Because synchronization _most likely_ will have apply already existing
operations, it is much faster to check their presence in a read
transaction. However, always doing this will degrade the perfomance
for normal `Apply`. And, let's be honest, it is already not good.
Thus we add a separate parameter which specifies whether this logic is
enabled.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
`GETRANGEHASH` request spawns `GETRANGE` requests if an object could not be
found locally. If the original request contains session, it can be static
and, therefore, fetching session key can not be performed successfully.
As the best effort a node could request object's range with its own key.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Both `meta` and `write-cache` are expected to have a fast underlying disk,
so it does not seem like an optimisation. Moreover, `write-cache`'s `Head`
is a `Get` with payload cutting, it _must_ use more memory for no reason
(`meta` was created for such requests). Also, `write-cache` does not allow
performing any "meta" relations checks (such as locking, tombstoning).
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Node children are not sorted and could occur in any order.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
We use cache to avoid policing the same object multiple times in a short
time span (< 30 seconds). If we have 200_000 objects in a blobstor, it is a bit useless
-- if it takes 1 second to process an object and we have `replicator.pool_size: 20`
in config, the next iteration will happen in 10_000 second which is much
larger than 30 second. However we still consume a lot of memory, so it
makes sense to use saner default.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Stop child objects collection if the last returned object (the most "left"
object in the collected chain) starts exactly from the `GETRANGE`'s `from`
value.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
That could happen if a node forwards request to a node that closed the
connection during the original object stream.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Could be related to "websocket users limit reached" on the `neo-go` server
side when an SN/IR is rebooting repeatedly.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
1. Replace `mn` function with a `sigCount`.
2. Use `notary.FakeMultisigAccount` for account creation.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Includes:
1. mode change read lock operation in every exported method that r/w the
underlying database;
2. returning `ErrDegradedMode` logical error if any exported method is
called in degraded (without a metabase) mode.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
```
2022/11/15 08:40:56 worker exits from a panic: runtime error: index out of range [0] with length 0
2022/11/15 08:40:56 worker exits from panic: goroutine 1188 [running]:
github.com/panjf2000/ants/v2.(*goWorker).run.func1.1()
github.com/panjf2000/ants/v2@v2.4.0/worker.go:58 +0x10c
panic({0x1042b60, 0xc0015ae018})
runtime/panic.go:1038 +0x215
github.com/nspcc-dev/neofs-node/pkg/services/policer.(*Policer).shardPolicyWorker.func1()
github.com/nspcc-dev/neofs-node/pkg/services/policer/process.go:65 +0x366
github.com/panjf2000/ants/v2.(*goWorker).run.func1()
github.com/panjf2000/ants/v2@v2.4.0/worker.go:68 +0x97
created by github.com/panjf2000/ants/v2.(*goWorker).run
github.com/panjf2000/ants/v2@v2.4.0/worker.go:48 +0x68
```
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Includes extending listing methods in the Storage Engine with object types.
It allows tuning replication/policer algorithms: container nodes do
not remove `LOCK` objects as redundant and try to fulfill `LOCK` placement
on the ohter container nodes.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It allows keeping all the locked objects safe after metabase
resynchronization. Currently, all `LOCK` objects are broadcast to all nodes
in a container, it guarantees `LOCK` object presence in a regular situation.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
1. Remove a layer of indirection for mutex, `ClientCache` is already
used by pointer.
2. Fix duplication of a `AllowExternal` field.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
A container node is expected to have full "get" access to assemble the
object.
A non-container node is expected to forward any request to a container node.
Any token is expected to be issued for an original request sender not for a
node so any new request is invalid by design with that token.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not lose meta information of the original requests: cache session and
bearer tokens of the original request b/w a new generated ones. Middle
request wrappers should not contain any meta information, since it is
useless (e.g. ACL service checks only the original tokens).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After presenting request statuses on the API level, all the errors are
unwrapped before sending to the caller side. It led to a losing invalid
request's context.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It was needed before we started to flush during transition to
`degraded` mode. Now it is confusing.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Do not use node's local storage if it is clear that an object will be
removed anyway as a redundant. It requires moving the changing local storage
logic from the validation step to the local target implementation.
It allows performing any relations checks (e.g. object locking) only if a
node is considered as a valid container member and is expected to store
(stored previously) all the helper objects (e.g. `LOCK`, `TOMBSTONE`, etc).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It is not an error: removing virtual object is expected and should be just
skipped. Getting a virtual object with `raw` flag is considered as an
impossible action, all the virtual objects removals will be handled via
their children's removals implicitly.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Currently there is a possibility for modifying operations to fail
because of I/O errors and a new tree to be created on another shard.
This commit adds existence check for modifying operations.
Read operations remain as they are, not to slow things.
