rclone/cmd/bisync/listing.go
nielash 68f0998699 bisync: add options to auto-resolve conflicts - fixes #7471
Before this change, when a file was new/changed on both paths (relative to the
prior sync), and the versions on each side were not identical, bisync would
keep both versions, renaming them with ..path1 and ..path2 suffixes,
respectively. Many users have requested more control over how bisync handles
such conflicts -- including an option to automatically select one version as
the "winner" and rename or delete the "loser". This change introduces support
for such options.

--conflict-resolve CHOICE

In bisync, a "conflict" is a file that is *new* or *changed* on *both sides*
(relative to the prior run) AND is *not currently identical* on both sides.
`--conflict-resolve` controls how bisync handles such a scenario. The currently
supported options are:

- `none` - (the default) - do not attempt to pick a winner, keep and rename
both files according to `--conflict-loser` and
`--conflict-suffix` settings. For example, with the default
settings, `file.txt` on Path1 is renamed `file.txt.conflict1` and `file.txt` on
Path2 is renamed `file.txt.conflict2`. Both are copied to the opposite path
during the run, so both sides end up with a copy of both files. (As `none` is
the default, it is not necessary to specify `--conflict-resolve none` -- you
can just omit the flag.)
- `newer` - the newer file (by `modtime`) is considered the winner and is
copied without renaming. The older file (the "loser") is handled according to
`--conflict-loser` and `--conflict-suffix` settings (either renamed or
deleted.) For example, if `file.txt` on Path1 is newer than `file.txt` on
Path2, the result on both sides (with other default settings) will be `file.txt`
(winner from Path1) and `file.txt.conflict1` (loser from Path2).
- `older` - same as `newer`, except the older file is considered the winner,
and the newer file is considered the loser.
- `larger` - the larger file (by `size`) is considered the winner (regardless
of `modtime`, if any).
- `smaller` - the smaller file (by `size`) is considered the winner (regardless
of `modtime`, if any).
- `path1` - the version from Path1 is unconditionally considered the winner
(regardless of `modtime` and `size`, if any). This can be useful if one side is
usually more trusted or up-to-date than the other.
- `path2` - same as `path1`, except the path2 version is considered the
winner.

For all of the above options, note the following:
- If either of the underlying remotes lacks support for the chosen method, it
will be ignored and fall back to `none`. (For example, if `--conflict-resolve
newer` is set, but one of the paths uses a remote that doesn't support
`modtime`.)
- If a winner can't be determined because the chosen method's attribute is
missing or equal, it will be ignored and fall back to `none`. (For example, if
`--conflict-resolve newer` is set, but the Path1 and Path2 modtimes are
identical, even if the sizes may differ.)
- If the file's content is currently identical on both sides, it is not
considered a "conflict", even if new or changed on both sides since the prior
sync. (For example, if you made a change on one side and then synced it to the
other side by other means.) Therefore, none of the conflict resolution flags
apply in this scenario.
- The conflict resolution flags do not apply during a `--resync`, as there is
no "prior run" to speak of (but see `--resync-mode` for similar
options.)

--conflict-loser CHOICE

`--conflict-loser` determines what happens to the "loser" of a sync conflict
(when `--conflict-resolve` determines a winner) or to both
files (when there is no winner.) The currently supported options are:

- `num` - (the default) - auto-number the conflicts by automatically appending
the next available number to the `--conflict-suffix`, in chronological order.
For example, with the default settings, the first conflict for `file.txt` will
be renamed `file.txt.conflict1`. If `file.txt.conflict1` already exists,
`file.txt.conflict2` will be used instead (etc., up to a maximum of
9223372036854775807 conflicts.)
- `pathname` - rename the conflicts according to which side they came from,
which was the default behavior prior to `v1.66`. For example, with
`--conflict-suffix path`, `file.txt` from Path1 will be renamed
`file.txt.path1`, and `file.txt` from Path2 will be renamed `file.txt.path2`.
If two non-identical suffixes are provided (ex. `--conflict-suffix
cloud,local`), the trailing digit is omitted. Importantly, note that with
`pathname`, there is no auto-numbering beyond `2`, so if `file.txt.path2`
somehow already exists, it will be overwritten. Using a dynamic date variable
in your `--conflict-suffix` (see below) is one possible way to avoid this. Note
also that conflicts-of-conflicts are possible, if the original conflict is not
manually resolved -- for example, if for some reason you edited
`file.txt.path1` on both sides, and those edits were different, the result
would be `file.txt.path1.path1` and `file.txt.path1.path2` (in addition to
`file.txt.path2`.)
- `delete` - keep the winner only and delete the loser, instead of renaming it.
If a winner cannot be determined (see `--conflict-resolve` for details on how
this could happen), `delete` is ignored and the default `num` is used instead
(i.e. both versions are kept and renamed, and neither is deleted.) `delete` is
inherently the most destructive option, so use it only with care.

