In previous implementation NeoFS CLI app used `network.Address.HostAddr`
as a server URI, which caused scheme loss since host address doesn't
contain it.
Rename `HostAddr` to `URIAddr` and make it to return URI address with
`grpcs` scheme if TLS is enabled. Make `TLSEnabled` unexported since it
was used to provide default `tls.Config` only (it is used by default in
SDK).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Morph "NewEpoch" event handling was registered in a closure over
`addNewEpochNotificationHandler` func. That may lead to the data race:
if a shard was initialized before the event registration, everything works
as planned, but if registration was made earlier, it was not able to
include GC handlers since a shard has not called `eventChanInit` yet and,
therefore, it has not registered handler yet.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In previous implementation `Container.Delete` operation caused local
node's cache invalidation (container itself, eACL and listings). Any
subsequent `Container.Get` operation reversed invalidation. Given the
low latency sensitivity of deleting a container, there is no need to
touch the cache. With this approach, all pending deletion operations on
the node via the NeoFS API protocol will be delayed by the cache TTL.
Do not call cache invalidation ops in `morphContainerWriter.Delete`.
Remove no longer needed `InvalidateContainerListByCID` and
`InvalidateContainer` methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add worker pool to the listener to prevent blocking. It is used only for
notary notifications and new block events handling since it uses RPC
calls. That may lead to the deadlock state: neo-go cannot send RPC until
notification channel is read but notification channel cannot be read since
neo-go client cannot send RPC.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Updated client now supports subscription to chain notifications and RPC
switch between provided RPC endpoints.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Provide explicit argument to `sendCommitteeTx` signifying whether a tx
should try to use group signer.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
NEP-17 transfer method returns boolean value signifying if the operation
was successful. Fail the transaction if it was not.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Check the full file name instead of just prefix. Also, fix a bug where
a single missing wallet could lead to an incorrect size calculation.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
`Degraded` mode is set automatically after error counter is over the
threshold. `ReadOnly` mode can still be set by an administrator.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Move in-memory session storage to the separate directory of `storage`. It is
done for future support of different kind of session storages.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The buffer size value is somewhat arbitrary and making in configurable
doesn't make much sense, given that we can't really restrict total resource
consumption in other places. `Copy` uses 32 KiB buffer by default, which
is not big. This approach is also more flexible as we can get rid of
buffer completely by implementing `ReaderFrom`, `WriterTo` interfaces.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
GracefulStop() may be blocked until all server-side streams
are finished. There is no control over such streams yet, so
application may be frozen in shutdown stage.
Naive solution is to add timeout for GracefulStop(). At this
point healthy connection will be finished and unhealthy
connections will be terminated by Stop().
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Wrap engine with notifications writer (if configured so) to allow sending
notifications right after the object is saved in the local storage.
"Hot" notifications are sent for objects with the following tick epoch
values:
1. 0;
2. *current epoch*.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make all epoch independent in reputation process. Do not reset any timers
related to reputation. Make it possible to finish iteration after the
unexpected `NewEpoch` event.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Implement `lock` command and add it to `object` section. The command
accepts container argument (string `cid.ID`) and list of locked objects
(string `oid.ID` list). From the provided input `LOCK` object is
constructed and stored using NeoFS API protocol.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `FormatValidator.ValidateContent` to verify payload of `LOCK`
objects. Pass locked objects to `Locker` interface. Require from
`Locker.Lock` to return `apistatus.IrregularObjectLock` error on a
corresponding condition.
Also add error return to `DeleteHandler.DeleteObjects` method. Require
from method to return `apistatus.ObjectLocked` error on a corresponding
condition. Adopt implementations.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to switch between object types since `Type` implements
`fmt.Stringer`.
Replace swich-case in `printHeader` with `%s` format notation function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make all operations that related to `neofs-api-go` library be placed in `v2`
packages. They parse all v2-versioned structs info `neofs-sdk-go`
abstractions and pass them to the corresponding `acl`/`eacl` packages. `v2`
packages are the only packages that do import `neofs-api-go` library. `eacl`
and `acl` provide public functions that only accepts `sdk` structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Remove `Object` and `RawObject` types from `pkg/core/object` package.