`TreeDrop` is an exception, because this is a tree removal and trying
multiple shards is not an unwanted behaviour.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
By default writecache puts the whole object to update storage ID.
This logic comes from the times when we needed to put objects
in the metabase by the writecache itself. Now this is done by the
blobstor at unmarshaling objects during flush only to update storage ID
is an overkill.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
All logic errors are wrapped in `logicerr.Logical` type and do not
affect shard error counter.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
In previous implementation `Shard.Delete` logged writecache's removal
failures in `error` level. There is a need to decrease severity of these
log records since they aren't critical and don't require individual
review.
Change level of the message to `info`.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
From the `Bucket.ForEach` doc:
```
The provided function must not modify the bucket; this will result in undefined behavior.
```
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
After the refactor there are new storage characteristics: a type and
a general storage id (that could be stringified).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In previous implementation turning to maintenance mode using NeoFS CLI
required NeoFS API endpoint. This was not convenient from the user
perspective. It's worth to move networks settings' check to the server
side.
Add `force_maintenance` field to `SetNetmapStatusRequest.Body` message
of Control API. Add `force` flag to `neofs-cli control set-status`
command which sets corresponding field in the requests body if status is
`maintenance`. Force flag is ignored for any other status.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Iterate over every shard and search for the container's trees. Final result
is a concatenation of shards' results. It is considered that one fixed tree
is placed on one fixed shard but the different trees of a fixed container
could be placed on different shards.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `SynchronizeAllTrees` method of the Tree service. It allows fetching
tree IDs and sync all of them. Share common logic b/w the new method and
the `SynchronizeTree`.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add the node position in a container and the container size to the CID
descriptor that is passed to the `TreeApply`. Previously, `checkValid` does
not allow any log operarations.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In the 2nd version, there was a database format change: buckets have changed
their keys, so it becomes impossible to check the version in the 1 -> 2+
migrations because of different buckets that store info about the version.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Storage node should not provide NeoFS Object API service when it is
under maintenance.
Declare `Common` service that unifies behavior of all object operations.
The implementation pre-checks if node is under maintenance and returns
`apistatus.NodeUnderMaintenance` if so. Use `Common` service as a first
logical processor in object service pipeline.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
In some scenarios original session can be unrelated to the objects which
are read internally by the node. For example, node requests child
objects when removing the parent one.
Tune internal NeoFS API client used by node's Object API server to
ignore unrelated sessions in `GetObject` / `HeadObject` / `PayloadRange`
ops.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
If shard ID is stored in metabase (it is not the first time boot), read it,
set it, use it (not a generated one) in the metrics writer.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make it store its internal `zap.Logger`'s level. Also, make all the
components to accept internal `logger.Logger` instead of `zap.Logger`; it
will simplify future refactor.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Current spec allows denying GET_RANGE requests from other storage nodes.
However, GET should always be allowed and it is enough to perform
GET_RANGE locally
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
In previous implementation `ObjectService.Get` RPC handler failed with
`parent address in child object differs` while assembling the "big"
object. This was caused by the child check which required parent
reference to be set in all child objects. The check was impracticable
because not all elements of the split-chain have a link to the parent.
Make `execCtx.isChild` to return `true` if parameterized object has no
parent header in its own header.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Node response with `NODE_UNDER_MAINTENANCE` status signals that the node
was switched to maintenance mode. There is a delay between the actual
switch and the reflection in the network map of up to one epoch. To
speed up the reaction to the maintenance, it is required to recognize
such node responses in the Policer.
Make `Policer.processNodes` to exclude elements with shortage decreasing
on `NODE_UNDER_MAINTENANCE` status response.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Nodes under maintenance SHOULD not respond to object requests. Based on
this, storage node's Policer SHOULD consider such nodes as problem ones.
However, to prevent spam with the new replicas, on the contrary, Policer
should consider them normal.
Make `Policer.processNodes` to exclude elements if `IsMaintenance()`
with shortage decreasing.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Make `replicator.TaskResult` to accept `netmap.NodeInfo` type instead of
uint64 in order to clarify the meaning and prevent passing the random
numbers.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
It doesn't make sense to check object relation in session check of
`ObjectService.Put` RPC which has been spawned by `ObjectService.Delete`
with session. Session issuer can't predict identifier of the tombstone
object to be created.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Currently, when removing shard special care must be taken with respect
to shard numbering. `mode: disabled` allows to leave shard configuration
in place while also ignoring it during initialization. This makes
disk replacement much more convenient.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
In previous implementation of `neofs-node` app object session was not
checked for substitution of the object related to it. Also, for access
checks, the session object was substituted instead of the one from the
request. This, on the one hand, made it possible to inherit the session
from the parent object for authorization for certain actions. On the
other hand, it covered the mentioned object substitution, which is a
critical vulnerability.
