aarifullin/neoneo-go
1
0
Fork 0
forked from TrueCloudLab/neoneo-go
Code Pull requests Activity

Merge pull request #2827 from nspcc-dev/multiaddr

Browse source 
network: support multiple bind addresses
This commit is contained in:
Roman Khimov 2022-12-07 17:15:56 +07:00 committed by GitHub
commit 90a85259a8
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
50 changed files with 1301 additions and 541 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

33
ROADMAP.md
View file

@ -102,3 +102,36 @@ startup to inform about this, it's very easy to deal with this configuration
change, just replace one line.
Removal of SecondsPerBlock is scheduled for May-June 2023 (~0.103.0 release).
## Services/node address and port configuration
Version 0.100.0 of NeoGo introduces a multiple binding addresses capability to
the node's services (RPC server, TLS RPC configuration, Prometheus, Pprof) and
the node itself. It allows to specify several listen addresses/ports using an
array of "address:port" pairs in the service's `Addresses` config section and
array of "address:port:announcedPort" tuples in the `ApplicationConfiguration`'s
`Addresses` node config section. Deprecated `Address` and `Port` sections of
`RPC`, `Prometheus`, `Pprof` subsections of the `ApplicationConfiguration`
as far as the one of RPC server's `TLSConfig` are still available, but will be
removed, so please convert your node configuration file to use new `P2P`-level
`Addresses` section for the node services. Deprecated `Address`, `NodePort` and
`AnnouncedPort` sections of `ApplicationConfiguration` will also be removed
eventually, so please update your node configuration file to use `Addresses`
section for the P2P addresses configuration.
Removal of these config sections is scheduled for May-June 2023 (~0.103.0 release).
## P2P application settings configuration
Version 0.100.0 of NeoGo marks the following P2P application settings as
deprecated: `AttemptConnPeers`, `BroadcastFactor`, `DialTimeout`,
`ExtensiblePoolSize`, `MaxPeers`, `MinPeers`, `PingInterval`, `PingTimeout`,
`ProtoTickInterval`. These settings are moved to a separate `P2P` section of
`ApplicationConfiguration`. The `DialTimeout`, `PingInterval`, `PingTimeout`,
`ProtoTickInterval` settings are converted to more precise `Duration` format
(allowing for subsecond time). Please, update your node configuration (all you
need is to move specified settings under the `P2P` section and convert
time-related settings to `Duration` format).
Removal of deprecated P2P related application settings is scheduled for May-June
2023 (~0.103.0 release).

44
cli/nep_test/nep11_test.go
View file

@ -47,7 +47,7 @@ func TestNEP11Import(t *testing.T) {
args := []string{
"neo-go", "wallet", "nep11", "import",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", walletPath,
}
// missing token hash
@ -123,7 +123,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// transfer funds to contract owner
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--to", nftOwnerAddr,
"--token", "GAS",
@ -139,7 +139,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// mint 1 HASHY token by transferring 10 GAS to HASHY contract
e.In.WriteString(nftOwnerPass + "\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wall,
"--to", h.StringLE(),
"--token", "GAS",
@ -166,7 +166,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// check the balance
cmdCheckBalance := []string{"neo-go", "wallet", "nep11", "balance",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--address", nftOwnerAddr}
checkBalanceResult := func(t *testing.T, acc string, ids ...[]byte) {
@ -201,7 +201,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// import token
e.Run(t, "neo-go", "wallet", "nep11", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wall,
"--token", h.StringLE())
@ -211,7 +211,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// balance check: all accounts
e.Run(t, "neo-go", "wallet", "nep11", "balance",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wall,
"--token", h.StringLE())
checkBalanceResult(t, nftOwnerAddr, tokenID)
@ -223,7 +223,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// ownerOf: missing contract hash
cmdOwnerOf := []string{"neo-go", "wallet", "nep11", "ownerOf",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdOwnerOf...)
cmdOwnerOf = append(cmdOwnerOf, "--token", h.StringLE())
@ -238,7 +238,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// tokensOf: missing contract hash
cmdTokensOf := []string{"neo-go", "wallet", "nep11", "tokensOf",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdTokensOf...)
cmdTokensOf = append(cmdTokensOf, "--token", h.StringLE())
@ -254,7 +254,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// properties: no contract
cmdProperties := []string{
"neo-go", "wallet", "nep11", "properties",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdProperties...)
cmdProperties = append(cmdProperties, "--token", h.StringLE())
@ -280,7 +280,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// tokens: missing contract hash
cmdTokens := []string{"neo-go", "wallet", "nep11", "tokens",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdTokens...)
cmdTokens = append(cmdTokens, "--token", h.StringLE())
@ -298,7 +298,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
cmdTransfer := []string{
"neo-go", "wallet", "nep11", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--to", testcli.ValidatorAddr,
"--from", nftOwnerAddr,
@ -328,7 +328,7 @@ func TestNEP11_ND_OwnerOf_BalanceOf_Transfer(t *testing.T) {
verifyH := deployVerifyContract(t, e)
cmdTransfer = []string{
"neo-go", "wallet", "nep11", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--to", verifyH.StringLE(),
"--from", nftOwnerAddr,
@ -398,7 +398,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// mint 1.00 NFSO token by transferring 10 GAS to NFSO contract
e.In.WriteString(testcli.ValidatorPass + "\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wall,
"--to", h.StringLE(),
"--token", "GAS",
@ -432,7 +432,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// check properties
e.Run(t, "neo-go", "wallet", "nep11", "properties",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--token", h.StringLE(),
"--id", hex.EncodeToString(token1ID))
jProps := e.GetNextLine(t)
@ -449,7 +449,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// check the balance
cmdCheckBalance := []string{"neo-go", "wallet", "nep11", "balance",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--address", testcli.ValidatorAddr}
checkBalanceResult := func(t *testing.T, acc string, objs ...idAmount) {
@ -481,7 +481,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// import token
e.Run(t, "neo-go", "wallet", "nep11", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wall,
"--token", h.StringLE())
@ -500,7 +500,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// ownerOfD: missing contract hash
cmdOwnerOf := []string{"neo-go", "wallet", "nep11", "ownerOfD",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdOwnerOf...)
cmdOwnerOf = append(cmdOwnerOf, "--token", h.StringLE())
@ -515,7 +515,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// tokensOf: missing contract hash
cmdTokensOf := []string{"neo-go", "wallet", "nep11", "tokensOf",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdTokensOf...)
cmdTokensOf = append(cmdTokensOf, "--token", h.StringLE())
@ -533,7 +533,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// properties: no contract
cmdProperties := []string{
"neo-go", "wallet", "nep11", "properties",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdProperties...)
cmdProperties = append(cmdProperties, "--token", h.StringLE())
@ -566,7 +566,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
// tokens: missing contract hash
cmdTokens := []string{"neo-go", "wallet", "nep11", "tokens",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
}
e.RunWithError(t, cmdTokens...)
cmdTokens = append(cmdTokens, "--token", h.StringLE())
@ -582,7 +582,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
cmdTransfer := []string{
"neo-go", "wallet", "nep11", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--to", nftOwnerAddr,
"--from", testcli.ValidatorAddr,
@ -612,7 +612,7 @@ func TestNEP11_D_OwnerOf_BalanceOf_Transfer(t *testing.T) {
verifyH := deployVerifyContract(t, e)
cmdTransfer = []string{
"neo-go", "wallet", "nep11", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", wall,
"--to", verifyH.StringLE(),
"--from", testcli.ValidatorAddr,

22
cli/nep_test/nep17_test.go
View file

@ -21,7 +21,7 @@ func TestNEP17Balance(t *testing.T) {
e := testcli.NewExecutor(t, true)
cmdbalance := []string{"neo-go", "wallet", "nep17", "balance"}
cmdbase := append(cmdbalance,
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
)
cmd := append(cmdbase, "--address", testcli.ValidatorAddr)
@ -122,7 +122,7 @@ func TestNEP17Transfer(t *testing.T) {
e := testcli.NewExecutor(t, true)
args := []string{
"neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--to", w.Accounts[0].Address,
"--token", "NEO",
@ -182,7 +182,7 @@ func TestNEP17Transfer(t *testing.T) {
t.Run("default address", func(t *testing.T) {
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -208,7 +208,7 @@ func TestNEP17Transfer(t *testing.T) {
t.Run("with signers", func(t *testing.T) {
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -221,7 +221,7 @@ func TestNEP17Transfer(t *testing.T) {
validTil := e.Chain.BlockHeight() + 100
cmd := []string{
"neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--to", address.Uint160ToString(e.Chain.GetNotaryContractScriptHash()),
"--token", "GAS",
@ -262,7 +262,7 @@ func TestNEP17MultiTransfer(t *testing.T) {
require.NoError(t, err)
args := []string{
"neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -318,26 +318,26 @@ func TestNEP17ImportToken(t *testing.T) {
// missing token hash
e.RunWithError(t, "neo-go", "wallet", "nep17", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath)
// additional parameter
e.RunWithError(t, "neo-go", "wallet", "nep17", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath,
"--token", gasContractHash.StringLE(), "useless")
e.Run(t, "neo-go", "wallet", "nep17", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath,
"--token", gasContractHash.StringLE())
e.Run(t, "neo-go", "wallet", "nep17", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath,
"--token", address.Uint160ToString(neoContractHash)) // try address instead of sh
// not a NEP-17 token
e.RunWithError(t, "neo-go", "wallet", "nep17", "import",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath,
"--token", nnsContractHash.StringLE())

2
cli/options/cli_options_test.go
View file

@ -24,7 +24,7 @@ func TestGetRPCClient(t *testing.T) {
t.Run("success", func(t *testing.T) {
set := flag.NewFlagSet("flagSet", flag.ExitOnError)
set.String(options.RPCEndpointFlag, "http://"+e.RPC.Addr, "")
set.String(options.RPCEndpointFlag, "http://"+e.RPC.Addresses()[0], "")
ctx := cli.NewContext(app.New(), set, nil)
gctx, _ := options.GetTimeoutContext(ctx)
_, ec := options.GetRPCClient(gctx, ctx)

8
cli/query/query_test.go
View file

@ -30,7 +30,7 @@ func TestQueryTx(t *testing.T) {
transferArgs := []string{
"neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--to", w.Accounts[0].Address,
"--token", "NEO",
@ -47,7 +47,7 @@ func TestQueryTx(t *testing.T) {
tx, ok := e.Chain.GetMemPool().TryGetValue(txHash)
require.True(t, ok)
args := []string{"neo-go", "query", "tx", "--rpc-endpoint", "http://" + e.RPC.Addr}
args := []string{"neo-go", "query", "tx", "--rpc-endpoint", "http://" + e.RPC.Addresses()[0]}
e.Run(t, append(args, txHash.StringLE())...)
e.CheckNextLine(t, `Hash:\s+`+txHash.StringLE())
e.CheckNextLine(t, `OnChain:\s+false`)
@ -74,7 +74,7 @@ func TestQueryTx(t *testing.T) {
t.Run("FAULT", func(t *testing.T) {
e.In.WriteString("one\r")
e.Run(t, "neo-go", "contract", "invokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", testcli.ValidatorAddr,
"--force",
@ -144,7 +144,7 @@ func compareQueryTxVerbose(t *testing.T, e *testcli.Executor, tx *transaction.Tr
func TestQueryHeight(t *testing.T) {
e := testcli.NewExecutor(t, true)
args := []string{"neo-go", "query", "height", "--rpc-endpoint", "http://" + e.RPC.Addr}
args := []string{"neo-go", "query", "height", "--rpc-endpoint", "http://" + e.RPC.Addresses()[0]}
e.Run(t, args...)
e.CheckNextLine(t, `^Latest block: [0-9]+$`)
e.CheckNextLine(t, `^Validated state: [0-9]+$`)

41
cli/server/server.go
View file

@ -141,8 +141,14 @@ func initBCWithMetrics(cfg config.Config, log *zap.Logger) (*core.Blockchain, *m
pprof := metrics.NewPprofService(cfg.ApplicationConfiguration.Pprof, log)
go chain.Run()
go prometheus.Start()
go pprof.Start()
err = prometheus.Start()
if err != nil {
return nil, nil, nil, cli.NewExitError(fmt.Errorf("failed to start Prometheus service: %w", err), 1)
}
err = pprof.Start()
if err != nil {
return nil, nil, nil, cli.NewExitError(fmt.Errorf("failed to start Pprof service: %w", err), 1)
}
return chain, prometheus, pprof, nil
}
@ -440,7 +446,10 @@ func startServer(ctx *cli.Context) error {
grace, cancel := context.WithCancel(newGraceContext())
defer cancel()
serverConfig := network.NewServerConfig(cfg)
serverConfig, err := network.NewServerConfig(cfg)
if err != nil {
return cli.NewExitError(err, 1)
}
chain, prometheus, pprof, err := initBCWithMetrics(cfg, log)
if err != nil {
@ -540,10 +549,18 @@ Main:
}
pprof.ShutDown()
pprof = metrics.NewPprofService(cfgnew.ApplicationConfiguration.Pprof, log)
go pprof.Start()
err = pprof.Start()
if err != nil {
shutdownErr = fmt.Errorf("failed to start Pprof service: %w", err)
cancel() // Fatal error, like for RPC server.
}
prometheus.ShutDown()
prometheus = metrics.NewPrometheusService(cfgnew.ApplicationConfiguration.Prometheus, log)
go prometheus.Start()
err = prometheus.Start()
if err != nil {
shutdownErr = fmt.Errorf("failed to start Prometheus service: %w", err)
cancel() // Fatal error, like for RPC server.
}
case sigusr1:
if oracleSrv != nil {
serv.DelService(oracleSrv)
@ -621,15 +638,15 @@ Main:
// In case global Address (of the node) provided and RPC/Prometheus/Pprof don't have configured addresses they will
// use global one. So Node and RPC and Prometheus and Pprof will run on one address.
func configureAddresses(cfg *config.ApplicationConfiguration) {
if cfg.Address != "" {
if cfg.RPC.Address == "" {
cfg.RPC.Address = cfg.Address
if cfg.Address != nil && *cfg.Address != "" { //nolint:staticcheck // SA1019: cfg.Address is deprecated
if cfg.RPC.Address == nil || *cfg.RPC.Address == "" { //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
cfg.RPC.Address = cfg.Address //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
}
if cfg.Prometheus.Address == "" {
cfg.Prometheus.Address = cfg.Address
if cfg.Prometheus.Address == nil || *cfg.Prometheus.Address == "" { //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
cfg.Prometheus.Address = cfg.Address //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
}
if cfg.Pprof.Address == "" {
cfg.Pprof.Address = cfg.Address
if cfg.Pprof.Address == nil || *cfg.Pprof.Address == "" { //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
cfg.Pprof.Address = cfg.Address //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
}
}
}