For all of the above options, note that if a winner cannot be determined (see
`--conflict-resolve` for details on how this could happen), or if
`--conflict-resolve` is not in use, *both* files will be renamed.

--conflict-suffix STRING[,STRING]

`--conflict-suffix` controls the suffix that is appended when bisync renames a
`--conflict-loser` (default: `conflict`).
`--conflict-suffix` will accept either one string or two comma-separated
strings to assign different suffixes to Path1 vs. Path2. This may be helpful
later in identifying the source of the conflict. (For example,
`--conflict-suffix dropboxconflict,laptopconflict`)

With `--conflict-loser num`, a number is always appended to the suffix. With
`--conflict-loser pathname`, a number is appended only when one suffix is
specified (or when two identical suffixes are specified.) i.e. with
`--conflict-loser pathname`, all of the following would produce exactly the
same result:

```
--conflict-suffix path
--conflict-suffix path,path
--conflict-suffix path1,path2
```

Suffixes may be as short as 1 character. By default, the suffix is appended
after any other extensions (ex. `file.jpg.conflict1`), however, this can be
changed with the `--suffix-keep-extension` flag (i.e. to instead result in
`file.conflict1.jpg`).

`--conflict-suffix` supports several *dynamic date variables* when enclosed in
curly braces as globs. This can be helpful to track the date and/or time that
each conflict was handled by bisync. For example:

```
--conflict-suffix {DateOnly}-conflict
// result: myfile.txt.2006-01-02-conflict1
```

All of the formats described [here](https://pkg.go.dev/time#pkg-constants) and
[here](https://pkg.go.dev/time#example-Time.Format) are supported, but take
care to ensure that your chosen format does not use any characters that are
illegal on your remotes (for example, macOS does not allow colons in
filenames, and slashes are also best avoided as they are often interpreted as
directory separators.) To address this particular issue, an additional
`{MacFriendlyTime}` (or just `{mac}`) option is supported, which results in
`2006-01-02 0304PM`.

Note that `--conflict-suffix` is entirely separate from rclone's main `--sufix`
flag. This is intentional, as users may wish to use both flags simultaneously,
if also using `--backup-dir`.

Finally, note that the default in bisync prior to `v1.66` was to rename
conflicts with `..path1` and `..path2` (with two periods, and `path` instead of
`conflict`.) Bisync now defaults to a single dot instead of a double dot, but
additional dots can be added by including them in the specified suffix string.
For example, for behavior equivalent to the previous default, use:

```
[--conflict-resolve none] --conflict-loser pathname --conflict-suffix .path
```
2024-01-20 17:17:01 -05:00

