package recoveryservicessiterecovery

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"net/http"
)

// ReplicationProtectedItemsClient is the client for the ReplicationProtectedItems methods of the
// Recoveryservicessiterecovery service.
type ReplicationProtectedItemsClient struct {
	ManagementClient
}

// NewReplicationProtectedItemsClient creates an instance of the ReplicationProtectedItemsClient client.
func NewReplicationProtectedItemsClient(subscriptionID string, resourceGroupName string, resourceName string) ReplicationProtectedItemsClient {
	return NewReplicationProtectedItemsClientWithBaseURI(DefaultBaseURI, subscriptionID, resourceGroupName, resourceName)
}

// NewReplicationProtectedItemsClientWithBaseURI creates an instance of the ReplicationProtectedItemsClient client.
func NewReplicationProtectedItemsClientWithBaseURI(baseURI string, subscriptionID string, resourceGroupName string, resourceName string) ReplicationProtectedItemsClient {
	return ReplicationProtectedItemsClient{NewWithBaseURI(baseURI, subscriptionID, resourceGroupName, resourceName)}
}

// ApplyRecoveryPoint the operation to change the recovery point of a failed over replication protected item. This
// method may poll for completion. Polling can be canceled by passing the cancel channel argument. The channel will be
// used to cancel polling and any outstanding HTTP requests.
//
// fabricName is the ARM fabric name. protectionContainerName is the protection container name.
// replicatedProtectedItemName is the replicated protected item's name. applyRecoveryPointInput is the
// ApplyRecoveryPointInput.
func (client ReplicationProtectedItemsClient) ApplyRecoveryPoint(fabricName string, protectionContainerName string, replicatedProtectedItemName string, applyRecoveryPointInput ApplyRecoveryPointInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.ApplyRecoveryPointPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, applyRecoveryPointInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ApplyRecoveryPoint", nil, "Failure preparing request")
			return
		}

		resp, err := client.ApplyRecoveryPointSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ApplyRecoveryPoint", resp, "Failure sending request")
			return
		}

		result, err = client.ApplyRecoveryPointResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ApplyRecoveryPoint", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// ApplyRecoveryPointPreparer prepares the ApplyRecoveryPoint request.
func (client ReplicationProtectedItemsClient) ApplyRecoveryPointPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, applyRecoveryPointInput ApplyRecoveryPointInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/applyRecoveryPoint", pathParameters),
		autorest.WithJSON(applyRecoveryPointInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// ApplyRecoveryPointSender sends the ApplyRecoveryPoint request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) ApplyRecoveryPointSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// ApplyRecoveryPointResponder handles the response to the ApplyRecoveryPoint request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) ApplyRecoveryPointResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Create the operation to create an ASR replication protected item (Enable replication). This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is name of the fabric. protectionContainerName is protection container name. replicatedProtectedItemName
// is a name for the replication protected item. input is enable Protection Input.
func (client ReplicationProtectedItemsClient) Create(fabricName string, protectionContainerName string, replicatedProtectedItemName string, input EnableProtectionInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.CreatePreparer(fabricName, protectionContainerName, replicatedProtectedItemName, input, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Create", nil, "Failure preparing request")
			return
		}

		resp, err := client.CreateSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Create", resp, "Failure sending request")
			return
		}

		result, err = client.CreateResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Create", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// CreatePreparer prepares the Create request.
func (client ReplicationProtectedItemsClient) CreatePreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, input EnableProtectionInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}", pathParameters),
		autorest.WithJSON(input),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// CreateSender sends the Create request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) CreateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// CreateResponder handles the response to the Create request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) CreateResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete the operation to disable replication on a replication protected item. This will also remove the item. This
// method may poll for completion. Polling can be canceled by passing the cancel channel argument. The channel will be
// used to cancel polling and any outstanding HTTP requests.
//
// fabricName is fabric name. protectionContainerName is protection container name. replicatedProtectedItemName is
// replication protected item name. disableProtectionInput is disable protection input.
func (client ReplicationProtectedItemsClient) Delete(fabricName string, protectionContainerName string, replicatedProtectedItemName string, disableProtectionInput DisableProtectionInput, cancel <-chan struct{}) (<-chan autorest.Response, <-chan error) {
	resultChan := make(chan autorest.Response, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result autorest.Response
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.DeletePreparer(fabricName, protectionContainerName, replicatedProtectedItemName, disableProtectionInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Delete", nil, "Failure preparing request")
			return
		}

		resp, err := client.DeleteSender(req)
		if err != nil {
			result.Response = resp
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Delete", resp, "Failure sending request")
			return
		}