42
cli/server/server_test.go
View file

@ -312,57 +312,61 @@ func TestRestoreDB(t *testing.T) {
require.NoError(t, restoreDB(ctx))
}
// TestConfigureAddresses checks deprecated code compatibility, it should be removed
// along with deprecated `Address` field removal.
func TestConfigureAddresses(t *testing.T) {
defaultAddress := "http://localhost:10333"
customAddress := "http://localhost:10334"
t.Run("default addresses", func(t *testing.T) {
cfg := &config.ApplicationConfiguration{
Address: defaultAddress,
Address: &defaultAddress, //nolint:staticcheck // SA1019: Address is deprecated
}
configureAddresses(cfg)
require.Equal(t, defaultAddress, cfg.RPC.Address)
require.Equal(t, defaultAddress, cfg.Prometheus.Address)
require.Equal(t, defaultAddress, cfg.Pprof.Address)
require.Equal(t, defaultAddress, *cfg.RPC.Address) //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
require.Equal(t, defaultAddress, *cfg.Prometheus.Address) //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
require.Equal(t, defaultAddress, *cfg.Pprof.Address) //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
})
t.Run("custom RPC address", func(t *testing.T) {
cfg := &config.ApplicationConfiguration{
Address: defaultAddress,
Address: &defaultAddress, //nolint:staticcheck // SA1019: Address is deprecated
RPC: config.RPC{
Address: customAddress,
BasicService: config.BasicService{
Address: &customAddress, //nolint:staticcheck // SA1019: Address is deprecated
},
},
}
configureAddresses(cfg)
require.Equal(t, cfg.RPC.Address, customAddress)
require.Equal(t, cfg.Prometheus.Address, defaultAddress)
require.Equal(t, cfg.Pprof.Address, defaultAddress)
require.Equal(t, *cfg.RPC.Address, customAddress) //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
require.Equal(t, *cfg.Prometheus.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
require.Equal(t, *cfg.Pprof.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
})
t.Run("custom Pprof address", func(t *testing.T) {
cfg := &config.ApplicationConfiguration{
Address: defaultAddress,
Address: &defaultAddress, //nolint:staticcheck // SA1019: Address is deprecated
Pprof: config.BasicService{
Address: customAddress,
Address: &customAddress, //nolint:staticcheck // SA1019: Address is deprecated
},
}
configureAddresses(cfg)
require.Equal(t, cfg.RPC.Address, defaultAddress)
require.Equal(t, cfg.Prometheus.Address, defaultAddress)
require.Equal(t, cfg.Pprof.Address, customAddress)
require.Equal(t, *cfg.RPC.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
require.Equal(t, *cfg.Prometheus.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
require.Equal(t, *cfg.Pprof.Address, customAddress) //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
})
t.Run("custom Prometheus address", func(t *testing.T) {
cfg := &config.ApplicationConfiguration{
Address: defaultAddress,
Address: &defaultAddress, //nolint:staticcheck // SA1019: Address is deprecated
Prometheus: config.BasicService{
Address: customAddress,
Address: &customAddress, //nolint:staticcheck // SA1019: Address is deprecated
},
}
configureAddresses(cfg)
require.Equal(t, cfg.RPC.Address, defaultAddress)
require.Equal(t, cfg.Prometheus.Address, customAddress)
require.Equal(t, cfg.Pprof.Address, defaultAddress)
require.Equal(t, *cfg.RPC.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.RPC.Address is deprecated
require.Equal(t, *cfg.Prometheus.Address, customAddress) //nolint:staticcheck // SA1019: cfg.Prometheus.Address is deprecated
require.Equal(t, *cfg.Pprof.Address, defaultAddress) //nolint:staticcheck // SA1019: cfg.Pprof.Address is deprecated
})
}

62
cli/smartcontract/contract_test.go
View file

@ -310,7 +310,7 @@ func TestDeployBigContract(t *testing.T) {
e.In.WriteString(testcli.ValidatorPass + "\r")
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName)
}
@ -333,7 +333,7 @@ func TestContractDeployWithData(t *testing.T) {
e := testcli.NewExecutor(t, true)
cmd := []string{
"neo-go", "contract", "deploy",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName,
"--force",
@ -363,7 +363,7 @@ func TestContractDeployWithData(t *testing.T) {
require.NoError(t, err)
e.Run(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
h.StringLE(),
"getValueWithKey", "key1",
)
@ -375,7 +375,7 @@ func TestContractDeployWithData(t *testing.T) {
require.Equal(t, []byte{12}, res.Stack[0].Value())
e.Run(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
h.StringLE(),
"getValueWithKey", "key2",
)
@ -408,33 +408,33 @@ func TestDeployWithSigners(t *testing.T) {
t.Run("missing nef", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", "", "--manifest", manifestName)
})
t.Run("missing manifest", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", "")
})
t.Run("corrupted data", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName,
"[", "str1")
})
t.Run("invalid data", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName,
"str1", "str2")
})
t.Run("missing wallet", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName,
"[", "str1", "str2", "]")
@ -447,7 +447,7 @@ func TestDeployWithSigners(t *testing.T) {
})
e.In.WriteString(testcli.ValidatorPass + "\r")
e.Run(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName,
"--force",
@ -534,7 +534,7 @@ func TestContractManifestGroups(t *testing.T) {
e.In.WriteString(testcli.ValidatorPass + "\r")
e.Run(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", nefName, "--manifest", manifestName,
"--force",
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr)
@ -557,22 +557,22 @@ func TestContract_TestInvokeScript(t *testing.T) {
t.Run("missing in", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
})
t.Run("unexisting in", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", badNef)
})
t.Run("invalid nef", func(t *testing.T) {
require.NoError(t, os.WriteFile(badNef, []byte("qwer"), os.ModePerm))
e.RunWithError(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", badNef)
})
t.Run("invalid signers", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", goodNef, "--", "not-a-valid-signer")
})
t.Run("no RPC endpoint", func(t *testing.T) {
@ -582,34 +582,34 @@ func TestContract_TestInvokeScript(t *testing.T) {
})
t.Run("good", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", goodNef)
})
t.Run("good with hashed signer", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", goodNef, "--", util.Uint160{1, 2, 3}.StringLE())
})
t.Run("good with addressed signer", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--in", goodNef, "--", address.Uint160ToString(util.Uint160{1, 2, 3}))
})
t.Run("historic, invalid", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", "bad",
"--in", goodNef)
})
t.Run("historic, index", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", "0",
"--in", goodNef)
})
t.Run("historic, hash", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokescript",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", e.Chain.GetHeaderHash(0).StringLE(),
"--in", goodNef)
})
@ -639,7 +639,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
require.NoError(t, err)
require.NoError(t, os.WriteFile(configPath, yml, 0666))
e.Run(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr, "--force",
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0], "--force",
"--wallet-config", configPath, "--address", testcli.ValidatorAddr,
"--in", nefName, "--manifest", manifestName)
@ -663,7 +663,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
})
cmd := []string{"neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://" + e.RPC.Addr}
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0]}
t.Run("missing hash", func(t *testing.T) {
e.RunWithError(t, cmd...)
})
@ -704,7 +704,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
t.Run("real invoke", func(t *testing.T) {
cmd := []string{"neo-go", "contract", "invokefunction",
"--rpc-endpoint", "http://" + e.RPC.Addr}
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0]}
t.Run("missing wallet", func(t *testing.T) {
cmd := append(cmd, h.StringLE(), "getValue")
e.RunWithError(t, cmd...)
@ -778,7 +778,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
txout := filepath.Join(tmpDir, "test_contract_tx.json")
cmd = []string{"neo-go", "contract", "invokefunction",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--out", txout,
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
}
@ -837,7 +837,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
t.Run("test Storage.Find", func(t *testing.T) {
cmd := []string{"neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
h.StringLE(), "testFind"}
t.Run("keys only", func(t *testing.T) {
@ -901,7 +901,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
stateBeforeUpdate = mptBeforeUpdate.Root
e.In.WriteString("one\r")
e.Run(t, "neo-go", "contract", "invokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--address", testcli.ValidatorAddr,
"--force",
h.StringLE(), "update",
@ -913,14 +913,14 @@ func TestComlileAndInvokeFunction(t *testing.T) {
indexAfterUpdate = e.Chain.BlockHeight()
e.In.WriteString("one\r")
e.Run(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
h.StringLE(), "getValue")
checkGetValueOut("on update|sub update")
})
t.Run("historic", func(t *testing.T) {
t.Run("bad ref", func(t *testing.T) {
e.RunWithError(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", "bad",
h.StringLE(), "getValue")
})
@ -931,7 +931,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
} {
t.Run(name, func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", ref,
h.StringLE(), "getValue")
})
@ -939,7 +939,7 @@ func TestComlileAndInvokeFunction(t *testing.T) {
}
t.Run("updated historic", func(t *testing.T) {
e.Run(t, "neo-go", "contract", "testinvokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--historic", strconv.FormatUint(uint64(indexAfterUpdate), 10),
h.StringLE(), "getValue")
checkGetValueOut("on update|sub update")

38
cli/wallet/candidate_test.go
View file

@ -22,7 +22,7 @@ func TestRegisterCandidate(t *testing.T) {
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -31,29 +31,29 @@ func TestRegisterCandidate(t *testing.T) {
e.CheckTxPersisted(t)
e.Run(t, "neo-go", "query", "committee",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
e.CheckNextLine(t, "^\\s*"+validatorHex)
e.Run(t, "neo-go", "query", "candidates",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
e.CheckNextLine(t, "^\\s*Key.+$") // Header.
e.CheckEOF(t)
// missing address
e.RunWithError(t, "neo-go", "wallet", "candidate", "register",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet)
// additional parameter
e.RunWithError(t, "neo-go", "wallet", "candidate", "register",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"error")
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "candidate", "register",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"--force")
@ -68,14 +68,14 @@ func TestRegisterCandidate(t *testing.T) {
t.Run("VoteUnvote", func(t *testing.T) {
// positional instead of a flag.
e.RunWithError(t, "neo-go", "wallet", "candidate", "vote",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
validatorHex) // not "--candidate hex", but "hex".
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "candidate", "vote",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"--candidate", validatorHex,
@ -89,18 +89,18 @@ func TestRegisterCandidate(t *testing.T) {
require.Equal(t, b, vs[0].Votes)
e.Run(t, "neo-go", "query", "committee",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
e.CheckNextLine(t, "^\\s*"+validatorHex)
e.Run(t, "neo-go", "query", "candidates",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
e.CheckNextLine(t, "^\\s*Key.+$") // Header.
e.CheckNextLine(t, "^\\s*"+validatorHex+"\\s*"+b.String()+"\\s*true\\s*true$")
e.CheckEOF(t)
// check state
e.Run(t, "neo-go", "query", "voter",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
validatorAddress)
e.CheckNextLine(t, "^\\s*Voted:\\s+"+validatorHex+"\\s+\\("+validatorAddress+"\\)$")
e.CheckNextLine(t, "^\\s*Amount\\s*:\\s*"+b.String()+"$")
@ -110,7 +110,7 @@ func TestRegisterCandidate(t *testing.T) {
// unvote
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "candidate", "vote",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"--force")
@ -123,7 +123,7 @@ func TestRegisterCandidate(t *testing.T) {
// check state
e.Run(t, "neo-go", "query", "voter",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
validatorAddress)
e.CheckNextLine(t, "^\\s*Voted:\\s+"+"null") // no vote.
e.CheckNextLine(t, "^\\s*Amount\\s*:\\s*"+b.String()+"$")
@ -133,18 +133,18 @@ func TestRegisterCandidate(t *testing.T) {
// missing address
e.RunWithError(t, "neo-go", "wallet", "candidate", "unregister",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet)
// additional argument
e.RunWithError(t, "neo-go", "wallet", "candidate", "unregister",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"argument")
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "candidate", "unregister",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--address", validatorAddress,
"--force")
@ -156,7 +156,7 @@ func TestRegisterCandidate(t *testing.T) {
// query voter: missing address
e.RunWithError(t, "neo-go", "query", "voter")
// Excessive parameters.
e.RunWithError(t, "neo-go", "query", "voter", "--rpc-endpoint", "http://"+e.RPC.Addr, validatorAddress, validatorAddress)
e.RunWithError(t, "neo-go", "query", "committee", "--rpc-endpoint", "http://"+e.RPC.Addr, "something")
e.RunWithError(t, "neo-go", "query", "candidates", "--rpc-endpoint", "http://"+e.RPC.Addr, "something")
e.RunWithError(t, "neo-go", "query", "voter", "--rpc-endpoint", "http://"+e.RPC.Addresses()[0], validatorAddress, validatorAddress)
e.RunWithError(t, "neo-go", "query", "committee", "--rpc-endpoint", "http://"+e.RPC.Addresses()[0], "something")
e.RunWithError(t, "neo-go", "query", "candidates", "--rpc-endpoint", "http://"+e.RPC.Addresses()[0], "something")
}

