// Package chunker provides wrappers for Fs and Object which split large files in chunks package chunker import ( "bytes" "context" "crypto/md5" "crypto/sha1" "encoding/hex" "encoding/json" "fmt" gohash "hash" "io" "io/ioutil" "path" "regexp" "sort" "strconv" "strings" "time" "github.com/pkg/errors" "github.com/rclone/rclone/fs" "github.com/rclone/rclone/fs/accounting" "github.com/rclone/rclone/fs/config/configmap" "github.com/rclone/rclone/fs/config/configstruct" "github.com/rclone/rclone/fs/fspath" "github.com/rclone/rclone/fs/hash" "github.com/rclone/rclone/fs/operations" ) // // Chunker's composite files have one or more chunks // and optional metadata object. If it's present, // meta object is named after the original file. // // The following types of chunks are supported: // data and control, active and temporary. // Chunk type is identified by matching chunk file name // based on the chunk name format configured by user. // // Both data and control chunks can be either temporary or // active (non-temporary). // An operation creates temporary chunks while it runs. // By completion it removes temporary and leaves active // (aka normal aka permanent) chunks. // // Temporary (aka hidden) chunks have a special hardcoded suffix // in addition to the configured name pattern. The suffix comes last // to prevent name collisions with non-temporary chunks. // Temporary suffix includes so called transaction number usually // abbreviated as `xactNo` below, a generic non-negative integer // used by parallel operations to share a composite object. // // Chunker can tell data chunks from control chunks by the characters // located in the "hash placeholder" position of configured format. // Data chunks have decimal digits there. // Control chunks have a short lowercase literal prepended by underscore // in that position. // // Metadata format v1 does not define any control chunk types, // they are currently ignored aka reserved. // In future they can be used to implement resumable uploads etc. // const ( ctrlTypeRegStr = `[a-z]{3,9}` tempChunkFormat = `%s..tmp_%010d` tempChunkRegStr = `\.\.tmp_([0-9]{10,19})` ) var ( ctrlTypeRegexp = regexp.MustCompile(`^` + ctrlTypeRegStr + `$`) ) // Normally metadata is a small piece of JSON (about 100-300 bytes). // The size of valid metadata size must never exceed this limit. // Current maximum provides a reasonable room for future extensions. // // Please refrain from increasing it, this can cause old rclone versions // to fail, or worse, treat meta object as a normal file (see NewObject). // If more room is needed please bump metadata version forcing previous // releases to ask for upgrade, and offload extra info to a control chunk. // // And still chunker's primary function is to chunk large files // rather than serve as a generic metadata container. const maxMetadataSize = 255 // Current/highest supported metadata format. const metadataVersion = 1 // optimizeFirstChunk enables the following optimization in the Put: // If a single chunk is expected, put the first chunk using the // base target name instead of a temporary name, thus avoiding // extra rename operation. // Warning: this optimization is not transaction safe. const optimizeFirstChunk = false // revealHidden is a stub until chunker lands the `reveal hidden` option. const revealHidden = false // Prevent memory overflow due to specially crafted chunk name const maxSafeChunkNumber = 10000000 // standard chunker errors var ( ErrChunkOverflow = errors.New("chunk number overflow") ) // Note: metadata logic is tightly coupled with chunker code in many // places, eg. in checks whether a file should have meta object or is // eligible for chunking. // If more metadata formats (or versions of a format) are added in future, // it may be advisable to factor it into a "metadata strategy" interface // similar to chunkingReader or linearReader below. // Register with Fs func init() { fs.Register(&fs.RegInfo{ Name: "chunker", Description: "Transparently chunk/split large files", NewFs: NewFs, Options: []fs.Option{{ Name: "remote", Required: true, Help: `Remote to chunk/unchunk. Normally should contain a ':' and a path, eg "myremote:path/to/dir", "myremote:bucket" or maybe "myremote:" (not recommended).`, }, { Name: "chunk_size", Advanced: false, Default: fs.SizeSuffix(2147483648), // 2GB Help: `Files larger than chunk size will be split in chunks.`, }, { Name: "name_format", Advanced: true, Default: `*.rclone_chunk.###`, Help: `String format of chunk file names. The two placeholders are: base file name (*) and chunk number (#...). There must be one and only one asterisk and one or more consecutive hash characters. If chunk number has less digits than the number of hashes, it is left-padded by zeros. If there are more digits in the number, they are left as is. Possible chunk files are ignored if their name does not match given format.`, }, { Name: "start_from", Advanced: true, Default: 1, Help: `Minimum valid chunk number. Usually 0 or 1. By default chunk numbers start from 1.`, }, { Name: "meta_format", Advanced: true, Default: "simplejson", Help: `Format of the metadata object or "none". By default "simplejson". Metadata is a small JSON file named after the composite file.`, Examples: []fs.OptionExample{{ Value: "none", Help: `Do not use metadata files at all. Requires hash type "none".`, }, { Value: "simplejson", Help: `Simple JSON supports hash sums and chunk validation. It has the following fields: ver, size, nchunks, md5, sha1.`, }}, }, { Name: "hash_type", Advanced: false, Default: "md5", Help: `Choose how chunker handles hash sums. All modes but "none" require metadata.`, Examples: []fs.OptionExample{{ Value: "none", Help: `Pass any hash supported by wrapped remote for non-chunked files, return nothing otherwise`, }, { Value: "md5", Help: `MD5 for composite files`, }, { Value: "sha1", Help: `SHA1 for composite files`, }, { Value: "md5all", Help: `MD5 for all files`, }, { Value: "sha1all", Help: `SHA1 for all files`, }, { Value: "md5quick", Help: `Copying a file to chunker will request MD5 from the source falling back to SHA1 if unsupported`, }, { Value: "sha1quick", Help: `Similar to "md5quick" but prefers SHA1 over MD5`, }}, }, { Name: "fail_hard", Advanced: true, Default: false, Help: `Choose how chunker should handle files with missing or invalid chunks.`, Examples: []fs.OptionExample{ { Value: "true", Help: "Report errors and abort current command.", }, { Value: "false", Help: "Warn user, skip incomplete file and proceed.", }, }, }}, }) } // NewFs constructs an Fs from the path, container:path func NewFs(name, rpath string, m configmap.Mapper) (fs.Fs, error) { // Parse config into Options struct opt := new(Options) err := configstruct.Set(m, opt) if err != nil { return nil, err } if opt.StartFrom < 0 { return nil, errors.New("start_from must be non-negative") } remote := opt.Remote if strings.HasPrefix(remote, name+":") { return nil, errors.New("can't point remote at itself - check the value of the remote setting") } baseInfo, baseName, basePath, baseConfig, err := fs.ConfigFs(remote) if err != nil { return nil, errors.Wrapf(err, "failed to parse remote %q to wrap", remote) } // Look for a file first remotePath := fspath.JoinRootPath(basePath, rpath) baseFs, err := baseInfo.NewFs(baseName, remotePath, baseConfig) if err != fs.ErrorIsFile && err != nil { return nil, errors.Wrapf(err, "failed to make remote %s:%q to wrap", baseName, remotePath) } if !operations.CanServerSideMove(baseFs) { return nil, errors.New("can't use chunker on a backend which doesn't support server side move or copy") } f := &Fs{ base: baseFs, name: name, root: rpath, opt: *opt, } f.dirSort = true // processEntries requires that meta Objects prerun data chunks atm. if err := f.configure(opt.NameFormat, opt.MetaFormat, opt.HashType); err != nil { return nil, err } // Handle the tricky case detected by FsMkdir/FsPutFiles/FsIsFile // when `rpath` points to a composite multi-chunk file without metadata, // i.e. `rpath` does not exist in the wrapped remote, but chunker // detects a composite file because it finds the first chunk! // (yet can't satisfy fstest.CheckListing, will ignore) if err == nil && !f.useMeta && strings.Contains(rpath, "/") { firstChunkPath := f.makeChunkName(remotePath, 0, "", -1) _, testErr := baseInfo.NewFs(baseName, firstChunkPath, baseConfig) if testErr == fs.ErrorIsFile { err = testErr } } // Note 1: the features here are ones we could support, and they are // ANDed with the ones from wrappedFs. // Note 2: features.Fill() points features.PutStream to our PutStream, // but features.Mask() will nullify it if wrappedFs does not have it. f.features = (&fs.Features{ CaseInsensitive: true, DuplicateFiles: true, ReadMimeType: true, WriteMimeType: true, BucketBased: true, CanHaveEmptyDirectories: true, ServerSideAcrossConfigs: true, }).Fill(f).Mask(baseFs).WrapsFs(f, baseFs) return f, err } // Options defines the configuration for this backend type Options struct { Remote string `config:"remote"` ChunkSize fs.SizeSuffix `config:"chunk_size"` NameFormat string `config:"name_format"` StartFrom int `config:"start_from"` MetaFormat string `config:"meta_format"` HashType string `config:"hash_type"` FailHard bool `config:"fail_hard"` } // Fs represents a wrapped fs.Fs type Fs struct { name string root string base fs.Fs // remote wrapped by chunker overlay wrapper fs.Fs // wrapper is used by SetWrapper useMeta bool // false if metadata format is 'none' useMD5 bool // mutually exclusive with useSHA1 useSHA1 bool // mutually exclusive with useMD5 hashFallback bool // allows fallback from MD5 to SHA1 and vice versa hashAll bool // hash all files, mutually exclusive with hashFallback dataNameFmt string // name format of data chunks ctrlNameFmt string // name format of control chunks nameRegexp *regexp.Regexp // regular expression to match chunk names opt Options // copy of Options features *fs.Features // optional features dirSort bool // reserved for future, ignored } // configure must be called only from NewFs or by unit tests func (f *Fs) configure(nameFormat, metaFormat, hashType string) error { if err := f.setChunkNameFormat(nameFormat); err != nil { return errors.Wrapf(err, "invalid name format '%s'", nameFormat) } if err := f.setMetaFormat(metaFormat); err != nil { return err } if err := f.setHashType(hashType); err != nil { return err } return nil } func (f *Fs) setMetaFormat(metaFormat string) error { switch metaFormat { case "none": f.useMeta = false case "simplejson": f.useMeta = true default: return fmt.Errorf("unsupported meta format '%s'", metaFormat) } return nil } // setHashType // must be called *after* setMetaFormat. // // In the "All" mode chunker will force metadata on all files // if the wrapped remote can't provide given hashsum. func (f *Fs) setHashType(hashType string) error { f.useMD5 = false f.useSHA1 = false f.hashFallback = false f.hashAll = false requireMetaHash := true switch hashType { case "none": requireMetaHash = false case "md5": f.useMD5 = true case "sha1": f.useSHA1 = true case "md5quick": f.useMD5 = true f.hashFallback = true case "sha1quick": f.useSHA1 = true f.hashFallback = true case "md5all": f.useMD5 = true f.hashAll = !f.base.Hashes().Contains(hash.MD5) case "sha1all": f.useSHA1 = true f.hashAll = !f.base.Hashes().Contains(hash.SHA1) default: return fmt.Errorf("unsupported hash type '%s'", hashType) } if requireMetaHash && !f.useMeta { return fmt.Errorf("hash type '%s' requires compatible meta format", hashType) } return nil } // setChunkNameFormat converts pattern based chunk name format // into Printf format and Regular expressions for data and // control chunks. func (f *Fs) setChunkNameFormat(pattern string) error { // validate pattern if strings.Count(pattern, "*") != 1 { return errors.New("pattern must have exactly one asterisk (*)") } numDigits := strings.Count(pattern, "#") if numDigits < 1 { return errors.New("pattern must have a hash character (#)") } if strings.Index(pattern, "*") > strings.Index(pattern, "#") { return errors.New("asterisk (*) in pattern must come before hashes (#)") } if ok, _ := regexp.MatchString("^[^#]*[#]+[^#]*$", pattern); !ok { return errors.New("hashes (#) in pattern must be consecutive") } if dir, _ := path.Split(pattern); dir != "" { return errors.New("directory separator prohibited") } if pattern[0] != '*' { return errors.New("pattern must start with asterisk") // to be lifted later } // craft a unified regular expression for all types of chunks reHashes := regexp.MustCompile("[#]+") reDigits := "[0-9]+" if numDigits > 1 { reDigits = fmt.Sprintf("[0-9]{%d,}", numDigits) } reDataOrCtrl := fmt.Sprintf("(?:(%s)|_(%s))", reDigits, ctrlTypeRegStr) // this must be non-greedy or else it can eat up temporary suffix const mainNameRegStr = "(.+?)" strRegex := regexp.QuoteMeta(pattern) strRegex = reHashes.ReplaceAllLiteralString(strRegex, reDataOrCtrl) strRegex = strings.Replace(strRegex, "\\*", mainNameRegStr, -1) strRegex = fmt.Sprintf("^%s(?:%s)?$", strRegex, tempChunkRegStr) f.nameRegexp = regexp.MustCompile(strRegex) // craft printf formats for active data/control chunks fmtDigits := "%d" if numDigits > 1 { fmtDigits = fmt.Sprintf("%%0%dd", numDigits) } strFmt := strings.Replace(pattern, "%", "%%", -1) strFmt = strings.Replace(strFmt, "*", "%s", 1) f.dataNameFmt = reHashes.ReplaceAllLiteralString(strFmt, fmtDigits) f.ctrlNameFmt = reHashes.ReplaceAllLiteralString(strFmt, "_%s") return nil } // makeChunkName produces chunk name (or path) for given file. // // mainPath can be name, relative or absolute path of main file. // // chunkNo must be a zero based index of data chunk. // Negative chunkNo eg. -1 indicates a control chunk. // ctrlType is type of control chunk (must be valid). // ctrlType must be "" for data chunks. // // xactNo is a transaction number. // Negative xactNo eg. -1 indicates an active chunk, // otherwise produce temporary chunk name. // func (f *Fs) makeChunkName(mainPath string, chunkNo int, ctrlType string, xactNo int64) string { dir, mainName := path.Split(mainPath) var name string switch { case chunkNo >= 0 && ctrlType == "": name = fmt.Sprintf(f.dataNameFmt, mainName, chunkNo+f.opt.StartFrom) case chunkNo < 0 && ctrlTypeRegexp.MatchString(ctrlType): name = fmt.Sprintf(f.ctrlNameFmt, mainName, ctrlType) default: panic("makeChunkName: invalid argument") // must not produce something we can't consume } if xactNo >= 0 { name = fmt.Sprintf(tempChunkFormat, name, xactNo) } return dir + name } // parseChunkName checks whether given file path belongs to // a chunk and extracts chunk name parts. // // filePath can be name, relative or absolute path of a file. // // Returned mainPath is a non-empty string if valid chunk name // is detected or "" if it's not a chunk. // Other returned values depend on detected chunk type: // data or control, active or temporary: // // data chunk - the returned chunkNo is non-negative and ctrlType is "" // control chunk - the chunkNo is -1 and ctrlType is non-empty string // active chunk - the returned xactNo is -1 // temporary chunk - the xactNo is non-negative integer func (f *Fs) parseChunkName(filePath string) (mainPath string, chunkNo int, ctrlType string, xactNo int64) { dir, name := path.Split(filePath) match := f.nameRegexp.FindStringSubmatch(name) if match == nil || match[1] == "" { return "", -1, "", -1 } var err error chunkNo = -1 if match[2] != "" { if chunkNo, err = strconv.Atoi(match[2]); err != nil { chunkNo = -1 } if chunkNo -= f.opt.StartFrom; chunkNo < 0 { fs.Infof(f, "invalid data chunk number in file %q", name) return "", -1, "", -1 } } xactNo = -1 if match[4] != "" { if xactNo, err = strconv.ParseInt(match[4], 10, 64); err != nil || xactNo < 0 { fs.Infof(f, "invalid transaction number in file %q", name) return "", -1, "", -1 } } mainPath = dir + match[1] ctrlType = match[3] return } // forbidChunk prints error message or raises error if file is chunk. // First argument sets log prefix, use `false` to suppress message. func (f *Fs) forbidChunk(o interface{}, filePath string) error { if mainPath, _, _, _ := f.parseChunkName(filePath); mainPath != "" { if f.opt.FailHard { return fmt.Errorf("chunk overlap with %q", mainPath) } if boolVal, isBool := o.