Next changes are applied to processing of all Object service requests:
- check if object session relates to the requested object
- use requested object in access checks.
Disclosed problem of object context inheritance will be solved within
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
In previous implementation node blocked any operation of local object
storage in maintenance mode. There is a need to perform some storage
operations like data evacuation or restoration.
Do not call block storage engine in maintenance mode. Make all Object
service operations to return `apistatus.NodeUnderMaintenance` error from
each local op.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
After recent Netmap contract changes all read methods which return
network map (either candidates or snapshots) encode node descriptors
into same structure.
Decode `netmap.Node` contract-side structure from the call results.
Replace node state with the value from the `netmap.Node.State` field.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Storage node can be requested to be switched into `MAINTENANCE` state.
Inner Ring should accept such requests only if network configuration
allows it.
Make `Processor` of Netmap contract's notifications to depend on
`state.NetworkSettings`. Make `Processor.processUpdatePeer` to call
`MaintenanceModeAllowed` if notification event relates to `MAINTENANCE`
mode`. Share singe `state.NetworkSettings` provider in Inner Ring
application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After recent changes Netmap contract can send `UpdateState` notification
event with `MAINTENANCE` node's state. There is a need to provide
functionality to work with the status.
Provide `UpdatePeer.Maintenance` method. Support new state in
`ParseUpdatePeer` and `ParseUpdatePeerNotary` functions.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After recent changes in NeoFS protocol storage nodes can be in
`MAINTENANCE` state. There is a need to support this state in
`UpdateState` operation.
Add `UpdatePeerPrm.SetMaintenance` method which makes node to be
switched into `MAINTENANCE` mode after the `UpdatePeerState` operation.
New functionality is going to be used in Storage node application for
Control API serving.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Inner Ring should allow registering of storage nodes with `MAINTENANCE`
state in the NeoFS network only if its configuration allows this status.
Make `networkSettings.MaintenanceModeAllowed` to call
`MaintenanceModeAllowed` method of underlying Netmap contract's client
in order to assert state allowance.
From now nodes will be accepted to the network with `MAINTENANCE` state
only with the appropriate network configuration.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After recent changes in the NeoFS API protocol network configuration
contains `MaintenanceModeAllowed` boolean flag. There is a need to
support the config value in all NeoFS applications.
Provide `Client.MaintenanceModeAllowed` method which read the config
from the Sidechain. Extend `NetworkConfiguration` structure with
`MaintenanceModeAllowed` field.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`NetworkConfiguration` represents NeoFS network configuration stored in
the Sidechain. In previous implementation the configuration missed flag
of disabled homomorphic hashing.
Add `NetworkConfiguration.HomomorphicHashingDisabled` boolean field.
Decode the field in `Client.ReadNetworkConfiguration` method. Print this
value in `netmap netinfo` command of NeoFS CLI.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`readBoolConfig` method is going to be reused for reading other
configuration values. All boolean settings are `false` by default, so it
makes sense to return default value on missing key directly from
`readBoolConfig`.
Handle `ErrConfigNotFound` case in `readBoolConfig` method. Change
`HomomorphicHashDisabled` method to call `readBoolConfig` directly.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to prevent limitless abuse of MAINTENANCE status of the
storage nodes. To do this, configuration of the NeoFS network is going
to be extended with the flag which allows the state. Until this is done,
it makes sense to prepare a site for this in the code.
Define `state.NetworkSettings` interface as an abstraction of global
network configuration within the `state` package. Make
`NetMapCandidateValidator` to depend on `NetworkSettings` and provide
corresponding field setter. Change `VerifyAndUpdate` method's behavior
to return an error for candidates with MAINTENANCE state if this state
is disallowed by the network configuration. Provide `NetworkSettings`
from the wrapper over Netmap contract's client on Inner Ring application
side. The provider is implemented to statically disallow MAINTENANCE
mode in order to save previous behavior.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
New network status of storage nodes is going to be introduced. To
simplify the addition, it would be useful to prepare the code for this.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Inner Ring allowed storage nodes with any
state to register in the network. According to the current design, only
nodes with ONLINE state are allowed to enter the network map.
Create new `state` sub-package of `nodevalidation` package of Inner Ring
application. Define `state.NetMapCandidateValidator` type and provide
`NodeValidator` interface required by the Inner Ring's processor of
`Netmap` contract's notification events. Embed new validator into the
one used by the Inner Ring application.
From now all `AddPeer` notifications with node state other than `ONLINE`
will be denied.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Degraded mode allows us to operate without an SSD,
thus writecache should be unavailable in this mode.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Add a common error for this case because it is not an error
which should increase error counter. Single error simplifies checks on
the call-site.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Negative values have no sense. On the other hand it differs from the
blobovnicza's configuration and prevents unification.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Allow user to initiate flushing objects from a writecache.