887 lines
26 KiB
Go

// Package bisync implements bisync
// Copyright (c) 2017-2020 Chris Nelson
package bisync
import (
"bufio"
"context"
"errors"
"fmt"
"io"
"os"
"regexp"
"sort"
"strconv"
"strings"
"time"
"github.com/rclone/rclone/cmd/bisync/bilib"
"github.com/rclone/rclone/fs"
"github.com/rclone/rclone/fs/accounting"
"github.com/rclone/rclone/fs/filter"
"github.com/rclone/rclone/fs/hash"
"github.com/rclone/rclone/fs/operations"
"golang.org/x/exp/slices"
)
// ListingHeader defines first line of a listing
const ListingHeader = "# bisync listing v1 from"
// lineRegex and lineFormat define listing line format
//
// flags <- size -> <- hash -> id <------------ modtime -----------> "<----- remote"
// - 3009805 md5:xxxxxx - 2006-01-02T15:04:05.000000000-0700 "12 - Wait.mp3"
//
// flags: "-" for a file and "d" for a directory (reserved)
// hash: "type:value" or "-" (example: "md5:378840336ab14afa9c6b8d887e68a340")
// id: "-" (reserved)
const lineFormat = "%s %8d %s %s %s %q\n"
var lineRegex = regexp.MustCompile(`^(\S) +(-?\d+) (\S+) (\S+) (\d{4}-\d\d-\d\dT\d\d:\d\d:\d\d\.\d{9}[+-]\d{4}) (".+")$`)
// timeFormat defines time format used in listings
const timeFormat = "2006-01-02T15:04:05.000000000-0700"
// TZ defines time zone used in listings
var TZ = time.UTC
var tzLocal = false
// fileInfo describes a file
type fileInfo struct {
size int64
time time.Time
hash string
id string
flags string
}
// fileList represents a listing
type fileList struct {
list []string
info map[string]*fileInfo
hash hash.Type
}
func newFileList() *fileList {
return &fileList{
info: map[string]*fileInfo{},
list: []string{},
}
}
func (ls *fileList) empty() bool {
if ls == nil {
return true
}
return len(ls.list) == 0
}
func (ls *fileList) has(file string) bool {
if file == "" {
fs.Debugf(nil, "called ls.has() with blank string")
return false
}
_, found := ls.info[file]
if !found {
//try unquoting
file, _ = strconv.Unquote(`"` + file + `"`)
_, found = ls.info[file]
}
return found
}
func (ls *fileList) get(file string) *fileInfo {
info, found := ls.info[file]
if !found {
//try unquoting
file, _ = strconv.Unquote(`"` + file + `"`)
info = ls.info[fmt.Sprint(file)]
}
return info
}
// copy file from ls to dest
func (ls *fileList) getPut(file string, dest *fileList) {
f := ls.get(file)
dest.put(file, f.size, f.time, f.hash, f.id, f.flags)
}
func (ls *fileList) getPutAll(dest *fileList) {
for file, f := range ls.info {
dest.put(file, f.size, f.time, f.hash, f.id, f.flags)
}
}
func (ls *fileList) remove(file string) {
if ls.has(file) {
ls.list = slices.Delete(ls.list, slices.Index(ls.list, file), slices.Index(ls.list, file)+1)
delete(ls.info, file)
}
}
func (ls *fileList) put(file string, size int64, modtime time.Time, hash, id string, flags string) {
fi := ls.get(file)
if fi != nil {
fi.size = size
// if already have higher precision of same time, avoid overwriting it
if fi.time != modtime {
if modtime.Before(fi.time) && fi.time.Sub(modtime) < time.Second {
modtime = fi.time
}
}
fi.time = modtime
fi.hash = hash
fi.id = id
fi.flags = flags
} else {
fi = &fileInfo{
size: size,
time: modtime,
hash: hash,
id: id,
flags: flags,
}
ls.info[file] = fi
ls.list = append(ls.list, file)
}
}
func (ls *fileList) getTryAlias(file, alias string) string {
if ls.has(file) {
return file
} else if ls.has(alias) {
return alias
}
return ""
}
func (ls *fileList) getTime(file string) time.Time {
fi := ls.get(file)
if fi == nil {
return time.Time{}
}
return fi.time
}
func (ls *fileList) getSize(file string) int64 {
fi := ls.get(file)
if fi == nil {
return 0
}
return fi.size
}
func (ls *fileList) getHash(file string) string {
fi := ls.get(file)
if fi == nil {
return ""
}
return fi.hash
}
func (b *bisyncRun) fileInfoEqual(file1, file2 string, ls1, ls2 *fileList) bool {
equal := true
if ls1.isDir(file1) && ls2.isDir(file2) {
return equal
}
if b.opt.Compare.Size {
if sizeDiffers(ls1.getSize(file1), ls2.getSize(file2)) {
b.indent("ERROR", file1, fmt.Sprintf("Size not equal in listing. Path1: %v, Path2: %v", ls1.getSize(file1), ls2.getSize(file2)))
equal = false
}
}
if b.opt.Compare.Modtime {
if timeDiffers(b.fctx, ls1.getTime(file1), ls2.getTime(file2), b.fs1, b.fs2) {