		result, err = client.DeleteResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Delete", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// DeletePreparer prepares the Delete request.
func (client ReplicationProtectedItemsClient) DeletePreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, disableProtectionInput DisableProtectionInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/remove", pathParameters),
		autorest.WithJSON(disableProtectionInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// FailoverCommit operation to commit the failover of the replication protected item. This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name.
func (client ReplicationProtectedItemsClient) FailoverCommit(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.FailoverCommitPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "FailoverCommit", nil, "Failure preparing request")
			return
		}

		resp, err := client.FailoverCommitSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "FailoverCommit", resp, "Failure sending request")
			return
		}

		result, err = client.FailoverCommitResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "FailoverCommit", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// FailoverCommitPreparer prepares the FailoverCommit request.
func (client ReplicationProtectedItemsClient) FailoverCommitPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/failoverCommit", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// FailoverCommitSender sends the FailoverCommit request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) FailoverCommitSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// FailoverCommitResponder handles the response to the FailoverCommit request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) FailoverCommitResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Get gets the details of an ASR replication protected item.
//
// fabricName is fabric unique name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name.
func (client ReplicationProtectedItemsClient) Get(fabricName string, protectionContainerName string, replicatedProtectedItemName string) (result ReplicationProtectedItem, err error) {
	req, err := client.GetPreparer(fabricName, protectionContainerName, replicatedProtectedItemName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Get", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Get", resp, "Failure sending request")
		return
	}

	result, err = client.GetResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Get", resp, "Failure responding to request")
	}

	return
}

// GetPreparer prepares the Get request.
func (client ReplicationProtectedItemsClient) GetPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) GetSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) GetResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List gets the list of ASR replication protected items in the vault.
//
// skipToken is the pagination token. Possible values: "FabricId" or "FabricId_CloudId" or null filter is oData filter
// options.
func (client ReplicationProtectedItemsClient) List(skipToken string, filter string) (result ReplicationProtectedItemCollection, err error) {
	req, err := client.ListPreparer(skipToken, filter)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", resp, "Failure sending request")
		return
	}

	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", resp, "Failure responding to request")
	}

	return
}

// ListPreparer prepares the List request.
func (client ReplicationProtectedItemsClient) ListPreparer(skipToken string, filter string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if len(skipToken) > 0 {
		queryParameters["skipToken"] = autorest.Encode("query", skipToken)
	}
	if len(filter) > 0 {
		queryParameters["$filter"] = autorest.Encode("query", filter)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationProtectedItems", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) ListSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) ListResponder(resp *http.Response) (result ReplicationProtectedItemCollection, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListNextResults retrieves the next set of results, if any.
func (client ReplicationProtectedItemsClient) ListNextResults(lastResults ReplicationProtectedItemCollection) (result ReplicationProtectedItemCollection, err error) {
	req, err := lastResults.ReplicationProtectedItemCollectionPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", resp, "Failure sending next results request")
	}

	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "List", resp, "Failure responding to next results request")
	}

	return
}

// ListComplete gets all elements from the list without paging.
func (client ReplicationProtectedItemsClient) ListComplete(skipToken string, filter string, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem)
	errChan := make(chan error, 1)
	go func() {
		defer func() {
			close(resultChan)
			close(errChan)
		}()
		list, err := client.List(skipToken, filter)
		if err != nil {
			errChan <- err
			return
		}
		if list.Value != nil {
			for _, item := range *list.Value {
				select {
				case <-cancel:
					return
				case resultChan <- item:
					// Intentionally left blank
				}
			}
		}
		for list.NextLink != nil {
			list, err = client.ListNextResults(list)
			if err != nil {
				errChan <- err
				return
			}
			if list.Value != nil {
				for _, item := range *list.Value {
					select {
					case <-cancel:
						return
					case resultChan <- item:
						// Intentionally left blank
					}
				}
			}
		}
	}()
	return resultChan, errChan
}

// ListByReplicationProtectionContainers gets the list of ASR replication protected items in the protection container.
//
// fabricName is fabric name. protectionContainerName is protection container name.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainers(fabricName string, protectionContainerName string) (result ReplicationProtectedItemCollection, err error) {
	req, err := client.ListByReplicationProtectionContainersPreparer(fabricName, protectionContainerName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListByReplicationProtectionContainersSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", resp, "Failure sending request")
		return
	}

	result, err = client.ListByReplicationProtectionContainersResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", resp, "Failure responding to request")
	}

