Before this fix, doing CTRL-C and CTRL-V on a file in Windows explorer
caused the **source** and the the destination to be truncated to 0.
This is because Windows opens the source file with Create with flags
`O_RDWR|O_CREATE|O_EXCL` but doesn't write to it - it only reads from
it. Rclone was taking the call to Create as a signal to always make a
new file, but this is incorrect.
This fix reads an existing file from the directory if it exists when
Create is called rather than always creating a new one. This fixes the
problem.
Fixes#5181
Before this change, if a directory was renamed and it or any children
had virtual entries in it they weren't flushed.
The consequence of this was that the directory path got out sync with
the actual position of the directory in the tree, leading to listings
of the old directory rather than the new one.
The fix renames any directories remaining after the ForgetAll to have
the correct path which fixes the problem.
See: https://forum.rclone.org/t/after-a-directory-renmane-using-mv-files-are-not-visible-any-longer/22797
When using --vfs-cache-mode writes or full if a file was opened for
write intent, the modtime was set and the file was closed without
being modified the modtime would never be written back to storage.
The sequence of events
- app opens file with write intent
- app does set modtime
- rclone sets the modtime on the cache file, but not the remote file
because it is open for write and can't be set yet
- app closes the file without changing it
- rclone doesn't upload the file because the file wasn't changed so
the modtime doesn't get updated
This fixes the problem by making sure any unapplied modtime changes
are applied even if the file is not modified when being closed.
Fixes#4795
Before this change, rclone would return the modification times of the
cache file or the pending modtime which would be more accurate than
the modtime that the backend was capable of.
This meant that the modtime would be change slightly when the item was
actually uploaded.
For example modification times on Google Drive would be rounded to the
nearest millisecond.
This fixes the VFS layer to always return modtimes directly from an
object stored on the remote, or rounded to the precision that the
remote is capable of.
Before this change, rclone would set the modification time of an
object after it had been uploaded. However with --vfs-cache-mode
writes and above, the modification time of the object is already
correct as the cache backing file gets set with the correct
modification time before upload.
Setting the modification time causes another version to be created on
backends such as S3 so it should be avoided if possible.
This change checks to see if the modification time needs changing and
only sets it if necessary.
See: https://forum.rclone.org/t/produce-2-versions-when-overwrite-an-object-in-min-io/19634
Some backends, most notably S3, do not report the amount of bytes used.
This patch introduces a new flag that allows instead of relying on the
backend, use recursive scan similar to `rclone size` to compute the total
used space. However, this is ineffective and should be used as a last resort.
Co-authored-by: Yves G <theYinYeti@yalis.fr>
Before this change options were read and set in native format. This
means for example nanoseconds for durations or an integer for
enumerated types, which isn't very convenient for humans.
This change enables these types to be set with a string with the
syntax as used in the command line instead, so `"10s"` rather than
`10000000000` or `"DEBUG"` rather than `8` for log level.
The initial ':' is included in the ad-hoc remote name, but is illegal character
in Windows path. Replacing it with '^', which is legal in filesystems but illegal
in regular remote names, so name conflict is avoided.
Fixes#4544
Before this change using --vfs-cache-mode full and --buffer-size 0
together caused the vfs downloader to open more and more downloaders.
This is fixed by introducing a minimum size of 1M for the window to
look for an existing downloader.
Fixes#4892
Add --network-mode option to activate mounting as network drive without having to set volume prefix.
Add support for automatic drive letter assignment (not specific to network drive mounting).
Allow full network share unc path in --volname, which will also implicitely activate network drive mounting.
Allow full network share unc path as mountpoint, which will also implicitely activate network drive mounting, and the specified path will be used as volume prefix and the remote will be mounted on an automatically assigned drive letter instead.
If --cache-dir is passed in as a relative path, then rclone will not
be able to turn it into a UNC path under Windows, which means that
file names longer than 260 chars will fail when stored in the cache.
This patch makes the --cache-dir path absolute before using it.
See: https://forum.rclone.org/t/handling-of-long-paths-on-windows-260-characters/20913
This is done by making fs.Config private and attaching it to the
context instead.
The Config should be obtained with fs.GetConfig and fs.AddConfig
should be used to get a new mutable config that can be changed.
Before this change if a file was uploaded through a mount, then
deleted externally, trying to upload that file again could give EEXIST
"file already exists".
This was because the file already existing in the cache was confusing
rclone into thinking it already had the file.
The fix is to check that if rclone has a stale cache file then to
ignore it in this situation.
See: https://forum.rclone.org/t/rclone-cant-reuse-filenames/20400
Before this change, if a file was created on a remote but deleted
externally from that remote then there was potential for the delete to
never be noticed.
The sequence of events was:
- Create file on VFS - creates virtual directory entry
- File deleted externally to remote before the directory refreshed
- Now the file has a virtual add but is not in the listings so will never disappear
This patch fixes it by removing all virtual directory entries except
the following when the directory is re-read.
- On remotes which can't have empty directories: virtual directory
adds are not flushed. These will remain virtual as long as the
directory is empty.
- For virtual file add: files that are in the process of being
uploaded are not flushed
This patch also adds the distinction between virtually added files and
directories.
It also refactors the virtual directory logic to make it easier to follow.
Fixes#4446
This adds a context.Context parameter to NewFs and related calls.