b.indent("ERROR", file1, fmt.Sprintf("Modtime not equal in listing. Path1: %v, Path2: %v", ls1.getTime(file1), ls2.getTime(file2)))
equal = false
}
}
if b.opt.Compare.Checksum && !ignoreListingChecksum {
if hashDiffers(ls1.getHash(file1), ls2.getHash(file2), b.opt.Compare.HashType1, b.opt.Compare.HashType2, ls1.getSize(file1), ls2.getSize(file2)) {
b.indent("ERROR", file1, fmt.Sprintf("Checksum not equal in listing. Path1: %v, Path2: %v", ls1.getHash(file1), ls2.getHash(file2)))
equal = false
}
}
return equal
}
// also returns false if not found
func (ls *fileList) isDir(file string) bool {
fi := ls.get(file)
if fi != nil {
if fi.flags == "d" {
return true
}
}
return false
}
func (ls *fileList) beforeOther(other *fileList, file string) bool {
thisTime := ls.getTime(file)
thatTime := other.getTime(file)
if thisTime.IsZero() || thatTime.IsZero() {
return false
}
return thisTime.Before(thatTime)
}
func (ls *fileList) afterTime(file string, time time.Time) bool {
fi := ls.get(file)
if fi == nil {
return false
}
return fi.time.After(time)
}
// sort by path name
func (ls *fileList) sort() {
sort.SliceStable(ls.list, func(i, j int) bool {
return ls.list[i] < ls.list[j]
})
}
// save will save listing to a file.
func (ls *fileList) save(ctx context.Context, listing string) error {
file, err := os.Create(listing)
if err != nil {
return err
}
ls.sort()
hashName := ""
if ls.hash != hash.None {
hashName = ls.hash.String()
}
_, err = fmt.Fprintf(file, "%s %s\n", ListingHeader, time.Now().In(TZ).Format(timeFormat))
if err != nil {
_ = file.Close()
_ = os.Remove(listing)
return err
}
for _, remote := range ls.list {
fi := ls.get(remote)
time := fi.time.In(TZ).Format(timeFormat)
hash := "-"
if hashName != "" && fi.hash != "" {
hash = hashName + ":" + fi.hash
}
id := fi.id
if id == "" {
id = "-"
}
flags := fi.flags
if flags == "" {
flags = "-"
}
_, err = fmt.Fprintf(file, lineFormat, flags, fi.size, hash, id, time, remote)
if err != nil {
_ = file.Close()
_ = os.Remove(listing)
return err
}
}
return file.Close()
}
// loadListing will load listing from a file.
// The key is the path to the file relative to the Path1/Path2 base.
func (b *bisyncRun) loadListing(listing string) (*fileList, error) {
file, err := os.Open(listing)
if err != nil {
return nil, err
}
defer func() {
_ = file.Close()
}()
reader := bufio.NewReader(file)
ls := newFileList()
lastHashName := ""
for {
line, err := reader.ReadString('\n')
if err == io.EOF {
break
}
if err != nil {
return nil, err
}
line = strings.TrimSuffix(line, "\n")
if line == "" || line[0] == '#' {
continue
}
match := lineRegex.FindStringSubmatch(line)
if match == nil {
fs.Logf(listing, "Ignoring incorrect line: %q", line)
continue
}
flags, sizeStr, hashStr := match[1], match[2], match[3]
id, timeStr, nameStr := match[4], match[5], match[6]
sizeVal, sizeErr := strconv.ParseInt(sizeStr, 10, 64)
timeVal, timeErr := time.ParseInLocation(timeFormat, timeStr, TZ)
nameVal, nameErr := strconv.Unquote(nameStr)
hashName, hashVal, hashErr := parseHash(hashStr)
if hashErr == nil && hashName != "" {
if lastHashName == "" {
lastHashName = hashName
hashErr = ls.hash.Set(hashName)
} else if hashName != lastHashName {
fs.Logf(listing, "Inconsistent hash type in line: %q", line)
continue
}
}
if (flags != "-" && flags != "d") || id != "-" || sizeErr != nil || timeErr != nil || hashErr != nil || nameErr != nil {
fs.Logf(listing, "Ignoring incorrect line: %q", line)
continue
}
if ls.has(nameVal) {
fs.Logf(listing, "Duplicate line (keeping latest): %q", line)
if ls.afterTime(nameVal, timeVal) {
continue
}
}
ls.put(nameVal, sizeVal, timeVal.In(TZ), hashVal, id, flags)
}
return ls, nil
}
// saveOldListings saves the most recent successful listing, in case we need to rollback on error
func (b *bisyncRun) saveOldListings() {
b.handleErr(b.listing1, "error saving old Path1 listing", bilib.CopyFileIfExists(b.listing1, b.listing1+"-old"), true, true)
b.handleErr(b.listing2, "error saving old Path2 listing", bilib.CopyFileIfExists(b.listing2, b.listing2+"-old"), true, true)
}
// replaceCurrentListings saves both ".lst-new" listings as ".lst"
func (b *bisyncRun) replaceCurrentListings() {
b.handleErr(b.newListing1, "error replacing Path1 listing", bilib.CopyFileIfExists(b.newListing1, b.listing1), true, true)
