Before this change the b2 backend listed all the buckets to turn a
single bucket name into an ID.
However in July 26, 2018 a parameter was added to the list buckets API
to make listing all the buckets unecessary.
This code sets the bucketName parameter so that only the results for
the desired bucket are returned.
The improved upload logic is active by default in uplink v1.12.0, so the
`testuplink.WithConcurrentSegmentUploadsDefaultConfig(ctx)` is not
required anymore.
See https://github.com/rclone/rclone/pull/7198
Before this change uploaded files could return the error "replication
in progress".
This error is harmless though and means the Close should be retried
which is what this patch does.
In this commit we discovered a problem with objects being uploaded to
the incorrect object name. It added an integration test for the
problem.
65b2e378e0 drive: fix incorrect remote after Update on object
This test was tripped by the hdfs backend and this patch fixes the
problem.
Sometimes opendrive reports "403 Folder is already deleted" on
directories which should exist.
This might be a bug in opendrive or in rclone however we work-around
here sufficient to get the tests passing.
ChangeNotify has been broken on the compress backend for a long time!
Before this change it was wrapping the file names received rather than
unwrapping them to discover the original names.
It is likely ChangeNotify was working adequately though for users as
the VFS just uses the directories rather than the file names.
Before this change the concurrency used for an upload was rather
inconsistent.
- if size below `--backend-upload-cutoff` (default 200M) do single part upload.
- if size below `--multi-thread-cutoff` (default 256M) or using streaming
uploads (eg `rclone rcat) do multipart upload using
`--backend-upload-concurrency` to set the concurrency used by the uploader.
- otherwise do multipart upload using `--multi-thread-streams` to set the
concurrency.
This change makes the default for the concurrency used be the
`--backend-upload-concurrency`. If `--multi-thread-streams` is set and larger
than the `--backend-upload-concurrency` then that will be used instead.
This means that if the user sets `--backend-upload-concurrency` then it will be
obeyed for all multipart/multi-thread transfers and the user can override them
all with `--multi-thread-streams`.
See: #7056
Before this change, b2 would return an error when opening a link
generated by `rclone link`. The following error occurs when the object
path contains an ampersand that is not percent encoded:
{
"code": "bad_request",
"message": "Bad character in percent-encoded string: 38 (0x26)",
"status": 400
}
Before this change the box backend could make errors like
Error "not_found" (404): On-Behalf-Of User not found ([123 34 105 110
118 97 108 105 100 95 117 115 101 114 95 105 100 34 58 123 34 105 100
34 58 34 48 48 48 48 48 48 48 48 48 48 48 34 125 125])
This fixes it to produce this instead
Error "not_found" (404): On-Behalf-Of User not found ({"invalid_user_id":{"id":"00000000000"}})
This implements the OpenChunkWriter interface for b2 which
enables multi-thread uploads.
This makes the memory controls of the s3 backend inoperative; they are
replaced with the global ones.
--b2-memory-pool-flush-time
--b2-memory-pool-use-mmap
By using the buffered reader this fixes excessive memory use when
uploading large files as it will share memory pages between all
readers.
This implements the OpenChunkWriter interface for azureblob which
enables multi-thread uploads.
This makes the memory controls of the s3 backend inoperative; they are
replaced with the global ones.
--azureblob-memory-pool-flush-time
--azureblob-memory-pool-use-mmap
By using the buffered reader this fixes excessive memory use when
uploading large files as it will share memory pages between all
readers.
This makes the memory controls of the s3 backend inoperative and
replaced with the global ones.
--s3-memory-pool-flush-time
--s3-memory-pool-use-mmap
By using the buffered reader this fixes excessive memory use when
uploading large files as it will share memory pages between all
readers.
Fixes#7141
As an extra security feature some FTP servers (eg FileZilla) require
that the data connection re-use the same TLS connection as the control
connection. This is a good thing for security.
The message "TLS session of data connection not resumed" means that it
was not done.