Use `Object` type from NeoFS SDK Go library everywhere. Avoid using the
deprecated elements.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
It was broken since `initConfig` was made before every execution of the
command and flags have not been read by cobra yet, so it was impossible to
print config file path if `verbose` flag was set in command line not in
config file.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After recent changes balance response contains contract precision.
Convert balance response to Fixed8. Use `fixedn.ToString` function to
print the converted value.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Currently have static priority of what key is used irregardless of
whether a flag was provided via CLI or in config. This makes it
impossible to override some of the config settings. While we could try
to check if the key is provided by CLI by binding CLI flag under to
viper under a different name the same problem would occur for config/environment
variables. Fixing all of this with current set of keys is too complicate.
In this commit we revert changes from #610 and use a single flag for all types of keys.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
- Update `neofs-sdk-go`:
v0.0.0-20211230072947-1fe37df88f80 => v0.0.0-20220113123743-7f3162110659
- Add client interface that duplicates SDK's client behaviour and new
`MultiAddressClient` interface that has method that iterates over wrapped
clients.
- Also start using simple client mode that does not require parsing statuses
outside the SDK library.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
For some data compression makes little sense, as it is already compressed.
This commit allows to leave such data unchanged based on `Content-Type`
attribute. Currently exact, prefix and suffix matching are supported.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
It is much more convenient to skip source creation.
Also fix some bugs:
1. `cryptoSource.Int63()` now returns number in [0, 1<<63) as required
by `rand.Source` interface.
2. Replace `cryptoSource.Uint63()` with `cryptoSource.Uint64` to allow
generate uint64 numbers directly (see rand.Source64 docs).
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In previous implementation ACL server was the 1st (except metric server
in some cases) server in pipeline of Object service servers. This led to
the fact that errors of this handler could not be reduced to status
responses.
Nest object ACL server into signature and response servers to support
common response format.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The updated version of the `NNS` contract now supports the third `data`
argument that may provide additional information.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In notary disabled environment, approval of container creation with nice
name attribute takes much more additional GAS than other operations
(due to NNS invocation).
Morph library changes:
* add the ability to specify per-op fees using `StaticClient` options;
* add the ability to customize fee for `Put` operation with named
container in container morph client.
Inner Ring changes:
* add `fee.named_container_register` config value which specifies
additional GAS fee for the approvals of the named container
registrations;
* pass the config value to `WithCustomFeeForNamedPut` option of
container morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
We have `subnet` contract in list, but it isn't currently deployed.
This commit skips missing NNS entries to handle such situation. In
future we may optimize this to be done in 1 round-trip.
As a nice side-effect, dump-hashes for notary-enabled environment works
even if notary is disabled -- it just prints zero hash for proxy
contract.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Only `subnet create` command can generate notary requests.
Remove global `non-notary` flag. Add `notary` flag to `create` cmd.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Cobra commands don't call `PreRun` functions on parent by default. We
need to do it in `subnet` command of admin utility in order to inherit
viper bindings.
Add `inheritPreRun` function which makes sub-commands to call `PreRun`
functions before its own `PreRun`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use persistent flags on parent command in order to inherit flags in
sub-commands. Turn on notary mode of morph client in `subnet` command of
admin utility for notary environments.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `deployContracts` method to call `nnsRegisterDomain` in order to
register NNS domain for deployed contracts.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `nnsResolveHash` function to return declared error on `token not
found` fault exception. Catch this error in `deployContracts` method,
and switch to deployment if updating contract is missing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `subnet` command which contains all subnet-related commands. Add
sub-commands:
* `create` for creation;
* `remove` for removal;
* `get` for reading;
* `admin` for admin management;
* `client` for client management.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `subnet` sub-section to `node` section of storage node config. Add
`entries` value which allows to enumerate subnets for entrance. Add
`exit_zero` value which allows to not enter zero subnet.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define notification events, implement parsers. Add morph client of
Subnet contract. Listen, verify and approve events in Inner Ring app.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Upgrade NeoFS API Go library to version with status returns. Make all API
clients to pull out and return errors from failed statuses. Make signature
service to respond with status if client version supports it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add hash of the TX that generated notification
to neofs/netmap event structures. Adapt all
neofs/netmap wrapper calls to new structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Rounding is done using the suffix boundary (i.e. floating point value
with `gb` suffix will return size which is an integer number of
megabytes).
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Relay storage node doesn't exec local object operations, so it doesn't need
shard configuration.