b.handleErr(b.newListing2, "error replacing Path2 listing", bilib.CopyFileIfExists(b.newListing2, b.listing2), true, true)
}
// revertToOldListings reverts to the most recent successful listing
func (b *bisyncRun) revertToOldListings() {
b.handleErr(b.listing1, "error reverting to old Path1 listing", bilib.CopyFileIfExists(b.listing1+"-old", b.listing1), true, true)
b.handleErr(b.listing2, "error reverting to old Path2 listing", bilib.CopyFileIfExists(b.listing2+"-old", b.listing2), true, true)
}
func parseHash(str string) (string, string, error) {
if str == "-" {
return "", "", nil
}
if pos := strings.Index(str, ":"); pos > 0 {
name, val := str[:pos], str[pos+1:]
if name != "" && val != "" {
return name, val, nil
}
}
return "", "", fmt.Errorf("invalid hash %q", str)
}
// checkListing verifies that listing is not empty (unless resynching)
func (b *bisyncRun) checkListing(ls *fileList, listing, msg string) error {
if b.opt.Resync || !ls.empty() {
return nil
}
fs.Errorf(nil, "Empty %s listing. Cannot sync to an empty directory: %s", msg, listing)
b.critical = true
b.retryable = true
return fmt.Errorf("empty %s listing: %s", msg, listing)
}
// listingNum should be 1 for path1 or 2 for path2
func (b *bisyncRun) loadListingNum(listingNum int) (*fileList, error) {
listingpath := b.basePath + ".path1.lst-new"
if listingNum == 2 {
listingpath = b.basePath + ".path2.lst-new"
}
if b.opt.DryRun {
listingpath = strings.Replace(listingpath, ".lst-", ".lst-dry-", 1)
}
fs.Debugf(nil, "loading listing for path %d at: %s", listingNum, listingpath)
return b.loadListing(listingpath)
}
func (b *bisyncRun) listDirsOnly(listingNum int) (*fileList, error) {
var fulllisting *fileList
var dirsonly = newFileList()
var err error
if !b.opt.CreateEmptySrcDirs {
return dirsonly, err
}
fulllisting, err = b.loadListingNum(listingNum)
if err != nil {
b.critical = true
b.retryable = true
fs.Debugf(nil, "Error loading listing to generate dirsonly list: %v", err)
return dirsonly, err
}
for _, obj := range fulllisting.list {
info := fulllisting.get(obj)
if info.flags == "d" {
fs.Debugf(nil, "found a dir: %s", obj)
dirsonly.put(obj, info.size, info.time, info.hash, info.id, info.flags)
} else {
fs.Debugf(nil, "not a dir: %s", obj)
}
}
return dirsonly, err
}
// ConvertPrecision returns the Modtime rounded to Dest's precision if lower, otherwise unchanged
// Need to use the other fs's precision (if lower) when copying
// Note: we need to use Truncate rather than Round so that After() is reliable.
// (2023-11-02 20:22:45.552679442 +0000 < UTC 2023-11-02 20:22:45.553 +0000 UTC)
func ConvertPrecision(Modtime time.Time, dst fs.Fs) time.Time {
DestPrecision := dst.Precision()
// In case it's wrapping an Fs with lower precision, try unwrapping and use the lowest.
if Modtime.Truncate(DestPrecision).After(Modtime.Truncate(fs.UnWrapFs(dst).Precision())) {
DestPrecision = fs.UnWrapFs(dst).Precision()
}
if Modtime.After(Modtime.Truncate(DestPrecision)) {
return Modtime.Truncate(DestPrecision)
}
return Modtime
}
// modifyListing will modify the listing based on the results of the sync
func (b *bisyncRun) modifyListing(ctx context.Context, src fs.Fs, dst fs.Fs, results []Results, queues queues, is1to2 bool) (err error) {
queue := queues.copy2to1
direction := "2to1"
if is1to2 {
queue = queues.copy1to2
direction = "1to2"
}
fs.Debugf(nil, "updating %s", direction)
prettyprint(results, "results", fs.LogLevelDebug)
prettyprint(queue, "queue", fs.LogLevelDebug)
srcListing, dstListing := b.getListingNames(is1to2)
srcList, err := b.loadListing(srcListing)
if err != nil {
return fmt.Errorf("cannot read prior listing: %w", err)
}
dstList, err := b.loadListing(dstListing)
if err != nil {
return fmt.Errorf("cannot read prior listing: %w", err)
}
// set list hash type
if b.opt.Resync && !b.opt.IgnoreListingChecksum {
if is1to2 {
srcList.hash = b.opt.Compare.HashType1
dstList.hash = b.opt.Compare.HashType2
} else {
srcList.hash = b.opt.Compare.HashType2
dstList.hash = b.opt.Compare.HashType1
}
if b.opt.Compare.DownloadHash && srcList.hash == hash.None {
srcList.hash = hash.MD5
}
if b.opt.Compare.DownloadHash && dstList.hash == hash.None {
dstList.hash = hash.MD5
}
}
b.debugFn(b.DebugName, func() {
var rs ResultsSlice = results
