diff --git a/config/protocol.mainnet.yml b/config/protocol.mainnet.yml
index 5325d6afe..b511485ec 100644
--- a/config/protocol.mainnet.yml
+++ b/config/protocol.mainnet.yml
@@ -69,7 +69,7 @@ ApplicationConfiguration:
   PingTimeout: 90
   MaxPeers: 100
   AttemptConnPeers: 20
-  MinPeers: 5
+  MinPeers: 10
   Oracle:
     Enabled: false
     AllowedContentTypes:
diff --git a/config/protocol.testnet.yml b/config/protocol.testnet.yml
index c5cc9ec0f..30696bc06 100644
--- a/config/protocol.testnet.yml
+++ b/config/protocol.testnet.yml
@@ -72,7 +72,7 @@ ApplicationConfiguration:
   PingTimeout: 90
   MaxPeers: 100
   AttemptConnPeers: 20
-  MinPeers: 5
+  MinPeers: 10
   Oracle:
     Enabled: false
     AllowedContentTypes:
diff --git a/docs/node-configuration.md b/docs/node-configuration.md
index fc4fb9340..453b6fa5b 100644
--- a/docs/node-configuration.md
+++ b/docs/node-configuration.md
@@ -19,6 +19,7 @@ node-related settings described in the table below.
 | Address | `string` | `0.0.0.0` | Node address that P2P protocol handler binds to. |
 | AnnouncedPort | `uint16` | Same as `NodePort` | Node port which should be used to announce node's port on P2P layer, it can differ from the `NodePort` the node is bound to (for example, if your node is behind NAT). |
 | AttemptConnPeers | `int` | `20` | Number of connection to try to establish when the connection count drops below the `MinPeers` value.|
+| BroadcastFactor | `int` | `0` | Multiplier that is used to determine the number of optimal gossip fan-out peer number for broadcasted messages (0-100). By default it's zero, node uses the most optimized value depending on the estimated network size (`2.5×log(size)`), so the node may have 20 peers and calculate that it needs to broadcast messages to just 10 of them. With BroadcastFactor set to 100 it will always send messages to all peers, any value in-between 0 and 100 is used for weighted calculation, for example if it's 30 then 13 neighbors will be used in the previous case. |
 | DBConfiguration | [DB Configuration](#DB-Configuration) |  | Describes configuration for database. See the [DB Configuration](#DB-Configuration) section for details. |
 | DialTimeout | `int64` | `0` | Maximum duration a single dial may take in seconds. |
 | ExtensiblePoolSize | `int` | `20` | Maximum amount of the extensible payloads from a single sender stored in a local pool. |
diff --git a/pkg/config/application_config.go b/pkg/config/application_config.go
index ac6db77af..bee9d461f 100644
--- a/pkg/config/application_config.go
+++ b/pkg/config/application_config.go
@@ -6,9 +6,11 @@ import (
 
 // ApplicationConfiguration config specific to the node.
 type ApplicationConfiguration struct {
-	Address           string                   `yaml:"Address"`
-	AnnouncedNodePort uint16                   `yaml:"AnnouncedPort"`
-	AttemptConnPeers  int                      `yaml:"AttemptConnPeers"`
+	Address           string `yaml:"Address"`
+	AnnouncedNodePort uint16 `yaml:"AnnouncedPort"`
+	AttemptConnPeers  int    `yaml:"AttemptConnPeers"`
+	// BroadcastFactor is the factor (0-100) controlling gossip fan-out number optimization.
+	BroadcastFactor   int                      `yaml:"BroadcastFactor"`
 	DBConfiguration   dbconfig.DBConfiguration `yaml:"DBConfiguration"`
 	DialTimeout       int64                    `yaml:"DialTimeout"`
 	LogPath           string                   `yaml:"LogPath"`
@@ -36,6 +38,7 @@ func (a *ApplicationConfiguration) EqualsButServices(o *ApplicationConfiguration
 	if a.Address != o.Address ||
 		a.AnnouncedNodePort != o.AnnouncedNodePort ||
 		a.AttemptConnPeers != o.AttemptConnPeers ||
+		a.BroadcastFactor != o.BroadcastFactor ||
 		a.DBConfiguration != o.DBConfiguration ||
 		a.DialTimeout != o.DialTimeout ||
 		a.ExtensiblePoolSize != o.ExtensiblePoolSize ||
diff --git a/pkg/network/discovery.go b/pkg/network/discovery.go
index e6580139d..cb4e32555 100644
--- a/pkg/network/discovery.go
+++ b/pkg/network/discovery.go
@@ -1,14 +1,16 @@
 package network
 
 import (
+	"math"
 	"sync"
+	"sync/atomic"
 	"time"
 
