Before this change using /path/to/file.rclonelink would not find the
file when using -l/--links.
This fixes the problem by doing another stat call if the file wasn't
found without the suffix if -l/--links is in use.
It will also give an error if you refer to a symlink without its
suffix which will not work because the limit to a single file
filtering will be using the file name without the .rclonelink suffix.
need ".rclonelink" suffix to refer to symlink when using -l/--links
Before this change it would use the symlink as a directory which then
would fail when listed.
See: #6855
Before this fix, a dangling symlink was erroring the sync. It was
writing an ERROR log and causing rclone to exit with an error. The
List method wasn't returning an error though.
This fix makes sure that we don't log or report a global error on a
file/directory that has been excluded.
This feature was first implemented in:
a61d219bc local: fix -L/--copy-links with filters missing directories
Then fixed in:
8d1fff9a8 local: obey file filters in listing to fix errors on excluded files
This commit also adds test cases for the failure modes of those commits.
See #6376
In this commit
8d1fff9a82 local: obey file filters in listing to fix errors on excluded files
We introduced the concept of local backend filters.
Unfortunately the filters were being applied before we had resolved
the symlink to point to a directory. This meant that symlinks pointing
to directories were filtered out when they shouldn't have been.
This was fixed by moving the filter check until after the symlink had
been resolved.
See: https://forum.rclone.org/t/copy-links-not-following-symlinks-on-1-60-0/34073/7
Before this change rclone used statx() to read the metadata for files
from the local filesystem when `-M` was in use.
Unfortunately statx() was only introduced in kernel 4.11 which was
released in April 2017 so there are current systems (eg Centos 7)
still on kernel versions which don't support statx().
This patch checks to see if statx() is available and if it isn't, it
falls back to using fstatat() which was introduced in Linux 2.6.16
which is guaranteed for all Go versions.
See: https://forum.rclone.org/t/metadata-from-linux-local-s3-failed-to-copy-failed-to-read-metadata-from-source-object-function-not-implemented/33233/
In this commit
8d1fff9a82 local: obey file filters in listing to fix errors on excluded files
We started using filters in the local backend so the user could short
circuit troublesome files/directories at a low level.
However this caused a number of integration tests to fail. This turned
out to be in backends wrapping the local backend. For example the
combine backend test failed because it changes the paths passed to the
local backend so they no longer match the paths in the current filter.
To fix this, a new feature flag `FilterAware` was added and the
UseFilter context flag is only passed to backends which support it. As
the wrapping backends don't support the flag, this fixes the problems
in the integration tests.
In future the wrapping backends could modify the active filters to
match the path modifications and then they could set the FilterAware
flag.
See #6376
Before this change, if rclone was run with `-M` on a filesystem
without xattr support, it would error out.
This patch makes rclone detect the not supported errors and disable
xattrs from then on. It prints one ERROR level message about this.
See: https://forum.rclone.org/t/metadata-update-local-s3/32277/7
Before this fix if a file was updated, but to the same length and
timestamp then the local backend would return the wrong (cached)
hashes for the object.
This happens regularly on a crypted local disk mount when the VFS
thinks files have been changed but actually their contents are
identical to that written previously. This is because when files are
uploaded their nonce changes so the contents of the file changes but
the timestamp and size remain the same because the file didn't
actually change.
This causes errors like this:
ERROR: file: Failed to copy: corrupted on transfer: md5 crypted
hash differ "X" vs "Y"
This turned out to be because the local backend wasn't clearing its
cache of hashes when the file was updated.
This fix clears the hash cache for Update and Remove.
It also puts a src and destination in the crypt message to make future
debugging easier.
Fixes#4031
Previously only the fs being checked on gets passed to
GetModifyWindow(). However, in most tests, the test files are
generated in the local fs and transferred to the remote fs. So the
local fs time precision has to be taken into account.
This meant that on Windows the time tests failed because the
local fs has a time precision of 100ns. Checking remote items uploaded
from local fs on Windows also requires a modify window of 100ns.
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
This changes the interface to NewObject so that if NewObject is called
on a directory then it should return fs.ErrorIsDir if possible without
doing any extra work, otherwise fs.ErrorObjectNotFound.
Tested on integration test server with:
go run integration-test.go -tests backend -run TestIntegration/FsMkdir/FsPutFiles/FsNewObjectDir -branch fix-stat -maxtries 1
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
This change fixes the bug described below:
if a file is removed while the local backend List() runs,
the call will flag an accounting error.
The bug manifests itself if local backend is the Sync target
due to intrinsic concurrency.
The odds to hit this bug depend on --checkers and --transfers.
Chunker over local backend is affected even more because
updating a composite object with a smaller size content
translates into removing chunks on the underlying file system
and involves a number of List() calls.
macOS stores files in NFD form and transferring them like this to some
systems causes the Korean language to display incorrectly.
This adds the flag --local-unicode-normalization to optionally
normalize the file names to NFC.
This also removes the (long deprecated) --local-no-unicode-normalization flag
See: https://forum.rclone.org/t/support-for-korean-jaso-conversion/19435
It was discovered on some Android systems, the stat size of a symlink
is different to the size that readlink returns.
This was giving errors like this
transport connection broken: http: ContentLength=30 with Body length 28
There are enough exceptions to the size of readlink being different to
the size of stat that this patch now always does readlink to work out
the size of a symlink.
Since symlinks are relatively uncommon this shouldn't affect
performance too much and will mean that the size is always correct.
This deprecates the --local-zero-size-links flag which is now
effectively always enabled.
See: https://forum.rclone.org/t/problem-with-symlinks-and-links/23840/
Some virtual filesystems (such as Google Drive File Stream) may
incorrectly set the actual file size equal to the preallocated space,
causing checksum and file size checks to fail.
This flag can be used to disable preallocation for local backends of
this type.
Assume the Stat size of links is zero (and read them instead)
On some virtual filesystems (such ash LucidLink), reading a link size via a
Stat call always returns 0.
However, on unix it reads as the length of the text in the link. This may
cause errors like this when syncing:
Failed to copy: corrupted on transfer: sizes differ 0 vs 13
Setting this flag causes rclone to read the link and use that as the size of
the link instead of 0 which in most cases fixes the problem.
Fixes#4950
Signed-off-by: Riccardo Iaconelli <riccardo@kde.org>
Before this change a circular symlink would cause rclone to error out from the listings.
After this change rclone will skip a circular symlink and carry on the listing,
producing an error at the end.
Fixes#4743
This adds a context.Context parameter to NewFs and related calls.
This is necessary as part of reading config from the context -
backends need to be able to read the global config.
Before this change rclone returned the size from the Stat call of the
link. On Windows this reads as 0 always, however on unix it reads as
the length of the text in the link. This caused errors like this when
syncing:
Failed to copy: corrupted on transfer: sizes differ 0 vs 13
This change causes Windows platforms to read the link and use that as
the size of the link instead of 0 which fixes the problem.
- add a directory to the optional Purge interface
- fix up all the backends
- add an additional integration test to test for the feature
- use the new feature in operations.Purge
Many of the backends had been prepared in advance for this so the
change was trivial for them.
If this option is enabled, rclone will not set modtime of uploaded files and
the backend will return ModTimeNotSupported as its Precision.
Normally rclone updates modification time of files after they are done
uploading. This can cause permissions issues on Linux platforms when
rclone is copying to a CIFS mount where the user rclone is
running as does not own the file uploaded. If this option is enabled,
rclone will no longer update the modtime after copying a file.
See: https://forum.rclone.org/t/chtimes-error-on-local-mounted-copy/17784