The problem turned out to be that rclone was re-using the TLS session
cache between concurrent connections so the resumed TLS data
connection could from any of the control connections.
This patch makes each TLS connection have its own session cache which
should fix the problem.
This also reverts the ftp library to the upstream version which now
contains all of our patches.
Fixes#7234
storj.io/uplink v1.11.0 comes with an improved logic for uploading large
files where file segments are uploaded concurrently instead of serially.
This allows to fully utilize the network connection during the entire
upload process.
This change enable the new upload logic.
The Swift backend does not always respect the flag telling it to skip
HEADing zero-length objects. This commit fixes that for ls/lsl/lsf.
Swift returns zero length for dynamic large object files when they're
included in a files lookup, which means that determining their size
requires HEADing each file that returns a size of zero. rclone's
--swift-no-large-objects instructs rclone that no large objects are
present and accordingly rclone should not HEAD files that return zero
length.
When rclone is performing an ls / lsf / lsl type lookup, however, it
continues to HEAD any zero length objects it encounters, even with
this flag set. Accordingly, this change causes rclone to respect the
flag in these situations.
NB: It is worth noting that this will cause rclone to incorrectly
report zero length for any dynamic large objects encountered with the
--swift-no-large-objects flag set.
Before this change, rclone always expected --sftp-path-override to be
the absolute SSH path to remote:path/subpath which effectively made it
unusable for wrapped remotes (for example, when used with a crypt
remote, the user would need to provide the full decrypted path.)
After this change, the old behavior remains the default, but dynamic
paths are now also supported, if the user adds '@' as the first
character of --sftp-path-override. Rclone will ignore the '@' and
treat the rest of the string as the path to the SFTP remote's root.
Rclone will then add any relative subpaths automatically (including
unwrapping/decrypting remotes as necessary).
In other words, the path_override config parameter can now be used to
specify the difference between the SSH and SFTP paths. Once specified
in the config, it is no longer necessary to re-specify for each
command.
See: https://forum.rclone.org/t/sftp-path-override-breaks-on-wrapped-remotes/40025
This allows using an external ssh binary instead of the built in ssh
library for making SFTP connections.
This makes another integration test target TestSFTPRcloneSSH:
Fixes#7012
Before this change we released the ssh connection back to the pool
before the upload was finished.
This meant that uploads were re-using the same ssh connection which
reduces throughput.
This releases the ssh connection back to the pool only after the
upload has finished, or on error state.
See: https://forum.rclone.org/t/sftp-backend-opens-less-connection-than-expected/40245
smb2.File implements the WriterAtCloser interface defined in
fs/types.go. Expose it via a OpenWriterAt method on
the fs struct to support multi-threaded writes.
The error is:
Error: failed to configure token with jwt authentication: jwtutil: failed making auth request: 400 Bad Request
With the following additional debug information:
jwtutil: Response Body: {"error":"invalid_grant","error_description":"Please check the 'aud' claim. Should be a string"}
Problem is that in jwt-go the RegisteredClaims type has Audience field (aud claim) that
is a list, while box apparantly expects it to be a singular string. In jwt-go v4 we
currently use there is an alternative type StandardClaims which matches what box wants.
Unfortunately StandardClaims is marked as deprecated, and is removed in the
newer v5 version, so we this is a short term fix only.
Fixes#7114
Before this change the new partial downloads code was causing symlinks
to be copied as regular files.
This was because the partial isn't named .rclonelink so the local
backend saves it as a normal file and renaming it to .rclonelink
doesn't cause it to become a symlink.
This fixes the problem by not copying .rclonelink files using the
partials mechanism but reverting to the previous --inplace behaviour.
This could potentially be fixed better in the future by changing the
local backend Move to change files to and from symlinks depending on
their name. However this was deemed too complicated for a point
release.
This also adds a test in the local backend. This test should ideally
be in operations but it isn't easy to put it there as operations knows
nothing of symlinks.