 	"github.com/nspcc-dev/neo-go/pkg/network/capability"
 )
 
 const (
-	maxPoolSize = 200
+	maxPoolSize = 10000
 	connRetries = 3
 )
 
@@ -16,7 +18,8 @@ const (
 // a healthy connection pool.
 type Discoverer interface {
 	BackFill(...string)
-	Close()
+	GetFanOut() int
+	NetworkSize() int
 	PoolCount() int
 	RequestRemote(int)
 	RegisterBadAddr(string)
@@ -39,17 +42,15 @@ type DefaultDiscovery struct {
 	seeds            []string
 	transport        Transporter
 	lock             sync.RWMutex
-	closeMtx         sync.RWMutex
 	dialTimeout      time.Duration
 	badAddrs         map[string]bool
 	connectedAddrs   map[string]bool
 	goodAddrs        map[string]capability.Capabilities
 	unconnectedAddrs map[string]int
 	attempted        map[string]bool
-	isDead           bool
+	optimalFanOut    int32
+	networkSize      int32
 	requestCh        chan int
-	pool             chan string
-	runExit          chan struct{}
 }
 
 // NewDefaultDiscovery returns a new DefaultDiscovery.
@@ -64,10 +65,7 @@ func NewDefaultDiscovery(addrs []string, dt time.Duration, ts Transporter) *Defa
 		unconnectedAddrs: make(map[string]int),
 		attempted:        make(map[string]bool),
 		requestCh:        make(chan int),
-		pool:             make(chan string, maxPoolSize),
-		runExit:          make(chan struct{}),
 	}
-	go d.run()
 	return d
 }
 
@@ -79,54 +77,92 @@ func newDefaultDiscovery(addrs []string, dt time.Duration, ts Transporter) Disco
 // the pool with the given addresses.
 func (d *DefaultDiscovery) BackFill(addrs ...string) {
 	d.lock.Lock()
+	d.backfill(addrs...)
+	d.lock.Unlock()
+}
+
+func (d *DefaultDiscovery) backfill(addrs ...string) {
 	for _, addr := range addrs {
 		if d.badAddrs[addr] || d.connectedAddrs[addr] ||
 			d.unconnectedAddrs[addr] > 0 {
 			continue
 		}
-		d.unconnectedAddrs[addr] = connRetries
 		d.pushToPoolOrDrop(addr)
 	}
-	d.lock.Unlock()
+	d.updateNetSize()
 }
 
 // PoolCount returns the number of the available node addresses.
 func (d *DefaultDiscovery) PoolCount() int {
-	return len(d.pool)
+	d.lock.RLock()
+	defer d.lock.RUnlock()
+	return d.poolCount()
+}
+
+func (d *DefaultDiscovery) poolCount() int {
+	return len(d.unconnectedAddrs)
 }
 
 // pushToPoolOrDrop tries to push the address given into the pool, but if the pool
 // is already full, it just drops it.
 func (d *DefaultDiscovery) pushToPoolOrDrop(addr string) {
-	select {
-	case d.pool <- addr:
-		updatePoolCountMetric(d.PoolCount())
-		// ok, queued
-	default:
-		// whatever
+	if len(d.unconnectedAddrs) < maxPoolSize {
+		d.unconnectedAddrs[addr] = connRetries
 	}
 }
 
 // RequestRemote tries to establish a connection with n nodes.
-func (d *DefaultDiscovery) RequestRemote(n int) {
-	d.closeMtx.RLock()
-	if !d.isDead {
-		d.requestCh <- n
+func (d *DefaultDiscovery) RequestRemote(requested int) {
+	for ; requested > 0; requested-- {
+		var nextAddr string
+		d.lock.Lock()
+		for addr := range d.unconnectedAddrs {
+			if !d.connectedAddrs[addr] && !d.attempted[addr] {
+				nextAddr = addr
+				break
+			}
+		}
+
+		if nextAddr == "" {
+			// Empty pool, try seeds.
+			for _, addr := range d.seeds {
+				if !d.connectedAddrs[addr] && !d.attempted[addr] {
+					nextAddr = addr
+					break
+				}
+			}
+		}
+		if nextAddr == "" {
+			d.lock.Unlock()
+			// The pool is empty, but all seed nodes are already connected (or attempted),
+			// we can end up in an infinite loop here, so drop the request.
+			break
+		}
+		d.attempted[nextAddr] = true
+		d.lock.Unlock()
+		go d.tryAddress(nextAddr)
 	}
-	d.closeMtx.RUnlock()
 }
 