(bool); !isBool || boolVal { fs.Errorf(o, "chunk overlap with %q", mainPath) } } return nil } // List the objects and directories in dir into entries. // The entries can be returned in any order but should be // for a complete directory. // // dir should be "" to list the root, and should not have // trailing slashes. // // This should return ErrDirNotFound if the directory isn't found. // // Commands normally cleanup all temporary chunks in case of a failure. // However, if rclone dies unexpectedly, it can leave behind a bunch of // hidden temporary chunks. List and its underlying chunkEntries() // silently skip all temporary chunks in the directory. It's okay if // they belong to an unfinished command running in parallel. // // However, there is no way to discover dead temporary chunks atm. // As a workaround users can use `purge` to forcibly remove the whole // directory together with dead chunks. // In future a flag named like `--chunker-list-hidden` may be added to // rclone that will tell List to reveal hidden chunks. // func (f *Fs) List(ctx context.Context, dir string) (entries fs.DirEntries, err error) { entries, err = f.base.List(ctx, dir) if err != nil { return nil, err } return f.processEntries(ctx, entries, dir) } // ListR lists the objects and directories of the Fs starting // from dir recursively into out. // // dir should be "" to start from the root, and should not // have trailing slashes. // // This should return ErrDirNotFound if the directory isn't // found. // // It should call callback for each tranche of entries read. // These need not be returned in any particular order. If // callback returns an error then the listing will stop // immediately. // // Don't implement this unless you have a more efficient way // of listing recursively than doing a directory traversal. func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (err error) { do := f.base.Features().ListR return do(ctx, dir, func(entries fs.DirEntries) error { newEntries, err := f.processEntries(ctx, entries, dir) if err != nil { return err } return callback(newEntries) }) } // processEntries assembles chunk entries into composite entries func (f *Fs) processEntries(ctx context.Context, origEntries fs.DirEntries, dirPath string) (newEntries fs.DirEntries, err error) { // sort entries, so that meta objects (if any) appear before their chunks sortedEntries := origEntries if f.dirSort { sortedEntries := make(fs.DirEntries, len(origEntries)) copy(sortedEntries, origEntries) sort.Sort(sortedEntries) } byRemote := make(map[string]*Object) badEntry := make(map[string]bool) isSubdir := make(map[string]bool) var tempEntries fs.DirEntries for _, dirOrObject := range sortedEntries { switch entry := dirOrObject.(type) { case fs.Object: remote := entry.Remote() if mainRemote, chunkNo, ctrlType, xactNo := f.parseChunkName(remote); mainRemote != "" { if xactNo != -1 { if revealHidden { fs.Infof(f, "ignore temporary chunk %q", remote) } break } if ctrlType != "" { if revealHidden { fs.Infof(f, "ignore control chunk %q", remote) } break } mainObject := byRemote[mainRemote] if mainObject == nil && f.useMeta { fs.Debugf(f, "skip chunk %q without meta object", remote) break } if mainObject == nil { // useMeta is false - create chunked object without metadata mainObject = f.newObject(mainRemote, nil, nil) byRemote[mainRemote] = mainObject if !badEntry[mainRemote] { tempEntries = append(tempEntries, mainObject) } } if err := mainObject.addChunk(entry, chunkNo); err != nil { if f.opt.FailHard { return nil, err } badEntry[mainRemote] = true } break } object := f.newObject("", entry, nil) byRemote[remote] = object tempEntries = append(tempEntries, object) case fs.Directory: isSubdir[entry.Remote()] = true wrapDir := fs.NewDirCopy(ctx, entry) wrapDir.SetRemote(entry.Remote()) tempEntries = append(tempEntries, wrapDir) default: if f.opt.FailHard { return nil, fmt.Errorf("Unknown object type %T", entry) } fs.Debugf(f, "unknown object type %T", entry) } } for _, entry := range tempEntries { if object, ok := entry.(*Object); ok { remote := object.Remote() if isSubdir[remote] { if f.opt.FailHard { return nil, fmt.Errorf("%q is both meta object and directory", remote) } badEntry[remote] = true // fall thru } if badEntry[remote] { fs.Debugf(f, "invalid directory entry %q", remote) continue } if err := object.validate(); err != nil { if f.opt.FailHard { return nil, err } fs.Debugf(f, "invalid chunks in object %q", remote) continue } } newEntries = append(newEntries, entry) } if f.dirSort { sort.Sort(newEntries) } return newEntries, nil } // NewObject finds the Object at remote. // // Please note that every NewObject invocation will scan the whole directory. // Using here something like fs.DirCache might improve performance // (but will make logic more complex, though). // // Note that chunker prefers analyzing file names rather than reading // the content of meta object assuming that directory scans are fast // but opening even a small file can be slow on some backends. // func (f *Fs) NewObject(ctx context.Context, remote string) (fs.Object, error) { if err := f.forbidChunk(false, remote); err != nil { return nil, errors.Wrap(err, "can't access") } var ( o *Object baseObj fs.Object err error ) if f.useMeta { baseObj, err = f.base.NewObject(ctx, remote) if err != nil { return nil, err } remote = baseObj.Remote() // Chunker's meta object cannot be large and maxMetadataSize acts // as a hard limit. Anything larger than that is treated as a // non-chunked file without even checking its contents, so it's // paramount to prevent metadata from exceeding the maximum size. o = f.newObject("", baseObj, nil) if o.size > maxMetadataSize { return o, nil } } else { // Metadata is disabled, hence this is either a multi-chunk // composite file without meta object or a non-chunked file. // Create an empty wrapper here, scan directory to determine // which case it is and postpone reading if it's the latter one. o = f.newObject(remote, nil, nil) } // If the object is small, it's probably a meta object. // However, composite file must have data chunks besides it. // Scan directory for possible data chunks now and decide later on. dir := path.Dir(strings.TrimRight(remote, "/")) if dir == "." { dir = "" } entries, err := f.base.List(ctx, dir) switch err { case nil: // OK, fall thru case fs.ErrorDirNotFound: entries = nil default: return nil, errors.Wrap(err, "can't detect composite file") } for _, dirOrObject := range entries { entry, ok := dirOrObject.