Fixes#7101
See: https://forum.rclone.org/t/reggression-in-v1-63-0-links-drops-the-rclonelink-extension/39483
Before this change if a directory entry could be listed but not
lstat-ed then rclone would give an error and abort the directory
listing with the error
failed to read directory entry: failed to read directory "XXX": lstat XXX
This change makes sure that the directory listing carries on even
after this kind of error.
The sync will be failed but it will carry on.
This problem was caused by a programming error setting the err
variable in an outer scope when it should have been using a local err
variable.
See: https://forum.rclone.org/t/sync-aborts-if-even-one-single-unreadable-folder-is-encountered/39653
Before this change, if you mounted the root of the smb then it would
give an error on rclone about and periodically in the mount logs:
Statfs failed: bucket or container name is needed in remote
This fix makes the smb backend return empty usage in this case which
will stop the errors and show the default 1P of free space.
See: https://forum.rclone.org/t/error-statfs-failed-bucket-or-container-name-is-needed-in-remote/39631
This introduces a new fs.Option flag, Sensitive and uses this along
with IsPassword to redact the info in the config file for support
purposes.
It adds this flag into backends where appropriate. It was necessary to
add oauthutil.SharedOptions to some backends as they were missing
them.
Fixes#5209
Fix https://github.com/rclone/rclone/issues/7103
Before this change the RegExp validating the endpoint URL was a bit
too strict allowing only /dav/files/USER due to chunking limitations.
This patch adds back support for /dav/files/USER/dir/subdir etc.
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
This reverts commit 9065e921c1.
It turns out the problem for the failing fs/sync tests was the
policies being different for search and create which meant that the
file was being created in one union branch but a diferent one was
found in another branch.
The API seems to have changed and the `totalFileCount` item no longer
tracks the number of files in the directory so is useless for seeing
if the directory is empty.
This patch fixes the problem by seeing whether there are any files or
directories in the folder instead.
This problem was detected by the integration tests.
For some unknown reason the API sometimes returns the name already
exists on a server side copy.
{
"error_id": null,
"error_message": "Name already exist",
"error_type": "NAME_ALREADY_EXIST",
"error_uri": "http://api.put.io/v2/docs",
"extra": {},
"status": "ERROR",
"status_code": 400
}
This patch uploads to a temporary name then renames it which works
around the problem.
This was spotted by the integration tests.
The integration tests spotted that modification times are no longer
being preserved by the putio API in server side move and copy.
This patch explicitly sets the modtime after the server side move or
copy.
In this commit we enabled PartialUploads for the union backend.
3faa84b47c combine,compress,crypt,hasher,union: support wrapping backends with PartialUploads
This turns out to cause test failures in fs/sync so this commit
disables them again pending further investigation.
At some point the sharefile API changed to require the size of the
file in the initial transaction which makes the streaming upload fail
with this error:
upload failed: file size does not match (-2)
This was discovered by the integration tests.
In this commit we discovered a problem with objects being uploaded to
the incorrect object name. It added an integration test for the
problem.
65b2e378e0 drive: fix incorrect remote after Update on object
This test was tripped by the putio backend and this patch fixes the
problem.
Before this patch the Update method had a 50/50 chance of returning
the old object rather than the new updated object.
This was discovered in the integration tests.
This patch fixes the problem by deleting the duplicate object before
we look for the new object.
In this commit we discovered a problem with objects being uploaded to
the incorrect object name. It added an integration test for the
problem.
65b2e378e0 drive: fix incorrect remote after Update on object
This test was tripped by the Storj backend and this patch fixes the
problem.
Storj has a rate limit of 1 per second when uploading to the same
file.
This was being tripped by the integration tests.
This patch fixes it by detecting the error and sleeping for 1 second
before retrying.
See: https://github.com/storj/uplink/issues/149
Before this change a server side copy did not preserve the modtime.
This used to work on nextcloud but at some point it started ignoring
the `X-Oc-Mtime` header.