 // RegisterBadAddr registers the given address as a bad address.
 func (d *DefaultDiscovery) RegisterBadAddr(addr string) {
+	var isSeed bool
 	d.lock.Lock()
-	d.unconnectedAddrs[addr]--
-	if d.unconnectedAddrs[addr] > 0 {
-		d.pushToPoolOrDrop(addr)
-	} else {
-		d.badAddrs[addr] = true
-		delete(d.unconnectedAddrs, addr)
-		delete(d.goodAddrs, addr)
+	for _, seed := range d.seeds {
+		if addr == seed {
+			isSeed = true
+			break
+		}
 	}
+	if !isSeed {
+		d.unconnectedAddrs[addr]--
+		if d.unconnectedAddrs[addr] <= 0 {
+			d.badAddrs[addr] = true
+			delete(d.unconnectedAddrs, addr)
+			delete(d.goodAddrs, addr)
+		}
+	}
+	d.updateNetSize()
 	d.lock.Unlock()
 }
 
@@ -181,6 +217,7 @@ func (d *DefaultDiscovery) RegisterGoodAddr(s string, c capability.Capabilities)
 func (d *DefaultDiscovery) UnregisterConnectedAddr(s string) {
 	d.lock.Lock()
 	delete(d.connectedAddrs, s)
+	d.backfill(s)
 	d.lock.Unlock()
 }
 
@@ -189,9 +226,34 @@ func (d *DefaultDiscovery) RegisterConnectedAddr(addr string) {
 	d.lock.Lock()
 	delete(d.unconnectedAddrs, addr)
 	d.connectedAddrs[addr] = true
+	d.updateNetSize()
 	d.lock.Unlock()
 }
 
+// GetFanOut returns the optimal number of nodes to broadcast packets to.
+func (d *DefaultDiscovery) GetFanOut() int {
+	return int(atomic.LoadInt32(&d.optimalFanOut))
+}
+
+// NetworkSize returns the estimated network size.
+func (d *DefaultDiscovery) NetworkSize() int {
+	return int(atomic.LoadInt32(&d.networkSize))
+}
+
+// updateNetSize updates network size estimation metric. Must be called under read lock.
+func (d *DefaultDiscovery) updateNetSize() {
+	var netsize = len(d.connectedAddrs) + len(d.unconnectedAddrs) + 1 // 1 for the node itself.
+	var fanOut = 2.5 * math.Log(float64(netsize-1))                   // -1 for the number of potential peers.
+	if netsize == 2 {                                                 // log(1) == 0.
+		fanOut = 1 // But we still want to push messages to the peer.
+	}
+
+	atomic.StoreInt32(&d.optimalFanOut, int32(fanOut+0.5)) // Truncating conversion, hence +0.5.
+	atomic.StoreInt32(&d.networkSize, int32(netsize))
+	updateNetworkSizeMetric(netsize)
+	updatePoolCountMetric(d.poolCount())
+}
+
 func (d *DefaultDiscovery) tryAddress(addr string) {
 	err := d.transport.Dial(addr, d.dialTimeout)
 	d.lock.Lock()
@@ -202,76 +264,3 @@ func (d *DefaultDiscovery) tryAddress(addr string) {
 		d.RequestRemote(1)
 	}
 }
-
-// Close stops discoverer pool processing, which makes the discoverer almost useless.
-func (d *DefaultDiscovery) Close() {
-	d.closeMtx.Lock()
-	d.isDead = true
-	d.closeMtx.Unlock()
-	select {
-	case <-d.requestCh: // Drain the channel if there is anything there.
-	default:
-	}
-	close(d.requestCh)
-	<-d.runExit
-}
-
-// run is a goroutine that makes DefaultDiscovery process its queue to connect
-// to other nodes.
-func (d *DefaultDiscovery) run() {
-	var requested, oldRequest, r int
-	var ok bool
-
-	for {
-		if requested == 0 {
-			requested, ok = <-d.requestCh
-		}
-		oldRequest = requested
-		for ok && requested > 0 {
-			select {
-			case r, ok = <-d.requestCh:
-				if requested <= r {
-					requested = r
-				}
-			case addr := <-d.pool:
-				updatePoolCountMetric(d.PoolCount())
-				d.lock.Lock()
-				if !d.connectedAddrs[addr] && !d.attempted[addr] {
-					d.attempted[addr] = true
-					go d.tryAddress(addr)
-					requested--
-				}
-				d.lock.Unlock()
-			default: // Empty pool
-				var added int
-				d.lock.Lock()
-				for _, addr := range d.seeds {
-					if !d.connectedAddrs[addr] {
-						delete(d.badAddrs, addr)
-						d.unconnectedAddrs[addr] = connRetries
-						d.pushToPoolOrDrop(addr)
-						added++
-					}
-				}
-				d.lock.Unlock()
-				// The pool is empty, but all seed nodes are already connected,
-				// we can end up in an infinite loop here, so drop the request.
-				if added == 0 {
-					requested = 0
-				}
-			}
-		}
-		if !ok {
-			break
-		}
-		// Special case, no connections after all attempts.
-		d.lock.RLock()
-		connected := len(d.connectedAddrs)
-		d.lock.RUnlock()
-		if connected == 0 {
-			time.Sleep(d.dialTimeout)
-			requested = oldRequest
-		}
-	}
-	close(d.runExit)
-}
diff --git a/pkg/network/discovery_test.go b/pkg/network/discovery_test.go
index f4a7a56a8..fdcea6af1 100644
--- a/pkg/network/discovery_test.go
+++ b/pkg/network/discovery_test.go
@@ -74,6 +74,7 @@ func TestDefaultDiscoverer(t *testing.T) {
 		assert.Equal(t, 0, len(d.BadPeers()))
 		require.Equal(t, set1, set1D)
 	}
+	require.Equal(t, 2, d.GetFanOut())
 