(fs.Object) if !ok { continue } entryRemote := entry.Remote() if !strings.Contains(entryRemote, remote) { continue // bypass regexp to save cpu } mainRemote, chunkNo, ctrlType, xactNo := f.parseChunkName(entryRemote) if mainRemote == "" || mainRemote != remote || ctrlType != "" || xactNo != -1 { continue // skip non-conforming, temporary and control chunks } //fs.Debugf(f, "%q belongs to %q as chunk %d", entryRemote, mainRemote, chunkNo) if err := o.addChunk(entry, chunkNo); err != nil { return nil, err } } if o.main == nil && (o.chunks == nil || len(o.chunks) == 0) { // Scanning hasn't found data chunks with conforming names. if f.useMeta { // Metadata is required but absent and there are no chunks. return nil, fs.ErrorObjectNotFound } // Data chunks are not found and metadata is disabled. // Thus, we are in the "latter case" from above. // Let's try the postponed reading of a non-chunked file and add it // as a single chunk to the empty composite wrapper created above // with nil metadata. baseObj, err = f.base.NewObject(ctx, remote) if err == nil { err = o.addChunk(baseObj, 0) } if err != nil { return nil, err } } // This is either a composite object with metadata or a non-chunked // file without metadata. Validate it and update the total data size. // As an optimization, skip metadata reading here - we will call // readMetadata lazily when needed. if err := o.validate(); err != nil { return nil, err } return o, nil } func (o *Object) readMetadata(ctx context.Context) error { if o.isFull { return nil } if !o.isComposite() || !o.f.useMeta { o.isFull = true return nil } // validate metadata metaObject := o.main reader, err := metaObject.Open(ctx) if err != nil { return err } metadata, err := ioutil.ReadAll(reader) if err != nil { return err } _ = reader.Close() // ensure file handle is freed on windows switch o.f.opt.MetaFormat { case "simplejson": metaInfo, err := unmarshalSimpleJSON(ctx, metaObject, metadata, true) if err != nil { return errors.Wrap(err, "invalid metadata") } if o.size != metaInfo.Size() || len(o.chunks) != metaInfo.nChunks { return errors.New("metadata doesn't match file size") } o.md5 = metaInfo.md5 o.sha1 = metaInfo.sha1 } o.isFull = true return nil } // put implements Put, PutStream, PutUnchecked, Update func (f *Fs) put(ctx context.Context, in io.Reader, src fs.ObjectInfo, remote string, options []fs.OpenOption, basePut putFn) (obj fs.Object, err error) { c := f.newChunkingReader(src) wrapIn := c.wrapStream(ctx, in, src) var metaObject fs.Object defer func() { if err != nil { c.rollback(ctx, metaObject) } }() // Use system timer as a trivial source of transaction numbers, // don't try hard to safeguard against chunk collisions between // parallel transactions. xactNo := time.Now().Unix() if xactNo < 0 { xactNo = -xactNo // unlikely but transaction number must be positive } baseRemote := remote // Transfer chunks data for c.chunkNo = 0; !c.done; c.chunkNo++ { if c.chunkNo > maxSafeChunkNumber { return nil, ErrChunkOverflow } tempRemote := f.makeChunkName(baseRemote, c.chunkNo, "", xactNo) size := c.sizeLeft if size > c.chunkSize { size = c.chunkSize } savedReadCount := c.readCount // If a single chunk is expected, avoid the extra rename operation chunkRemote := tempRemote if c.expectSingle && c.chunkNo == 0 && optimizeFirstChunk { chunkRemote = baseRemote } info := f.wrapInfo(src, chunkRemote, size) // TODO: handle range/limit options chunk, errChunk := basePut(ctx, wrapIn, info, options...) if errChunk != nil { return nil, errChunk } if size > 0 && c.readCount == savedReadCount && c.expectSingle { // basePut returned success but didn't call chunkingReader's Read. // This is possible if wrapped remote has performed the put by hash // (chunker bridges Hash from source for non-chunked files). // Hence, we account here for the actual number of bytes read. c.accountBytes(size) } if c.sizeLeft == 0 && !c.done { // The file has been apparently put by hash, force completion. c.done = true } // Expected a single chunk but more to come, so name it as usual. if !c.done && chunkRemote != tempRemote { fs.Infof(chunk, "Expected single chunk, got more") chunkMoved, errMove := f.baseMove(ctx, chunk, tempRemote, false) if errMove != nil { silentlyRemove(ctx, chunk) return nil, errMove } chunk = chunkMoved } // Wrapped remote may or may not have seen EOF from chunking reader, // eg. the box multi-uploader reads exactly the chunk size specified // and skips the "EOF" read. Hence, switch to next limit here. if !(c.chunkLimit == 0 || c.chunkLimit == c.chunkSize || c.sizeTotal == -1 || c.done) { silentlyRemove(ctx, chunk) return nil, fmt.Errorf("Destination ignored %d data bytes", c.chunkLimit) } c.chunkLimit = c.chunkSize c.chunks = append(c.chunks, chunk) } // Validate uploaded size if c.sizeTotal != -1 && c.readCount != c.sizeTotal { return nil, fmt.Errorf("Incorrect upload size %d != %d", c.readCount, c.sizeTotal) } // Check for input that looks like valid metadata needMeta := len(c.chunks) > 1 if c.readCount <= maxMetadataSize && len(c.chunks) == 1 { _, err := unmarshalSimpleJSON(ctx, c.chunks[0], c.smallHead, false) needMeta = err == nil } // Finalize small object as non-chunked. // This can be bypassed, and single chunk with metadata will be // created if forced by consistent hashing or due to unsafe input. if !needMeta && !f.hashAll && f.useMeta { // If previous object was chunked, remove its chunks f.removeOldChunks(ctx, baseRemote) // Rename single data chunk in place chunk := c.chunks[0] if chunk.Remote() != baseRemote { chunkMoved, errMove := f.baseMove(ctx, chunk, baseRemote, true) if errMove != nil { silentlyRemove(ctx, chunk) return nil, errMove } chunk = chunkMoved } return f.newObject("", chunk, nil), nil } // Validate total size of data chunks var sizeTotal int64 for _, chunk := range c.chunks { sizeTotal += chunk.Size() } if sizeTotal != c.readCount { return nil, fmt.Errorf("Incorrect chunks size %d != %d", sizeTotal, c.readCount) } // If previous object was chunked, remove its chunks f.removeOldChunks(ctx, baseRemote) // Rename data chunks from temporary to final names for chunkNo, chunk := range c.chunks { chunkRemote := f.makeChunkName(baseRemote, chunkNo, "", -1) chunkMoved, errMove := f.baseMove(ctx, chunk, chunkRemote, false) if errMove != nil { return nil, errMove } c.chunks[chunkNo] = chunkMoved } if !f.useMeta { // Remove stale metadata, if any oldMeta, errOldMeta := f.base.NewObject(ctx, baseRemote) if errOldMeta == nil { silentlyRemove(ctx, oldMeta) } o := f.newObject(baseRemote, nil, c.chunks) o.size = sizeTotal return o, nil } // Update meta object var metadata []byte switch f.opt.MetaFormat { case "simplejson": c.updateHashes() metadata, err = marshalSimpleJSON(ctx, sizeTotal, len(c.chunks), c.md5, c.sha1) } if err == nil { metaInfo := f.wrapInfo(src, baseRemote, int64(len(metadata))) metaObject, err = basePut(ctx, bytes.NewReader(metadata), metaInfo) } if err != nil { return nil, err } o := f.newObject("", metaObject, c.chunks) o.size = sizeTotal return o, nil } type putFn func(ctx context.Context, in io.Reader, src fs.ObjectInfo, options ...fs.OpenOption) (fs.Object, error) type chunkingReader struct { baseReader io.Reader sizeTotal int64 sizeLeft int64 readCount int64 chunkSize int64 chunkLimit int64 chunkNo int err error done bool chunks []fs.Object expectSingle bool smallHead []byte fs *Fs hasher gohash.Hash md5 string sha1 string } func (f *Fs) newChunkingReader(src fs.ObjectInfo) *chunkingReader { c := &chunkingReader{ fs: f, chunkSize: int64(f.opt.ChunkSize), sizeTotal: src.Size(), } c.chunkLimit = c.chunkSize c.sizeLeft = c.sizeTotal c.expectSingle = c.sizeTotal >= 0 && c.sizeTotal <= c.chunkSize return c } func (c *chunkingReader) wrapStream(ctx context.Context, in io.Reader, src fs.ObjectInfo) io.Reader { baseIn, wrapBack := accounting.UnWrap(in) switch { case c.fs.useMD5: if c.md5, _ = src.Hash(ctx, hash.MD5); c.md5 == "" { if c.fs.hashFallback { c.sha1, _ = src.Hash(ctx, hash.SHA1) } else { c.hasher = md5.New() } } case c.fs.useSHA1: if c.sha1, _ = src.Hash(ctx, hash.SHA1); c.sha1 == "" { if c.fs.hashFallback { c.md5, _ = src.Hash(ctx, hash.MD5) } else { c.hasher = sha1.New() } } } if c.hasher != nil { baseIn = io.TeeReader(baseIn, c.hasher) } c.baseReader = baseIn return wrapBack(c) } func (c *chunkingReader) updateHashes() { if c.hasher == nil { return } switch { case c.fs.useMD5: c.md5 = hex.EncodeToString(c.hasher.Sum(nil)) case c.fs.useSHA1: c.sha1 = hex.EncodeToString(c.hasher.Sum(nil)) } } // Note: Read is not called if wrapped remote performs put by hash. func (c *chunkingReader) Read(buf []byte) (bytesRead int, err error) { if c.chunkLimit <= 0 { // Chunk complete - switch to next one. // We might not get here because some remotes (eg. box multi-uploader) // read the specified size exactly and skip the concluding EOF Read. // Then a check in the put loop will kick in. c.chunkLimit = c.chunkSize return 0, io.EOF } if int64(len(buf)) > c.chunkLimit { buf = buf[0:c.chunkLimit] } bytesRead, err = c.baseReader.Read(buf) if err != nil && err != io.EOF { c.err = err c.done = true return } c.accountBytes(int64(bytesRead)) if c.chunkNo == 0 && c.expectSingle && bytesRead > 0 && c.readCount <= maxMetadataSize { c.smallHead = append(c.smallHead, buf[:bytesRead]...) } if bytesRead == 0 && c.sizeLeft == 0 { err = io.EOF // Force EOF when no data left. } if err == io.EOF { c.done = true } return } func (c *chunkingReader) accountBytes(bytesRead int64) { c.readCount += bytesRead c.chunkLimit -= bytesRead if c.sizeLeft != -1 { c.sizeLeft -= bytesRead } } // rollback removes uploaded temporary chunks func (c *chunkingReader) rollback(ctx context.Context, metaObject fs.Object) { if metaObject != nil { c.chunks = append(c.chunks, metaObject) } for _, chunk := range c.chunks { if err := chunk.Remove(ctx); err != nil { fs.Errorf(chunk, "Failed to remove temporary chunk: %v", err) } } } func (f *Fs) removeOldChunks(ctx context.Context, remote string) { oldFsObject, err := f.NewObject(ctx, remote) if err == nil { oldObject := oldFsObject.(*Object) for _, chunk := range oldObject.chunks { if err := chunk.Remove(ctx); err != nil { fs.Errorf(chunk, "Failed to remove old chunk: %v", err) } } } } // Put into the remote path with the given modTime and size. // // May create the object even if it returns an error - if so // will return the object and the error, otherwise will return // nil and the error func (f *Fs) Put(ctx context.Context, in io.Reader, src fs.ObjectInfo, options ...fs.OpenOption) (fs.Object, error) { if err := f.forbidChunk(src, src.Remote()); err != nil { return nil, errors.Wrap(err, "refusing to put") } return f.put(ctx, in, src, src.Remote(), options, f.base.Put) } // PutStream uploads to the remote path with the modTime given of indeterminate size func (f *Fs) PutStream(ctx context.Context, in io.Reader, src fs.ObjectInfo, options ...fs.OpenOption) (fs.Object, error) { if err := f.forbidChunk(src, src.Remote()); err != nil { return nil, errors.Wrap(err, "refusing to upload") } return f.put(ctx, in, src, src.Remote(), options, f.base.Features().PutStream) } // Update in to the object with the modTime given of the given size func (o *Object) Update(ctx context.Context, in io.Reader, src fs.ObjectInfo, options ...fs.OpenOption) error { if err := o.f.forbidChunk(o, o.Remote()); err != nil { return errors.Wrap(err, "update refused") } if err := o.readMetadata(ctx); err != nil { // refuse to update a file of unsupported format return errors.Wrap(err, "refusing to update") } basePut := o.f.base.Put if src.Size() < 0 { basePut = o.f.base.Features().PutStream if basePut == nil { return errors.New("wrapped file system does not support streaming uploads") } } oNew, err := o.f.put(ctx, in, src, o.Remote(), options, basePut) if err == nil { *o = *oNew.(*Object) } return err } // PutUnchecked uploads the object // // This will create a duplicate if we upload a new file without // checking to see if there is one already - use Put() for that. func (f *Fs) PutUnchecked(ctx context.Context, in io.Reader, src fs.ObjectInfo, options ...fs.OpenOption) (fs.Object, error) { do := f.base.Features().PutUnchecked if do == nil { return nil, errors.New("can't PutUnchecked") } // TODO: handle range/limit options and really chunk stream here! o, err := do(ctx, in, f.wrapInfo(src, "", -1)) if err != nil { return nil, err } return f.newObject("", o, nil), nil } // Precision returns the precision of this Fs func (f *Fs) Precision() time.Duration { return f.base.Precision() } // Hashes returns the supported hash sets. // Chunker advertises a hash type if and only if it can be calculated // for files of any size, non-chunked or composite. func (f *Fs) Hashes() hash.Set { // composites AND no fallback AND (chunker OR wrapped Fs will hash all non-chunked's) if f.useMD5 && !f.hashFallback && (f.hashAll || f.base.Hashes().Contains(hash.MD5)) { return hash.NewHashSet(hash.MD5) } if f.useSHA1 && !f.hashFallback && (f.hashAll || f.base.Hashes().Contains(hash.SHA1)) { return hash.NewHashSet(hash.SHA1) } return hash.NewHashSet() // can't provide strong guarantees } // Mkdir makes the directory (container, bucket) // // Shouldn't return an error if it already exists func (f *Fs) Mkdir(ctx context.Context, dir string) error { if err := f.forbidChunk(dir, dir); err != nil { return errors.Wrap(err, "can't mkdir") } return f.base.Mkdir(ctx, dir) } // Rmdir removes the directory (container, bucket) if empty // // Return an error if it doesn't exist or isn't empty func (f *Fs) Rmdir(ctx context.Context, dir string) error { return f.base.Rmdir(ctx, dir) } // Purge all files in the root and the root directory // // Implement this if you have a way of deleting all the files // quicker than just running Remove() on the result of List() // // Return an error if it doesn't exist. // // This command will chain to `purge` from wrapped remote. // As a result it removes not only composite chunker files with their // active chunks but also all hidden temporary chunks in the directory. // func (f *Fs) Purge(ctx context.Context) error { do := f.base.Features().Purge if do == nil { return fs.ErrorCantPurge } return do(ctx) } // Remove an object (chunks and metadata, if any) // // Remove deletes only active chunks of the composite object. // It does not try to look for temporary chunks because they could belong // to another command modifying this composite file in parallel. // // Commands normally cleanup all temporary chunks in case of a failure. // However, if rclone dies unexpectedly, it can leave hidden temporary // chunks, which cannot be discovered using the `list` command. // Remove does not try to search for such chunks or to delete them. // Sometimes this can lead to strange results eg. when `list` shows that // directory is empty but `rmdir` refuses to remove it because on the // level of wrapped remote it's actually *not* empty. // As a workaround users can use `purge` to forcibly remove it. // // In future, a flag `--chunker-delete-hidden` may be added which tells // Remove to search directory for hidden chunks and remove them too // (at the risk of breaking parallel commands). // // Remove is the only operation allowed on the composite files with // invalid or future metadata format. // We don't let user copy/move/update unsupported composite files. // Let's at least let her get rid of them, just complain loudly. // // This can litter directory with orphan chunks of unsupported types, // but as long as we remove meta object, even future releases will // treat the composite file as removed and refuse to act upon