22
cli/wallet/multisig_test.go
View file

@ -55,7 +55,7 @@ func TestSignMultisigTx(t *testing.T) {
// Transfer funds to the multisig.
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -74,7 +74,7 @@ func TestSignMultisigTx(t *testing.T) {
})
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet1Path, "--from", multisigAddr,
"--to", priv.Address(), "--token", "NEO", "--amount", "1",
"--out", txPath)
@ -99,7 +99,7 @@ func TestSignMultisigTx(t *testing.T) {
// invalid out
e.In.WriteString("pass\r")
e.RunWithError(t, "neo-go", "wallet", "sign",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet2Path, "--address", multisigAddr,
"--in", txPath, "--out", t.TempDir())
@ -118,7 +118,7 @@ func TestSignMultisigTx(t *testing.T) {
})
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet1Path, "--from", multisigAddr,
"--to", priv.Address(), "--token", "NEO", "--amount", "1",
"--out", txPath)
@ -152,11 +152,11 @@ func TestSignMultisigTx(t *testing.T) {
t.Run("excessive parameters", func(t *testing.T) {
e.RunWithError(t, "neo-go", "util", "txdump",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
txPath, "garbage")
})
e.Run(t, "neo-go", "util", "txdump",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
txPath)
e.CheckTxTestInvokeOutput(t, 11)
res := new(result.Invoke)
@ -194,7 +194,7 @@ func TestSignMultisigTx(t *testing.T) {
t.Run("sign, save and send", func(t *testing.T) {
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "wallet", "sign",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet2Path, "--address", multisigAddr,
"--in", txPath, "--out", txPath)
e.CheckTxPersisted(t)
@ -202,7 +202,7 @@ func TestSignMultisigTx(t *testing.T) {
t.Run("double-sign", func(t *testing.T) {
e.In.WriteString("pass\r")
e.RunWithError(t, "neo-go", "wallet", "sign",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet2Path, "--address", multisigAddr,
"--in", txPath, "--out", txPath)
})
@ -217,13 +217,13 @@ func TestSignMultisigTx(t *testing.T) {
e.In.WriteString("acc\rpass\rpass\r")
e.Run(t, "neo-go", "wallet", "import-deployed",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet1Path, "--wif", simplePriv.WIF(),
"--contract", h.StringLE())
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "contract", "invokefunction",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet1Path, "--address", multisigHash.StringLE(), // test with scripthash instead of address
"--out", txPath,
e.Chain.GoverningTokenHash().StringLE(), "transfer",
@ -249,7 +249,7 @@ func TestSignMultisigTx(t *testing.T) {
// Contract.
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "wallet", "sign",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet1Path, "--address", address.Uint160ToString(h),
"--in", txPath, "--out", txPath)
tx, _ := e.CheckTxPersisted(t)

38
cli/wallet/wallet_test.go
View file

@ -470,17 +470,17 @@ func TestWalletClaimGas(t *testing.T) {
t.Run("missing wallet path", func(t *testing.T) {
e.RunWithError(t, "neo-go", "wallet", "claim",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--address", testcli.TestWalletAccount)
})
t.Run("missing address", func(t *testing.T) {
e.RunWithError(t, "neo-go", "wallet", "claim",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.TestWalletPath)
})
t.Run("invalid address", func(t *testing.T) {
e.RunWithError(t, "neo-go", "wallet", "claim",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.TestWalletPath,
"--address", util.Uint160{}.StringLE())
})
@ -493,14 +493,14 @@ func TestWalletClaimGas(t *testing.T) {
t.Run("insufficient funds", func(t *testing.T) {
e.In.WriteString("testpass\r")
e.RunWithError(t, "neo-go", "wallet", "claim",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.TestWalletPath,
"--address", testcli.TestWalletAccount)
})
args := []string{
"neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet,
"--from", testcli.ValidatorAddr,
"--force",
@ -522,7 +522,7 @@ func TestWalletClaimGas(t *testing.T) {
e.In.WriteString("testpass\r")
e.Run(t, "neo-go", "wallet", "claim",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.TestWalletPath,
"--address", testcli.TestWalletAccount,
"--force")
@ -570,7 +570,7 @@ func TestWalletImportDeployed(t *testing.T) {
t.Run("unknown contract", func(t *testing.T) {
e.In.WriteString("acc\rpass\rpass\r")
e.RunWithError(t, "neo-go", "wallet", "import-deployed",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--contract", util.Uint160{}.StringLE(),
"--wif", priv.WIF())
})
@ -578,14 +578,14 @@ func TestWalletImportDeployed(t *testing.T) {
badH := deployNNSContract(t, e) // wrong contract with no `verify` method
e.In.WriteString("acc\rpass\rpass\r")
e.RunWithError(t, "neo-go", "wallet", "import-deployed",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--contract", badH.StringLE(),
"--wif", priv.WIF())
})
e.In.WriteString("acc\rpass\rpass\r")
e.Run(t, "neo-go", "wallet", "import-deployed",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--wif", priv.WIF(), "--name", "my_acc",
"--contract", h.StringLE())
@ -599,7 +599,7 @@ func TestWalletImportDeployed(t *testing.T) {
t.Run("re-importing", func(t *testing.T) {
e.In.WriteString("acc\rpass\rpass\r")
e.RunWithError(t, "neo-go", "wallet", "import-deployed",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--wif", priv.WIF(), "--name", "my_acc",
"--contract", h.StringLE())
})
@ -607,7 +607,7 @@ func TestWalletImportDeployed(t *testing.T) {
t.Run("Sign", func(t *testing.T) {
e.In.WriteString("one\r")
e.Run(t, "neo-go", "wallet", "nep17", "multitransfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", testcli.ValidatorWallet, "--from", testcli.ValidatorAddr,
"--force",
"NEO:"+contractAddr+":10",
@ -619,7 +619,7 @@ func TestWalletImportDeployed(t *testing.T) {
e.In.WriteString("pass\r")
e.Run(t, "neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--from", contractAddr,
"--force",
"--to", privTo.Address(), "--token", "NEO", "--amount", "1")
@ -680,7 +680,7 @@ func TestOfflineSigning(t *testing.T) {
t.Run("1/1 multisig", func(t *testing.T) {
args := []string{"neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", walletPath,
"--from", testcli.ValidatorAddr,
"--to", w.Accounts[0].Address,
@ -699,15 +699,15 @@ func TestOfflineSigning(t *testing.T) {
t.Run("sendtx", func(t *testing.T) {
// And it can't be sent.
e.RunWithError(t, "neo-go", "util", "sendtx",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
txPath)
// Even with too many arguments.
e.RunWithError(t, "neo-go", "util", "sendtx",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
txPath, txPath)
// Or no arguments at all.
e.RunWithError(t, "neo-go", "util", "sendtx",
"--rpc-endpoint", "http://"+e.RPC.Addr)
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0])
})
// But it can be signed with a proper wallet.
e.In.WriteString("one\r")
@ -716,7 +716,7 @@ func TestOfflineSigning(t *testing.T) {
"--in", txPath, "--out", txPath)
// And then anyone can send (even via wallet sign).
e.Run(t, "neo-go", "wallet", "sign",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", walletPath, "--address", testcli.ValidatorAddr,
"--in", txPath)
})
@ -724,7 +724,7 @@ func TestOfflineSigning(t *testing.T) {
t.Run("simple signature", func(t *testing.T) {
simpleAddr := w.Accounts[0].Address
args := []string{"neo-go", "wallet", "nep17", "transfer",
"--rpc-endpoint", "http://" + e.RPC.Addr,
"--rpc-endpoint", "http://" + e.RPC.Addresses()[0],
"--wallet", walletPath,
"--from", simpleAddr,
"--to", testcli.ValidatorAddr,
@ -749,7 +749,7 @@ func TestOfflineSigning(t *testing.T) {
e.RunWithError(t, "neo-go", "util", "sendtx", txPath)
// But it requires no wallet at all.
e.Run(t, "neo-go", "util", "sendtx",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
txPath)
})
}

28
config/protocol.mainnet.neofs.yml
View file

@ -47,34 +47,38 @@ ApplicationConfiguration:
DataDirectoryPath: "./chains/mainnet.neofs"
# BoltDBOptions:
# FilePath: "./chains/mainnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 40333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":40333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 100
AttemptConnPeers: 20
MinPeers: 5
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
- application/json
RPC:
Enabled: true
Addresses:
- ":40332"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 40332
TLSConfig:
Enabled: false
Port: 40331
Addresses:
- ":40331"
CertFile: serv.crt
KeyFile: serv.key
Prometheus:
Enabled: false
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false
Port: 2113
Addresses:
- ":2113"

28
config/protocol.mainnet.yml
View file

@ -59,17 +59,17 @@ ApplicationConfiguration:
DataDirectoryPath: "./chains/mainnet"
# BoltDBOptions:
# FilePath: "./chains/mainnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 10333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":10333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 100
AttemptConnPeers: 20
MinPeers: 10
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -82,17 +82,21 @@ ApplicationConfiguration:
RPC:
Enabled: true
Addresses:
- ":10332"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 10332
TLSConfig:
Enabled: false
Port: 10331
Addresses:
- ":10331"
CertFile: serv.crt
KeyFile: serv.key
Prometheus:
Enabled: true
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false
Port: 2113
Addresses:
- ":2113"

25
config/protocol.privnet.docker.four.yml
View file

@ -38,17 +38,17 @@ ApplicationConfiguration:
DataDirectoryPath: "/chains/four"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20336
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20336" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 3
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -69,15 +69,18 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":30336"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 30336
Prometheus:
Enabled: true
Port: 20004
Addresses:
- ":20004"
Pprof:
Enabled: false
Port: 20014
Addresses:
- ":20014"
UnlockWallet:
Path: "/wallet4.json"
Password: "four"

22
config/protocol.privnet.docker.one.yml
View file

@ -38,17 +38,17 @@ ApplicationConfiguration:
DataDirectoryPath: "/chains/one"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 3
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -69,12 +69,14 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":30333"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 30333
Prometheus:
Enabled: true
Port: 20001
Addresses:
- ":20001"
Pprof:
Enabled: false
Port: 20011

25
config/protocol.privnet.docker.single.yml
View file

@ -32,17 +32,17 @@ ApplicationConfiguration:
DataDirectoryPath: "/chains/single"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 0
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -60,15 +60,18 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":30333"
EnableCORSWorkaround: false
MaxGasInvoke: 15
Port: 30333
Prometheus:
Enabled: true
Port: 20001
Addresses:
- ":20001"
Pprof:
Enabled: false
Port: 20011
Addresses:
- ":20011"
UnlockWallet:
Path: "/wallet1.json"
Password: "one"

25
config/protocol.privnet.docker.three.yml
View file

@ -38,17 +38,17 @@ ApplicationConfiguration:
DataDirectoryPath: "/chains/three"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20335
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20335" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 3
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -69,15 +69,18 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":30335"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 30335
Prometheus:
Enabled: true
Port: 20003
Addresses:
- ":20003"
Pprof:
Enabled: false
Port: 20013
Addresses:
- ":20013"
UnlockWallet:
Path: "/wallet3.json"
Password: "three"

25
config/protocol.privnet.docker.two.yml
View file

@ -38,17 +38,17 @@ ApplicationConfiguration:
DataDirectoryPath: "/chains/two"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20334
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20334" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 3
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -71,13 +71,16 @@ ApplicationConfiguration:
Enabled: true
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 30334
Addresses:
- ":30334"
Prometheus:
Enabled: true
Port: 20002
Addresses:
- ":20002"
Pprof:
Enabled: false
Port: 20012
Addresses:
- ":20012"
UnlockWallet:
Path: "/wallet2.json"
Password: "two"

28
config/protocol.privnet.yml
View file

@ -38,17 +38,17 @@ ApplicationConfiguration:
DataDirectoryPath: "./chains/privnet"
# BoltDBOptions:
# FilePath: "./chains/privnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20332
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20332" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 10
AttemptConnPeers: 5
MinPeers: 3
Relay: true
P2PNotary:
Enabled: false
UnlockWallet:
@ -56,19 +56,23 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":20331"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 20331
SessionEnabled: true
SessionExpirationTime: 180 # higher expiration time for manual requests and tests.
TLSConfig:
Enabled: false
Port: 20330
Addresses:
- ":20330"
CertFile: serv.crt
KeyFile: serv.key
Prometheus:
Enabled: true
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false
Port: 2113
Addresses:
- ":2113"

28
config/protocol.testnet.neofs.yml
View file

@ -47,32 +47,34 @@ ApplicationConfiguration:
DataDirectoryPath: "./chains/testnet.neofs"
# BoltDBOptions:
# FilePath: "./chains/testnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 50333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":50333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 100
AttemptConnPeers: 20
MinPeers: 5
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
- application/json
RPC:
Enabled: true
Addresses:
- ":50332"
EnableCORSWorkaround: false
MaxGasInvoke: 100
Port: 50332
StartWhenSynchronized: false
TLSConfig:
Enabled: false
Addresses:
- ":50331"
CertFile: server.crt
KeyFile: server.key
Port: 50331
P2PNotary:
Enabled: false
UnlockWallet:
@ -80,7 +82,9 @@ ApplicationConfiguration:
Path: "/notary_wallet.json"
Prometheus:
Enabled: false
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false
Port: 2113
Addresses:
- ":2113"

28
config/protocol.testnet.yml
View file

@ -62,17 +62,17 @@ ApplicationConfiguration:
DataDirectoryPath: "./chains/testnet"
# BoltDBOptions:
# FilePath: "./chains/testnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 100
AttemptConnPeers: 20
MinPeers: 10
Relay: true
Oracle:
Enabled: false
AllowedContentTypes:
@ -84,17 +84,21 @@ ApplicationConfiguration:
Password: "pass"
RPC:
Enabled: true
Addresses:
- ":20332"
MaxGasInvoke: 15
EnableCORSWorkaround: false
Port: 20332
TLSConfig:
Enabled: false
Port: 20331
Addresses:
- ":20331"
CertFile: serv.crt
KeyFile: serv.key
Prometheus:
Enabled: true
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false
Port: 2113
Addresses:
- ":2113"

26
config/protocol.unit_testnet.single.yml
View file

@ -33,17 +33,17 @@ ApplicationConfiguration:
# DataDirectoryPath: "./chains/unit_testnet"
# BoltDBOptions:
# FilePath: "./chains/unit_testnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 0
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":0" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MinPeers: 0
MaxPeers: 10
AttemptConnPeers: 5
Relay: true
UnlockWallet:
Path: "../testdata/wallet1_solo.json"
Password: "one"
@ -53,14 +53,16 @@ ApplicationConfiguration:
Path: "/notary_wallet.json"
Password: "pass"
RPC:
Address: localhost
MaxGasInvoke: 15
Enabled: true
Addresses:
- "localhost:0" # let the system choose port dynamically
EnableCORSWorkaround: false
Port: 0 # let the system choose port dynamically
Prometheus:
Enabled: false #since it's not useful for unit tests.
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false #since it's not useful for unit tests.
Port: 2113
Addresses:
- ":2113"

