Replace usage of `cache.ClientCache` type with interface with similar
signature. This will further allow overloading clients without affecting the
logic of dependent packages.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
On the `Deposit` events add gas balance check.
Make transfer only if the balance is greater
than the `GasTransferThreshold` that is defined
with environmental variable.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Because options are not used when client is already in cache
providing them to shared cache is misleading at best.
In the worst case `dial_timeout` is set randomly (because of race
condition) which can lead to one service having `dial_timeout` of
another. Thus we set default client creation options when cache is
created.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Previously UN-LOCODE attribute was required for each network map candidate.
In the absence of this attribute, the candidate was not allowed into the
network map. After revising the requirements for candidates, it was decided
not to require the mandatory installation of the attribute by candidates.
From now inner ring does not modify location attributes of the network map
candidate in the absence of UN-LOCODE attribute and does not block entry
into the network map for this criterion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
NeoFS contract can be deployed in sidechain instead of main chain.
Add `without_mainnet` config flag that can switch IR node to work with
sidechain only. By default this flag is unset.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation IR worked with exactly 7 alphabetic contracts
only. Actually number of contracts is limited to only the Glagolitic
alphabet.
Make IR to work with any valid number of alphabetic contracts. Change parser
of alphabetic contract addresses to read amount of processing contracts
before performance. Make Alphabet processor to use interface of the
alphabetic contract group. Use `alphabetContracts` type in IR `Server`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `alphabetContracts` type that map glagolic letters to smart contract
addresses. Implement constructor and all methods which are going to be used
in IR processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `glagolicLetter` enumeration of the Glagolitsa alphabet letters.
Implement `configString` method that returns config-compatible string format
of the letters.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to specify that IR indices are 32 bits in size.
Change return types of `Indexer` interface methods in audit and alphabet
packages. Support interface changes in `Server` implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All node info attribute transformations can't guarantee
the order of attributes. However it should be consistent
otherwise smart-contract won't be able to collect signatures
and approve transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Node info validator may change node attributes, e.g. update
it with human-readable location attributes based on LOCODE.
So inner ring node should provide new node info binary to
smart contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Inner ring Server does not modify LOCODE database (Put method), thus it is
better to open it in RO mode.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement DB interface required by LOCODE validator on new wrapper over the
LOCODE Bolt DB (Record on new wrapper over LOCODE Bolt DB entries).
Construct LOCODE validator and pass it to Netmap processor's constructor as
NodeValidator parameter.
Thus, candidates for a network map must set LOCODE attribute for which there
is an entry in the NeoFS location database.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Keep list of functions which are called first when the server starts (method
Server.Start). If any of the starters returns an error, the server will not
start. Such starters will mainly be used for resources that need to be
initialized after a successful server construction, but before its main work
(e.g. local files).
Keep list of functions which are called when the server stops (Server.Stop
method). Such closers will mainly be used for resources that need to be
released after server shutdown (e.g. initialized by starters).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define a structure for dealing with the geographic location of nodes.
Implement VerifyAndUpdate (with the same purpose as NodeValidator interface)
that checks LOCODE attribute and fills other attributes of the location.
Technically the entity is a wrapper over the NeoFS location database: it
maps the node LOCODE to the database record from which the new attributes
are generated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define NodeValidator interface of the entity that checks and finalizes
NodeInfo structure. Add NodeValidator to Netmap processor. Pass NodeInfo
structures of network map candidates to NodeValidator in order to verify it
and prepare to final state required by network.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Check if `new(big.Int)` will be efficient later and replace
all `big.NewInt()` in code or leave it as it is.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
TxTable used twice in context to transfer assets to
and from banking account. There is no need to store
instance of table persistently.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Some transfers from container owners into bank account may
fail due to lack of assets, so we have to deal with remaining
amount of assets in banking account.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Basic settlement context is a main structure that
implement logic of basic settlement phases: collecting
assets from container owners and then distributing them
to storage nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There are two notifications:
- start estimation notification produced at the beginning of the
epoch,
- stop estimation notifications should be produced before
basic audit settlement starts.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This small refactoring adds `blocktimer.go` file with
all timer related function and constructors. This way
we can create all timers in one place (at the end of
innerring.Server constructor).
To do that we had to move timer reset into global
server state so it can be accessed by netmap
processor.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There is no point of making separate `Fee` and `NoFee`
wrappers because all reading operations are free disregarding
of fee value in static client. However we can use these same
wrappers so send transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Pass handler of audit settlement event to netmap event processor. Generate
AuditEvent in during new epoch processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define a processor of events related to monetary transactions. Define
audit-related event. Provide an interface for processing the audit payout
event.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use client with extraFee instead of readOnlyFee. Rename
NewNoFeeBalanceClient to NewBalanceClient since no-fee client is no longer
used.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not pass zero transfers from the calculation table to Exchanger. Revert
transfers with negative amount since Exchanger interface requires positive
amounts of funds.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Move control of the minimum cost of payment for the audit from the
implementation of the Exchanger to the place where the amount is calculated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Calculate payments to storage nodes for the passed audit when changing the
epoch. The calculation results are wrapped in a call to the Balance contract
(one transaction per user-to-user transfer).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement component that analyzes audit results and generates transactions
for payment of awards for successfully passed audit. When calculating the
total fee, the declared price of the node (attribute) and the total volume
of storage groups, which were successfully audited by the container, are
taken into account. In one call the calculator processes all audit results
for the previous epoch (relative to the calculated parameter).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation handler was not called more the one time after
Reset. It was caused by tick counter not being reset inside Reset method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Listen to new blocks from mainnet until the required fix in neo-go lib is
released (https://github.com/nspcc-dev/neo-go/pull/1687).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call handler of the fractional block interval once between base interval
ticks by default. Add option to call handler of fractional block interval
multiple times (N times if fractional interval == BASE_INTERVAL / N).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Pivot used to shuffle nodes in the CRUSH tree. This is
required argument. We use container ID value to select
container nodes, so `nil` value produces incorrect placements.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Netmap snapshot table caches bootstrap `AddPeer` txs so inner ring
node does not produce redundant approval txs for bootstrapped nodes.
However if node updates states to `Offline`, then such node should
be flagged in snapshot table, so re-bootstrap will actually produce
approval tx.
`ev.PublicKey.String()` returns uncompressed representation of the
node's public key, while snapshot contains compressed values.
Therefore the node was not flagged and re-bootstrap tx was not
approved by inner ring nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
We can't use enum values from SDK library directly, they can be
different from API specification. Therefore we need to convert them
into protocol level format.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Audit task manager should not discard tasks if all workers are
busy, therefore pools should not be non-blocking.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add numeric return from TaskManager.Reset method that shows the number of
canceled tasks. This values will be used for assessment of the progress of
the audit.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define interface of the container communicator which methods are going to be
used in audit checks. Make innerring Server to implement this interface.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement Reset method on audit task manager that cleans task queue.
Extended TaskManager interface with Reset method on IR side. Call Reset
method in audit processor before new audit start.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