it. // // Disclaimer: corruption can still happen if unsupported file is removed // and then recreated with the same name. // Unsupported control chunks will get re-picked by a more recent // rclone version with unexpected results. This can be helped by // the `delete hidden` flag above or at least the user has been warned. // func (o *Object) Remove(ctx context.Context) (err error) { if err := o.f.forbidChunk(o, o.Remote()); err != nil { // operations.Move can still call Remove if chunker's Move refuses // to corrupt file in hard mode. Hence, refuse to Remove, too. return errors.Wrap(err, "refuse to corrupt") } if err := o.readMetadata(ctx); err != nil { // Proceed but warn user that unexpected things can happen. fs.Errorf(o, "Removing a file with unsupported metadata: %v", err) } // Remove non-chunked file or meta object of a composite file. if o.main != nil { err = o.main.Remove(ctx) } // Remove only active data chunks, ignore any temporary chunks that // might probably be created in parallel by other transactions. for _, chunk := range o.chunks { chunkErr := chunk.Remove(ctx) if err == nil { err = chunkErr } } // There are no known control chunks to remove atm. return err } // copyOrMove implements copy or move func (f *Fs) copyOrMove(ctx context.Context, o *Object, remote string, do copyMoveFn, md5, sha1, opName string) (fs.Object, error) { if err := f.forbidChunk(o, remote); err != nil { return nil, errors.Wrapf(err, "can't %s", opName) } if !o.isComposite() { fs.Debugf(o, "%s non-chunked object...", opName) oResult, err := do(ctx, o.mainChunk(), remote) // chain operation to a single wrapped chunk if err != nil { return nil, err } return f.newObject("", oResult, nil), nil } if err := o.readMetadata(ctx); err != nil { // Refuse to copy/move composite files with invalid or future // metadata format which might involve unsupported chunk types. return nil, errors.Wrapf(err, "can't %s this file", opName) } fs.Debugf(o, "%s %d data chunks...", opName, len(o.chunks)) mainRemote := o.remote var newChunks []fs.Object var err error // Copy/move active data chunks. // Ignore possible temporary chunks being created by parallel operations. for _, chunk := range o.chunks { chunkRemote := chunk.Remote() if !strings.HasPrefix(chunkRemote, mainRemote) { err = fmt.Errorf("invalid chunk name %q", chunkRemote) break } chunkSuffix := chunkRemote[len(mainRemote):] chunkResult, err := do(ctx, chunk, remote+chunkSuffix) if err != nil { break } newChunks = append(newChunks, chunkResult) } // Copy or move old metadata. // There are no known control chunks to move/copy atm. var metaObject fs.Object if err == nil && o.main != nil { metaObject, err = do(ctx, o.main, remote) } if err != nil { for _, chunk := range newChunks { silentlyRemove(ctx, chunk) } return nil, err } // Create wrapping object, calculate and validate total size newObj := f.newObject(remote, metaObject, newChunks) err = newObj.validate() if err != nil { silentlyRemove(ctx, newObj) return nil, err } // Update metadata var metadata []byte switch f.opt.MetaFormat { case "simplejson": metadata, err = marshalSimpleJSON(ctx, newObj.size, len(newChunks), md5, sha1) if err == nil { metaInfo := f.wrapInfo(metaObject, "", int64(len(metadata))) err = newObj.main.Update(ctx, bytes.NewReader(metadata), metaInfo) } case "none": if newObj.main != nil { err = newObj.main.Remove(ctx) } } // Return the composite object if err != nil { silentlyRemove(ctx, newObj) return nil, err } return newObj, nil } type copyMoveFn func(context.Context, fs.Object, string) (fs.Object, error) func (f *Fs) okForServerSide(ctx context.Context, src fs.Object, opName string) (obj *Object, md5, sha1 string, ok bool) { var diff string obj, ok = src.(*Object) switch { case !ok: diff = "remote types" case !operations.SameConfig(f.base, obj.f.base): diff = "wrapped remotes" case f.opt.ChunkSize != obj.f.opt.ChunkSize: diff = "chunk sizes" case f.opt.NameFormat != obj.f.opt.NameFormat: diff = "chunk name formats" case f.opt.MetaFormat != obj.f.opt.MetaFormat: diff = "meta formats" } if diff != "" { fs.Debugf(src, "Can't %s - different %s", opName, diff) ok = false return } if f.opt.MetaFormat != "simplejson" || !obj.isComposite() { ok = true // hash is not required for metadata return } switch { case f.useMD5: md5, _ = obj.Hash(ctx, hash.MD5) ok = md5 != "" if !ok && f.hashFallback { sha1, _ = obj.Hash(ctx, hash.SHA1) ok = sha1 != "" } case f.useSHA1: sha1, _ = obj.Hash(ctx, hash.SHA1) ok = sha1 != "" if !ok && f.hashFallback { md5, _ = obj.Hash(ctx, hash.MD5) ok = md5 != "" } default: ok = false } if !ok { fs.Debugf(src, "Can't %s - required hash not found", opName) } return } // Copy src to this remote using server side copy operations. // // This is stored with the remote path given // // It returns the destination Object and a possible error // // Will only be called if src.Fs().Name() == f.Name() // // If it isn't possible then return fs.ErrorCantCopy func (f *Fs) Copy(ctx context.Context, src fs.Object, remote string) (fs.Object, error) { baseCopy := f.base.Features().Copy if baseCopy == nil { return nil, fs.ErrorCantCopy } obj, md5, sha1, ok := f.okForServerSide(ctx, src, "copy") if !ok { return nil, fs.ErrorCantCopy } return f.copyOrMove(ctx, obj, remote, baseCopy, md5, sha1, "copy") } // Move src to this remote using server side move operations. // // This is stored with the remote path given // // It returns the destination Object and a possible error // // Will only be called if src.Fs().Name() == f.Name() // // If it isn't possible then return fs.ErrorCantMove func (f *Fs) Move(ctx context.Context, src fs.Object, remote string) (fs.Object, error) { baseMove := func(ctx context.Context, src fs.Object, remote string) (fs.Object, error) { return f.baseMove(ctx, src, remote, false) } obj, md5, sha1, ok := f.okForServerSide(ctx, src, "move") if !ok { return nil, fs.ErrorCantMove } return f.copyOrMove(ctx, obj, remote, baseMove, md5, sha1, "move") } // baseMove chains to the wrapped Move or simulates it by Copy+Delete func (f *Fs) baseMove(ctx context.Context, src fs.Object, remote string, deleteDest bool) (fs.Object, error) { var dest fs.Object if deleteDest { var err error dest, err = f.base.NewObject(ctx, remote) if err != nil { dest = nil } } return operations.Move(ctx, f.base, dest, remote, src) } // DirMove moves src, srcRemote to this remote at dstRemote // using server side move operations. // // Will only be called if src.Fs().Name() == f.Name() // // If it isn't possible then return fs.ErrorCantDirMove // // If destination exists then return fs.ErrorDirExists func (f *Fs) DirMove(ctx context.Context, src fs.Fs, srcRemote, dstRemote string) error { do := f.base.Features().DirMove if do == nil { return fs.ErrorCantDirMove } srcFs, ok := src.