	return
}

// ListByReplicationProtectionContainersPreparer prepares the ListByReplicationProtectionContainers request.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainersPreparer(fabricName string, protectionContainerName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":              autorest.Encode("path", fabricName),
		"protectionContainerName": autorest.Encode("path", protectionContainerName),
		"resourceGroupName":       autorest.Encode("path", client.ResourceGroupName),
		"resourceName":            autorest.Encode("path", client.ResourceName),
		"subscriptionId":          autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListByReplicationProtectionContainersSender sends the ListByReplicationProtectionContainers request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainersSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListByReplicationProtectionContainersResponder handles the response to the ListByReplicationProtectionContainers request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainersResponder(resp *http.Response) (result ReplicationProtectedItemCollection, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListByReplicationProtectionContainersNextResults retrieves the next set of results, if any.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainersNextResults(lastResults ReplicationProtectedItemCollection) (result ReplicationProtectedItemCollection, err error) {
	req, err := lastResults.ReplicationProtectedItemCollectionPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}

	resp, err := client.ListByReplicationProtectionContainersSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", resp, "Failure sending next results request")
	}

	result, err = client.ListByReplicationProtectionContainersResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "ListByReplicationProtectionContainers", resp, "Failure responding to next results request")
	}

	return
}

// ListByReplicationProtectionContainersComplete gets all elements from the list without paging.
func (client ReplicationProtectedItemsClient) ListByReplicationProtectionContainersComplete(fabricName string, protectionContainerName string, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem)
	errChan := make(chan error, 1)
	go func() {
		defer func() {
			close(resultChan)
			close(errChan)
		}()
		list, err := client.ListByReplicationProtectionContainers(fabricName, protectionContainerName)
		if err != nil {
			errChan <- err
			return
		}
		if list.Value != nil {
			for _, item := range *list.Value {
				select {
				case <-cancel:
					return
				case resultChan <- item:
					// Intentionally left blank
				}
			}
		}
		for list.NextLink != nil {
			list, err = client.ListByReplicationProtectionContainersNextResults(list)
			if err != nil {
				errChan <- err
				return
			}
			if list.Value != nil {
				for _, item := range *list.Value {
					select {
					case <-cancel:
						return
					case resultChan <- item:
						// Intentionally left blank
					}
				}
			}
		}
	}()
	return resultChan, errChan
}

// PlannedFailover operation to initiate a planned failover of the replication protected item. This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name. failoverInput is disable protection input.
func (client ReplicationProtectedItemsClient) PlannedFailover(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput PlannedFailoverInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.PlannedFailoverPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, failoverInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "PlannedFailover", nil, "Failure preparing request")
			return
		}

		resp, err := client.PlannedFailoverSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "PlannedFailover", resp, "Failure sending request")
			return
		}

		result, err = client.PlannedFailoverResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "PlannedFailover", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// PlannedFailoverPreparer prepares the PlannedFailover request.
func (client ReplicationProtectedItemsClient) PlannedFailoverPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput PlannedFailoverInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/plannedFailover", pathParameters),
		autorest.WithJSON(failoverInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// PlannedFailoverSender sends the PlannedFailover request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) PlannedFailoverSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// PlannedFailoverResponder handles the response to the PlannedFailover request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) PlannedFailoverResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Purge the operation to delete or purge a replication protected item. This operation will force delete the
// replication protected item. Use the remove operation on replication protected item to perform a clean disable
// replication for the item. This method may poll for completion. Polling can be canceled by passing the cancel channel
// argument. The channel will be used to cancel polling and any outstanding HTTP requests.
//
// fabricName is fabric name. protectionContainerName is protection container name. replicatedProtectedItemName is
// replication protected item name.
func (client ReplicationProtectedItemsClient) Purge(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (<-chan autorest.Response, <-chan error) {
	resultChan := make(chan autorest.Response, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result autorest.Response
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.PurgePreparer(fabricName, protectionContainerName, replicatedProtectedItemName, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Purge", nil, "Failure preparing request")
			return
		}

		resp, err := client.PurgeSender(req)
		if err != nil {
			result.Response = resp
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Purge", resp, "Failure sending request")
			return
		}

		result, err = client.PurgeResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Purge", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// PurgePreparer prepares the Purge request.
func (client ReplicationProtectedItemsClient) PurgePreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// PurgeSender sends the Purge request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) PurgeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// PurgeResponder handles the response to the Purge request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) PurgeResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// RepairReplication the operation to start resynchronize/repair replication for a replication protected item requiring
// resynchronization. This method may poll for completion. Polling can be canceled by passing the cancel channel
// argument. The channel will be used to cancel polling and any outstanding HTTP requests.
//
// fabricName is the name of the fabric. protectionContainerName is the name of the container.
// replicatedProtectedItemName is the name of the replication protected item.
func (client ReplicationProtectedItemsClient) RepairReplication(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.RepairReplicationPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "RepairReplication", nil, "Failure preparing request")
			return
		}

