rclone/cmd/bisync/compare.go
nielash b4216648e4 bisync: full support for comparing checksum, size, modtime - fixes #5679 fixes #5683 fixes #5684 fixes #5675
Before this change, bisync could only detect changes based on modtime, and
would refuse to run if either path lacked modtime support. This made bisync
unavailable for many of rclone's backends. Additionally, bisync did not account
for the Fs's precision when comparing modtimes, meaning that they could only be
reliably compared within the same side -- not against the opposite side. Size
and checksum (even when available) were ignored completely for deltas.

After this change, bisync now fully supports comparing based on any combination
of size, modtime, and checksum, lifting the prior restriction on backends
without modtime support. The comparison logic considers the backend's
precision, hash types, and other features as appropriate.

The comparison features optionally use a new --compare flag (which takes any
combination of size,modtime,checksum) and even supports some combinations not
otherwise supported in `sync` (like comparing all three at the same time.) By
default (without the --compare flag), bisync inherits the same comparison
options as `sync` (that is: size and modtime by default, unless modified with
flags such as --checksum or --size-only.) If the --compare flag is set, it will
override these defaults.

If --compare includes checksum and both remotes support checksums but have no
hash types in common with each other, checksums will be considered only for
comparisons within the same side (to determine what has changed since the prior
sync), but not for comparisons against the opposite side. If one side supports
checksums and the other does not, checksums will only be considered on the side
that supports them. When comparing with checksum and/or size without modtime,
bisync cannot determine whether a file is newer or older -- only whether it is
changed or unchanged. (If it is changed on both sides, bisync still does the
standard equality-check to avoid declaring a sync conflict unless it absolutely
has to.)

Also included are some new flags to customize the checksum comparison behavior
on backends where hashes are slow or unavailable. --no-slow-hash and
--slow-hash-sync-only allow selectively ignoring checksums on backends such as
local where they are slow. --download-hash allows computing them by downloading
when (and only when) they're otherwise not available. Of course, this option
probably won't be practical with large files, but may be a good option for
syncing small-but-important files with maximum accuracy (for example, a source
code repo on a crypt remote.) An additional advantage over methods like
cryptcheck is that the original file is not required for comparison (for
example, --download-hash can be used to bisync two different crypt remotes with
different passwords.)

Additionally, all of the above are now considered during the final --check-sync
for much-improved accuracy (before this change, it only compared filenames!)

Many other details are explained in the included docs.
2024-01-20 16:08:06 -05:00

