Commit graph

197 commits

Author SHA1 Message Date
Roman Khimov
c4e084b0d8 *: fix whitespace errors
leading/trailing newlines
2021-05-12 22:51:41 +03:00
Roman Khimov
99108c620f network: fix errcheck warning 2021-05-12 20:14:35 +03:00
Roman Khimov
cfc067dd24 *: remove dead code
Found by deadcode via golangci-lint.
2021-05-12 18:13:14 +03:00
Evgeniy Stratonikov
275a5c9daa network: limit message number from the same sender 2021-05-12 10:52:11 +03:00
Anna Shaleva
09bb162de0 network: add ability to specify port for P2P version exchange 2021-04-30 11:27:55 +03:00
Roman Khimov
99b71bbbd1 network: move service starts to tryStartServices
All of them only make sense on a fully synchronized node, doing anything
during the initial sync is just a waste of time.
2021-04-02 13:12:06 +03:00
Roman Khimov
690a1db589 network: replace consensusStarted/canHandleExtens with syncReached flag
They're essentially the same.
2021-04-02 12:55:56 +03:00
Roman Khimov
a01636a1b0 stateroot: set networking callback in a more straightforward way 2021-04-02 12:12:36 +03:00
Roman Khimov
546faf5e70
Merge pull request #1859 from nspcc-dev/rework-signing-fix-stateroots
Rework signing, fix stateroots
2021-03-26 14:04:23 +03:00
Roman Khimov
d314f82db3 transaction: drop Network from Transaction
We only need it when signing/verifying.
2021-03-26 13:45:18 +03:00
Roman Khimov
fa4380c9da network: prevent putting duplicate addresses into pool from peer's data
It can't be trusted.
2021-03-26 12:31:07 +03:00
Anna Shaleva
23a3514cc0 consensus: store ProtocolConfiguration in consensus config 2021-03-15 16:58:27 +03:00
Evgeniy Stratonikov
2f3abf95a2 stateroot: broadcast state on new blocks 2021-03-09 13:51:11 +03:00
Evgeniy Stratonikov
3c65ed1507 stateroot: allow to sign new roots 2021-03-09 13:51:11 +03:00
Evgeniy Stratonikov
ac227a80fe stateroot: use RoleStateValidator for verification 2021-03-09 13:51:10 +03:00
Anna Shaleva
94430ef3ca network: refactor RelayTx error handling
We don't need to wrap different core errors in server. Also it would be
good to provede more error info to the user.
2021-02-18 12:40:40 +03:00
Anna Shaleva
9f6fba5926 network: specify error message
For better user experience.
2021-02-16 14:11:42 +03:00
Anna Shaleva
bcb82b457d config: move notary module config to ApplicationConfiguration 2021-02-16 13:58:25 +03:00
Anna Shaleva
8444f3d816 network: refactor notary service's PostBlock
There was a deadlock while trying to finalize transaction during
PostBlock:
	1) (*Notary).PostBlock is called under the blockchain lock
	2) (*Notary).onTransaction is called inside the PostBlock
	3) (*Notary).onTransaction needs to RLock the blockchain to add
completed transaction to the memory pool (and the blockchain is Lock'ed
by this moment)

The problem is fixed by using notifications subsistem, because it's not
required to call (*Notary).PostBlock under the blockchain lock.
2021-02-11 17:11:36 +03:00
Anna Shaleva
5d6fdda664 network: fix P2PNotaryRequest payload broadcaster 2021-02-11 17:11:36 +03:00
Anna Shaleva
c14e34cdb5 network: add RelayP2PNotaryRequest method 2021-02-11 16:56:24 +03:00
Roman Khimov
a87b8578b2 network: stub "StateService" payloads out for now
And stop dropping connections if we're to receive them. Proper handling is
subject of #1701, but we need at least some connection-level stability for
now.
2021-02-05 14:59:41 +03:00
Roman Khimov
686f983ccf network: prevent disconnects during initial sync
Node receiving extensible payload from the future is confused and drops
connection. Note that this can still happen if the node is to loose its
synchrony.