		resp, err := client.RepairReplicationSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "RepairReplication", resp, "Failure sending request")
			return
		}

		result, err = client.RepairReplicationResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "RepairReplication", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// RepairReplicationPreparer prepares the RepairReplication request.
func (client ReplicationProtectedItemsClient) RepairReplicationPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/repairReplication", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// RepairReplicationSender sends the RepairReplication request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) RepairReplicationSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// RepairReplicationResponder handles the response to the RepairReplication request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) RepairReplicationResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Reprotect operation to reprotect or reverse replicate a failed over replication protected item. This method may poll
// for completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name. rrInput is disable protection input.
func (client ReplicationProtectedItemsClient) Reprotect(fabricName string, protectionContainerName string, replicatedProtectedItemName string, rrInput ReverseReplicationInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.ReprotectPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, rrInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Reprotect", nil, "Failure preparing request")
			return
		}

		resp, err := client.ReprotectSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Reprotect", resp, "Failure sending request")
			return
		}

		result, err = client.ReprotectResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Reprotect", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// ReprotectPreparer prepares the Reprotect request.
func (client ReplicationProtectedItemsClient) ReprotectPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, rrInput ReverseReplicationInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/reProtect", pathParameters),
		autorest.WithJSON(rrInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// ReprotectSender sends the Reprotect request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) ReprotectSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// ReprotectResponder handles the response to the Reprotect request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) ReprotectResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// TestFailover operation to perform a test failover of the replication protected item. This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name. failoverInput is test failover input.
func (client ReplicationProtectedItemsClient) TestFailover(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput TestFailoverInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.TestFailoverPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, failoverInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailover", nil, "Failure preparing request")
			return
		}

		resp, err := client.TestFailoverSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailover", resp, "Failure sending request")
			return
		}

		result, err = client.TestFailoverResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailover", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// TestFailoverPreparer prepares the TestFailover request.
func (client ReplicationProtectedItemsClient) TestFailoverPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput TestFailoverInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/testFailover", pathParameters),
		autorest.WithJSON(failoverInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// TestFailoverSender sends the TestFailover request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) TestFailoverSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// TestFailoverResponder handles the response to the TestFailover request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) TestFailoverResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// TestFailoverCleanup operation to clean up the test failover of a replication protected item. This method may poll
// for completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name. cleanupInput is test failover cleanup input.
func (client ReplicationProtectedItemsClient) TestFailoverCleanup(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cleanupInput TestFailoverCleanupInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	if err := validation.Validate([]validation.Validation{
		{TargetValue: cleanupInput,
			Constraints: []validation.Constraint{{Target: "cleanupInput.Properties", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		errChan <- validation.NewErrorWithValidationError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailoverCleanup")
		close(errChan)
		close(resultChan)
		return resultChan, errChan
	}

	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.TestFailoverCleanupPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, cleanupInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailoverCleanup", nil, "Failure preparing request")
			return
		}

		resp, err := client.TestFailoverCleanupSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailoverCleanup", resp, "Failure sending request")
			return
		}

		result, err = client.TestFailoverCleanupResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "TestFailoverCleanup", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// TestFailoverCleanupPreparer prepares the TestFailoverCleanup request.
func (client ReplicationProtectedItemsClient) TestFailoverCleanupPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, cleanupInput TestFailoverCleanupInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/testFailoverCleanup", pathParameters),
		autorest.WithJSON(cleanupInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// TestFailoverCleanupSender sends the TestFailoverCleanup request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) TestFailoverCleanupSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// TestFailoverCleanupResponder handles the response to the TestFailoverCleanup request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) TestFailoverCleanupResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UnplannedFailover operation to initiate a failover of the replication protected item. This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is unique fabric name. protectionContainerName is protection container name. replicatedProtectedItemName
// is replication protected item name. failoverInput is disable protection input.
func (client ReplicationProtectedItemsClient) UnplannedFailover(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput UnplannedFailoverInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.UnplannedFailoverPreparer(fabricName, protectionContainerName, replicatedProtectedItemName, failoverInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UnplannedFailover", nil, "Failure preparing request")
			return
		}

		resp, err := client.UnplannedFailoverSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UnplannedFailover", resp, "Failure sending request")
			return
		}