309 lines
11 KiB
Go

package bisync
import (
"context"
"errors"
"fmt"
"strings"
mutex "sync"
"time"
"github.com/rclone/rclone/fs"
"github.com/rclone/rclone/fs/accounting"
"github.com/rclone/rclone/fs/hash"
"github.com/rclone/rclone/fs/operations"
"github.com/rclone/rclone/lib/terminal"
)
// CompareOpt describes the Compare options in force
type CompareOpt = struct {
Modtime bool
Size bool
Checksum bool
HashType1 hash.Type
HashType2 hash.Type
NoSlowHash bool
SlowHashSyncOnly bool
SlowHashDetected bool
DownloadHash bool
}
func (b *bisyncRun) setCompareDefaults(ctx context.Context) error {
ci := fs.GetConfig(ctx)
// defaults
b.opt.Compare.Size = true
b.opt.Compare.Modtime = true
b.opt.Compare.Checksum = false
if ci.SizeOnly {
b.opt.Compare.Size = true
b.opt.Compare.Modtime = false
b.opt.Compare.Checksum = false
} else if ci.CheckSum && !b.opt.IgnoreListingChecksum {
b.opt.Compare.Size = true
b.opt.Compare.Modtime = false
b.opt.Compare.Checksum = true
}
if ci.IgnoreSize {
b.opt.Compare.Size = false
}
err = b.setFromCompareFlag(ctx)
if err != nil {
return err
}
if b.fs1.Features().SlowHash || b.fs2.Features().SlowHash {
b.opt.Compare.SlowHashDetected = true
}
if b.opt.Compare.Checksum && !b.opt.IgnoreListingChecksum {
b.setHashType(ci)
}
// Checks and Warnings
if b.opt.Compare.SlowHashSyncOnly && b.opt.Compare.SlowHashDetected && b.opt.Resync {
fs.Logf(nil, Color(terminal.Dim, "Ignoring checksums during --resync as --slow-hash-sync-only is set."))
ci.CheckSum = false
// note not setting b.opt.Compare.Checksum = false as we still want to build listings on the non-slow side, if any
} else if b.opt.Compare.Checksum && !ci.CheckSum {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: Checksums will be compared for deltas but not during sync as --checksum is not set."))
}
if b.opt.Compare.Modtime && (b.fs1.Precision() == fs.ModTimeNotSupported || b.fs2.Precision() == fs.ModTimeNotSupported) {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: Modtime compare was requested but at least one remote does not support it. It is recommended to use --checksum or --size-only instead."))
}
if (ci.CheckSum || b.opt.Compare.Checksum) && b.opt.IgnoreListingChecksum {
if (b.opt.Compare.HashType1 == hash.None || b.opt.Compare.HashType2 == hash.None) && !b.opt.Compare.DownloadHash {
fs.Logf(nil, Color(terminal.YellowFg, `WARNING: Checksum compare was requested but at least one remote does not support checksums (or checksums are being ignored) and --ignore-listing-checksum is set.
Ignoring Checksums globally and falling back to --compare modtime,size for sync. (Use --compare size or --size-only to ignore modtime). Path1 (%s): %s, Path2 (%s): %s`),
b.fs1.String(), b.opt.Compare.HashType1.String(), b.fs2.String(), b.opt.Compare.HashType2.String())
b.opt.Compare.Modtime = true
b.opt.Compare.Size = true
ci.CheckSum = false
b.opt.Compare.Checksum = false
} else {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: Ignoring checksum for deltas as --ignore-listing-checksum is set"))
// note: --checksum will still affect the internal sync calls
}
}
if !ci.CheckSum && !b.opt.Compare.Checksum && !b.opt.IgnoreListingChecksum {
fs.Infof(nil, Color(terminal.Dim, "Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set."))
b.opt.IgnoreListingChecksum = true
}
if !b.opt.Compare.Size && !b.opt.Compare.Modtime && !b.opt.Compare.Checksum {
return errors.New(Color(terminal.RedFg, "must set a Compare method. (size, modtime, and checksum can't all be false.)"))
}
notSupported := func(label string, value bool, opt *bool) {