 	// Request should make goroutines dial our addresses draining the pool.
 	d.RequestRemote(len(set1))
@@ -131,14 +132,13 @@ func TestDefaultDiscoverer(t *testing.T) {
 	for _, addr := range set1 {
 		d.UnregisterConnectedAddr(addr)
 	}
-	assert.Equal(t, 0, len(d.UnconnectedPeers()))
+	assert.Equal(t, 2, len(d.UnconnectedPeers())) // They're re-added automatically.
 	assert.Equal(t, 0, len(d.BadPeers()))
 	assert.Equal(t, len(set1), len(d.GoodPeers()))
-	require.Equal(t, 0, d.PoolCount())
+	require.Equal(t, 2, d.PoolCount())
 
 	// Now make Dial() fail and wait to see addresses in the bad list.
 	atomic.StoreInt32(&ts.retFalse, 1)
-	d.BackFill(set1...)
 	assert.Equal(t, len(set1), d.PoolCount())
 	set1D := d.UnconnectedPeers()
 	sort.Strings(set1D)
@@ -157,7 +157,7 @@ func TestDefaultDiscoverer(t *testing.T) {
 			}
 		}
 	}
-	require.Equal(t, 0, d.PoolCount())
+	require.Eventually(t, func() bool { return d.PoolCount() == 0 }, 2*time.Second, 50*time.Millisecond)
 	sort.Strings(dialledBad)
 	for i := 0; i < len(set1); i++ {
 		for j := 0; j < connRetries; j++ {
@@ -174,10 +174,6 @@ func TestDefaultDiscoverer(t *testing.T) {
 	assert.Equal(t, len(set1), len(d.BadPeers()))
 	assert.Equal(t, 0, len(d.GoodPeers()))
 	require.Equal(t, 0, d.PoolCount())
-
-	// Close should work and subsequent RequestRemote is a no-op.
-	d.Close()
-	d.RequestRemote(42)
 }
 