Add `required` bool parameter to `engineconfig.IterateShards`. Make it to
panic if it is `true`, and immediately return otherwise. Pass `false` if
node is configured as relay in app (it also prevents panic).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to block execution of local object storage operations if
node is put into maintenance mode (resume if the node is taken out of
maintenance mode).
Call `BlockExecution` method if `ControlService.SetNetmapStatus` was called
with `MAINTENANCE` status. Call `ResumeExecution` if it was called with
another status.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Accept `maintenance` netmap status in `control set-status` command and
resolve it to `control.NetmapStatus_MAINTENANCE` value.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All objects in NeoFS must have owner ID. In previous implementation Object
Delete service handler set owner ID from request session token. If removal
was executed w/o a session, object with tombstone was prepared incorrectly.
In order to fix this node should set its own ID and become an owner of the
tombstone object.
Extend `NetworkInfo` interface required by Object.Delete handler with
`LocalNodeID` method which returns `owner.ID` of the local node. Implement
the method on `networkState` component of storage node application which is
updated on each node state change in NeoFS network map. Set owner returned
by `LocalNodeID` call as tombstone object's owner in Delete handler.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The client needs of the Reputation service are limited and change not often.
Interface changes of the client library should not affect the operation of
various service packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the Reputation service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The client needs of the CLI application are limited and change not often.
Interface changes of the client library should not affect the operation of
various application packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the CLI application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
CLI `util locode info` command does not write operations. Opening a
`locodebolt.DB` instance in RW mode is redundant.
Provide `locodebolt.ReadOnly()` option to `locodebolt.DB` constructor in
order to create READ flock over BoltDB file.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Assume contracts path is tar.gz archive if it is not a directory.
In theory we could support raw tar but it has little value as our
distribution format is tar.gz and this is the primary use-case for this
feature (download and use).
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In case we have multiple sections with similar structure (e.g. shards)
having defaults in a single place is easier to work with.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
There is no point to pass key storage in parameters because
it can be defined on the service level of application.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
```
> source config/example/node.env
config/example/node.env: строка 14: /dns4/s02.neofs.devenv/tcp/8081: Нет такого файла или каталога
config/example/node.env: строка 16: MSK: команда не найдена
config/example/node.env: строка 35: 028f42cfcb74499d7b15b35d9bff260a1c8d27de4f446a627406a382d8961486d6: команда не найдена
config/example/node.env: строка 48: https://rpc2.morph.fs.neo.org:40341: Нет такого файла или каталога
config/example/node.env: строка 49: wss://rpc2.morph.fs.neo.org:40341/ws: Нет такого файла или каталога
config/example/node.env: строка 53: https://rpc2.n3.nspcc.ru:30341: Нет такого файла или каталога
```
New implementation is still basic, but we don't need to parse any env
file, just have a correct example.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Note that we cannot mark `--rpc-endpoint` flag as required because
it can be taken from config.
Before:
```
Error: can't create N3 client: failed to get network magic: Post "": unsupported protocol scheme ""
```
Now:
```
Error: can't create N3 client: missing endpoint
```
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
```
Error: can't to initialize context: can't read alphabet wallets dir: open : no such file or directory
```
It needs neither contracts nor wallets, just N3 client.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Make the implementation of network info source (Netmap V2 service
dependency) to read MillisecondsPerBlock sidechain parameter and NeoFS
network parameters depending on the client version.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
SN tries to keep 1:3 proportion of GAS and
notary balances respectively. If that proportion
has been messed(means that notary balance is
lower than required) it sends half of its
GAS balance to the notary service.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After storage engine started to limit number of PUT operations there is no
need to limited worker pool in Object Put service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `shard_pool_size` config to `storage` section. Set app default to 20.
Pass the value to `WithShardPoolSize` option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Non-alphabet contract are always deployed from committee
so it makes sense to calculate hashes in one place.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Container contract uses actual NNS interface. This also aleviates some
pain related to update as neofs-adm code itself uses current NNS
version.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Container contract now calls NNS contract to register TLD for nice
names. This must be witnessed by a committee.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not log in options constructors. Also failure to
initialize compression module (possibly due to invalid options) is
certainly an error deserving proper treatment.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Implement `list` command for object listing. Support listing of the objects
from write-cache and blobovnicza.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement skeleton of `neofs-lens` app which is going to be used for working
with storage engine's data.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Also delete `ttl` and `xhdr` flags from
`accounting balance` command and refactor
command initialization.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In previous implementation of reputation client constructor compared network
addresses to check the membership of the network map.