if value {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: %s is set but bisync does not support it. It will be ignored."), label)
*opt = false
}
}
notSupported("--update", ci.UpdateOlder, &ci.UpdateOlder)
notSupported("--no-check-dest", ci.NoCheckDest, &ci.NoCheckDest)
notSupported("--no-traverse", ci.NoTraverse, &ci.NoTraverse)
// TODO: thorough search for other flags that should be on this list...
prettyprint(b.opt.Compare, "Bisyncing with Comparison Settings", fs.LogLevelInfo)
return nil
}
// returns true if the sizes are definitely different.
// returns false if equal, or if either is unknown.
func sizeDiffers(a, b int64) bool {
if a < 0 || b < 0 {
return false
}
return a != b
}
// returns true if the hashes are definitely different.
// returns false if equal, or if either is unknown.
func hashDiffers(a, b string, ht1, ht2 hash.Type, size1, size2 int64) bool {
if a == "" || b == "" {
if ht1 != hash.None && ht2 != hash.None && !(size1 <= 0 || size2 <= 0) {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: hash unexpectedly blank despite Fs support (%s, %s) (you may need to --resync!)"), a, b)
}
return false
}
if ht1 != ht2 {
if !(downloadHash && ((ht1 == hash.MD5 && ht2 == hash.None) || (ht1 == hash.None && ht2 == hash.MD5))) {
fs.Infof(nil, Color(terminal.YellowFg, "WARNING: Can't compare hashes of different types (%s, %s)"), ht1.String(), ht2.String())
return false
}
}
return a != b
}
// chooses hash type, giving priority to types both sides have in common
func (b *bisyncRun) setHashType(ci *fs.ConfigInfo) {
downloadHash = b.opt.Compare.DownloadHash
if b.opt.Compare.NoSlowHash && b.opt.Compare.SlowHashDetected {
fs.Infof(nil, "Not checking for common hash as at least one slow hash detected.")
} else {
common := b.fs1.Hashes().Overlap(b.fs2.Hashes())
if common.Count() > 0 && common.GetOne() != hash.None {
ht := common.GetOne()
b.opt.Compare.HashType1 = ht
b.opt.Compare.HashType2 = ht
if !b.opt.Compare.SlowHashSyncOnly || !b.opt.Compare.SlowHashDetected {
return
}
} else if b.opt.Compare.SlowHashSyncOnly && b.opt.Compare.SlowHashDetected {
fs.Logf(b.fs2, Color(terminal.YellowFg, "Ignoring --slow-hash-sync-only and falling back to --no-slow-hash as Path1 and Path2 have no hashes in common."))
b.opt.Compare.SlowHashSyncOnly = false
b.opt.Compare.NoSlowHash = true
ci.CheckSum = false
}
}
if !b.opt.Compare.DownloadHash && !b.opt.Compare.SlowHashSyncOnly {
fs.Logf(b.fs2, Color(terminal.YellowFg, "--checksum is in use but Path1 and Path2 have no hashes in common; falling back to --compare modtime,size for sync. (Use --compare size or --size-only to ignore modtime)"))
fs.Infof("Path1 hashes", "%v", b.fs1.Hashes().String())
fs.Infof("Path2 hashes", "%v", b.fs2.Hashes().String())
b.opt.Compare.Modtime = true
b.opt.Compare.Size = true
ci.CheckSum = false
}
if (b.opt.Compare.NoSlowHash || b.opt.Compare.SlowHashSyncOnly) && b.fs1.Features().SlowHash {
fs.Infof(nil, Color(terminal.YellowFg, "Slow hash detected on Path1. Will ignore checksum due to slow-hash settings"))
b.opt.Compare.HashType1 = hash.None
} else {
b.opt.Compare.HashType1 = b.fs1.Hashes().GetOne()
if b.opt.Compare.HashType1 != hash.None {
fs.Logf(b.fs1, Color(terminal.YellowFg, "will use %s for same-side diffs on Path1 only"), b.opt.Compare.HashType1)
}
}
if (b.opt.Compare.NoSlowHash || b.opt.Compare.SlowHashSyncOnly) && b.fs2.Features().SlowHash {
fs.Infof(nil, Color(terminal.YellowFg, "Slow hash detected on Path2. Will ignore checksum due to slow-hash settings"))
b.opt.Compare.HashType1 = hash.None
} else {
b.opt.Compare.HashType2 = b.fs2.Hashes().GetOne()
if b.opt.Compare.HashType2 != hash.None {