This patch sets the modtime explicitly after a server side copy if the
`X-Oc-Mtime` wasn't accepted.
This problem was discovered in the integration tests.
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
See #7038
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
See #7038
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
Fixes#7038
This commit
3567a47258 fs: make ConfigString properly reverse suffixed file systems
made fs.ConfigString() return the full config of the backend. Because
mount was using this to make a volume name it started to make volume
names with illegal characters in which couldn't be mounted by macOS.
This fixes the problem by making a separate fs.ConfigStringFull() and
using that where appropriate and leaving the original
fs.ConfigString() function untouched.
Fixes#7063
See: https://forum.rclone.org/t/1-63-beta-fails-to-mount-on-macos-with-on-the-fly-crypt-remote/39090
Zoho has started returning the results from Range: requests with a 200
response code rather than the technically correct 206 error code.
Before this change this triggered workaround code to deal with Zoho
not obeying Range: requests properly.
This fix tests the returned header for a Content-Range: header and if
it exists assumes it is a valid reply to the Range: request despite
the status being 200.
This problem was spotted by the integration tests.
Before this fix, if the upload failed for some reason the yandex
backend would attempt to retry itself it which would fail immediately
with 400 Bad Request.
Normally we retry uploads at a higher level so they can be done with
new data and this patch does that.
See #7044
Before this change the Errors type in the union backend produced
errors which could not be Unwrapped to test their type.
This adds the (go1.20) Unwrap method to the Errors type which allows
errors.Is to work on these errors.
It also adds unit tests for the Errors type and fixes a couple of
minor bugs thrown up in the process.
See: https://forum.rclone.org/t/failed-to-set-modification-time-1-error-pcloud-cant-set-modified-time/38596
Set this automatically for any backend which implements UnWrap and
manually for combine and union which can't implement UnWrap but do
overlay other backends.
Before this change, the Pikpak backend would always download
the first media item whenever possible, regardless of whether
or not it was the original contents.
Now we check the validity of a media link using the `fid`
parameter in the link URL.
Fixes#6992
Before this change the pikpak backend changed the global
--multi-thread-streams flag which wasn't desirable.
Now the machinery is in place to use the NoMultiThreading feature flag
instead.
Fixes#6915
Some servers return a 501 error when using MLST on a non-existing
directory. This patch allows it.
I don't think this is correct usage according to the RFC, but the RFC
doesn't explicitly state which error code should be returned for
file/directory not found.
Before this fix a blank line in the MLST output from the FTP server
would cause the "unsupported LIST line" error.
This fixes the problem in the upstream fork.
Fixes#6879
Implement a Partialuploads feature flag to mark backends for which
uploads are not atomic.
This is set for the following backends
- local
- ftp
- sftp
See #3770
Before this change rclone used a normal SFTP rename if present to
implement Move.
However the normal SFTP rename won't overwrite existing files.
This fixes it to either use the POSIX rename extension
("posix-rename@openssh.com") or to delete the source first before
renaming using the normal SFTP rename.
This isn't normally a problem as rclone always removes any existing
objects first, however to implement non --inplace operations we do
require overwriting an existing file.
This also produces a warning when rclone detects files have been
blocked because of virus content
server reports this file is infected with a virus - use --onedrive-av-override to download anyway
Fixes#557
Before this change, when Object.Update was called in the drive
backend, it overwrote the remote with that of the object info.
This is incorrect - the remote doesn't change on Update and this patch
fixes that and introduces a new test to make sure it is correct for
all backends.
This was noticed when doing Update of objects in a nested combine
backend.
See: https://forum.rclone.org/t/rclone-runtime-goroutine-stack-exceeds-1000000000-byte-limit/37912
Before this change if the storage class wasn't set on the object, we
didn't set the "tier" metadata.
This made it impossible to filter on tier using the metadata filters.
This returns the "tier" metadata as STANDARD if the storage class
isn't set on the object.