Replace network addresses comparison with public key comparison.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to have the ability to expand the data needed for client
construction.
Replace `network.AddressGroup` parameter of client cache interfaces with
`client.NodeInfo`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Object PUT used single pool of workers for local
and remote ops, but these ops are heterogeneous.
Use remote/local pool for remote/local operations in PUT service. At first
the pools are configured with the same size.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Contract owners are removed in neofs-contract v0.11.0.
Now side chain committee has rights to update contracts.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement `RefillMetabase` method to `shardconfig.Config` type which reads
`refill_metabase` config value. Pass the result to `WithRefillMetabase`
option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `size_limit` config value to write-cache section. Add `SizeLimit` method
of `writecache.Config` type. Pass its value to `WithMaxCacheSize` option on
app construction.
Reflect config update in examples. Cover new value in unit test.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Bootstrap process involves `addPeer` contract
call => it is necessary to make deposit before
booting up.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Create non-notary container wrapper and
use it in load announcing since it shouldn't
be invoked as notary request.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Storage Node needs to have notary deposit
for successful notary request sending.
Add notary deposit on startup(and wait for
its acceptance). Add notary deposit timer,
its config in `morph` section and env vars
for its tuning.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Prepare all listening structures for notary events:
rename(add prefix/suffix 'notification') all
notification specific handlers/parsers.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Some software components regulate the way of working with placement arrays
when a local node enters it. In the previous implementation, the locality
criterion was the correspondence between the announced network address
(group) and the address with which the node was configured. However, by
design, network addresses are not unique identifiers of storage nodes in the
system.
Change comparisons by network addresses to comparisons by keys in all
packages with the logic described above. Implement `netmap.AnnouncedKeys`
interface on `cfg` type in the storage node application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Since morph `Client` works in multi-client mode, there is an error case when
we can not get network magic when all endpoints are unavailable.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to work with a set of Neo RPC nodes in order not to depend
on the failure of some nodes while others are active.
Support "multi-client" mode of morph `Client` entity. If instance is not
"multi-client", it works as before. Constructor `New` creates multi-client,
and each method performs iterating over the fixed set of endpoints until
success. Opened client connections are cached (without eviction for now).
Storage (as earlier) and IR (from now) nodes can be configured with multiple
Neo endpoints. As above, `New` creates multi-client instance, so we don't
need initialization changes on app-side.
`Wait` and `GetDesignateHash` methods of `Client` return an error from now
to detect connection errors. `NotaryEnabled` method is removed as unused.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Container service handlers didn't cache the
results of `Get` / `GetEACL` / `List` operations. As a consequence of this,
high load on the service caused neo-go client's connection errors. To avoid
this there is a need to use cache. Object service already uses `Get` and
`GetEACL` caches.
Implement cache of `List` results. Share already implemented cache of Object
service with the Container one. Provide new instance of read-only container
storage (defined as an interface)to morph executor's constructor on which
container service is based. Write operations remained unchanged.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Storage node should not try to register itself in network in relay mode.
Implement `needBootstrap` method which checks if node need to bootstrap.
Call `bootstrap` method in `bootstrapNode` function only on true return.
Skip re-bootstrap logic in new epoch event handler on false return.
Return an error if `ControlService.SetNetmapStatus` is called on relay
node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`reBootstrapEnabled` state var is not used. It is going to be used to decide
whether to bootstrap node or not.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `refill-gas` sub-command to `morph` command which provides the ability
to refill storage node's GAS.
Command performs some actions from `generate-storage-wallet` runner, so
common code is moved to a separate function `refillGas`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`--container-contract` flag must be used for deployments without NNS.
Our current testnet sidechain is like this, for example.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
`morph dump-containers` will dump all containers from the
contaner contract. JSON format is chosen to allow manual intervention.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not init caches for eACL, containers and netmap
if `disable_cache` config options is `true`, use
direct RPC calls instead.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Initial GAS can be provided both in config and as a CLI argument.
