
There are a few minor changes from the termbox library:
- Using Clear with fg bg ColorDefault resulted in a white background for some reason.
- Clear with fg ColorWhite bg ColorBlack was used instead.
- tcell's termbox wrapper doesn't support ColorLightYellow.
- ColorYellow + 8 was used instead.
If the remote on the command line is "remote:subdir", when
deleting "filename", the confirmation message shows the path
"remote:subdirfilename".
Using fspath.JoinRootPath() fixes this. Also use this function
and fs.ConfigString() in other parts of the file, since they
are more appropriate.
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Some backends may not provide size for all objects, and instead
return -1. Existing version included these in directory sums,
with strange results. With this commit rclone ncdu will consider
negative sizes as zero, but add a new prefix flag '~' with a
description that indicates the shown size is inaccurate.
Fixes#6084
In this commit
f4c40bf79d mount: add --devname to set the device name sent to FUSE for mount display
The --devname parameter was added. However it was soon noticed that
attempting to mount via the rc gave this error:
mount helper error: fusermount: unknown option 'fsname'
mount FAILED: fusermount: exit status 1
This was because the DeviceName (and VolumeName) parameter was never
being initialised when the mount was called via the rc.
The fix for this was to refactor the rc interface so it called the
same Mount method as the command line mount which initialised the
DeviceName and VolumeName parameters properly.
This also fixes the cmd/mount tests which were breaking in the same
way but since they aren't normally run on the CI we didn't notice.
Fixes#6044
Before this change, the device name was always the remote:path rclone
was configured with. However this can contain sensitive information
and it appears in the `mount` output, so `--devname` allows the user
to configure it.
See: https://forum.rclone.org/t/rclone-mount-blomp-problem/29151/11
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This link appears to be broken, so here is another reference to (I think) the same file that provides a good example of coba. We could also do the current commit 8312004f41/cli/cobra.go although it might be better to maintain an up to date example.
Previously only the fs being checked on gets passed to
GetModifyWindow(). However, in most tests, the test files are
generated in the local fs and transferred to the remote fs. So the
local fs time precision has to be taken into account.
This meant that on Windows the time tests failed because the
local fs has a time precision of 100ns. Checking remote items uploaded
from local fs on Windows also requires a modify window of 100ns.
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
Before this fix, rclone only generated an RSA server key when the user
didn't supply a key.
However the RSA server key is being deprecated as it is now insecure.
This patch generates an ECDSA server key too which will be used in
preference over the RSA key, but the RSA key will carry on working.
Fixes#5671
This patch will:
- add --daemon-wait flag to control the time to wait for background mount
- remove dependency on sevlyar/go-daemon and implement backgrounding directly
- avoid setsid during backgrounding as it can result in race under Automount
- provide a fallback PATH to correctly run `fusermount` under systemd as it
runs mount units without standard environment variables
- correctly handle ^C pressed while background process is being setting up
Current way of checking whether mountpoint has been already mounted (directory
list) can result in race if rclone runs under Automount (classic or systemd).
This patch adopts Linux ProcFS for the check. Note that mountpoint is considered
empty if it's tagged as "mounted" by autofs. Also ProcFS is used to check whether
rclone mount was successful (ie. tagged by a string containing "rclone").
On macOS/BSD where ProcFS is unavailable the old method is still used.
This patch also moves a few utility functions unchanged to utils.go:
CheckOverlap, CheckAllowings, SetVolumeName.
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
Switched from talking about "unchanged" files to "identical" files.
I found out the hard way that the rclone copy will overwrite newer files.
Looking at posts in the rclone forum, this is a common experience.
The docs for copy have referred to "unchanged" files.
This is ambiguous because it intuitively introduces a sense
of chronology, but chronology is irrelevant.
Rclone only "cares" about difference, not change.
Signal handling by the `atexit` package needs acceess to
`exitCodeUncategorizedError`. With this change all exit status values
are moved to a dedicated package so that they can be reused.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