Calling `IsInSync()` is quite expensive, so we stop doing that once synchrony
is reached (hence bool flag).
2021-02-05 14:54:43 +03:00
Anna Shaleva
bfbd096fed core: introduce mempool notifications 2021-02-02 22:01:32 +03:00
Anna Shaleva
19fa0daaa6 core, network: add Notary module 2021-02-02 22:01:20 +03:00
Evgeniy Stratonikov
9592f3e052 network: implement pool for Extensible payloads 2021-01-28 17:09:06 +03:00
Evgenii Stratonikov
43e4d3af88 oracle: integrate module in core and RPC
1. Initialization is performed via `Blockchain` methods.
2. Native Oracle contract updates list of oracle nodes
  and in-fly requests in `PostPersist`.
3. RPC uses Oracle module directly.
2021-01-28 13:00:58 +03:00
Evgeniy Stratonikov
5d83c28bc9 network: replace ConsensusType with ExtensibleType 2021-01-22 10:38:33 +03:00
Evgenii Stratonikov
5bd6c1e5cc network: fix a bug in discovery with a peer connected twice
It could be the case that checks are performed simultaneosly and
peers connections goes down from 2 to 0. We must take such case into
account and register address as good in discovery.
2020-12-25 14:36:53 +03:00
Evgenii Stratonikov
2cb536a6a1 network: provide NullPayload where necessary 2020-12-25 14:36:53 +03:00
Evgenii Stratonikov
0a5049658f network: support non-blocking broadcast
Right now a single slow peer can slow down whole network.
Do broadcast in 2 parts:
1. Perform non-blocking send to all peers if possible.
2. Perform blocking sends until message is sent to 2/3 of good peers.
2020-12-25 14:36:52 +03:00
Anna Shaleva
0b5cf78468 network: add notary request payload 2020-12-10 18:17:31 +03:00
Evgenii Stratonikov
27624946d9 network/test: add tests for server commands 2020-12-09 15:23:49 +03:00
Evgenii Stratonikov
bd81b19a7a network: fix requestTx()
2 bugs were here:
1. If amount of tx is small, no messages were sent.
2. Correctly cut byte slice if last message is small.
2020-12-09 12:04:10 +03:00
Evgenii Stratonikov
074ba5f394 network: fix GetBlocks command
Return exactly requested amount of hashes.
2020-12-09 12:04:10 +03:00
Evgenii Stratonikov
4aa1a37f3f network: fetch blocks in parallel
Blockcache size is 2000, while max request size is 500.
Try to fetch blocks in chunks starting from current height.
Lower height has priority.
2020-12-02 10:50:35 +03:00
Roman Khimov
2ce3c8b75f network: treat unsolicited addr commands as errors
See neo-project/neo#2097.
2020-11-25 13:34:38 +03:00
Evgenii Stratonikov
1869d6d460 core: allow to use state root in header 2020-11-20 17:16:32 +03:00
Evgenii Stratonikov
3e5b84348d network: retransmit stale transactions 2020-11-12 13:51:44 +03:00
Roman Khimov
38a22b44b2 network: try connecting to seeds indefinitely, use them with 0 pool
If the node is to start with seeds unavailable it will try connecting to each
of them three times, blacklist them and then sit forever waiting for
something. It's not a good behavior, it should always try connecting to seeds
if nothing else works.
2020-10-13 19:02:10 +03:00
Roman Khimov
5abec520c7 payload: limit the number of possible addresses 2020-10-07 23:29:20 +03:00
Evgenii Stratonikov
282b55494b consensus: allow to shutdown service 2020-09-18 12:07:01 +03:00
Roman Khimov
b78bc7f097 network: fix tx requests, we can't ask more than 500 txes at once 2020-09-09 20:46:31 +03:00
Roman Khimov
097b2b8e78 network: fail fast in iteratePeersWithSendMsg
This easily saves us some allocations for single node.
2020-09-09 20:46:31 +03:00
Roman Khimov
8d19f0e6f5 network: don't request block we already have
GetBlockByIndex handler starts sending blocks right from the start index and
if that index is s.chain.BlockHeight() then we're requesting and receiving a
block we already have.
2020-08-14 16:25:13 +03:00
Roman Khimov
c8cc91eeee network: request blocks when there is a ping with bigger than ours height
Turns out, C# node no longer broadcasts an Inv when it's creating a block,
instead it sends a ping and if we're not paying attention to the height
specified there we're technically missing a new block. Of course we'll get it
later after ping timer expiration and regular ping/pong sequence, but that's
delaying it for no good reason.
2020-08-14 16:22:15 +03:00
Roman Khimov
205f52c563 core: use error wrapping to provide more details 2020-08-07 12:21:52 +03:00
Anna Shaleva
6c8accf18c core, network: request blocks instead of headers
Closes #1192

1. We now have CMDGetBlockByIndex, so there's no need to request headers
   first when we can just ask for blocks.
2. We don't ask for headers (i.e. we don't send CMDGetHeaders),
   consequently, we shouldn't react on CMDHeaders.
3. But we still keep on reacting on CMDGetHeaders command as
   there could be a node which needs headers.
2020-08-04 17:52:34 +03:00
Anna Shaleva
f6f3863e0e network: allow to GetHeaders by index
Use GetBlockByIndex payload for GetHeaders command instead of GetBlocks
payload.
2020-08-04 17:52:34 +03:00
Anna Shaleva
7b1c305000 network: fix handleGetBlockByIndexCmd method
It returned an error in case if block wasn't found (it might be when our
chain is lower). Fixed. It also should return all requested blocks, not
the first one.
2020-08-04 17:52:34 +03:00