26
config/protocol.unit_testnet.yml
View file

@ -42,33 +42,35 @@ ApplicationConfiguration:
# DataDirectoryPath: "./chains/unit_testnet"
# BoltDBOptions:
# FilePath: "./chains/unit_testnet.bolt"
# Uncomment in order to set up custom address for node.
# Address: localhost
NodePort: 20333
Relay: true
DialTimeout: 3
ProtoTickInterval: 2
PingInterval: 30
PingTimeout: 90
P2P:
Addresses:
- ":20333" # in form of "[host]:[port][:announcedPort]"
DialTimeout: 3s
ProtoTickInterval: 2s
PingInterval: 30s
PingTimeout: 90s
MaxPeers: 50
AttemptConnPeers: 5
MinPeers: 0
Relay: true
P2PNotary:
Enabled: false
UnlockWallet:
Path: "/notary_wallet.json"
Password: "pass"
RPC:
Address: localhost
MaxGasInvoke: 15
Enabled: true
Addresses:
- "localhost:0" # let the system choose port dynamically
EnableCORSWorkaround: false
SessionEnabled: true
SessionExpirationTime: 2 # enough for tests as they run locally.
Port: 0 # let the system choose port dynamically
Prometheus:
Enabled: false #since it's not useful for unit tests.
Port: 2112
Addresses:
- ":2112"
Pprof:
Enabled: false #since it's not useful for unit tests.
Port: 2113
Addresses:
- ":2113"

103
docs/node-configuration.md
View file

@ -16,30 +16,77 @@ node-related settings described in the table below.
| Section | Type | Default value | Description |
| --- | --- | --- | --- |
| Address | `string` | `0.0.0.0` | Node address that P2P protocol handler binds to. |
| AnnouncedPort | `uint16` | Same as `NodePort` | Node port which should be used to announce node's port on P2P layer, it can differ from the `NodePort` the node is bound to (for example, if your node is behind NAT). |
| AttemptConnPeers | `int` | `20` | Number of connection to try to establish when the connection count drops below the `MinPeers` value.|
| BroadcastFactor | `int` | `0` | Multiplier that is used to determine the number of optimal gossip fan-out peer number for broadcasted messages (0-100). By default it's zero, node uses the most optimized value depending on the estimated network size (`2.5×log(size)`), so the node may have 20 peers and calculate that it needs to broadcast messages to just 10 of them. With BroadcastFactor set to 100 it will always send messages to all peers, any value in-between 0 and 100 is used for weighted calculation, for example if it's 30 then 13 neighbors will be used in the previous case. |
| Address | `string` | `0.0.0.0` | Node address that P2P protocol handler binds to. Warning: this field is deprecated, please, use `Addresses` instead. |
| AnnouncedPort | `uint16` | Same as `NodePort` | Node port which should be used to announce node's port on P2P layer, it can differ from the `NodePort` the node is bound to (for example, if your node is behind NAT). Warning: this field is deprecated, please, use `Addresses` instead. |
| AttemptConnPeers | `int` | `20` | Number of connection to try to establish when the connection count drops below the `MinPeers` value. Warning: this field is deprecated and moved to `P2P` section. |
| BroadcastFactor | `int` | `0` | Multiplier that is used to determine the number of optimal gossip fan-out peer number for broadcasted messages (0-100). By default it's zero, node uses the most optimized value depending on the estimated network size (`2.5×log(size)`), so the node may have 20 peers and calculate that it needs to broadcast messages to just 10 of them. With BroadcastFactor set to 100 it will always send messages to all peers, any value in-between 0 and 100 is used for weighted calculation, for example if it's 30 then 13 neighbors will be used in the previous case. Warning: this field is deprecated and moved to `P2P` section. |
| DBConfiguration | [DB Configuration](#DB-Configuration) | | Describes configuration for database. See the [DB Configuration](#DB-Configuration) section for details. |
| DialTimeout | `int64` | `0` | Maximum duration a single dial may take in seconds. |
| ExtensiblePoolSize | `int` | `20` | Maximum amount of the extensible payloads from a single sender stored in a local pool. |
| DialTimeout | `int64` | `0` | Maximum duration a single dial may take in seconds. Warning: this field is deprecated and moved to `P2P` section. |
| ExtensiblePoolSize | `int` | `20` | Maximum amount of the extensible payloads from a single sender stored in a local pool. Warning: this field is deprecated and moved to `P2P` section. |
| LogLevel | `string` | "info" | Minimal logged messages level (can be "debug", "info", "warn", "error", "dpanic", "panic" or "fatal"). |
| LogPath | `string` | "", so only console logging | File path where to store node logs. |
| MaxPeers | `int` | `100` | Maximum numbers of peers that can be connected to the server. |
| MinPeers | `int` | `5` | Minimum number of peers for normal operation; when the node has less than this number of peers it tries to connect with some new ones. |
| NodePort | `uint16` | `0`, which is any free port | The actual node port it is bound to. |
| MaxPeers | `int` | `100` | Maximum numbers of peers that can be connected to the server. Warning: this field is deprecated and moved to `P2P` section. |
| MinPeers | `int` | `5` | Minimum number of peers for normal operation; when the node has less than this number of peers it tries to connect with some new ones. Warning: this field is deprecated and moved to `P2P` section. |
| NodePort | `uint16` | `0`, which is any free port | The actual node port it is bound to. Warning: this field is deprecated, please, use `Addresses` instead. |
| Oracle | [Oracle Configuration](#Oracle-Configuration) | | Oracle module configuration. See the [Oracle Configuration](#Oracle-Configuration) section for details. |
| P2P | [P2P Configuration](#P2P-Configuration) | | Configuration values for P2P network interaction. See the [P2P Configuration](#P2P-Configuration) section for details. |
| P2PNotary | [P2P Notary Configuration](#P2P-Notary-Configuration) | | P2P Notary module configuration. See the [P2P Notary Configuration](#P2P-Notary-Configuration) section for details. |
| PingInterval | `int64` | `30` | Interval in seconds used in pinging mechanism for syncing blocks. |
| PingTimeout | `int64` | `90` | Time to wait for pong (response for sent ping request). |
| PingInterval | `int64` | `30` | Interval in seconds used in pinging mechanism for syncing blocks. Warning: this field is deprecated and moved to `P2P` section. |
| PingTimeout | `int64` | `90` | Time to wait for pong (response for sent ping request). Warning: this field is deprecated and moved to `P2P` section. |
| Pprof | [Metrics Services Configuration](#Metrics-Services-Configuration) | | Configuration for pprof service (profiling statistics gathering). See the [Metrics Services Configuration](#Metrics-Services-Configuration) section for details. |
| Prometheus | [Metrics Services Configuration](#Metrics-Services-Configuration) | | Configuration for Prometheus (monitoring system). See the [Metrics Services Configuration](#Metrics-Services-Configuration) section for details |
| ProtoTickInterval | `int64` | `5` | Duration in seconds between protocol ticks with each connected peer. |
| ProtoTickInterval | `int64` | `5` | Duration in seconds between protocol ticks with each connected peer. Warning: this field is deprecated and moved to `P2P` section. |
| Relay | `bool` | `true` | Determines whether the server is forwarding its inventory. |
| RPC | [RPC Configuration](#RPC-Configuration) | | Describes [RPC subsystem](rpc.md) configuration. See the [RPC Configuration](#RPC-Configuration) for details. |
| StateRoot | [State Root Configuration](#State-Root-Configuration) | | State root module configuration. See the [State Root Configuration](#State-Root-Configuration) section for details. |
| UnlockWallet | [Unlock Wallet Configuration](#Unlock-Wallet-Configuration) | | Node wallet configuration used for consensus (dBFT) operation. See the [Unlock Wallet Configuration](#Unlock-Wallet-Configuration) section for details. |
### P2P Configuration
`P2P` section contains configuration for peer-to-peer node communications and has
the following format:
```
P2P:
Addresses:
- "0.0.0.0:0" # any free port on all available addresses (in form of "[host]:[port][:announcedPort]")
AttemptConnPeers: 20
BroadcastFactor: 0
DialTimeout: 0s
MaxPeers: 100
MinPeers: 5
PingInterval: 30s
PingTimeout: 90s
ProtoTickInterval: 5s
ExtensiblePoolSize: 20
```
where:
- `Addresses` (`[]string`) is the list of the node addresses that P2P protocol
handler binds to. Each address has the form of `[address]:[nodePort][:announcedPort]`
where `address` is the address itself, `nodePort` is the actual P2P port node listens at;
`announcedPort` is the node port which should be used to announce node's port on P2P layer,
it can differ from the `nodePort` the node is bound to if specified (for example, if your
node is behind NAT).
- `AttemptConnPeers` (`int`) is the number of connection to try to establish when the
connection count drops below the `MinPeers` value.
- `BroadcastFactor` (`int`) is the multiplier that is used to determine the number of
optimal gossip fan-out peer number for broadcasted messages (0-100). By default, it's
zero, node uses the most optimized value depending on the estimated network size
(`2.5×log(size)`), so the node may have 20 peers and calculate that it needs to broadcast
messages to just 10 of them. With BroadcastFactor set to 100 it will always send messages
to all peers, any value in-between 0 and 100 is used for weighted calculation, for example
if it's 30 then 13 neighbors will be used in the previous case.
- `DialTimeout` (`Duration`) is the maximum duration a single dial may take.
- `ExtensiblePoolSize` (`int`) is the maximum amount of the extensible payloads from a single
sender stored in a local pool.
- `MaxPeers` (`int`) is the maximum numbers of peers that can be connected to the server.
- `MinPeers` (`int`) is the minimum number of peers for normal operation; when the node has
less than this number of peers it tries to connect with some new ones.
- `PingInterval` (`Duration`) is the interval used in pinging mechanism for syncing
blocks.
- `PingTimeout` (`Duration`) is the time to wait for pong (response for sent ping request).
- `ProtoTickInterval` (`Duration`) is the duration between protocol ticks with each
connected peer.
### DB Configuration
`DBConfiguration` section describes configuration for node database and has
@ -118,17 +165,21 @@ Prometheus) and has the following structure:
```
Pprof:
Enabled: false
Address: ""
Port: "30001"
Addresses:
- ":30001"
Prometheus:
Enabled: false
Address: ""
Port: "40001"
Addresses:
- ":40001"
```
where:
- `Enabled` denotes whether the service is enabled.
- `Address` is a service address to be running at.
- `Port` is a service port to be bound to.
- `Address` is a service address to be running at. Warning: this field is deprecated,
please, use `Addresses` instead.
- `Port` is a service port to be bound to. Warning: this field is deprecated, please,
use `Addresses` instead.
- `Addresses` is a list of service addresses to be running at and listen to in
the form of "host:port".
### RPC Configuration
@ -137,29 +188,32 @@ the following structure:
```
RPC:
Enabled: true
Address: ""
Addresses:
- ":10332"
EnableCORSWorkaround: false
MaxGasInvoke: 50
MaxIteratorResultItems: 100
MaxFindResultItems: 100
MaxNEP11Tokens: 100
MaxWebSocketClients: 64
Port: 10332
SessionEnabled: false
SessionExpirationTime: 15
SessionBackedByMPT: false
SessionPoolSize: 20
StartWhenSynchronized: false
TLSConfig:
Address: ""
Addresses:
- ":10331"
CertFile: serv.crt
Enabled: true
Port: 10331
KeyFile: serv.key
```
where:
- `Enabled` denotes whether an RPC server should be started.
- `Address` is an RPC server address to be running at.
- `Address` is an RPC server address to be running at. Warning: this field is
deprecated, please, use `Addresses` instead.
- `Addresses` is a list of RPC server addresses to be running at and listen to in
the form of "host:port".
- `EnableCORSWorkaround` turns on a set of origin-related behaviors that make
RPC server wide open for connections from any origins. It enables OPTIONS
request handling for pre-flight CORS and makes the server send
@ -182,7 +236,8 @@ where:
number (64 by default). Attempts to establish additional connections will
lead to websocket handshake failures. Use "-1" to disable websocket
connections (0 will lead to using the default value).
- `Port` is an RPC server port it should be bound to.
- `Port` is an RPC server port it should be bound to. Warning: this field is
deprecated, please, use `Addresses` instead.
- `SessionEnabled` denotes whether session-based iterator JSON-RPC API is enabled.
If true, then all iterators got from `invoke*` calls will be stored as sessions
on the server side available for further traverse. `traverseiterator` and

5
internal/testcli/executor.go
View file

@ -146,7 +146,8 @@ func NewTestChain(t *testing.T, f func(*config.Config), run bool) (*core.Blockch
go chain.Run()
}
serverConfig := network.NewServerConfig(cfg)
serverConfig, err := network.NewServerConfig(cfg)
require.NoError(t, err)
serverConfig.UserAgent = fmt.Sprintf(config.UserAgentFormat, "0.98.3-test")
netSrv, err := network.NewServer(serverConfig, chain, chain.GetStateSyncModule(), zap.NewNop())
require.NoError(t, err)
@ -348,7 +349,7 @@ func DeployContract(t *testing.T, e *Executor, inPath, configPath, wallet, addre
"--out", nefName, "--manifest", manifestName)
e.In.WriteString(pass + "\r")
e.Run(t, "neo-go", "contract", "deploy",
"--rpc-endpoint", "http://"+e.RPC.Addr,
"--rpc-endpoint", "http://"+e.RPC.Addresses()[0],
"--wallet", wallet, "--address", address,
"--force",
"--in", nefName, "--manifest", manifestName)

10
internal/testserdes/testing.go
View file

@ -7,6 +7,7 @@ import (
"github.com/nspcc-dev/neo-go/pkg/io"
"github.com/nspcc-dev/neo-go/pkg/vm/stackitem"
"github.com/stretchr/testify/require"
"gopkg.in/yaml.v3"
)
// MarshalUnmarshalJSON checks if the expected stays the same after
@ -18,6 +19,15 @@ func MarshalUnmarshalJSON(t *testing.T, expected, actual interface{}) {
require.Equal(t, expected, actual)
}
// MarshalUnmarshalYAML checks if the expected stays the same after
// marshal/unmarshal via YAML.
func MarshalUnmarshalYAML(t *testing.T, expected, actual interface{}) {
data, err := yaml.Marshal(expected)
require.NoError(t, err)
require.NoError(t, yaml.Unmarshal(data, actual))
require.Equal(t, expected, actual)
}
// EncodeDecodeBinary checks if the expected stays the same after
// serializing/deserializing via io.Serializable methods.
func EncodeDecodeBinary(t *testing.T, expected, actual io.Serializable) {

