Now we have VerifyTx() and PoolTx() APIs that either verify transaction in
isolation or verify it against the mempool (either the primary one or the one
given) and then add it there. There is no possibility to check against the
mempool, but not add a transaction to it, but I doubt we really need it.
It allows to remove some duplication between old PoolTx and verifyTx where
they both tried to check transaction against mempool (verifying first and then
adding it). It also saves us utility token balance check because it's done by
the mempool anyway and we no longer need to do that explicitly in verifyTx.
It makes AddBlock() and verifyBlock() transaction's checks more correct,
because previously they could miss that even though sender S has enough
balance to pay for A, B or C, he can't pay for all of them.
Caveats:
* consensus is running concurrently to other processes, so things could
change while verifyBlock() is iterating over transactions, this will be
mitigated in subsequent commits
Improves TPS value for single node by at least 11%.
Fixes#667, fixes#668.
It's cached in dbft for a view anyway, so there is no big difference here
from security POV. Lets us squeeze yet another 4% TPS improvement.
Make the system fail if unable to decrypt the key along the way, which is a
part of #1312.
As it's returned sorted now. Fixes state change mismatch for
NextValidators. It also partially reverts
2f8e7e4d33 and significantly changes the test
chain as the fees are no longer being sent to the same account.
It's not needed any more with Go 1.13 as we have wrapping/unwrapping in base
packages. All errors.Wrap calls are replaced with fmt.Errorf, some strings are
improved along the way.
We were accepting transactions with zero system fee, but we shouldn't do
that. Also, transaction's verification execution has to be limited by network
fee.
GetValidators without parameter is called upon DBFT initialization and it
should receive validators for the next block (that will create it),
parameterized GetValidators is used for NextConsensus calculation where we
need a list for the current state of the chain.
In order to avoid dependency cycle at the next commits:
imports github.com/nspcc-dev/neo-go/pkg/config
imports github.com/nspcc-dev/neo-go/pkg/wallet
imports github.com/nspcc-dev/neo-go/pkg/vm
imports github.com/nspcc-dev/neo-go/pkg/smartcontract/nef
imports github.com/nspcc-dev/neo-go/pkg/config
When CN is not up to date with the network is synchonizes blocks first and
only then starts consensus process. But while synchronizing it receives
consensus payloads and tries to process them even though messages reader
routine is not started yet. This leads to lots of goroutines waiting to send
their messages:
Jun 25 23:55:53 nodoka neo-go[32733]: goroutine 1639919 [chan send, 4 minutes]:
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/consensus.(*service).OnPayload(0xc0000ecb40, 0xc005bd7680)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/consensus/consensus.go:329 +0x31b
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleConsensusCmd(...)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:687
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleMessage(0xc0000ba160, 0x1053260, 0xc00507d170, 0xc005bdd560, 0x0, 0x0)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:806 +0xd58
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*TCPPeer).handleConn(0xc00507d170)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_peer.go:160 +0x294
Jun 25 23:55:53 nodoka neo-go[32733]: created by github.com/nspcc-dev/neo-go/pkg/network.(*TCPTransport).Dial
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_transport.go:38 +0x1ad
Jun 25 23:55:53 nodoka neo-go[32733]: goroutine 1639181 [chan send, 10 minutes]:
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/consensus.(*service).OnPayload(0xc0000ecb40, 0xc013bb6600)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/consensus/consensus.go:329 +0x31b
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleConsensusCmd(...)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:687
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleMessage(0xc0000ba160, 0x1053260, 0xc01361ee10, 0xc01342c780, 0x0, 0x0)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:806 +0xd58
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*TCPPeer).handleConn(0xc01361ee10)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_peer.go:160 +0x294
Jun 25 23:55:53 nodoka neo-go[32733]: created by github.com/nspcc-dev/neo-go/pkg/network.(*TCPTransport).Dial
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_transport.go:38 +0x1ad
Jun 25 23:55:53 nodoka neo-go[32733]: goroutine 39454 [chan send, 32 minutes]:
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/consensus.(*service).OnPayload(0xc0000ecb40, 0xc014fea680)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/consensus/consensus.go:329 +0x31b
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleConsensusCmd(...)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:687
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*Server).handleMessage(0xc0000ba160, 0x1053260, 0xc0140b2ea0, 0xc014fe0ed0, 0x0, 0x0)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/server.go:806 +0xd58
Jun 25 23:55:53 nodoka neo-go[32733]: github.com/nspcc-dev/neo-go/pkg/network.(*TCPPeer).handleConn(0xc0140b2ea0)
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_peer.go:160 +0x294
Jun 25 23:55:53 nodoka neo-go[32733]: created by github.com/nspcc-dev/neo-go/pkg/network.(*TCPTransport).Dial
Jun 25 23:55:53 nodoka neo-go[32733]: #011/go/src/github.com/nspcc-dev/neo-go/pkg/network/tcp_transport.go:38 +0x1ad
Luckily it doesn't break synchronization completely as eventually connection
timers fire, the node breaks all connections, create new ones and these new
ones request blocks successfully until another consensus payload stalls them
too. In the end the node reaches synchronization, message processing loop
starts and releases all of these waiting goroutines, but it's better for us to
avoid this happening at all.
This also makes double-starting a no-op which is a nice property.
Using view number from the recovery message is just plain wrong, it's gonna be
higher than our current view and these messages will be treated as coming from
the future, even though they have their original view number included.
ValidatorsCount is not initialized at block 0 with C# node (the first voter
initializes it) and until that initialization happens the standby validators
list is being returned as is without sorting.
Fixes state mismatch for the key ffffffff0e00000000000000000000000000000001 in
the first blocks.
It also affects tests as now the first validator is different and it receives
the network fees.
part of #904
1. We now have MaxTransactionsPerBlock set in native Policy contract,
so this value should be used in (dbft).GetVerified method instead
of passing it as an argument.
2. Removed (dbft).WithTxPerBlock.
2. DBFT API has changed, so update it's version.
3. Removed MaxTransactionsPerBlock from node configuration, as we
have it set in native Policy contract.
There is no such thing as high/low priority transactions, as there are
no free transactions anymore and they are ordered by fees contained
in transaction itself.
Closes#1063.
We make it explicit in the appropriate Block/Transaction structures, not via a
singleton as C# node does. I think this approach has a bit more potential and
allows better packages reuse for different purposes.
Two changes being done here, because they require a lot of updates to
tests. Now we're back into version 0 and we only have one type of
transaction.
It also removes GetType and GetScript interops, both are obsolete in Neo 3.