b.debug(b.DebugName, fmt.Sprintf("modifyListing direction: %s, results has name?: %v", direction, rs.has(b.DebugName)))
b.debug(b.DebugName, fmt.Sprintf("modifyListing direction: %s, srcList has name?: %v, dstList has name?: %v", direction, srcList.has(b.DebugName), dstList.has(b.DebugName)))
})
srcWinners := newFileList()
dstWinners := newFileList()
errors := newFileList()
ctxRecheck, filterRecheck := filter.AddConfig(ctx)
for _, result := range results {
if result.Name == "" {
continue
}
if result.AltName != "" {
b.aliases.Add(result.Name, result.AltName)
}
if result.Flags == "d" && !b.opt.CreateEmptySrcDirs {
continue
}
// build src winners list
if result.IsSrc && result.Src != "" && (result.Winner.Err == nil || result.Flags == "d") {
srcWinners.put(result.Name, result.Size, ConvertPrecision(result.Modtime, src), result.Hash, "-", result.Flags)
prettyprint(result, "winner: copy to src", fs.LogLevelDebug)
}
// build dst winners list
if result.IsWinner && result.Winner.Side != "none" && (result.Winner.Err == nil || result.Flags == "d") {
dstWinners.put(result.Name, result.Size, ConvertPrecision(result.Modtime, dst), result.Hash, "-", result.Flags)
prettyprint(result, "winner: copy to dst", fs.LogLevelDebug)
}
// build errors list
if result.Err != nil || result.Winner.Err != nil {
errors.put(result.Name, result.Size, result.Modtime, result.Hash, "-", result.Flags)
if err := filterRecheck.AddFile(result.Name); err != nil {
fs.Debugf(result.Name, "error adding file to recheck filter: %v", err)
}
}
}
ci := fs.GetConfig(ctx)
updateLists := func(side string, winners, list *fileList) {
for _, queueFile := range queue.ToList() {
if !winners.has(queueFile) && list.has(queueFile) && !errors.has(queueFile) {
// removals from side
list.remove(queueFile)
fs.Debugf(nil, "decision: removed from %s: %v", side, queueFile)
} else if winners.has(queueFile) {
// copies to side
new := winners.get(queueFile)
// handle normalization
if side == "dst" {
alias := b.aliases.Alias(queueFile)
if alias != queueFile {
// use the (non-identical) existing name, unless --fix-case
if ci.FixCase {
fs.Debugf(direction, "removing %s and adding %s as --fix-case was specified", alias, queueFile)
list.remove(alias)
} else {
fs.Debugf(direction, "casing/unicode difference detected. using %s instead of %s", alias, queueFile)
queueFile = alias
}
}
}
list.put(queueFile, new.size, new.time, new.hash, new.id, new.flags)
fs.Debugf(nil, "decision: copied to %s: %v", side, queueFile)
} else {
fs.Debugf(queueFile, "file in queue but missing from %s transfers", side)
if err := filterRecheck.AddFile(queueFile); err != nil {
fs.Debugf(queueFile, "error adding file to recheck filter: %v", err)
}
}
}
}
updateLists("src", srcWinners, srcList)
updateLists("dst", dstWinners, dstList)
// account for "deltaOthers" we handled separately
if queues.deletedonboth.NotEmpty() {
for file := range queues.deletedonboth {
srcList.remove(file)
dstList.remove(file)
}
}
if b.renames.NotEmpty() && !b.opt.DryRun {
// renamed on src and copied to dst
for _, rename := range b.renames {
srcOldName, srcNewName, dstOldName, dstNewName := rename.getNames(is1to2)
fs.Debugf(nil, "%s: srcOldName: %v srcNewName: %v dstOldName: %v dstNewName: %v", direction, srcOldName, srcNewName, dstOldName, dstNewName)
// we'll handle the other side when we go the other direction
var new *fileInfo
// we prefer to get the info from the newNamed versions
// since they were actually copied as opposed to operations.MoveFile()'d.
// the size/time/hash info is therefore fresher on the renames
// but we'll settle for the original if we have to.
if srcList.has(srcNewName) {
new = srcList.get(srcNewName)
} else if srcList.has(dstNewName) {
new = srcList.get(dstNewName)
} else if srcList.has(srcOldName) {
new = srcList.get(srcOldName)
} else {
// something's odd, so let's recheck
if err := filterRecheck.AddFile(srcOldName); err != nil {
fs.Debugf(srcOldName, "error adding file to recheck filter: %v", err)
}
}
if srcNewName != "" { // if it was renamed and not deleted
srcList.put(srcNewName, new.size, new.time, new.hash, new.id, new.flags)
dstList.put(srcNewName, new.size, ConvertPrecision(new.time, src), new.hash, new.id, new.flags)
}