172
pkg/config/application_config.go
View file

@ -1,27 +1,46 @@
package config
import (
"fmt"
"net"
"sort"
"strconv"
"strings"
"github.com/nspcc-dev/neo-go/pkg/core/storage/dbconfig"
)
// ApplicationConfiguration config specific to the node.
type ApplicationConfiguration struct {
Address string `yaml:"Address"`
AnnouncedNodePort uint16 `yaml:"AnnouncedPort"`
// Deprecated: please, use Addresses field of P2P section instead, this field will be removed in future versions.
Address *string `yaml:"Address,omitempty"`
// Deprecated: please, use Addresses field of P2P section instead, this field will be removed in future versions.
AnnouncedNodePort *uint16 `yaml:"AnnouncedPort,omitempty"`
// Deprecated: this option is moved to the P2P section.
AttemptConnPeers int `yaml:"AttemptConnPeers"`
// BroadcastFactor is the factor (0-100) controlling gossip fan-out number optimization.
//
// Deprecated: this option is moved to the P2P section.
BroadcastFactor int `yaml:"BroadcastFactor"`
DBConfiguration dbconfig.DBConfiguration `yaml:"DBConfiguration"`
// Deprecated: this option is moved to the P2P section.
DialTimeout int64 `yaml:"DialTimeout"`
LogLevel string `yaml:"LogLevel"`
LogPath string `yaml:"LogPath"`
// Deprecated: this option is moved to the P2P section.
MaxPeers int `yaml:"MaxPeers"`
// Deprecated: this option is moved to the P2P section.
MinPeers int `yaml:"MinPeers"`
NodePort uint16 `yaml:"NodePort"`
// Deprecated: please, use Addresses field of P2P section instead, this field will be removed in future versions.
NodePort *uint16 `yaml:"NodePort,omitempty"`
P2P P2P `yaml:"P2P"`
// Deprecated: this option is moved to the P2P section.
PingInterval int64 `yaml:"PingInterval"`
// Deprecated: this option is moved to the P2P section.
PingTimeout int64 `yaml:"PingTimeout"`
Pprof BasicService `yaml:"Pprof"`
Prometheus BasicService `yaml:"Prometheus"`
// Deprecated: this option is moved to the P2P section.
ProtoTickInterval int64 `yaml:"ProtoTickInterval"`
Relay bool `yaml:"Relay"`
RPC RPC `yaml:"RPC"`
@ -30,6 +49,8 @@ type ApplicationConfiguration struct {
P2PNotary P2PNotary `yaml:"P2PNotary"`
StateRoot StateRoot `yaml:"StateRoot"`
// ExtensiblePoolSize is the maximum amount of the extensible payloads from a single sender.
//
// Deprecated: this option is moved to the P2P section.
ExtensiblePoolSize int `yaml:"ExtensiblePoolSize"`
}
@ -37,22 +58,143 @@ type ApplicationConfiguration struct {
// (Oracle, P2PNotary, Pprof, Prometheus, RPC, StateRoot and UnlockWallet sections)
// and LogLevel field.
func (a *ApplicationConfiguration) EqualsButServices(o *ApplicationConfiguration) bool {
if a.Address != o.Address ||
a.AnnouncedNodePort != o.AnnouncedNodePort ||
a.AttemptConnPeers != o.AttemptConnPeers ||
a.BroadcastFactor != o.BroadcastFactor ||
if len(a.P2P.Addresses) != len(o.P2P.Addresses) {
return false
}
aCp := make([]string, len(a.P2P.Addresses))
oCp := make([]string, len(o.P2P.Addresses))
copy(aCp, a.P2P.Addresses)
copy(oCp, o.P2P.Addresses)
sort.Strings(aCp)
sort.Strings(oCp)
for i := range aCp {
if aCp[i] != oCp[i] {
return false
}
}
if a.Address != o.Address || //nolint:staticcheck // SA1019: a.Address is deprecated
a.AnnouncedNodePort != o.AnnouncedNodePort || //nolint:staticcheck // SA1019: a.AnnouncedNodePort is deprecated
a.AttemptConnPeers != o.AttemptConnPeers || //nolint:staticcheck // SA1019: a.AttemptConnPeers is deprecated
a.P2P.AttemptConnPeers != o.P2P.AttemptConnPeers ||
a.BroadcastFactor != o.BroadcastFactor || //nolint:staticcheck // SA1019: a.BroadcastFactor is deprecated
a.P2P.BroadcastFactor != o.P2P.BroadcastFactor ||
a.DBConfiguration != o.DBConfiguration ||
a.DialTimeout != o.DialTimeout ||
a.ExtensiblePoolSize != o.ExtensiblePoolSize ||
a.DialTimeout != o.DialTimeout || //nolint:staticcheck // SA1019: a.DialTimeout is deprecated
a.P2P.DialTimeout != o.P2P.DialTimeout ||
a.ExtensiblePoolSize != o.ExtensiblePoolSize || //nolint:staticcheck // SA1019: a.ExtensiblePoolSize is deprecated
a.P2P.ExtensiblePoolSize != o.P2P.ExtensiblePoolSize ||
a.LogPath != o.LogPath ||
a.MaxPeers != o.MaxPeers ||
a.MinPeers != o.MinPeers ||
a.NodePort != o.NodePort ||
a.PingInterval != o.PingInterval ||
a.PingTimeout != o.PingTimeout ||
a.ProtoTickInterval != o.ProtoTickInterval ||
a.MaxPeers != o.MaxPeers || //nolint:staticcheck // SA1019: a.MaxPeers is deprecated
a.P2P.MaxPeers != o.P2P.MaxPeers ||
a.MinPeers != o.MinPeers || //nolint:staticcheck // SA1019: a.MinPeers is deprecated
a.P2P.MinPeers != o.P2P.MinPeers ||
a.NodePort != o.NodePort || //nolint:staticcheck // SA1019: a.NodePort is deprecated
a.PingInterval != o.PingInterval || //nolint:staticcheck // SA1019: a.PingInterval is deprecated
a.P2P.PingInterval != o.P2P.PingInterval ||
a.PingTimeout != o.PingTimeout || //nolint:staticcheck // SA1019: a.PingTimeout is deprecated
a.P2P.PingTimeout != o.P2P.PingTimeout ||
a.ProtoTickInterval != o.ProtoTickInterval || //nolint:staticcheck // SA1019: a.ProtoTickInterval is deprecated
a.P2P.ProtoTickInterval != o.P2P.ProtoTickInterval ||
a.Relay != o.Relay {
return false
}
return true
}
// AnnounceableAddress is a pair of node address in the form of "[host]:[port]"
// with optional corresponding announced port to be used in version exchange.
type AnnounceableAddress struct {
Address string
AnnouncedPort uint16
}
// GetAddresses parses returns the list of AnnounceableAddress containing information
// gathered from both deprecated Address / NodePort / AnnouncedNodePort and newly
// created Addresses fields.
func (a *ApplicationConfiguration) GetAddresses() ([]AnnounceableAddress, error) {
addrs := make([]AnnounceableAddress, 0, len(a.P2P.Addresses)+1)
if a.Address != nil || a.NodePort != nil || a.AnnouncedNodePort != nil { //nolint:staticcheck // SA1019: a.Address is deprecated
var (
host string
nodePort uint16
)
if a.Address != nil { //nolint:staticcheck // SA1019: a.Address is deprecated
host = *a.Address //nolint:staticcheck // SA1019: a.Address is deprecated
}
if a.NodePort != nil { //nolint:staticcheck // SA1019: a.NodePort is deprecated
nodePort = *a.NodePort //nolint:staticcheck // SA1019: a.NodePort is deprecated
}
addr := AnnounceableAddress{Address: net.JoinHostPort(host, strconv.Itoa(int(nodePort)))}
if a.AnnouncedNodePort != nil { //nolint:staticcheck // SA1019: a.AnnouncedNodePort is deprecated
addr.AnnouncedPort = *a.AnnouncedNodePort //nolint:staticcheck // SA1019: a.AnnouncedNodePort is deprecated
}
addrs = append(addrs, addr)
}
for i, addrStr := range a.P2P.Addresses {
if len(addrStr) == 0 {
return nil, fmt.Errorf("address #%d is empty", i)
}
lastCln := strings.LastIndex(addrStr, ":")
if lastCln == -1 {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // Plain IPv4 address without port.
})
continue
}
lastPort, err := strconv.ParseUint(addrStr[lastCln+1:], 10, 16)
if err != nil {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // Still may be a valid IPv4 of the form "X.Y.Z.Q:" or plain IPv6 "A:B::", keep it.
})
continue
}
penultimateCln := strings.LastIndex(addrStr[:lastCln], ":")
if penultimateCln == -1 {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // IPv4 address with port "X.Y.Z.Q:123"
})
continue
}
isV6 := strings.Count(addrStr, ":") > 2
hasBracket := strings.Contains(addrStr, "]")
if penultimateCln == lastCln-1 {
if isV6 && !hasBracket {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // Plain IPv6 of the form "A:B::123"
})
} else {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr[:lastCln], // IPv4 with empty port and non-empty announced port "X.Y.Z.Q::123" or IPv6 with non-empty announced port "[A:B::]::123".
AnnouncedPort: uint16(lastPort),
})
}
continue
}
_, err = strconv.ParseUint(addrStr[penultimateCln+1:lastCln], 10, 16)
if err != nil {
if isV6 {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // Still may be a valid plain IPv6 of the form "A::B:123" or IPv6 with single port [A:B::]:123, keep it.
})
continue
}
return nil, fmt.Errorf("failed to parse port from %s: %w", addrStr, err) // Some garbage.
}
if isV6 && !hasBracket {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr, // Plain IPv6 of the form "A::1:1"
})
} else {
addrs = append(addrs, AnnounceableAddress{
Address: addrStr[:lastCln], // IPv4 with both ports or IPv6 with both ports specified.
AnnouncedPort: uint16(lastPort),
})
}
}
if len(addrs) == 0 {
addrs = append(addrs, AnnounceableAddress{
Address: ":0",
})
}
return addrs, nil
}

165
pkg/config/application_config_test.go
View file

@ -20,3 +20,168 @@ func TestApplicationConfigurationEquals(t *testing.T) {
require.NoError(t, err)
require.False(t, cfg1.ApplicationConfiguration.EqualsButServices(&cfg2.ApplicationConfiguration))
}
func TestGetAddresses(t *testing.T) {
type testcase struct {
cfg *ApplicationConfiguration
expected []AnnounceableAddress
shouldFail bool
}
addr1 := "1.2.3.4"
addr2 := "5.6.7.8"
addr3 := "4.3.2.1"
v6Plain0 := "3731:54:65fe:2::a7"
v6Plain1 := "3731:54:65fe:2::1"
v6Plain2 := "3731:54:65fe::a:1"
v6Plain3 := "3731:54:65fe::1:1"
v6Plain4 := "3731:54:65fe:2::"
port1 := uint16(1)
port2 := uint16(2)
port3 := uint16(3)
cases := []testcase{
// Compatibility with the old behaviour.
{
cfg: &ApplicationConfiguration{},
expected: []AnnounceableAddress{{Address: ":0"}},
},
{
cfg: &ApplicationConfiguration{Address: &addr1},
expected: []AnnounceableAddress{{Address: addr1 + ":0"}},
},
{
cfg: &ApplicationConfiguration{NodePort: &port1},
expected: []AnnounceableAddress{{Address: ":1"}},
},
{
cfg: &ApplicationConfiguration{AnnouncedNodePort: &port1},
expected: []AnnounceableAddress{{Address: ":0", AnnouncedPort: port1}},
},
{
cfg: &ApplicationConfiguration{Address: &addr1, NodePort: &port1},
expected: []AnnounceableAddress{{Address: addr1 + ":1"}},
},
{
cfg: &ApplicationConfiguration{Address: &addr1, AnnouncedNodePort: &port1},
expected: []AnnounceableAddress{{Address: addr1 + ":0", AnnouncedPort: port1}},
},
{
cfg: &ApplicationConfiguration{NodePort: &port1, AnnouncedNodePort: &port2},
expected: []AnnounceableAddress{{Address: ":1", AnnouncedPort: port2}},
},
{
cfg: &ApplicationConfiguration{NodePort: &port1, AnnouncedNodePort: &port2},
expected: []AnnounceableAddress{{Address: ":1", AnnouncedPort: port2}},
},
{
cfg: &ApplicationConfiguration{Address: &addr1, NodePort: &port1, AnnouncedNodePort: &port2},
expected: []AnnounceableAddress{{Address: addr1 + ":1", AnnouncedPort: port2}},
},
// Compatibility with new multi-addresses.
{
cfg: &ApplicationConfiguration{
Address: &addr1, NodePort: &port1, AnnouncedNodePort: &port2,
P2P: P2P{Addresses: []string{addr1, addr2 + ":3", addr3 + ":1:3"}},
},
expected: []AnnounceableAddress{
{Address: addr1 + ":1", AnnouncedPort: port2},
{Address: addr1},
{Address: addr2 + ":3"},
{Address: addr3 + ":1", AnnouncedPort: port3},
},
},
// Multi-addresses checks.
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{addr1}},
},
expected: []AnnounceableAddress{
{Address: addr1},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{":1"}},
},
expected: []AnnounceableAddress{
{Address: ":1"},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{"::1"}},
},
expected: []AnnounceableAddress{
{Address: ":", AnnouncedPort: port1},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{addr1 + ":1"}},
},
expected: []AnnounceableAddress{
{Address: addr1 + ":1"},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{addr1 + "::1"}},
},
expected: []AnnounceableAddress{
{Address: addr1 + ":", AnnouncedPort: port1},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{addr1 + ":1:2"}},
},
expected: []AnnounceableAddress{
{Address: addr1 + ":1", AnnouncedPort: port2},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{addr1 + ":1", addr2 + "::2"}},
},
expected: []AnnounceableAddress{
{Address: addr1 + ":1"},
{Address: addr2 + ":", AnnouncedPort: port2},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{v6Plain0, v6Plain1, v6Plain2, v6Plain3, v6Plain4}},
},
expected: []AnnounceableAddress{
{Address: v6Plain0},
{Address: v6Plain1},
{Address: v6Plain2},
{Address: v6Plain3},
{Address: v6Plain4},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{"[3731:54:65fe:2::]:123", "[3731:54:65fe:2::]:123:124"}},
},
expected: []AnnounceableAddress{
{Address: "[3731:54:65fe:2::]:123"},
{Address: "[3731:54:65fe:2::]:123", AnnouncedPort: 124},
},
},
{
cfg: &ApplicationConfiguration{
P2P: P2P{Addresses: []string{"127.0.0.1:QWER:123"}},
},
shouldFail: true,
},
}
for i, c := range cases {
actual, err := c.cfg.GetAddresses()
if c.shouldFail {
require.Error(t, err, i)
} else {
require.NoError(t, err)
require.Equal(t, c.expected, actual, i)
}
}
}