		result, err = client.UnplannedFailoverResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UnplannedFailover", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// UnplannedFailoverPreparer prepares the UnplannedFailover request.
func (client ReplicationProtectedItemsClient) UnplannedFailoverPreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, failoverInput UnplannedFailoverInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}/unplannedFailover", pathParameters),
		autorest.WithJSON(failoverInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// UnplannedFailoverSender sends the UnplannedFailover request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) UnplannedFailoverSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// UnplannedFailoverResponder handles the response to the UnplannedFailover request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) UnplannedFailoverResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Update the operation to update the recovery settings of an ASR replication protected item. This method may poll for
// completion. Polling can be canceled by passing the cancel channel argument. The channel will be used to cancel
// polling and any outstanding HTTP requests.
//
// fabricName is fabric name. protectionContainerName is protection container name. replicatedProtectedItemName is
// replication protected item name. updateProtectionInput is update protection input.
func (client ReplicationProtectedItemsClient) Update(fabricName string, protectionContainerName string, replicatedProtectedItemName string, updateProtectionInput UpdateReplicationProtectedItemInput, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.UpdatePreparer(fabricName, protectionContainerName, replicatedProtectedItemName, updateProtectionInput, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Update", nil, "Failure preparing request")
			return
		}

		resp, err := client.UpdateSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Update", resp, "Failure sending request")
			return
		}

		result, err = client.UpdateResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "Update", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// UpdatePreparer prepares the Update request.
func (client ReplicationProtectedItemsClient) UpdatePreparer(fabricName string, protectionContainerName string, replicatedProtectedItemName string, updateProtectionInput UpdateReplicationProtectedItemInput, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                  autorest.Encode("path", fabricName),
		"protectionContainerName":     autorest.Encode("path", protectionContainerName),
		"replicatedProtectedItemName": autorest.Encode("path", replicatedProtectedItemName),
		"resourceGroupName":           autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                autorest.Encode("path", client.ResourceName),
		"subscriptionId":              autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicatedProtectedItemName}", pathParameters),
		autorest.WithJSON(updateProtectionInput),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) UpdateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) UpdateResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateMobilityService the operation to update(push update) the installed mobility service software on a replication
// protected item to the latest available version. This method may poll for completion. Polling can be canceled by
// passing the cancel channel argument. The channel will be used to cancel polling and any outstanding HTTP requests.
//
// fabricName is the name of the fabric containing the protected item. protectionContainerName is the name of the
// container containing the protected item. replicationProtectedItemName is the name of the protected item on which the
// agent is to be updated. updateMobilityServiceRequest is request to update the mobility service on the protected
// item.
func (client ReplicationProtectedItemsClient) UpdateMobilityService(fabricName string, protectionContainerName string, replicationProtectedItemName string, updateMobilityServiceRequest UpdateMobilityServiceRequest, cancel <-chan struct{}) (<-chan ReplicationProtectedItem, <-chan error) {
	resultChan := make(chan ReplicationProtectedItem, 1)
	errChan := make(chan error, 1)
	go func() {
		var err error
		var result ReplicationProtectedItem
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.UpdateMobilityServicePreparer(fabricName, protectionContainerName, replicationProtectedItemName, updateMobilityServiceRequest, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UpdateMobilityService", nil, "Failure preparing request")
			return
		}

		resp, err := client.UpdateMobilityServiceSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UpdateMobilityService", resp, "Failure sending request")
			return
		}

		result, err = client.UpdateMobilityServiceResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "recoveryservicessiterecovery.ReplicationProtectedItemsClient", "UpdateMobilityService", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// UpdateMobilityServicePreparer prepares the UpdateMobilityService request.
func (client ReplicationProtectedItemsClient) UpdateMobilityServicePreparer(fabricName string, protectionContainerName string, replicationProtectedItemName string, updateMobilityServiceRequest UpdateMobilityServiceRequest, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":                   autorest.Encode("path", fabricName),
		"protectionContainerName":      autorest.Encode("path", protectionContainerName),
		"replicationProtectedItemName": autorest.Encode("path", replicationProtectedItemName),
		"resourceGroupName":            autorest.Encode("path", client.ResourceGroupName),
		"resourceName":                 autorest.Encode("path", client.ResourceName),
		"subscriptionId":               autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/replicationProtectionContainers/{protectionContainerName}/replicationProtectedItems/{replicationProtectedItemName}/updateMobilityService", pathParameters),
		autorest.WithJSON(updateMobilityServiceRequest),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// UpdateMobilityServiceSender sends the UpdateMobilityService request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationProtectedItemsClient) UpdateMobilityServiceSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// UpdateMobilityServiceResponder handles the response to the UpdateMobilityService request. The method always
// closes the http.Response Body.
func (client ReplicationProtectedItemsClient) UpdateMobilityServiceResponder(resp *http.Response) (result ReplicationProtectedItem, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}