fs.Logf(b.fs2, Color(terminal.YellowFg, "will use %s for same-side diffs on Path2 only"), b.opt.Compare.HashType2)
}
}
if b.opt.Compare.HashType1 == hash.None && b.opt.Compare.HashType2 == hash.None && !b.opt.Compare.DownloadHash {
fs.Logf(nil, Color(terminal.YellowFg, "WARNING: Ignoring checksums globally as hashes are ignored or unavailable on both sides."))
b.opt.Compare.Checksum = false
ci.CheckSum = false
b.opt.IgnoreListingChecksum = true
}
}
// returns true if the times are definitely different (by more than the modify window).
// returns false if equal, within modify window, or if either is unknown.
// considers precision per-Fs.
func timeDiffers(ctx context.Context, a, b time.Time, fsA, fsB fs.Info) bool {
modifyWindow := fs.GetModifyWindow(ctx, fsA, fsB)
if modifyWindow == fs.ModTimeNotSupported {
return false
}
if a.IsZero() || b.IsZero() {
fs.Logf(fsA, "Fs supports modtime, but modtime is missing")
return false
}
dt := b.Sub(a)
if dt < modifyWindow && dt > -modifyWindow {
fs.Debugf(a, "modification time the same (differ by %s, within tolerance %s)", dt, modifyWindow)
return false
}
fs.Debugf(a, "Modification times differ by %s: %v, %v", dt, a, b)
return true
}
func (b *bisyncRun) setFromCompareFlag(ctx context.Context) error {
if b.opt.CompareFlag == "" {
return nil
}
var CompareFlag CompareOpt // for exlcusions
opts := strings.Split(b.opt.CompareFlag, ",")
for _, opt := range opts {
switch strings.ToLower(strings.TrimSpace(opt)) {
case "size":
b.opt.Compare.Size = true
CompareFlag.Size = true
case "modtime":
b.opt.Compare.Modtime = true
CompareFlag.Modtime = true
case "checksum":
b.opt.Compare.Checksum = true
CompareFlag.Checksum = true
default:
return fmt.Errorf(Color(terminal.RedFg, "unknown compare option: %s (must be size, modtime, or checksum)"), opt)
}
}
// exclusions (override defaults, only if --compare != "")
if !CompareFlag.Size {
b.opt.Compare.Size = false
}
if !CompareFlag.Modtime {
b.opt.Compare.Modtime = false
}
if !CompareFlag.Checksum {
b.opt.Compare.Checksum = false
}
// override sync flags to match
ci := fs.GetConfig(ctx)
if b.opt.Compare.Checksum {
ci.CheckSum = true
}
if b.opt.Compare.Modtime && !b.opt.Compare.Checksum {
ci.CheckSum = false
}
if !b.opt.Compare.Size {
ci.IgnoreSize = true
}
if !b.opt.Compare.Modtime {
ci.UseServerModTime = true
}
if b.opt.Compare.Size && !b.opt.Compare.Modtime && !b.opt.Compare.Checksum {
ci.SizeOnly = true
}
return nil
}
// downloadHash is true if we should attempt to compute hash by downloading when otherwise unavailable
var downloadHash bool
var downloadHashWarn mutex.Once
var firstDownloadHash mutex.Once
func tryDownloadHash(ctx context.Context, o fs.DirEntry, hashVal string) (string, error) {
if hashVal != "" || !downloadHash {
return hashVal, nil
}
obj, ok := o.(fs.Object)
if !ok {
fs.Infof(o, "failed to download hash -- not an fs.Object")
return hashVal, fs.ErrorObjectNotFound
}
if o.Size() < 0 {
downloadHashWarn.Do(func() {
fs.Logf(o, Color(terminal.YellowFg, "Skipping hash download as checksum not reliable with files of unknown length."))
})
fs.Debugf(o, "Skipping hash download as checksum not reliable with files of unknown length.")
return hashVal, hash.ErrUnsupported
}
firstDownloadHash.Do(func() {
fs.Infof(obj.Fs().Name(), Color(terminal.Dim, "Downloading hashes..."))
})
tr := accounting.Stats(ctx).NewCheckingTransfer(o, "computing hash with --download-hash")
defer func() {
tr.Done(ctx, nil)
}()
sum, err := operations.HashSum(ctx, hash.MD5, false, true, obj)
if err != nil {
fs.Infof(o, "DownloadHash -- hash: %v, err: %v", sum, err)
} else {
fs.Debugf(o, "DownloadHash -- hash: %v", sum)
}
return sum, err
}