37
pkg/config/basic_service.go
View file

@ -1,8 +1,39 @@
package config
// BasicService is used for simple services like Pprof or Prometheus monitoring.
import (
"net"
"strconv"
)
// BasicService is used as a simple base for node services like Pprof, RPC or
// Prometheus monitoring.
type BasicService struct {
Enabled bool `yaml:"Enabled"`
Address string `yaml:"Address"`
Port string `yaml:"Port"`
// Deprecated: please, use Addresses section instead. This field will be removed later.
Address *string `yaml:"Address,omitempty"`
// Deprecated: please, use Addresses section instead. This field will be removed later.
Port *uint16 `yaml:"Port,omitempty"`
// Addresses holds the list of bind addresses in the form of "address:port".
Addresses []string `yaml:"Addresses"`
}
// GetAddresses returns the set of unique (in terms of raw strings) pairs host:port
// for the given basic service.
func (s BasicService) GetAddresses() []string {
addrs := make([]string, len(s.Addresses), len(s.Addresses)+1)
copy(addrs, s.Addresses)
if s.Address != nil || s.Port != nil { //nolint:staticcheck // SA1019: s.Address is deprecated
var (
addr string
port uint16
)
if s.Address != nil { //nolint:staticcheck // SA1019: s.Address is deprecated
addr = *s.Address //nolint:staticcheck // SA1019: s.Address is deprecated
}
if s.Port != nil { //nolint:staticcheck // SA1019: s.Port is deprecated
port = *s.Port //nolint:staticcheck // SA1019: s.Port is deprecated
}
addrs = append(addrs, net.JoinHostPort(addr, strconv.FormatUint(uint64(port), 10)))
}
return addrs
}

29
pkg/config/basic_service_test.go Normal file
View file

@ -0,0 +1,29 @@
package config
import (
"testing"
"github.com/stretchr/testify/require"
)
func TestBasicService_GetAddresses(t *testing.T) {
addr := "1.2.3.4"
port := uint16(1234)
s := BasicService{
Enabled: false,
Address: &addr,
Port: &port,
Addresses: []string{"1.2.3.4:1234", /* same as Address:Port */
"3.4.5.6:1234", "2.3.4.5", ":1235", "2.3.4.5:1234",
"3.4.5.6:1234" /* already in list */},
}
require.Equal(t, []string{
"1.2.3.4:1234",
"3.4.5.6:1234",
"2.3.4.5",
":1235",
"2.3.4.5:1234",
"3.4.5.6:1234",
"1.2.3.4:1234",
}, s.GetAddresses())
}

4
pkg/config/config.go
View file

@ -55,8 +55,10 @@ func LoadFile(configPath string) (Config, error) {
config := Config{
ApplicationConfiguration: ApplicationConfiguration{
P2P: P2P{
PingInterval: 30,
PingTimeout: 90,
PingTimeout: 30,
},
RPC: RPC{
MaxIteratorResultItems: DefaultMaxIteratorResultItems,
MaxFindResultItems: 100,

19
pkg/config/p2p.go Normal file
View file

@ -0,0 +1,19 @@
package config
import "time"
// P2P holds P2P node settings.
type P2P struct {
// Addresses stores the node address list in the form of "[host]:[port][:announcedPort]".
Addresses []string `yaml:"Addresses"`
AttemptConnPeers int `yaml:"AttemptConnPeers"`
// BroadcastFactor is the factor (0-100) controlling gossip fan-out number optimization.
BroadcastFactor int `yaml:"BroadcastFactor"`
DialTimeout time.Duration `yaml:"DialTimeout"`
ExtensiblePoolSize int `yaml:"ExtensiblePoolSize"`
MaxPeers int `yaml:"MaxPeers"`
MinPeers int `yaml:"MinPeers"`
PingInterval time.Duration `yaml:"PingInterval"`
PingTimeout time.Duration `yaml:"PingTimeout"`
ProtoTickInterval time.Duration `yaml:"ProtoTickInterval"`
}

8
pkg/config/rpc_config.go
View file

@ -7,8 +7,7 @@ import (
type (
// RPC is an RPC service configuration information.
RPC struct {
Address string `yaml:"Address"`
Enabled bool `yaml:"Enabled"`
BasicService `yaml:",inline"`
EnableCORSWorkaround bool `yaml:"EnableCORSWorkaround"`
// MaxGasInvoke is the maximum amount of GAS which
// can be spent during an RPC call.
@ -17,7 +16,6 @@ type (
MaxFindResultItems int `yaml:"MaxFindResultItems"`
MaxNEP11Tokens int `yaml:"MaxNEP11Tokens"`
MaxWebSocketClients int `yaml:"MaxWebSocketClients"`
Port uint16 `yaml:"Port"`
SessionEnabled bool `yaml:"SessionEnabled"`
SessionExpirationTime int `yaml:"SessionExpirationTime"`
SessionBackedByMPT bool `yaml:"SessionBackedByMPT"`
@ -28,10 +26,8 @@ type (
// TLS describes SSL/TLS configuration.
TLS struct {
Address string `yaml:"Address"`
BasicService `yaml:",inline"`
CertFile string `yaml:"CertFile"`
Enabled bool `yaml:"Enabled"`
Port uint16 `yaml:"Port"`
KeyFile string `yaml:"KeyFile"`
}
)

24
pkg/config/rpc_config_test.go Normal file
View file

@ -0,0 +1,24 @@
package config
import (
"testing"
"github.com/stretchr/testify/require"
"gopkg.in/yaml.v3"
)
// TestRPC_UnmarshalBasicService is aimed to check that BasicService config of
// RPC service can be properly unmarshalled. This test may be removed after
// Address and Port config fields removal.
func TestRPC_UnmarshalBasicService(t *testing.T) {
data := `
Enabled: true
Port: 10332
MaxGasInvoke: 15
`
cfg := &RPC{}
err := yaml.Unmarshal([]byte(data), &cfg)
require.NoError(t, err)
require.True(t, cfg.Enabled)
require.Equal(t, uint16(10332), *cfg.Port)
}

20
pkg/network/discovery_test.go
View file

@ -20,7 +20,8 @@ type fakeTransp struct {
started atomic2.Bool
closed atomic2.Bool
dialCh chan string
addr string
host string
port string
}
type fakeAPeer struct {
@ -45,8 +46,14 @@ func (f *fakeAPeer) Version() *payload.Version {
return f.version
}
func newFakeTransp(s *Server) Transporter {
return &fakeTransp{}
func newFakeTransp(s *Server, addr string) Transporter {
tr := &fakeTransp{}
h, p, err := net.SplitHostPort(addr)
if err == nil {
tr.host = h
tr.port = p
}
return tr
}
func (ft *fakeTransp) Dial(addr string, timeout time.Duration) (AddressablePeer, error) {
@ -62,14 +69,15 @@ func (ft *fakeTransp) Accept() {
if ft.started.Load() {
panic("started twice")
}
ft.addr = net.JoinHostPort("0.0.0.0", "42")
ft.host = "0.0.0.0"
ft.port = "42"
ft.started.Store(true)
}
func (ft *fakeTransp) Proto() string {
return ""
}
func (ft *fakeTransp) Address() string {
return ft.addr
func (ft *fakeTransp) HostPort() (string, string) {
return ft.host, ft.port
}
func (ft *fakeTransp) Close() {
if ft.closed.Load() {

6
pkg/network/helper_test.go
View file

@ -158,7 +158,7 @@ func (p *localPeer) HandleVersion(v *payload.Version) error {
return nil
}
func (p *localPeer) SendVersion() error {
m, err := p.server.getVersionMsg()
m, err := p.server.getVersionMsg(nil)
if err != nil {
return err
}
@ -208,6 +208,10 @@ func newTestServer(t *testing.T, serverConfig ServerConfig) *Server {
}
func newTestServerWithCustomCfg(t *testing.T, serverConfig ServerConfig, protocolCfg func(*config.ProtocolConfiguration)) *Server {
if len(serverConfig.Addresses) == 0 {
// Normally it will be done by ApplicationConfiguration.GetAddresses().
serverConfig.Addresses = []config.AnnounceableAddress{{Address: ":0"}}
}
s, err := newServerFromConstructors(serverConfig, fakechain.NewFakeChainWithCustomCfg(protocolCfg), new(fakechain.FakeStateSync), zaptest.NewLogger(t),
newFakeTransp, newTestDiscovery)
require.NoError(t, err)

84
pkg/network/server.go
View file

@ -97,7 +97,7 @@ type (
// A copy of the Ledger's config.
config config.ProtocolConfiguration
transport Transporter
transports []Transporter
discovery Discoverer
chain Ledger
bQueue *blockQueue
@ -154,13 +154,13 @@ func randomID() uint32 {
// NewServer returns a new Server, initialized with the given configuration.
func NewServer(config ServerConfig, chain Ledger, stSync StateSync, log *zap.Logger) (*Server, error) {
return newServerFromConstructors(config, chain, stSync, log, func(s *Server) Transporter {
return NewTCPTransport(s, net.JoinHostPort(s.ServerConfig.Address, strconv.Itoa(int(s.ServerConfig.Port))), s.log)
return newServerFromConstructors(config, chain, stSync, log, func(s *Server, addr string) Transporter {
return NewTCPTransport(s, addr, s.log)
}, newDefaultDiscovery)
}
func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSync, log *zap.Logger,
newTransport func(*Server) Transporter,
newTransport func(*Server, string) Transporter,
newDiscovery func([]string, time.Duration, Transporter) Discoverer,
) (*Server, error) {
if log == nil {
@ -238,11 +238,20 @@ func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSy
s.BroadcastFactor = defaultBroadcastFactor
}
s.transport = newTransport(s)
if len(s.ServerConfig.Addresses) == 0 {
return nil, errors.New("no bind addresses configured")
}
transports := make([]Transporter, len(s.ServerConfig.Addresses))
for i, addr := range s.ServerConfig.Addresses {
transports[i] = newTransport(s, addr.Address)
}
s.transports = transports
s.discovery = newDiscovery(
s.Seeds,
s.DialTimeout,
s.transport,
// Here we need to pick up a single transporter, it will be used to
// dial, and it doesn't matter which one.
s.transports[0],
)
return s, nil
@ -271,7 +280,9 @@ func (s *Server) Start(errChan chan error) {
go s.relayBlocksLoop()
go s.bQueue.run()
go s.bSyncQueue.run()
go s.transport.Accept()
for _, tr := range s.transports {
go tr.Accept()
}
setServerAndNodeVersions(s.UserAgent, strconv.FormatUint(uint64(s.id), 10))
s.run()
}
@ -280,7 +291,9 @@ func (s *Server) Start(errChan chan error) {
// once stopped the same intance of the Server can't be started again by calling Start.
func (s *Server) Shutdown() {
s.log.Info("shutting down server", zap.Int("peers", s.PeerCount()))
s.transport.Close()
for _, tr := range s.transports {
tr.Close()
}
for _, p := range s.getPeers(nil) {
p.Disconnect(errServerShutdown)
}
@ -600,11 +613,12 @@ func (s *Server) HandshakedPeersCount() int {
return count
}
// getVersionMsg returns the current version message.
func (s *Server) getVersionMsg() (*Message, error) {
port, err := s.Port()
// getVersionMsg returns the current version message generated for the specified
// connection.
func (s *Server) getVersionMsg(localAddr net.Addr) (*Message, error) {
port, err := s.Port(localAddr)
if err != nil {
return nil, err
return nil, fmt.Errorf("failed to fetch server port: %w", err)
}
capabilities := []capability.Capability{
@ -1654,26 +1668,42 @@ func (s *Server) broadcastTxLoop() {
}
}
// Port returns a server port that should be used in P2P version exchange. In
// case `AnnouncedPort` is set in the server.Config, the announced node port
// will be returned (e.g. consider the node running behind NAT). If `AnnouncedPort`
// isn't set, the port returned may still differs from that of server.Config.
func (s *Server) Port() (uint16, error) {
if s.AnnouncedPort != 0 {
return s.ServerConfig.AnnouncedPort, nil
// Port returns a server port that should be used in P2P version exchange with the
// peer connected on the given localAddr. In case if announced node port is set
// in the server.Config for the given bind address, the announced node port will
// be returned (e.g. consider the node running behind NAT). If `AnnouncedPort`
// isn't set, the port returned may still differ from that of server.Config. If
// no localAddr is given, then the first available port will be returned.
func (s *Server) Port(localAddr net.Addr) (uint16, error) {
var connIP string
if localAddr != nil {
connIP, _, _ = net.SplitHostPort(localAddr.String()) // Ignore error and provide info if possible.
}
var port uint16
_, portStr, err := net.SplitHostPort(s.transport.Address())
if err != nil {
port = s.ServerConfig.Port
var defaultPort *uint16
for i, tr := range s.transports {
listenIP, listenPort := tr.HostPort()
if listenIP == "::" || listenIP == "" || localAddr == nil || connIP == "" || connIP == listenIP {
var res uint16
if s.ServerConfig.Addresses[i].AnnouncedPort != 0 {
res = s.ServerConfig.Addresses[i].AnnouncedPort
} else {
p, err := strconv.ParseUint(portStr, 10, 16)
p, err := strconv.ParseUint(listenPort, 10, 16)
if err != nil {
return 0, err
return 0, fmt.Errorf("failed to parse bind port from '%s': %w", listenPort, err)
}
port = uint16(p)
res = uint16(p)
}
return port, nil
if localAddr == nil || // no local address is specified => take the first port available
(listenIP != "::" && listenIP != "") { // direct match is always preferable
return res, nil
}
defaultPort = &res
}
}
if defaultPort != nil {
return *defaultPort, nil
}
return 0, fmt.Errorf("bind address for connection '%s' is not registered", localAddr.String())
}
// optimalNumOfThreads returns the optimal number of processing threads to create