See: https://forum.rclone.org/t/copy-from-s3-to-another-s3-filter-by-storage-class/37861
- Report correct feature flag
- Fix test failures due to that
- don't output the root directory marker
- Don't create the directory marker if it is the bucket or root
- Create directories when uploading files
- Report correct feature flag
- Fix test failures due to that
- don't output the root directory marker
- Don't create the directory marker if it is the bucket or root
- Create directories when uploading files
Before this change, drive would mistakenly identify a folder with a
training slash as a file when passed to NewObject.
This was picked up by the integration tests
In an earlier patch
d5afcf9e34 crypt: try not to return "unexpected EOF" error
This introduced a bug for 0 length files which this fixes which only
manifests if the io.Reader returns data and EOF which not all readers
do.
This was failing in the integration tests.
Before this change using /path/to/file.rclonelink would not find the
file when using -l/--links.
This fixes the problem by doing another stat call if the file wasn't
found without the suffix if -l/--links is in use.
It will also give an error if you refer to a symlink without its
suffix which will not work because the limit to a single file
filtering will be using the file name without the .rclonelink suffix.
need ".rclonelink" suffix to refer to symlink when using -l/--links
Before this change it would use the symlink as a directory which then
would fail when listed.
See: #6855
golang.org/x/oauth2/jws is deprecated: this package is not intended for public use and
might be removed in the future. It exists for internal use only. Please switch to another
JWS package or copy this package into your own source tree.
github.com/golang-jwt/jwt/v4 seems to be a good alternative, and was already
an implicit dependency.
This changes crypt's use of sync.Pool: Instead of storing slices
it now stores pointers pointers fixed sized arrays.
This issue was reported by staticcheck:
SA6002 - Storing non-pointer values in sync.Pool allocates memory
A sync.Pool is used to avoid unnecessary allocations and reduce
the amount of work the garbage collector has to do.
When passing a value that is not a pointer to a function that accepts
an interface, the value needs to be placed on the heap, which means
an additional allocation. Slices are a common thing to put in sync.Pools,
and they're structs with 3 fields (length, capacity, and a pointer to
an array). In order to avoid the extra allocation, one should store
a pointer to the slice instead.
See: https://staticcheck.io/docs/checks#SA6002
This change provides the ability to pass `env_auth` as a parameter to
the drive provider. This enables the provider to pull IAM
credentials from the environment or instance metadata. Previously if no
auth method was given it would default to requesting oauth.
Before this change, change notify would pick up files which were
shared with us as well as file within the drive.
When using an encrypted mount this caused errors like:
ChangeNotify was unable to decrypt "Plain file name": illegal base32 data at input byte 5
The fix tells drive to restrict changes to the drive in use.
Fixes#6771
Before this change the code wasn't taking into account the error
io.ErrUnexpectedEOF that io.ReadFull can return properly. Sometimes
that error was being returned instead of a more specific and useful
error.
To fix this, io.ReadFull was replaced with the simpler
readers.ReadFill which is much easier to use correctly.
Apparently the abort multipart upload call doesn't return while
multipart uploads are in progress on iDrive e2.
This means that if we CTRL-C a multpart upload rclone hangs until the
all parts uploading have completed. However since rclone is uploading
multiple parts at once this doesn't happen until after the entire file
is uploaded.
This was fixed by cancelling the upload context which causes all the
uploads to stop instantly.
When using ssh-agent to hold multiple keys, it is common practice to configure
openssh to use a specific key by setting the corresponding public key as
the `IdentityFile`. This change makes a similar behavior possible in rclone
by having it parse the `key_file` config as the public key when
`key_use_agent` is `true`.
rclone already attempted this behavior before this change, but it assumed that
`key_file` is the private key and that the public key is specified in
`${key_file}.pub`. So for parity with the openssh behavior, this change makes
rclone first attempt to read the public key from `${key_file}.pub` as before
(for the sake of backward compatibility), then fall back to reading it from
`key_file`.
Fixes#6791