 func TestSeedDiscovery(t *testing.T) {
diff --git a/pkg/network/helper_test.go b/pkg/network/helper_test.go
index 0022a9eac..d06b12847 100644
--- a/pkg/network/helper_test.go
+++ b/pkg/network/helper_test.go
@@ -33,13 +33,22 @@ func (d *testDiscovery) BackFill(addrs ...string) {
 	defer d.Unlock()
 	d.backfill = append(d.backfill, addrs...)
 }
-func (d *testDiscovery) Close()         {}
 func (d *testDiscovery) PoolCount() int { return 0 }
 func (d *testDiscovery) RegisterBadAddr(addr string) {
 	d.Lock()
 	defer d.Unlock()
 	d.bad = append(d.bad, addr)
 }
+func (d *testDiscovery) GetFanOut() int {
+	d.Lock()
+	defer d.Unlock()
+	return (len(d.connected) + len(d.backfill)) * 2 / 3
+}
+func (d *testDiscovery) NetworkSize() int {
+	d.Lock()
+	defer d.Unlock()
+	return len(d.connected) + len(d.backfill)
+}
 func (d *testDiscovery) RegisterGoodAddr(string, capability.Capabilities) {}
 func (d *testDiscovery) RegisterConnectedAddr(addr string) {
 	d.Lock()
@@ -188,6 +197,5 @@ func newTestServerWithCustomCfg(t *testing.T, serverConfig ServerConfig, protoco
 	s, err := newServerFromConstructors(serverConfig, fakechain.NewFakeChainWithCustomCfg(protocolCfg), new(fakechain.FakeStateSync), zaptest.NewLogger(t),
 		newFakeTransp, newTestDiscovery)
 	require.NoError(t, err)
-	t.Cleanup(s.discovery.Close)
 	return s
 }
diff --git a/pkg/network/prometheus.go b/pkg/network/prometheus.go
index dab35c44c..31088e3f7 100644
--- a/pkg/network/prometheus.go
+++ b/pkg/network/prometheus.go
@@ -6,6 +6,14 @@ import (
 
 // Metric used in monitoring service.
 var (
+	estimatedNetworkSize = prometheus.NewGauge(
+		prometheus.GaugeOpts{
+			Help:      "Estimated network size",
+			Name:      "network_size",
+			Namespace: "neogo",
+		},
+	)
+
 	peersConnected = prometheus.NewGauge(
 		prometheus.GaugeOpts{
 			Help:      "Number of connected peers",
@@ -42,6 +50,7 @@ var (
 
 func init() {
 	prometheus.MustRegister(
+		estimatedNetworkSize,
 		peersConnected,
 		servAndNodeVersion,
 		poolCount,
@@ -49,6 +58,10 @@ func init() {
 	)
 }
 
+func updateNetworkSizeMetric(sz int) {
+	estimatedNetworkSize.Set(float64(sz))
+}
+
 func updateBlockQueueLenMetric(bqLen int) {
 	blockQueueLength.Set(float64(bqLen))
 }
diff --git a/pkg/network/server.go b/pkg/network/server.go
index 8ef0f6eea..18f61fa33 100644
--- a/pkg/network/server.go
+++ b/pkg/network/server.go
@@ -35,6 +35,7 @@ const (
 	defaultAttemptConnPeers   = 20
 	defaultMaxPeers           = 100
 	defaultExtensiblePoolSize = 20
+	defaultBroadcastFactor    = 0
 	maxBlockBatch             = 200
 	minPoolCount              = 30
 )
@@ -222,6 +223,13 @@ func newServerFromConstructors(config ServerConfig, chain Ledger, stSync StateSy
 		s.AttemptConnPeers = defaultAttemptConnPeers
 	}
 