79
pkg/network/server_config.go
View file

@ -1,6 +1,7 @@
package network
import (
"fmt"
"time"
"github.com/nspcc-dev/neo-go/pkg/config"
@ -28,14 +29,8 @@ type (
// The user agent of the server.
UserAgent string
// Address. Example: "localhost".
Address string
// AnnouncedPort is an announced node port for P2P version exchange.
AnnouncedPort uint16
// Port is the actual node port it is bound to. Example: 20332.
Port uint16
// Addresses stores the list of bind addresses for the node.
Addresses []config.AnnounceableAddress
// The network mode the server will operate on.
// ModePrivNet docker private network.
@ -86,34 +81,72 @@ type (
// NewServerConfig creates a new ServerConfig struct
// using the main applications config.
func NewServerConfig(cfg config.Config) ServerConfig {
func NewServerConfig(cfg config.Config) (ServerConfig, error) {
appConfig := cfg.ApplicationConfiguration
protoConfig := cfg.ProtocolConfiguration
timePerBlock := protoConfig.TimePerBlock
if timePerBlock == 0 && protoConfig.SecondsPerBlock > 0 { //nolint:staticcheck // SA1019: protoConfig.SecondsPerBlock is deprecated
timePerBlock = time.Duration(protoConfig.SecondsPerBlock) * time.Second //nolint:staticcheck // SA1019: protoConfig.SecondsPerBlock is deprecated
}
return ServerConfig{
dialTimeout := appConfig.P2P.DialTimeout
if dialTimeout == 0 && appConfig.DialTimeout > 0 { //nolint:staticcheck // SA1019: appConfig.DialTimeout is deprecated
dialTimeout = time.Duration(appConfig.DialTimeout) * time.Second //nolint:staticcheck // SA1019: appConfig.DialTimeout is deprecated
}
protoTickInterval := appConfig.P2P.ProtoTickInterval
if protoTickInterval == 0 && appConfig.ProtoTickInterval > 0 { //nolint:staticcheck // SA1019: appConfig.ProtoTickInterval is deprecated
protoTickInterval = time.Duration(appConfig.ProtoTickInterval) * time.Second //nolint:staticcheck // SA1019: appConfig.ProtoTickInterval is deprecated
}
pingInterval := appConfig.P2P.PingInterval
if pingInterval == 0 && appConfig.PingInterval > 0 { //nolint:staticcheck // SA1019: appConfig.PingInterval is deprecated
pingInterval = time.Duration(appConfig.PingInterval) * time.Second //nolint:staticcheck // SA1019: appConfig.PingInterval is deprecated
}
pingTimeout := appConfig.P2P.PingTimeout
if pingTimeout == 0 && appConfig.PingTimeout > 0 { //nolint:staticcheck // SA1019: appConfig.PingTimeout is deprecated
pingTimeout = time.Duration(appConfig.PingTimeout) * time.Second //nolint:staticcheck // SA1019: appConfig.PingTimeout is deprecated
}
maxPeers := appConfig.P2P.MaxPeers
if maxPeers == 0 && appConfig.MaxPeers > 0 { //nolint:staticcheck // SA1019: appConfig.MaxPeers is deprecated
maxPeers = appConfig.MaxPeers //nolint:staticcheck // SA1019: appConfig.MaxPeers is deprecated
}
attemptConnPeers := appConfig.P2P.AttemptConnPeers
if attemptConnPeers == 0 && appConfig.AttemptConnPeers > 0 { //nolint:staticcheck // SA1019: appConfig.AttemptConnPeers is deprecated
attemptConnPeers = appConfig.AttemptConnPeers //nolint:staticcheck // SA1019: appConfig.AttemptConnPeers is deprecated
}
minPeers := appConfig.P2P.MinPeers
if minPeers == 0 && appConfig.MinPeers > 0 { //nolint:staticcheck // SA1019: appConfig.MinPeers is deprecated
minPeers = appConfig.MinPeers //nolint:staticcheck // SA1019: appConfig.MinPeers is deprecated
}
extPoolSize := appConfig.P2P.ExtensiblePoolSize
if extPoolSize == 0 && appConfig.ExtensiblePoolSize > 0 { //nolint:staticcheck // SA1019: appConfig.ExtensiblePoolSize is deprecated
extPoolSize = appConfig.ExtensiblePoolSize //nolint:staticcheck // SA1019: appConfig.ExtensiblePoolSize is deprecated
}
broadcastFactor := appConfig.P2P.BroadcastFactor
if broadcastFactor > 0 && appConfig.BroadcastFactor > 0 { //nolint:staticcheck // SA1019: appConfig.BroadcastFactor is deprecated
broadcastFactor = appConfig.BroadcastFactor //nolint:staticcheck // SA1019: appConfig.BroadcastFactor is deprecated
}
addrs, err := appConfig.GetAddresses()
if err != nil {
return ServerConfig{}, fmt.Errorf("failed to parse addresses: %w", err)
}
c := ServerConfig{
UserAgent: cfg.GenerateUserAgent(),
Address: appConfig.Address,
AnnouncedPort: appConfig.AnnouncedNodePort,
Port: appConfig.NodePort,
Addresses: addrs,
Net: protoConfig.Magic,
Relay: appConfig.Relay,
Seeds: protoConfig.SeedList,
DialTimeout: time.Duration(appConfig.DialTimeout) * time.Second,
ProtoTickInterval: time.Duration(appConfig.ProtoTickInterval) * time.Second,
PingInterval: time.Duration(appConfig.PingInterval) * time.Second,
PingTimeout: time.Duration(appConfig.PingTimeout) * time.Second,
MaxPeers: appConfig.MaxPeers,
AttemptConnPeers: appConfig.AttemptConnPeers,
MinPeers: appConfig.MinPeers,
DialTimeout: dialTimeout,
ProtoTickInterval: protoTickInterval,
PingInterval: pingInterval,
PingTimeout: pingTimeout,
MaxPeers: maxPeers,
AttemptConnPeers: attemptConnPeers,
MinPeers: minPeers,
TimePerBlock: timePerBlock,
OracleCfg: appConfig.Oracle,
P2PNotaryCfg: appConfig.P2PNotary,
StateRootCfg: appConfig.StateRoot,
ExtensiblePoolSize: appConfig.ExtensiblePoolSize,
BroadcastFactor: appConfig.BroadcastFactor,
ExtensiblePoolSize: extPoolSize,
BroadcastFactor: broadcastFactor,
}
return c, nil
}

55
pkg/network/server_test.go
View file

@ -104,13 +104,13 @@ func TestServerStartAndShutdown(t *testing.T) {
s.register <- p
require.Eventually(t, func() bool { return 1 == s.PeerCount() }, time.Second, time.Millisecond*10)
assert.True(t, s.transport.(*fakeTransp).started.Load())
assert.True(t, s.transports[0].(*fakeTransp).started.Load())
assert.Nil(t, s.txCallback)
s.Shutdown()
<-ch
require.True(t, s.transport.(*fakeTransp).closed.Load())
require.True(t, s.transports[0].(*fakeTransp).closed.Load())
err, ok := p.droppedWith.Load().(error)
require.True(t, ok)
require.True(t, errors.Is(err, errServerShutdown))
@ -191,7 +191,7 @@ func TestGetBlocksByIndex(t *testing.T) {
}
func testGetBlocksByIndex(t *testing.T, cmd CommandType) {
s := newTestServer(t, ServerConfig{Port: 0, UserAgent: "/test/"})
s := newTestServer(t, ServerConfig{UserAgent: "/test/"})
start := s.chain.BlockHeight()
if cmd == CMDGetHeaders {
start = s.chain.HeaderHeight()
@ -217,7 +217,7 @@ func testGetBlocksByIndex(t *testing.T, cmd CommandType) {
expectsCmd[i] = cmd
expectedHeight[i] = []uint32{start + 1}
}
go s.transport.Accept()
go s.transports[0].Accept()
nonce := uint32(0)
checkPingRespond := func(t *testing.T, peerIndex int, peerHeight uint32, hs ...uint32) {
@ -250,16 +250,15 @@ func testGetBlocksByIndex(t *testing.T, cmd CommandType) {
func TestSendVersion(t *testing.T) {
var (
s = newTestServer(t, ServerConfig{Port: 0, UserAgent: "/test/"})
s = newTestServer(t, ServerConfig{UserAgent: "/test/"})
p = newLocalPeer(t, s)
)
// we need to set listener at least to handle dynamic port correctly
s.transport.Accept()
s.transports[0].Accept()
p.messageHandler = func(t *testing.T, msg *Message) {
// listener is already set, so Address() gives us proper address with port
_, p, err := net.SplitHostPort(s.transport.Address())
assert.NoError(t, err)
port, err := strconv.ParseUint(p, 10, 16)
// listener is already set, so Addresses(nil) gives us proper address with port
_, prt := s.transports[0].HostPort()
port, err := strconv.ParseUint(prt, 10, 16)
assert.NoError(t, err)
assert.Equal(t, CMDVersion, msg.Command)
assert.IsType(t, msg.Payload, &payload.Version{})
@ -390,7 +389,7 @@ func (s *Server) testHandleMessage(t *testing.T, p Peer, cmd CommandType, pl pay
func startTestServer(t *testing.T, protocolCfg ...func(*config.ProtocolConfiguration)) *Server {
var s *Server
srvCfg := ServerConfig{Port: 0, UserAgent: "/test/"}
srvCfg := ServerConfig{UserAgent: "/test/"}
if protocolCfg != nil {
s = newTestServerWithCustomCfg(t, srvCfg, protocolCfg[0])
} else {
@ -849,7 +848,7 @@ func TestHandleMPTData(t *testing.T) {
t.Run("good", func(t *testing.T) {
expected := [][]byte{{1, 2, 3}, {2, 3, 4}}
s := newTestServer(t, ServerConfig{Port: 0, UserAgent: "/test/"})
s := newTestServer(t, ServerConfig{UserAgent: "/test/"})
s.config.P2PStateExchangeExtensions = true
s.stateSync = &fakechain.FakeStateSync{
AddMPTNodesFunc: func(nodes [][]byte) error {
@ -1044,7 +1043,7 @@ func TestVerifyNotaryRequest(t *testing.T) {
bc := fakechain.NewFakeChain()
bc.MaxVerificationGAS = 10
bc.NotaryContractScriptHash = util.Uint160{1, 2, 3}
s, err := newServerFromConstructors(ServerConfig{}, bc, new(fakechain.FakeStateSync), zaptest.NewLogger(t), newFakeTransp, newTestDiscovery)
s, err := newServerFromConstructors(ServerConfig{Addresses: []config.AnnounceableAddress{{Address: ":0"}}}, bc, new(fakechain.FakeStateSync), zaptest.NewLogger(t), newFakeTransp, newTestDiscovery)
require.NoError(t, err)
newNotaryRequest := func() *payload.P2PNotaryRequest {
return &payload.P2PNotaryRequest{
@ -1123,3 +1122,33 @@ func TestTryInitStateSync(t *testing.T) {
s.tryInitStateSync()
})
}
func TestServer_Port(t *testing.T) {
s := newTestServer(t, ServerConfig{
Addresses: []config.AnnounceableAddress{
{Address: "1.2.3.4:10"}, // some random address
{Address: ":1"}, // listen all IPs
{Address: "127.0.0.1:2"}, // address without announced port
{Address: "123.123.0.123:3", AnnouncedPort: 123}}, // address with announced port
})
// Default addr => first port available
actual, err := s.Port(nil)
require.NoError(t, err)
require.Equal(t, uint16(10), actual)
// Specified address with direct match => port of matched address
actual, err = s.Port(&net.TCPAddr{IP: net.IPv4(127, 0, 0, 1), Port: 123})
require.NoError(t, err)
require.Equal(t, uint16(2), actual)
// No address match => 0.0.0.0's port
actual, err = s.Port(&net.TCPAddr{IP: net.IPv4(5, 6, 7, 8), Port: 123})
require.NoError(t, err)
require.Equal(t, uint16(1), actual)
// Specified address with match on announceable address => announced port
actual, err = s.Port(&net.TCPAddr{IP: net.IPv4(123, 123, 0, 123), Port: 123})
require.NoError(t, err)
require.Equal(t, uint16(123), actual)
}

2
pkg/network/tcp_peer.go
View file

@ -307,7 +307,7 @@ func (p *TCPPeer) IsFullNode() bool {
// SendVersion checks for the handshake state and sends a message to the peer.
func (p *TCPPeer) SendVersion() error {
msg, err := p.server.getVersionMsg()
msg, err := p.server.getVersionMsg(p.conn.LocalAddr())
if err != nil {
return err
}

2
pkg/network/tcp_peer_test.go
View file

@ -19,7 +19,9 @@ func TestPeerHandshake(t *testing.T) {
server, client := net.Pipe()
tcpS := NewTCPPeer(server, "", newTestServer(t, ServerConfig{}))
tcpS.server.transports[0].Accept() // properly initialize the address list
tcpC := NewTCPPeer(client, "", newTestServer(t, ServerConfig{}))
tcpC.server.transports[0].Accept()
// Something should read things written into the pipe.
go connReadStub(tcpS.conn)

29
pkg/network/tcp_transport.go
View file

@ -15,17 +15,32 @@ type TCPTransport struct {
server *Server
listener net.Listener
bindAddr string
hostPort hostPort
lock sync.RWMutex
quit bool
}
type hostPort struct {
Host string
Port string
}
// NewTCPTransport returns a new TCPTransport that will listen for
// new incoming peer connections.
func NewTCPTransport(s *Server, bindAddr string, log *zap.Logger) *TCPTransport {
host, port, err := net.SplitHostPort(bindAddr)
if err != nil {
// Only host can be provided, it's OK.
host = bindAddr
}
return &TCPTransport{
log: log,
server: s,
bindAddr: bindAddr,
hostPort: hostPort{
Host: host,
Port: port,
},
}
}
@ -55,6 +70,8 @@ func (t *TCPTransport) Accept() {
return
}
t.listener = l
t.bindAddr = l.Addr().String()
t.hostPort.Host, t.hostPort.Port, _ = net.SplitHostPort(t.bindAddr) // no error expected as l.Addr() is a valid address.
t.lock.Unlock()
for {
@ -66,7 +83,7 @@ func (t *TCPTransport) Accept() {
if errors.Is(err, net.ErrClosed) && quit {
break
}
t.log.Warn("TCP accept error", zap.Error(err))
t.log.Warn("TCP accept error", zap.String("address", l.Addr().String()), zap.Error(err))
continue
}
p := NewTCPPeer(conn, "", t.server)
@ -89,12 +106,10 @@ func (t *TCPTransport) Proto() string {
return "tcp"
}
// Address implements the Transporter interface.
func (t *TCPTransport) Address() string {
// HostPort implements the Transporter interface.
func (t *TCPTransport) HostPort() (string, string) {
t.lock.RLock()
defer t.lock.RUnlock()
if t.listener != nil {
return t.listener.Addr().String()
}
return ""
return t.hostPort.Host, t.hostPort.Port
}

