There are 2 problems:
1. `getvalidators` RPC can return empty list.
2. `+1` in single node can be too resrictive.
Proper solution for (1) may require requesting
standby validators. Here we add constant
to fix occasional test failures.
If port is dynamically allocated, `(*Server).Addr` will contain
0 port. This commit executes listener before exiting from `Start()`
and sets Addr to the actual address.
It's used in two places now:
* Blockchain.AddBlock()
This one does transaction duplication check of its own, doing it in
Verify() is just a waste of time. Merkle tree root hash value check is
still relevant though
* Block.DecodeBinary()
We're decoding blocks for the following purposes:
- on restore from dump
The block will be added to the chain via AddBlock() and that will do a
full check of it (if configured to do so)
- on retrieving the block from the DB (DAO)
We trust the DB, if it's gone wild, this check won't really help
- on receiving the block via P2P
It's gonna be put into block queue and then end up in AddBlock() which
will check it
- on receiving the block via RPC (submitblock)
It is to be passed into AddBlock()
- on receiving the block via RPC in a client
That's the only problematic case probably, but RPC client has to trust
the server and it can check for the signature if it really
cares. Or a separate in-client check might be added.
As we can see nothing really requires this verification to be done the way it
is now, AddBlock can just have a Merkle check and DecodeBinary can do fine
without it at all.
We're at the point where even this code can clearly be seen in profiles. We
can save on some buffers (and CPU cycles) by encoding the answer once.
Another ~2% TPS for single node.
Time is not really relevant for us here and we don't use this timestamp in any
way. Yet it occupies 24 bytes and we do two clock_gettime calls to get it.
Replace it with blockStamp which is going to be used in the future for
transaction retransmissions.
It allows to improve single-node TPS by another 3%.
To calculate network fee properly we must know type of every
signer (simple, multisig, contract). Providing scripts is the most
simple and flexible way to know this.
C# node is quite picky as it expects there to be exactly one value returned,
but our testchain actually adds 4 signatures for multisig cases instead of 3
which makes it technically incompatible with C# node.
As it's returned sorted now. Fixes state change mismatch for
NextValidators. It also partially reverts
2f8e7e4d33 and significantly changes the test
chain as the fees are no longer being sent to the same account.
It's not needed any more with Go 1.13 as we have wrapping/unwrapping in base
packages. All errors.Wrap calls are replaced with fmt.Errorf, some strings are
improved along the way.
Allow to invoke methods by offset:
1. Every invoked contract must have manifest.
2. Check arguments count on invocation.
3. Change AppCall to a regular syscall.
4. Add test suite for `System.Contract.Call`.
GetScriptContainer() interop can try to get this transaction and this attempt
will lead to hash calculation with transaction serialization, but transaction
can't be successfully serialized if it doesn't have a script set, so this
makes test invocations fail.
We were accepting transactions with zero system fee, but we shouldn't do
that. Also, transaction's verification execution has to be limited by network
fee.
The script is passed as a hex string, but no one should care. The hash is a
hex-encoded LE value, but no one should care either. Hex might change to
base64, LE to BE, no one outside these functions should care about that.
Implement (*Param).GetBoolean() for converting parameter to bool value.
It is used for verbosity flag and is false iff it is either zero number
or empty sting.
This error message makes no sense when shutting down the server:
2020-06-25T19:29:53.251+0300 ERROR failed to start RPC server {"error": "http: Server closed"}
And ListenAndServer is documented to always return non-nil error one of which
is http.ErrServerClosed. This should also fix the following test failure:
==================
WARNING: DATA RACE
Read at 0x00c000254243 by goroutine 49:
testing.(*common).logDepth()
/usr/local/go/src/testing/testing.go:665 +0xa1
testing.(*common).Logf()
/usr/local/go/src/testing/testing.go:658 +0x8f
testing.(*T).Logf()
<autogenerated>:1 +0x75
go.uber.org/zap/zaptest.testingWriter.Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zaptest/logger.go:130 +0x11f
go.uber.org/zap/zaptest.(*testingWriter).Write()
<autogenerated>:1 +0xa9
go.uber.org/zap/zapcore.(*ioCore).Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zapcore/core.go:90 +0x1c3
go.uber.org/zap/zapcore.(*CheckedEntry).Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zapcore/entry.go:215 +0x1e7
go.uber.org/zap.(*Logger).Error()
/go/pkg/mod/go.uber.org/zap@v1.10.0/logger.go:203 +0x95
github.com/nspcc-dev/neo-go/pkg/rpc/server.(*Server).Start()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server.go:179 +0x5c5
Previous write at 0x00c000254243 by goroutine 44:
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:900 +0x353
testing.tRunner()
/usr/local/go/src/testing/testing.go:913 +0x1bb
Goroutine 49 (running) created at:
github.com/nspcc-dev/neo-go/pkg/rpc/server.initClearServerWithInMemoryChain()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_helper_test.go:69 +0x305
github.com/nspcc-dev/neo-go/pkg/rpc/server.initServerWithInMemoryChain()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_helper_test.go:78 +0x3c
github.com/nspcc-dev/neo-go/pkg/rpc/server.testRPCProtocol()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:805 +0x53
github.com/nspcc-dev/neo-go/pkg/rpc/server.TestRPC.func1()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:793 +0x44
testing.tRunner()
/usr/local/go/src/testing/testing.go:909 +0x199
Goroutine 44 (finished) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:960 +0x651
github.com/nspcc-dev/neo-go/pkg/rpc/server.TestRPC()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:792 +0x5d
testing.tRunner()
/usr/local/go/src/testing/testing.go:909 +0x199
==================
ValidatorsCount is not initialized at block 0 with C# node (the first voter
initializes it) and until that initialization happens the standby validators
list is being returned as is without sorting.
Fixes state mismatch for the key ffffffff0e00000000000000000000000000000001 in
the first blocks.
It also affects tests as now the first validator is different and it receives
the network fees.
There is no such thing as high/low priority transactions, as there are
no free transactions anymore and they are ordered by fees contained
in transaction itself.
Closes#1063.
It's just JSON, io.Serializable is only used for DB storage where the length
should be obtained from the stream. Fixes:
2020-06-18T22:14:10.571+0300 WARN contract invocation failed {"tx": "1ffd475a9c246495d6206cb80a9a78e9d14a433ded60cd37aa87d897655606e1", "block": 25893, "error": "error encountered at instruction 3696 (SYSCALL): failed to invoke syscall: invalid character ':' after top-level value"}
We make it explicit in the appropriate Block/Transaction structures, not via a
singleton as C# node does. I think this approach has a bit more potential and
allows better packages reuse for different purposes.
It doesn't affect anything yet, but it's going to be used in the future for
network-specific behavior. It also renames short '--timeout' form to '-s'
avoiding conlict with '-t' used for '--testnet'.