+	if s.BroadcastFactor < 0 || s.BroadcastFactor > 100 {
+		s.log.Info("bad BroadcastFactor configured, using the default value",
+			zap.Int("configured", s.BroadcastFactor),
+			zap.Int("actual", defaultBroadcastFactor))
+		s.BroadcastFactor = defaultBroadcastFactor
+	}
+
 	s.transport = newTransport(s)
 	s.discovery = newDiscovery(
 		s.Seeds,
@@ -261,7 +269,6 @@ func (s *Server) Start(errChan chan error) {
 func (s *Server) Shutdown() {
 	s.log.Info("shutting down server", zap.Int("peers", s.PeerCount()))
 	s.transport.Close()
-	s.discovery.Close()
 	for _, p := range s.getPeers(nil) {
 		p.Disconnect(errServerShutdown)
 	}
@@ -380,10 +387,28 @@ func (s *Server) ConnectedPeers() []string {
 // while itself dealing with peers management (handling connects/disconnects).
 func (s *Server) run() {
 	go s.runProto()
-	for {
-		if s.PeerCount() < s.MinPeers {
+	for loopCnt := 0; ; loopCnt++ {
+		var (
+			netSize = s.discovery.NetworkSize()
+			// "Optimal" number of peers.
+			optimalN = s.discovery.GetFanOut() * 2
+			// Real number of peers.
+			peerN = s.PeerCount()
+		)
+
+		if peerN < s.MinPeers {
+			// Starting up or going below the minimum -> quickly get many new peers.
 			s.discovery.RequestRemote(s.AttemptConnPeers)
+		} else if s.MinPeers > 0 && loopCnt%s.MinPeers == 0 && optimalN > peerN && optimalN < s.MaxPeers && optimalN < netSize {
+			// Having some number of peers, but probably can get some more, the network is big.
+			// It also allows to start picking up new peers proactively, before we suddenly have <s.MinPeers of them.
+			var connN = s.AttemptConnPeers
+			if connN > optimalN-peerN {
+				connN = optimalN - peerN
+			}
+			s.discovery.RequestRemote(connN)
 		}
+
 		if s.discovery.PoolCount() < minPoolCount {
 			s.broadcastHPMessage(NewMessage(CMDGetAddr, payload.NewNullPayload()))
 		}
@@ -439,11 +464,9 @@ func (s *Server) run() {
 					s.lock.RUnlock()
 					if !stillConnected {
 						s.discovery.UnregisterConnectedAddr(addr)
-						s.discovery.BackFill(addr)
 					}
 				} else {
 					s.discovery.UnregisterConnectedAddr(addr)
-					s.discovery.BackFill(addr)
 				}
 				updatePeersConnectedMetric(s.PeerCount())
 			} else {
@@ -644,7 +667,6 @@ func (s *Server) handleVersionCmd(p Peer, version *payload.Version) error {
 		return errInvalidNetwork
 	}
 	peerAddr := p.PeerAddr().String()
-	s.discovery.RegisterConnectedAddr(peerAddr)
 	s.lock.RLock()
 	for peer := range s.peers {
 		if p == peer {
@@ -658,6 +680,7 @@ func (s *Server) handleVersionCmd(p Peer, version *payload.Version) error {
 		}
 	}
 	s.lock.RUnlock()
+	s.discovery.RegisterConnectedAddr(peerAddr)
 	return p.SendVersionAck(NewMessage(CMDVerack, payload.NewNullPayload()))
 }
 
@@ -1354,8 +1377,13 @@ func (s *Server) iteratePeersWithSendMsg(msg *Message, send func(Peer, context.C
 		return
 	}
 
-	var replies = make(chan error, peerN) // Cache is there just to make goroutines exit faster.
-	var ctx, cancel = context.WithTimeout(context.Background(), s.TimePerBlock/2)
+	var (
+		// Optimal number of recipients.
+		enoughN     = s.discovery.GetFanOut()
+		replies     = make(chan error, peerN) // Cache is there just to make goroutines exit faster.
+		ctx, cancel = context.WithTimeout(context.Background(), s.TimePerBlock/2)
+	)
+	enoughN = (enoughN*(100-s.BroadcastFactor) + peerN*s.BroadcastFactor) / 100
 	for _, peer := range peers {
 		go func(p Peer, ctx context.Context, pkt []byte) {
 			// Do this before packet is sent, reader thread can get the reply before this routine wakes up.
@@ -1377,8 +1405,7 @@ func (s *Server) iteratePeersWithSendMsg(msg *Message, send func(Peer, context.C
 		if sentN+deadN == peerN {
 			break
 		}
-		// Send to 2/3 of good peers.
-		if 3*sentN >= 2*(peerN-deadN) && ctx.Err() == nil {
+		if sentN >= enoughN && ctx.Err() == nil {
 			cancel()
 		}
 	}
diff --git a/pkg/network/server_config.go b/pkg/network/server_config.go
index e46f52900..c3eb3baa4 100644
--- a/pkg/network/server_config.go
+++ b/pkg/network/server_config.go
@@ -78,6 +78,9 @@ type (
 
 		// ExtensiblePoolSize is the size of the pool for extensible payloads from a single sender.
 		ExtensiblePoolSize int
+
+		// BroadcastFactor is the factor (0-100) for fan-out optimization.
+		BroadcastFactor int
 	}
 )
 
@@ -107,5 +110,6 @@ func NewServerConfig(cfg config.Config) ServerConfig {
 		P2PNotaryCfg:       appConfig.P2PNotary,
 		StateRootCfg:       appConfig.StateRoot,
 		ExtensiblePoolSize: appConfig.ExtensiblePoolSize,
+		BroadcastFactor:    appConfig.BroadcastFactor,
 	}
 }