2
pkg/network/transport.go
View file

@ -8,6 +8,6 @@ type Transporter interface {
Dial(addr string, timeout time.Duration) (AddressablePeer, error)
Accept()
Proto() string
Address() string
HostPort() (string, string)
Close()
}

54
pkg/services/metrics/metrics.go
View file

@ -3,31 +3,62 @@ package metrics
import (
"context"
"errors"
"fmt"
"net"
"net/http"
"github.com/nspcc-dev/neo-go/pkg/config"
"go.uber.org/atomic"
"go.uber.org/zap"
)
// Service serves metrics.
type Service struct {
*http.Server
http []*http.Server
config config.BasicService
log *zap.Logger
serviceType string
started *atomic.Bool
}
// NewService configures logger and returns new service instance.
func NewService(name string, httpServers []*http.Server, cfg config.BasicService, log *zap.Logger) *Service {
return &Service{
http: httpServers,
config: cfg,
serviceType: name,
log: log.With(zap.String("service", name)),
started: atomic.NewBool(false),
}
}
// Start runs http service with the exposed endpoint on the configured port.
func (ms *Service) Start() {
func (ms *Service) Start() error {
if ms.config.Enabled {
ms.log.Info("service is running", zap.String("endpoint", ms.Addr))
err := ms.ListenAndServe()
if err != nil && !errors.Is(err, http.ErrServerClosed) {
ms.log.Warn("service couldn't start on configured port")
if !ms.started.CAS(false, true) {
ms.log.Info("service already started")
return nil
}
for _, srv := range ms.http {
ms.log.Info("starting service", zap.String("endpoint", srv.Addr))
ln, err := net.Listen("tcp", srv.Addr)
if err != nil {
return fmt.Errorf("failed to listen on %s: %w", srv.Addr, err)
}
srv.Addr = ln.Addr().String() // set Addr to the actual address
go func(s *http.Server) {
err = s.Serve(ln)
if !errors.Is(err, http.ErrServerClosed) {
ms.log.Error("failed to start service", zap.String("endpoint", s.Addr), zap.Error(err))
}
}(srv)
}
} else {
ms.log.Info("service hasn't started since it's disabled")
}
return nil
}
// ShutDown stops the service.
@ -35,9 +66,14 @@ func (ms *Service) ShutDown() {
if !ms.config.Enabled {
return
}
ms.log.Info("shutting down service", zap.String("endpoint", ms.Addr))
err := ms.Shutdown(context.Background())
if !ms.started.CAS(true, false) {
return
}
for _, srv := range ms.http {
ms.log.Info("shutting down service", zap.String("endpoint", srv.Addr))
err := srv.Shutdown(context.Background())
if err != nil {
ms.log.Error("can't shut service down", zap.Error(err))
ms.log.Error("can't shut service down", zap.String("endpoint", srv.Addr), zap.Error(err))
}
}
}

14
pkg/services/metrics/pprof.go
View file

@ -24,13 +24,13 @@ func NewPprofService(cfg config.BasicService, log *zap.Logger) *Service {
handler.HandleFunc("/debug/pprof/symbol", pprof.Symbol)
handler.HandleFunc("/debug/pprof/trace", pprof.Trace)
return &Service{
Server: &http.Server{
Addr: cfg.Address + ":" + cfg.Port,
addrs := cfg.GetAddresses()
srvs := make([]*http.Server, len(addrs))
for i, addr := range addrs {
srvs[i] = &http.Server{
Addr: addr,
Handler: handler,
},
config: cfg,
serviceType: "Pprof",
log: log.With(zap.String("service", "Pprof")),
}
}
return NewService("Pprof", srvs, cfg, log)
}

16
pkg/services/metrics/prometheus.go
View file

@ -17,13 +17,13 @@ func NewPrometheusService(cfg config.BasicService, log *zap.Logger) *Service {
return nil
}
return &Service{
Server: &http.Server{
Addr: cfg.Address + ":" + cfg.Port,
Handler: promhttp.Handler(),
},
config: cfg,
serviceType: "Prometheus",
log: log.With(zap.String("service", "Prometheus")),
addrs := cfg.GetAddresses()
srvs := make([]*http.Server, len(addrs))
for i, addr := range addrs {
srvs[i] = &http.Server{
Addr: addr,
Handler: promhttp.Handler(), // share metrics between multiple prometheus handlers
}
}
return NewService("Prometheus", srvs, cfg, log)
}

5
pkg/services/rpcsrv/client_test.go
View file

@ -1923,9 +1923,10 @@ func TestClient_Iterator_SessionConfigVariations(t *testing.T) {
cfg.ApplicationConfiguration.RPC.SessionEnabled = true
cfg.ApplicationConfiguration.RPC.SessionBackedByMPT = true
})
serverConfig := network.NewServerConfig(cfg)
serverConfig, err := network.NewServerConfig(cfg)
require.NoError(t, err)
serverConfig.UserAgent = fmt.Sprintf(config.UserAgentFormat, "0.98.6-test")
serverConfig.Port = 0
serverConfig.Addresses = []config.AnnounceableAddress{{Address: ":0"}}
server, err := network.NewServer(serverConfig, chain, chain.GetStateSyncModule(), logger)
require.NoError(t, err)
errCh := make(chan error, 2)

118
pkg/services/rpcsrv/server.go
View file

@ -117,7 +117,9 @@ type (
// Server represents the JSON-RPC 2.0 server.
Server struct {
*http.Server
http []*http.Server
https []*http.Server
chain Ledger
config config.RPC
// wsReadLimit represents web-socket message limit for a receiving side.
@ -128,7 +130,6 @@ type (
coreServer *network.Server
oracle *atomic.Value
log *zap.Logger
https *http.Server
shutdown chan struct{}
started *atomic.Bool
errChan chan error
@ -254,14 +255,22 @@ var invalidBlockHeightError = func(index int, height int) *neorpc.Error {
// New creates a new Server struct.
func New(chain Ledger, conf config.RPC, coreServer *network.Server,
orc OracleHandler, log *zap.Logger, errChan chan error) Server {
httpServer := &http.Server{
Addr: conf.Address + ":" + strconv.FormatUint(uint64(conf.Port), 10),
addrs := conf.GetAddresses()
httpServers := make([]*http.Server, len(addrs))
for i, addr := range addrs {
httpServers[i] = &http.Server{
Addr: addr,
}
}
var tlsServer *http.Server
var tlsServers []*http.Server
if cfg := conf.TLSConfig; cfg.Enabled {
tlsServer = &http.Server{
Addr: net.JoinHostPort(cfg.Address, strconv.FormatUint(uint64(cfg.Port), 10)),
addrs := cfg.GetAddresses()
tlsServers = make([]*http.Server, len(addrs))
for i, addr := range addrs {
tlsServers[i] = &http.Server{
Addr: addr,
}
}
}
@ -289,7 +298,9 @@ func New(chain Ledger, conf config.RPC, coreServer *network.Server,
wsOriginChecker = func(_ *http.Request) bool { return true }
}
return Server{
Server: httpServer,
http: httpServers,
https: tlsServers,
chain: chain,
config: conf,
wsReadLimit: int64(protoCfg.MaxBlockSize*4)/3 + 1024, // Enough for Base64-encoded content of `submitblock` and `submitp2pnotaryrequest`.
@ -299,7 +310,6 @@ func New(chain Ledger, conf config.RPC, coreServer *network.Server,
coreServer: coreServer,
log: log,
oracle: oracleWrapped,
https: tlsServer,
shutdown: make(chan struct{}),
started: atomic.NewBool(false),
errChan: errChan,
@ -333,40 +343,48 @@ func (s *Server) Start() {
s.log.Info("RPC server already started")
return
}
s.Handler = http.HandlerFunc(s.handleHTTPRequest)
s.log.Info("starting rpc-server", zap.String("endpoint", s.Addr))
for _, srv := range s.http {
srv.Handler = http.HandlerFunc(s.handleHTTPRequest)
s.log.Info("starting rpc-server", zap.String("endpoint", srv.Addr))
go s.handleSubEvents()
if cfg := s.config.TLSConfig; cfg.Enabled {
s.https.Handler = http.HandlerFunc(s.handleHTTPRequest)
s.log.Info("starting rpc-server (https)", zap.String("endpoint", s.https.Addr))
go func() {
ln, err := net.Listen("tcp", s.https.Addr)
ln, err := net.Listen("tcp", srv.Addr)
if err != nil {
s.errChan <- err
s.errChan <- fmt.Errorf("failed to listen on %s: %w", srv.Addr, err)
return
}
s.https.Addr = ln.Addr().String()
err = s.https.ServeTLS(ln, cfg.CertFile, cfg.KeyFile)
if !errors.Is(err, http.ErrServerClosed) {
s.log.Error("failed to start TLS RPC server", zap.Error(err))
s.errChan <- err
}
}()
}
ln, err := net.Listen("tcp", s.Addr)
if err != nil {
s.errChan <- err
return
}
s.Addr = ln.Addr().String() // set Addr to the actual address
go func() {
err = s.Serve(ln)
srv.Addr = ln.Addr().String() // set Addr to the actual address
go func(server *http.Server) {
err = server.Serve(ln)
if !errors.Is(err, http.ErrServerClosed) {
s.log.Error("failed to start RPC server", zap.Error(err))
s.errChan <- err
}
}()
}(srv)
}
go s.handleSubEvents()
if cfg := s.config.TLSConfig; cfg.Enabled {
for _, srv := range s.https {
srv.Handler = http.HandlerFunc(s.handleHTTPRequest)
s.log.Info("starting rpc-server (https)", zap.String("endpoint", srv.Addr))
ln, err := net.Listen("tcp", srv.Addr)
if err != nil {
s.errChan <- err
return
}
srv.Addr = ln.Addr().String()
go func(srv *http.Server) {
err = srv.ServeTLS(ln, cfg.CertFile, cfg.KeyFile)
if !errors.Is(err, http.ErrServerClosed) {
s.log.Error("failed to start TLS RPC server",
zap.String("endpoint", srv.Addr), zap.Error(err))
s.errChan <- err
}
}(srv)
}
}
}
// Shutdown stops the RPC server if it's running. It can only be called once,
@ -381,17 +399,23 @@ func (s *Server) Shutdown() {
close(s.shutdown)
if s.config.TLSConfig.Enabled {
s.log.Info("shutting down RPC server (https)", zap.String("endpoint", s.https.Addr))
err := s.https.Shutdown(context.Background())
for _, srv := range s.https {
s.log.Info("shutting down RPC server (https)", zap.String("endpoint", srv.Addr))
err := srv.Shutdown(context.Background())
if err != nil {
s.log.Warn("error during RPC (https) server shutdown", zap.Error(err))
s.log.Warn("error during RPC (https) server shutdown",
zap.String("endpoint", srv.Addr), zap.Error(err))
}
}
}
s.log.Info("shutting down RPC server", zap.String("endpoint", s.Addr))
err := s.Server.Shutdown(context.Background())
for _, srv := range s.http {
s.log.Info("shutting down RPC server", zap.String("endpoint", srv.Addr))
err := srv.Shutdown(context.Background())
if err != nil {
s.log.Warn("error during RPC (http) server shutdown", zap.Error(err))
s.log.Warn("error during RPC (http) server shutdown",
zap.String("endpoint", srv.Addr), zap.Error(err))
}
}
// Perform sessions finalisation.
@ -693,7 +717,7 @@ func (s *Server) getBlockHash(reqParams params.Params) (interface{}, *neorpc.Err
}
func (s *Server) getVersion(_ params.Params) (interface{}, *neorpc.Error) {
port, err := s.coreServer.Port()
port, err := s.coreServer.Port(nil) // any port will suite
if err != nil {
return nil, neorpc.NewInternalServerError(fmt.Sprintf("cannot fetch tcp port: %s", err))
}
@ -2790,3 +2814,13 @@ func escapeForLog(in string) string {
return c
}, in)
}
// Addresses returns the list of addresses RPC server is listening to in the form of
// address:port.
func (s *Server) Addresses() []string {
res := make([]string, len(s.http))
for i, srv := range s.http {
res[i] = srv.Addr
}
return res
}

5
pkg/services/rpcsrv/server_helper_test.go
View file

@ -116,9 +116,10 @@ func initClearServerWithServices(t testing.TB, needOracle bool, needNotary bool,
}
func wrapUnitTestChain(t testing.TB, chain *core.Blockchain, orc *oracle.Oracle, cfg config.Config, logger *zap.Logger) (*core.Blockchain, *Server, *httptest.Server) {
serverConfig := network.NewServerConfig(cfg)
serverConfig, err := network.NewServerConfig(cfg)
require.NoError(t, err)
serverConfig.UserAgent = fmt.Sprintf(config.UserAgentFormat, "0.98.6-test")
serverConfig.Port = 0
serverConfig.Addresses = []config.AnnounceableAddress{{Address: ":0"}}
server, err := network.NewServer(serverConfig, chain, chain.GetStateSyncModule(), logger)
require.NoError(t, err)
errCh := make(chan error, 2)

3
pkg/services/rpcsrv/server_test.go
View file

@ -3278,7 +3278,8 @@ func TestEscapeForLog(t *testing.T) {
func BenchmarkHandleIn(b *testing.B) {
chain, orc, cfg, logger := getUnitTestChain(b, false, false, false)
serverConfig := network.NewServerConfig(cfg)
serverConfig, err := network.NewServerConfig(cfg)
require.NoError(b, err)
serverConfig.UserAgent = fmt.Sprintf(config.UserAgentFormat, "0.98.6-test")
serverConfig.LogLevel = zapcore.FatalLevel
server, err := network.NewServer(serverConfig, chain, chain.GetStateSyncModule(), logger)