if srcNewName != srcOldName {
srcList.remove(srcOldName)
}
if srcNewName != dstOldName {
dstList.remove(dstOldName)
}
}
}
// recheck the ones we skipped because they were equal
// we never got their info because they were never synced.
// TODO: add flag to skip this? (since it re-lists)
if queues.renameSkipped.NotEmpty() {
skippedList := queues.renameSkipped.ToList()
for _, file := range skippedList {
if err := filterRecheck.AddFile(file); err != nil {
fs.Debugf(file, "error adding file to recheck filter: %v", err)
}
}
}
// skipped dirs -- nothing to recheck, just add them
// (they are not necessarily there already, if they are new)
path1List := srcList
path2List := dstList
if !is1to2 {
path1List = dstList
path2List = srcList
}
if !queues.skippedDirs1.empty() {
queues.skippedDirs1.getPutAll(path1List)
}
if !queues.skippedDirs2.empty() {
queues.skippedDirs2.getPutAll(path2List)
}
if filterRecheck.HaveFilesFrom() {
// also include any aliases
recheckFiles := filterRecheck.Files()
for recheckFile := range recheckFiles {
alias := b.aliases.Alias(recheckFile)
if recheckFile != alias {
if err := filterRecheck.AddFile(alias); err != nil {
fs.Debugf(alias, "error adding file to recheck filter: %v", err)
}
}
}
b.recheck(ctxRecheck, src, dst, srcList, dstList, is1to2)
}
if b.InGracefulShutdown {
var toKeep []string
var toRollback []string
fs.Debugf(direction, "stats for %s", direction)
trs := accounting.Stats(ctx).Transferred()
for _, tr := range trs {
b.debugFn(tr.Name, func() {
prettyprint(tr, tr.Name, fs.LogLevelInfo)
})
if tr.Error == nil && tr.Bytes > 0 || tr.Size <= 0 {
prettyprint(tr, "keeping: "+tr.Name, fs.LogLevelDebug)
toKeep = append(toKeep, tr.Name)
}
}
// Dirs (for the unlikely event that the shutdown was triggered post-sync during syncEmptyDirs)
for _, r := range results {
if r.Origin == "syncEmptyDirs" {
if srcWinners.has(r.Name) || dstWinners.has(r.Name) {
toKeep = append(toKeep, r.Name)
fs.Infof(r.Name, "keeping empty dir")
}
}
}
oldSrc, oldDst := b.getOldLists(is1to2)
prettyprint(oldSrc.list, "oldSrc", fs.LogLevelDebug)
prettyprint(oldDst.list, "oldDst", fs.LogLevelDebug)
prettyprint(srcList.list, "srcList", fs.LogLevelDebug)
prettyprint(dstList.list, "dstList", fs.LogLevelDebug)
combinedList := Concat(oldSrc.list, oldDst.list, srcList.list, dstList.list)
for _, f := range combinedList {
if !slices.Contains(toKeep, f) && !slices.Contains(toKeep, b.aliases.Alias(f)) && !b.opt.DryRun {
toRollback = append(toRollback, f)
}
}
b.prepareRollback(toRollback, srcList, dstList, is1to2)
prettyprint(oldSrc.list, "oldSrc", fs.LogLevelDebug)
prettyprint(oldDst.list, "oldDst", fs.LogLevelDebug)
prettyprint(srcList.list, "srcList", fs.LogLevelDebug)
prettyprint(dstList.list, "dstList", fs.LogLevelDebug)
// clear stats so we only do this once
accounting.MaxCompletedTransfers = 0
accounting.Stats(ctx).PruneTransfers()
}
if b.DebugName != "" {
b.debug(b.DebugName, fmt.Sprintf("%s pre-save srcList has it?: %v", direction, srcList.has(b.DebugName)))
b.debug(b.DebugName, fmt.Sprintf("%s pre-save dstList has it?: %v", direction, dstList.has(b.DebugName)))
}
// update files
err = srcList.save(ctx, srcListing)
b.handleErr(srcList, "error saving srcList from modifyListing", err, true, true)
err = dstList.save(ctx, dstListing)
b.handleErr(dstList, "error saving dstList from modifyListing", err, true, true)
return err
}
// recheck the ones we're not sure about
func (b *bisyncRun) recheck(ctxRecheck context.Context, src, dst fs.Fs, srcList, dstList *fileList, is1to2 bool) {
var srcObjs []fs.Object
var dstObjs []fs.Object
var resolved []string
var toRollback []string
if err := operations.ListFn(ctxRecheck, src, func(obj fs.Object) {
srcObjs = append(srcObjs, obj)
}); err != nil {
fs.Debugf(src, "error recchecking src obj: %v", err)
}
if err := operations.ListFn(ctxRecheck, dst, func(obj fs.Object) {
dstObjs = append(dstObjs, obj)
}); err != nil {
fs.Debugf(dst, "error recchecking dst obj: %v", err)
}
putObj := func(obj fs.Object, list *fileList) {
hashVal := ""
if !b.opt.IgnoreListingChecksum {
hashType := list.hash
if hashType != hash.None {
hashVal, _ = obj.Hash(ctxRecheck, hashType)
}
hashVal, _ = tryDownloadHash(ctxRecheck, obj, hashVal)
}
var modtime time.Time
if b.opt.Compare.Modtime {
