--- date: 2019-08-26T15:19:45+01:00 title: "rclone serve sftp" slug: rclone_serve_sftp url: /commands/rclone_serve_sftp/ --- ## rclone serve sftp Serve the remote over SFTP. ### Synopsis rclone serve sftp implements an SFTP server to serve the remote over SFTP. This can be used with an SFTP client or you can make a remote of type sftp to use with it. You can use the filter flags (eg --include, --exclude) to control what is served. The server will log errors. Use -v to see access logs. --bwlimit will be respected for file transfers. Use --stats to control the stats printing. You must provide some means of authentication, either with --user/--pass, an authorized keys file (specify location with --authorized-keys - the default is the same as ssh) or set the --no-auth flag for no authentication when logging in. Note that this also implements a small number of shell commands so that it can provide md5sum/sha1sum/df information for the rclone sftp backend. This means that is can support SHA1SUMs, MD5SUMs and the about command when paired with the rclone sftp backend. If you don't supply a --key then rclone will generate one and cache it for later use. By default the server binds to localhost:2022 - if you want it to be reachable externally then supply "--addr :2022" for example. Note that the default of "--vfs-cache-mode off" is fine for the rclone sftp backend, but it may not be with other SFTP clients. ### Directory Cache Using the `--dir-cache-time` flag, you can set how long a directory should be considered up to date and not refreshed from the backend. Changes made locally in the mount may appear immediately or invalidate the cache. However, changes done on the remote will only be picked up once the cache expires. Alternatively, you can send a `SIGHUP` signal to rclone for it to flush all directory caches, regardless of how old they are. Assuming only one rclone instance is running, you can reset the cache like this: kill -SIGHUP $(pidof rclone) If you configure rclone with a [remote control](/rc) then you can use rclone rc to flush the whole directory cache: rclone rc vfs/forget Or individual files or directories: rclone rc vfs/forget file=path/to/file dir=path/to/dir ### File Buffering The `--buffer-size` flag determines the amount of memory, that will be used to buffer data in advance. Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file. This flag is a upper limit for the used memory per file descriptor. The buffer will only use memory for data that is downloaded but not not yet read. If the buffer is empty, only a small amount of memory will be used. The maximum memory used by rclone for buffering can be up to `--buffer-size * open files`. ### File Caching These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system. You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details. Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both. --cache-dir string Directory rclone will use for caching. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-cache-max-size int Max total size of objects in the cache. (default off) If run with `-vv` rclone will print the location of the file cache. The files are stored in the user cache file area which is OS dependent but can be controlled with `--cache-dir` or setting the appropriate environment variable. The cache has 4 different modes selected by `--vfs-cache-mode`. The higher the cache mode the more compatible rclone becomes at the cost of using disk space. Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache. If using --vfs-cache-max-size note that the cache may exceed this size for two reasons. Firstly because it is only checked every --vfs-cache-poll-interval. Secondly because open files cannot be evicted from the cache. #### --vfs-cache-mode off In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk. This will mean some operations are not possible * Files can't be opened for both read AND write * Files opened for write can't be seeked * Existing files opened for write must have O_TRUNC set * Files open for read with O_TRUNC will be opened write only * Files open for write only will behave as if O_TRUNC was supplied * Open modes O_APPEND, O_TRUNC are ignored * If an upload fails it can't be retried #### --vfs-cache-mode minimal This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space. These operations are not possible * Files opened for write only can't be seeked * Existing files opened for write must have O_TRUNC set * Files opened for write only will ignore O_APPEND, O_TRUNC * If an upload fails it can't be retried #### --vfs-cache-mode writes In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first. This mode should support all normal file system operations. If an upload fails it will be retried up to --low-level-retries times. #### --vfs-cache-mode full In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first. This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files. In this mode, unlike the others, when a file is written to the disk, it will be kept on the disk after it is written to the remote. It will be purged on a schedule according to `--vfs-cache-max-age`. This mode should support all normal file system operations. If an upload or download fails it will be retried up to --low-level-retries times. ### Auth Proxy If you supply the parameter `--auth-proxy /path/to/program` then rclone will use that program to generate backends on the fly which then are used to authenticate incoming requests. This uses a simple JSON based protocl with input on STDIN and output on STDOUT. There is an example program [bin/test_proxy.py](https://github.com/rclone/rclone/blob/master/test_proxy.py) in the rclone source code. The program's job is to take a `user` and `pass` on the input and turn those into the config for a backend on STDOUT in JSON format. This config will have any default parameters for the backend added, but it won't use configuration from environment variables or command line options - it is the job of the proxy program to make a complete config. This config generated must have this extra parameter - `_root` - root to use for the backend And it may have this parameter - `_obscure` - comma separated strings for parameters to obscure For example the program might take this on STDIN ``` { "user": "me", "pass": "mypassword" } ``` And return this on STDOUT ``` { "type": "sftp", "_root": "", "_obscure": "pass", "user": "me", "pass": "mypassword", "host": "sftp.example.com" } ``` This would mean that an SFTP backend would be created on the fly for the `user` and `pass` returned in the output to the host given. Note that since `_obscure` is set to `pass`, rclone will obscure the `pass` parameter before creating the backend (which is required for sftp backends). The progam can manipulate the supplied `user` in any way, for example to make proxy to many different sftp backends, you could make the `user` be `user@example.com` and then set the `host` to `example.com` in the output and the user to `user`. For security you'd probably want to restrict the `host` to a limited list. Note that an internal cache is keyed on `user` so only use that for configuration, don't use `pass`. This also means that if a user's password is changed the cache will need to expire (which takes 5 mins) before it takes effect. This can be used to build general purpose proxies to any kind of backend that rclone supports. ``` rclone serve sftp remote:path [flags] ``` ### Options ``` --addr string IPaddress:Port or :Port to bind server to. (default "localhost:2022") --auth-proxy string A program to use to create the backend from the auth. --authorized-keys string Authorized keys file (default "~/.ssh/authorized_keys") --dir-cache-time duration Time to cache directory entries for. (default 5m0s) --dir-perms FileMode Directory permissions (default 0777) --file-perms FileMode File permissions (default 0666) --gid uint32 Override the gid field set by the filesystem. (default 1000) -h, --help help for sftp --key string SSH private key file (leave blank to auto generate) --no-auth Allow connections with no authentication if set. --no-checksum Don't compare checksums on up/download. --no-modtime Don't read/write the modification time (can speed things up). --no-seek Don't allow seeking in files. --pass string Password for authentication. --poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s) --read-only Mount read-only. --uid uint32 Override the uid field set by the filesystem. (default 1000) --umask int Override the permission bits set by the filesystem. (default 2) --user string User name for authentication. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-max-size SizeSuffix Max total size of objects in the cache. (default off) --vfs-cache-mode CacheMode Cache mode off|minimal|writes|full (default off) --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-read-chunk-size SizeSuffix Read the source objects in chunks. (default 128M) --vfs-read-chunk-size-limit SizeSuffix If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off) ``` See the [global flags page](/flags/) for global options not listed here. ### SEE ALSO * [rclone serve](/commands/rclone_serve/) - Serve a remote over a protocol.