This is necessary as part of reading config from the context -
backends need to be able to read the global config.
The missed update can cause incorrect before-cleaning cache stats
and a pre-mature condition broadcast in purgeOld before the cache
space use is reduced below the quota.
Add an exponentially increasing delay during retries up ENOSPC error
to avoid exhausting the 10 retries too soon when the cache space
recovery from item resets is not available from the file system yet
or consumed by other large cache writes.
Item reset is invoked by cache cleaner for synchronous recovery
from ENOSPC errors. The reset operation removes the cache file and
closes/reopens the downloaders. Although most parts of reset and
other item operations are done with the item mutex held, the mutex
is released during fd.WriteAt and downloaders calls. We used preAccess
and postAccess calls to serialize Reset, ReadAt, and Open, but missed
some other item operations. The patch adds preAccess/postAccess
calls in Sync, Truncate, Close, WriteAt, and rename.
A failed item reset is saved in the errItems for retryFailedResets
to process. If the item gets closed before the retry, the item may
have been removed from the c.item array. Previous code did not
account for this condition. This patch adds the check for the
exitence of the retry items in retryFailedResets.
The downloaders.Close() call acquires the downloaders' mutex before
calling the wait group wait and the main downloaders thread has a
periodical (5 seconds interval) call to kick its waiters and the
waiter dispatch function tries to get the mutex. So a deadlock can
occur if the Close() call starts, gets the mutex, while the main
downloader thread already got the timer's tick and proceeded to
call kickWaiters. The deadlock happens when the Close call gets
the mutex between the timer's kick and the main downloader thread
gets the mutex first. So it's a pretty short period of time and
it probably explains why the problem has not surfaced, maybe
something like tens of nanoseconds out of 5 seconds (~10^^-8).
It took 5 days of continued stressing the Close calls for the
deadlock to appear.
Before this change if a file was removed from the cache while rclone
is running then rclone would not notice and proceed to re-create it
full of zeros.
This change notices files that we expect to have data in going missing
and if they do logs an ERROR recovers.
It isn't recommended deleting files from the cache manually with
rclone running!
See: https://forum.rclone.org/t/corrupted-data-streaming-after-vfs-meta-files-removed/18997Fixes#4602
Before this change the error message was produced for every file which
was confusing users.
After this change we check for EOF and return from ReadAt at that
point.
See: https://forum.rclone.org/t/rclone-1-53-release/18880/10
This patch provides the support of synchronous cache space recovery
to allow read threads to recover from ENOSPC errors when cache space
can be recovered from cache items that are not in use or safe to be
reset/emptied .
The patch complements the existing cache cleaning process in two ways.
Firstly, the existing cache cleaning process is time-driven that runs
periodically. The cache space can run out while the cache cleaner
thread is still waiting for its next scheduled run. The io threads
encountering ENOSPC return an internal error to the applications
in this case even when cache space can be recovered to avoid this
error. This patch addresses this problem by having the read threads
kick the cache cleaner thread in this condition to recover cache
space preventing unnecessary ENOSPC errors from being seen by the
applications.
Secondly, this patch enhances the cache cleaner to support cache
item reset. Currently the cache purge process removes cache
items that are not in use. This may not be sufficient when the
total size of the working set exceeds the cache directory's
capacity. Like in the current code, this patch starts the purge
process by removing cache files that are not in use. Cache items
whose access times are older than vfs-cache-max-age are removed first.
After that, other not-in-use items are removed in LRU order until
vfs-cache-max-size is reached. If the vfs-cache-max-size (the quota)
is still not reached at this time, this patch adds a cache reset
step to reset/empty cache files that are still in use but not
dirtied. This enables application processes to continue without
seeing an error even when the working set depletes the cache space
as long as there is not a large write working set hoarding the
entire cache space.
By design this patch does not add ENOSPC error recovery for write
IOs. Rclone does not empty a write cache item until the file data
is written back to the backend upon close. Allowing more cache
space to be consumed by dirty cache items when the cache space is
already running low would increase the risk of exhausting the cache
space in a way that the vfs mount becomes unreadable.
Before this change we set the modtime of the cache file when all
writers had finished.
This has the unfortunate effect that the file is uploaded with the
wrong modtime which means on backends which can't set modtimes except
when uploading files it is wrong.
This change sets the modtime of the cache file immediately in the
cache and in turn sets the modtime in the file info.
Before this change the background writing of the file was racing with
the test of the object on the remote.
This meant that the tests passed locally but failed on a lot of the
remotes.
Before this change we didn't check the file exists before renaming it,
setting its modification time or deleting it. If the file isn't in the
cache we don't need to do the action since it has been done on the
actual object, so these errors were producing unecessary log messages.
This change checks to see if the file exists first before doing those
actions.
Before this fix, download threads would fill up the buffer and then
timeout even though data was still being read from them. If the client
was streaming slower than network speed this caused the downloader to
stop and be restarted continuously. This caused more potential for
skips in the download and unecessary network transactions.
This patch fixes that behaviour - as long as a downloader is being
read from more often than once every 5 seconds, it won't timeout.
This was done by:
- kicking the downloader whenever ensureDownloader is called
- making the downloader loop if it has already downloaded past the maxOffset
- making setRange() always kick the downloader