modtime = obj.ModTime(ctxRecheck).In(TZ)
}
list.put(obj.Remote(), obj.Size(), modtime, hashVal, "-", "-")
}
for _, srcObj := range srcObjs {
fs.Debugf(srcObj, "rechecking")
for _, dstObj := range dstObjs {
if srcObj.Remote() == dstObj.Remote() || srcObj.Remote() == b.aliases.Alias(dstObj.Remote()) {
// note: unlike Equal(), WhichEqual() does not update the modtime in dest if sums match but modtimes don't.
if b.opt.DryRun || WhichEqual(ctxRecheck, srcObj, dstObj, src, dst) {
putObj(srcObj, srcList)
putObj(dstObj, dstList)
resolved = append(resolved, srcObj.Remote())
} else {
fs.Infof(srcObj, "files not equal on recheck: %v %v", srcObj, dstObj)
}
}
}
// if srcObj not resolved by now (either because no dstObj match or files not equal),
// roll it back to old version, so it gets retried next time.
// skip and error during --resync, as rollback is not possible
if !slices.Contains(resolved, srcObj.Remote()) && !b.opt.DryRun {
if b.opt.Resync {
err = errors.New("no dstObj match or files not equal")
b.handleErr(srcObj, "Unable to rollback during --resync", err, true, false)
} else {
toRollback = append(toRollback, srcObj.Remote())
}
}
}
if len(toRollback) > 0 {
srcListing, dstListing := b.getListingNames(is1to2)
oldSrc, err := b.loadListing(srcListing + "-old")
b.handleErr(oldSrc, "error loading old src listing", err, true, true)
oldDst, err := b.loadListing(dstListing + "-old")
b.handleErr(oldDst, "error loading old dst listing", err, true, true)
if b.critical {
return
}
for _, item := range toRollback {
b.rollback(item, oldSrc, srcList)
b.rollback(item, oldDst, dstList)
}
}
}
func (b *bisyncRun) getListingNames(is1to2 bool) (srcListing string, dstListing string) {
if is1to2 {
return b.listing1, b.listing2
}
return b.listing2, b.listing1
}
func (b *bisyncRun) rollback(item string, oldList, newList *fileList) {
alias := b.aliases.Alias(item)
if oldList.has(item) {
oldList.getPut(item, newList)
fs.Debugf(nil, "adding to newlist: %s", item)
} else if oldList.has(alias) {
oldList.getPut(alias, newList)
fs.Debugf(nil, "adding to newlist: %s", alias)
} else {
fs.Debugf(nil, "removing from newlist: %s (has it?: %v)", item, newList.has(item))
prettyprint(newList.list, "newList", fs.LogLevelDebug)
newList.remove(item)
newList.remove(alias)
}
}
func (b *bisyncRun) prepareRollback(toRollback []string, srcList, dstList *fileList, is1to2 bool) {
if len(toRollback) > 0 {
oldSrc, oldDst := b.getOldLists(is1to2)
if b.critical {
return
}
fs.Debugf("new lists", "src: (%v), dest: (%v)", len(srcList.list), len(dstList.list))
for _, item := range toRollback {
b.debugFn(item, func() {
b.debug(item, fmt.Sprintf("pre-rollback oldSrc has it?: %v", oldSrc.has(item)))
b.debug(item, fmt.Sprintf("pre-rollback oldDst has it?: %v", oldDst.has(item)))
b.debug(item, fmt.Sprintf("pre-rollback srcList has it?: %v", srcList.has(item)))
b.debug(item, fmt.Sprintf("pre-rollback dstList has it?: %v", dstList.has(item)))
})
b.rollback(item, oldSrc, srcList)
b.rollback(item, oldDst, dstList)
b.debugFn(item, func() {
b.debug(item, fmt.Sprintf("post-rollback oldSrc has it?: %v", oldSrc.has(item)))
b.debug(item, fmt.Sprintf("post-rollback oldDst has it?: %v", oldDst.has(item)))
b.debug(item, fmt.Sprintf("post-rollback srcList has it?: %v", srcList.has(item)))
b.debug(item, fmt.Sprintf("post-rollback dstList has it?: %v", dstList.has(item)))
})
}
}
}
func (b *bisyncRun) getOldLists(is1to2 bool) (*fileList, *fileList) {
srcListing, dstListing := b.getListingNames(is1to2)
oldSrc, err := b.loadListing(srcListing + "-old")
b.handleErr(oldSrc, "error loading old src listing", err, true, true)
oldDst, err := b.loadListing(dstListing + "-old")
b.handleErr(oldDst, "error loading old dst listing", err, true, true)
fs.Debugf("get old lists", "is1to2: %v, oldsrc: %s (%v), olddest: %s (%v)", is1to2, srcListing+"-old", len(oldSrc.list), dstListing+"-old", len(oldDst.list))
return oldSrc, oldDst
}
// Concat returns a new slice concatenating the passed in slices.
func Concat[S ~[]E, E any](ss ...S) S {
size := 0
for _, s := range ss {
size += len(s)
if size < 0 {
panic("len out of range")
}
}
newslice := slices.Grow[S](nil, size)
for _, s := range ss {
newslice = append(newslice, s...)
}
return newslice
}