Generating wallet with 0 GAS is currently prohibited.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
If `init` is run on a dirty network (i.e. with some stages already
done), no transactions are really sent so clean up logs a bit.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Depending on having notary contract in sidechain get
IR list either from NeoFSAlphabet role either from
netmap contract.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Some users want to specify only wallet section in the SN. It is not
possible if `Key` throws panic on empty value. Instead it should
fallback to wallet section. Panic is suitable if node's key is provided
but invalid.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add `errf`, `exitOnErr` and `exitOnErrCode` functions
that works with errors and exits with non-zero exit
codes on non-nil errors.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Extended ACL input can have version later than CLI one, and it should not be
downgraded. But the version should be still adequate.
Set `pkg.SDKVersion` on false return of `version.IsValid`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Changes:
* replace `iotuil` elements with the ones from `os` package;
* replace `os.Filemode` with `fs.FileMode`;
* use `signal.NotifyContext` instead of `NewGracefulContext` (removed).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to support multiple network addresses of the storage nodes.
Make `BootstrapAddress` to return `network.AddressGroup` (and rename).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Generalize single gRPC interface of the storage node to a group of
interfaces. Each interface calls the same RPC handler.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation if Control listen endpoint was omitted in config
the gRPC listening endpoint was used instead.
Consider empty address as an option to disable the service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to support multiple server endpoints for reputation and
container transmission.
Replace `ServerInfo.Address` getter with `ServerInfo.IterateAddresses`
iterator.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Head service to work with `AddressGroup` instead of `Address`
in order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Search service to work with `AddressGroup` instead of `Address`
in order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Get service to work with `AddressGroup` instead of `Address` in
order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Put service to work with `AddressGroup` instead of `Address` in
order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `LocalAddressSource.LocalAddress` method to return `AddressGroup`. Make
`IsLocalAddress` function to accept parameter of type `AddressGroup`. Adopt
the application code with temporary `GroupFromAddress` helper.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Change type of the `ClientCache.Get` method's parameter to `AddressGroup`.
Use `GroupFromAddress` to call the method from the wrappers in order to no
change their interface.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add group-address `Client` implementation. Return instances of this
implementation from `ClientCache.Get` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to generalize single-address client to group-address client.
To do this, we can re-implement `Client` interface from NeoFS API Go library
and still use it in the application code. There is a problem with method
`Raw` which must return single-address raw client. So as not to make changes
to API library we need to overload Client interface in order to support
`Raw` method in group-address client implementation.
Define `Client` interface in new `pkg/core/client` package. Completely
inherit API `Client` interface. Add `RawForAddress` method to build raw
client for the single node address. Adopt the application code that used Raw
method to work with new `Client`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Obtain key once in every cobra command to
pass it to `getOwnerID` and `initSession`
and do not ask to enter password more than
one time in `put` and `putSG` operations.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Change usage function to `Run`(does not return
err). Log errors with `cmd.PrintErrln`. Change
all `fmt.Print*` to `cmd.Print*`.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`network.Address` structure in most cases created once and used read-only.
Replace `AddressFromString` function with `Address.FromString` method with
the same purpose and implementation. Make all libraries to work with value.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Address.WriteToNodeInfo` method which sets address of `NodeInfo`
structure. Use it in storage node application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Return tyype is clear from the method's signature and docs, there is no
point in reflecting it in the name.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Panic if internal `manet.DialArgs` call returns error since this is
unexpected according to `AddressFromString` implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Serve `ControlService` instance on configured endpoint (do not serve if not
specified). Read allowed keys from config.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Also use neo-go private key wrapper where possible, as it
already has methods for (un)marshaling.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Config `NodeInfo` should be used for bootstrap. Separete local node info and
netmap one. Return configured `NodeInfo` if structure from netmap is
missing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In testnet and neofs-dev-env we use timers with these
settings and they are looking good. So it makes sense
to make them default.
Storage node now can't configure bootstrap healthcheck
length and can't disable it. Inner ring default values
now adopt these changes too.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
New config package in storage node does not use
application prefix from misc package. Therefore
inner ring node can define prefix in local scope.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Container commands in NeoFS CLI can use signed session token
to create, delete container and change extended ACL table.
This token should be signed the same way we sign bearer tokens.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
containerSessionToken() actually parses any session token.
We can reuse this function to resign session token when it
takes filepath as an argument, instead of public variable.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