(*Fs) if !ok { fs.Debugf(srcFs, "Can't move directory - not same remote type") return fs.ErrorCantDirMove } return do(ctx, srcFs.base, srcRemote, dstRemote) } // CleanUp the trash in the Fs // // Implement this if you have a way of emptying the trash or // otherwise cleaning up old versions of files. func (f *Fs) CleanUp(ctx context.Context) error { do := f.base.Features().CleanUp if do == nil { return errors.New("can't CleanUp") } return do(ctx) } // About gets quota information from the Fs func (f *Fs) About(ctx context.Context) (*fs.Usage, error) { do := f.base.Features().About if do == nil { return nil, errors.New("About not supported") } return do(ctx) } // UnWrap returns the Fs that this Fs is wrapping func (f *Fs) UnWrap() fs.Fs { return f.base } // WrapFs returns the Fs that is wrapping this Fs func (f *Fs) WrapFs() fs.Fs { return f.wrapper } // SetWrapper sets the Fs that is wrapping this Fs func (f *Fs) SetWrapper(wrapper fs.Fs) { f.wrapper = wrapper } // ChangeNotify calls the passed function with a path // that has had changes. If the implementation // uses polling, it should adhere to the given interval. // // Replace data chunk names by the name of composite file. // Ignore temporary and control chunks. func (f *Fs) ChangeNotify(ctx context.Context, notifyFunc func(string, fs.EntryType), pollIntervalChan <-chan time.Duration) { do := f.base.Features().ChangeNotify if do == nil { return } wrappedNotifyFunc := func(path string, entryType fs.EntryType) { //fs.Debugf(f, "ChangeNotify: path %q entryType %d", path, entryType) if entryType == fs.EntryObject { mainPath, _, _, xactNo := f.parseChunkName(path) if mainPath != "" && xactNo == -1 { path = mainPath } } notifyFunc(path, entryType) } do(ctx, wrappedNotifyFunc, pollIntervalChan) } // Object represents a composite file wrapping one or more data chunks type Object struct { remote string main fs.Object // meta object if file is composite, or wrapped non-chunked file, nil if meta format is 'none' chunks []fs.Object // active data chunks if file is composite, or wrapped file as a single chunk if meta format is 'none' size int64 // cached total size of chunks in a composite file or -1 for non-chunked files isFull bool // true if metadata has been read md5 string sha1 string f *Fs } func (o *Object) addChunk(chunk fs.Object, chunkNo int) error { if chunkNo < 0 { return fmt.Errorf("invalid chunk number %d", chunkNo+o.f.opt.StartFrom) } if chunkNo == len(o.chunks) { o.chunks = append(o.chunks, chunk) return nil } if chunkNo > maxSafeChunkNumber { return ErrChunkOverflow } if chunkNo > len(o.chunks) { newChunks := make([]fs.Object, (chunkNo + 1), (chunkNo+1)*2) copy(newChunks, o.chunks) o.chunks = newChunks } o.chunks[chunkNo] = chunk return nil } // validate verifies the object internals and updates total size func (o *Object) validate() error { if !o.isComposite() { _ = o.mainChunk() // verify that single wrapped chunk exists return nil } metaObject := o.main // this file is composite - o.main refers to meta object (or nil if meta format is 'none') if metaObject != nil && metaObject.Size() > maxMetadataSize { // metadata of a chunked file must be a tiny piece of json o.size = -1 return fmt.Errorf("%q metadata is too large", o.remote) } var totalSize int64 for _, chunk := range o.chunks { if chunk == nil { o.size = -1 return fmt.Errorf("%q has missing chunks", o) } totalSize += chunk.Size() } o.size = totalSize // cache up the total data size return nil } func (f *Fs) newObject(remote string, main fs.Object, chunks []fs.Object) *Object { var size int64 = -1 if main != nil { size = main.Size() if remote == "" { remote = main.Remote() } } return &Object{ remote: remote, main: main, size: size, f: f, chunks: chunks, } } // mainChunk returns: // - a wrapped object for non-chunked files // - meta object for chunked files with metadata // - first chunk for chunked files without metadata // Never returns nil. func (o *Object) mainChunk() fs.Object { if o.main != nil { return o.main // meta object or non-chunked wrapped file } if o.chunks != nil { return o.chunks[0] // first chunk of a chunked composite file } panic("invalid chunked object") // very unlikely } func (o *Object) isComposite() bool { return o.chunks != nil } // Fs returns read only access to the Fs that this object is part of func (o *Object) Fs() fs.Info { return o.f } // Return a string version func (o *Object) String() string { if o == nil { return "" } return o.remote } // Remote returns the remote path func (o *Object) Remote() string { return o.remote } // Size returns the size of the file func (o *Object) Size() int64 { if o.isComposite() { return o.size // total size of data chunks in a composite file } return o.mainChunk().Size() // size of wrapped non-chunked file } // Storable returns whether object is storable func (o *Object) Storable() bool { return o.mainChunk().Storable() } // ModTime returns the modification time of the file func (o *Object) ModTime(ctx context.Context) time.Time { return o.mainChunk().ModTime(ctx) } // SetModTime sets the modification time of the file func (o *Object) SetModTime(ctx context.Context, mtime time.Time) error { if err := o.readMetadata(ctx); err != nil { return err // refuse to act on unsupported format } return o.mainChunk().SetModTime(ctx, mtime) } // Hash returns the selected checksum of the file. // If no checksum is available it returns "". // If a particular hashsum type is not supported, chunker won't fail // with `unsupported` error but return the empty hash string. // // Currently metadata (if not configured as 'none') is kept only for // composite files, but for non-chunked small files chunker obtains // hashsums from wrapped remote. // In the "All" mode chunker will force metadata on all files if // particular hashsum type is unsupported by wrapped remote. // func (o *Object) Hash(ctx context.Context, hashType hash.Type) (string, error) { if !o.isComposite() { // First, chain to the single wrapped chunk, if possible. if value, err := o.mainChunk().Hash(ctx, hashType); err == nil && value != "" { return value, nil } } if err := o.readMetadata(ctx); err != nil { return "", err // valid metadata is required to get hash, abort } // Try hash from metadata if the file is composite or if wrapped remote fails. switch hashType { case hash.MD5: if o.md5 == "" { return "", nil } return o.md5, nil case hash.SHA1: if o.sha1 == "" { return "", nil } return o.sha1, nil default: return "", hash.ErrUnsupported } } // UnWrap returns the wrapped Object func (o *Object) UnWrap() fs.Object { return o.mainChunk() } // Open opens the file for read. Call Close() on the returned io.ReadCloser func (o *Object) Open(ctx context.Context, options ...fs.OpenOption) (rc io.ReadCloser, err error) { if !o.isComposite() { return o.mainChunk().Open(ctx, options...) // chain to wrapped non-chunked file } if err := o.readMetadata(ctx); err != nil { // refuse to open unsupported format return nil, errors.Wrap(err, "can't open") } var openOptions []fs.OpenOption var offset, limit int64 = 0, -1 for _, option := range options { switch opt := option.(type) { case *fs.SeekOption: offset = opt.Offset case *fs.RangeOption: offset, limit = opt.Decode(o.size) default: // pass Options on to the wrapped open, if appropriate openOptions = append(openOptions, option) } } if offset < 0 { return nil, errors.New("invalid offset") } if limit < 0 { limit = o.size - offset } return o.newLinearReader(ctx, offset, limit, openOptions) } // linearReader opens and reads file chunks sequentially, without read-ahead type linearReader struct { ctx context.Context chunks []fs.Object options []fs.OpenOption limit int64 count int64 pos int reader io.ReadCloser err error } func (o *Object) newLinearReader(ctx context.Context, offset, limit int64, options []fs.OpenOption) (io.ReadCloser, error) { r := &linearReader{ ctx: ctx, chunks: o.chunks, options: options, limit: limit, } // skip to chunk for given offset err := io.EOF for offset >= 0 && err != nil { offset, err = r.nextChunk(offset) } if err == nil || err == io.EOF { r.err = err return r, nil } return nil, err } func (r *linearReader) nextChunk(offset int64) (int64, error) { if r.err != nil { return -1, r.err } if r.pos >= len(r.chunks) || r.limit <= 0 || offset < 0 { return -1, io.EOF } chunk := r.chunks[r.pos] count := chunk.Size() r.pos++ if offset >= count { return offset - count, io.EOF } count -= offset if r.limit < count { count = r.limit } options := append(r.options, &fs.RangeOption{Start: offset, End: offset + count - 1}) if err := r.Close(); err != nil { return -1, err } reader, err := chunk.Open(r.ctx, options...) if err != nil { return -1, err } r.reader = reader r.count = count return offset, nil } func (r *linearReader) Read(p []byte) (n int, err error) { if r.err != nil { return 0, r.err } if r.limit <= 0 { r.err = io.EOF return 0, io.EOF } for r.count <= 0 { // current chunk has been read completely or its size is zero off, err := r.nextChunk(0) if off < 0 { r.err = err return 0, err } } n, err = r.reader.Read(p) if err == nil || err == io.EOF { r.count -= int64(n) r.limit -= int64(n) if r.limit > 0 { err = nil // more data to read } } r.err = err return } func (r *linearReader) Close() (err error) { if r.reader != nil { err = r.reader.Close() r.reader = nil } return } // ObjectInfo describes a wrapped fs.ObjectInfo for being the source type ObjectInfo struct { src fs.ObjectInfo fs *Fs nChunks int // number of data chunks size int64 // overrides source size by the total size of data chunks remote string // overrides remote name md5 string // overrides MD5 checksum sha1 string // overrides SHA1 checksum } func (f *Fs) wrapInfo(src fs.ObjectInfo, newRemote string, totalSize int64) *ObjectInfo { return &ObjectInfo{ src: src, fs: f, size: totalSize, remote: newRemote, } } // Fs returns read only access to the Fs that this object is part of func (oi *ObjectInfo) Fs() fs.Info { if oi.fs == nil { panic("stub ObjectInfo") } return oi.fs } // String returns string representation func (oi *ObjectInfo) String() string { return oi.src.String() } // Storable returns whether object is storable func (oi *ObjectInfo) Storable() bool { return oi.src.Storable() } // Remote returns the remote path func (oi *ObjectInfo) Remote() string { if oi.remote != "" { return oi.remote } return oi.src.Remote() } // Size returns the size of the file func (oi *ObjectInfo) Size() int64 { if oi.size != -1 { return oi.size } return oi.src.Size() } // ModTime returns the modification time func (oi *ObjectInfo) ModTime(ctx context.Context) time.Time { return oi.src.ModTime(ctx) } // Hash returns the selected checksum of the file // If no checksum is available it returns "" // // Hash prefers wrapped hashsum for a non-chunked file, then tries to // read it from metadata. This in theory handles an unusual case when // a small file has been modified on the level of wrapped remote, // but chunker isn't aware of that. // func (oi *ObjectInfo) Hash(ctx context.Context, hashType hash.Type) (string, error) { var errUnsupported error switch hashType { case hash.MD5: if oi.md5 != "" { return oi.md5, nil } case hash.SHA1: if oi.sha1 != "" { return oi.sha1, nil } default: errUnsupported = hash.ErrUnsupported } if oi.Size() != oi.src.Size() { // fail if this info wraps only a part of the file return "", errUnsupported } // chain to full source if possible value, err := oi.src.Hash(ctx, hashType) if err == hash.ErrUnsupported { return "", errUnsupported } return value, err } // ID returns the ID of the Object if known, or "" if not func (o *Object) ID() string { if doer, ok := o.mainChunk().(fs.IDer); ok { return doer.ID() } return "" } // Meta format `simplejson` type metaSimpleJSON struct { // required core fields Version *int `json:"ver"` Size *int64 `json:"size"` // total size of data chunks ChunkNum *int `json:"nchunks"` // number of data chunks // optional extra fields MD5 string `json:"md5,omitempty"` SHA1 string `json:"sha1,omitempty"` } // marshalSimpleJSON // // Current implementation creates metadata in three cases: // - for files larger than chunk size // - if file contents can be mistaken as meta object // - if consistent hashing is on but wrapped remote can't provide given hash // func marshalSimpleJSON(ctx context.Context, size int64, nChunks int, md5, sha1 string) ([]byte, error) { version := metadataVersion metadata := metaSimpleJSON{ // required core fields Version: &version, Size: &size, ChunkNum: &nChunks, // optional extra fields MD5: md5, SHA1: sha1, } data, err := json.Marshal(&metadata) if err == nil && data != nil && len(data) >= maxMetadataSize { // be a nitpicker, never produce something you can't consume return nil, errors.New("metadata can't be this big, please report to rclone developers") } return data, err } // unmarshalSimpleJSON // // Only metadata format version 1 is supported atm. // Future releases will transparently migrate older metadata objects. // New format will have a higher version number and cannot be correctly // handled by current implementation. // The version check below will then explicitly ask user to upgrade rclone. // func unmarshalSimpleJSON(ctx context.Context, metaObject fs.Object, data []byte, strictChecks bool) (info *ObjectInfo, err error) { // Be strict about JSON format // to reduce possibility that a random small file resembles metadata. if data != nil && len(data) > maxMetadataSize { return nil, errors.New("too big") } if data == nil || len(data) < 2 || data[0] != '{' || data[len(data)-1] != '}' { return nil, errors.New("invalid json") } var metadata metaSimpleJSON err = json.Unmarshal(data, &metadata) if err != nil { return nil, err } // Basic fields are strictly required // to reduce possibility that a random small file resembles metadata. if metadata.Version == nil || metadata.Size == nil || metadata.ChunkNum == nil { return nil, errors.New("missing required field") } // Perform strict checks, avoid corruption of future metadata formats. if *metadata.Version < 1 { return nil, errors.New("wrong version") } if *metadata.Size < 0 { return nil, errors.New("negative file size") } if *metadata.ChunkNum < 0 { return nil, errors.New("negative number of chunks") } if *metadata.ChunkNum > maxSafeChunkNumber { return nil, ErrChunkOverflow } if metadata.MD5 != "" { _, err = hex.DecodeString(metadata.MD5) if len(metadata.MD5) != 32 || err != nil { return nil, errors.New("wrong md5 hash") } } if metadata.SHA1 != "" { _, err = hex.DecodeString(metadata.SHA1) if len(metadata.SHA1) != 40 || err != nil { return nil, errors.New("wrong sha1 hash") } } // ChunkNum is allowed to be 0 in future versions if *metadata.ChunkNum < 1 && *metadata.Version <= metadataVersion { return nil, errors.New("wrong number of chunks") } // Non-strict mode also accepts future metadata versions if *metadata.Version > metadataVersion && strictChecks { return nil, fmt.Errorf("version %d is not supported, please upgrade rclone", metadata.Version) } var nilFs *Fs // nil object triggers appropriate type method info = nilFs.wrapInfo(metaObject, "", *metadata.Size) info.nChunks = *metadata.ChunkNum info.md5 = metadata.MD5 info.sha1 = metadata.SHA1 return info, nil } func silentlyRemove(ctx context.Context, o fs.Object) { _ = o.Remove(ctx) // ignore error } // Name of the remote (as passed into NewFs) func (f *Fs) Name() string { return f.name } // Root of the remote (as passed into NewFs) func (f *Fs) Root() string { return f.root } // Features returns the optional features of this Fs func (f *Fs) Features() *fs.Features { return f.features } // String returns a description of the FS func (f *Fs) String() string { return fmt.Sprintf("Chunked '%s:%s'", f.name, f.root) } // Check the interfaces are satisfied var ( _ fs.Fs = (*Fs)(nil) _ fs.Purger = (*Fs)(nil) _ fs.Copier = (*Fs)(nil) _ fs.Mover = (*Fs)(nil) _ fs.DirMover = (*Fs)(nil) _ fs.PutUncheckeder = (*Fs)(nil) _ fs.PutStreamer = (*Fs)(nil) _ fs.CleanUpper = (*Fs)(nil) _ fs.UnWrapper = (*Fs)(nil) _ fs.ListRer = (*Fs)(nil) _ fs.Abouter = (*Fs)(nil) _ fs.Wrapper = (*Fs)(nil) _ fs.ChangeNotifier = (*Fs)(nil) _ fs.ObjectInfo = (*ObjectInfo)(nil) _ fs.Object = (*Object)(nil) _ fs.ObjectUnWrapper = (*Object)(nil) _ fs.IDer = (*Object)(nil) )