We need this in 2 cases:
1. During writecache storage schema update, it should be flushed with
the old version of node and started clean with a new one.
2. During SSD replacement, to avoid data loss.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Replace `ProcessCurrentNetMap` method of `NodeState` interface with
`ReadCurrentNetMap` one with two changes:
* Replace network map type from NeoFS SDK package with the
protocol-generated message. This replaces all the business logic to
the application layer.
* Support error return. This allows to cover problem node states.
Return an error from `NodeState.ReadCurrentNetMap` method implemeted
through `atomic.Value` if `Store` method has not been called yet.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use a simple loop at the callsite. This way we remove as much as we can.
Also, `Delete` metrics is more meaningful now.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
- Meta now supports (and requires) inc/dec labeled counters
- The new logic counter is incremented on `Put` operations and is
decremented on `Inhume` and `Delete` operations that are performed on
_stored_ objects only
- Allow force counters sync. "Force" mode should be used on metabase resync
and should not be used on a regular meta start
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It will allow to use labeled object counters, e.g.: "phy" for all
the physically stored objects, "logic" for only available objects. Also, it
will allow to add typed (regular, TS, SG, LOCK) counters if needed.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not call `CalculateAction` for the eACL checks since it requires object
headers that are meaningless in the tree context.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
1. Do not require a request to be signed by the container owner if a
bearer token is missing
2. Do not check the system role since public requests are not expected to
be signed by IR or a container node (unlike the object requests)
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Sometimes it is useful to track sidechain events processed by the node.
For example, we need some easy way to look up for log messages about new
epoch notifications.
Make `subscriber.Subscriber` to log names of all events received from
the sidechain notification channel.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Re-configuration of Blobovnicza's object size limit must not affect
already stored objects. In previous implementation `Blobovnicza` didn't
see objects stored in buckets which became too big after size limit
re-configuration. For example, lets consider 1st configuration with 64KB
size limit for stored objects. Lets assume that we stored object of 64KB
size, and re-configured `Blobovnicza` with 32KB limit. After reboot
object should be still available, but actually it isn't. This is caused
by `Get` operation algorithm which iterates over configured size ranges
only, and doesn't process any other existing size bucket. By the way,
increasing of the object size limit didn't lead to the problem even in
previous implementation.
Make `Blobovnicza.Get` method to iterate over all size buckets
regardless of current configuration. This covers the described scenario.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Previously, the depth was restricted because with BFS the amount of
nodes we have in memory blows up exponentially. With DFS is is linear,
so we can process trees of arbitrary depth.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Some methods add "IR" suffix to its names in notary enabled envs
because of contract logic. It was broken due to incorrect notary state
reading (tryNotary != notary is enabled).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Set flush mark in the inside the flush worker because writing to the blobstor
can fail. Because each evicted object must be deleted, it is reasonable
to do this in the evict callback.
The evict callback is protected by LRU mutex and thus potentially interferes
with `Get` and `Iterate` methods. This problem will be addressed in the
future.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
There is a need to sync container-related caching mechanism with the
actual Sidechain changes. To do this, node should be able to listen
incoming notifications about container ops.
Define `PutSuccess` / `DeleteSuccess` notification event's parsers.
Subscribe to these events in node app. As initial implementation node
will log event receipts. Later handling is going to be practically
complicated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Maintain an invariant that any blobovnicza is present either
in `opened` or in `active` map. Otherwise, the logic becomes too
complicate because it is not obvious when we should close the blobovnicza.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This check should occur on the shard level, but because
blobstor components expose `Open(readOnly bool)` interface,
it is reasonable to expect an error here.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If the file doesn't exist, return `apistatus.ObjectNotFound`.
First check is still there as a shortcut.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This tests check that each blobstor component behaves similarly when
same methods are being used. It is intended to serve as a specification
for all future components.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Includes:
1. Renaming counter key to distinguish logical and physical objects
2. Version update dropping since changes could be done in a compatible way
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
1. Move compression parameters to the `shard` section.
2. Allow to use multiple sub-storage components in the blobstor.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
1. Remove in-memory cache. It doesn't persist objects and if we want
more speed, `NoSync` option can be used for the bolt DB.
2. Put to the metabase in a synchronous fashion. This considerably
simplifies overall logic and plays nicely with the metabase bolt DB
batch settings.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Allow to extend blobstor with more storage sub-systems. Currently
objects stored in the FSTree have empty byte slice descriptor and object
from blobovnicza tree have the same id as earlier. Each such change in
the identifier formation should be accompanied with metabase version
increase.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Close#1647.
Initially, `Sync: false` was provided because we can already lose
objects cached in memory. However, future changes in writecache will
remove inmemory cache and speed up it via other means.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If an object is found in the Write-cache and is placed at the end of
the in-memory cache, the memory counter update operation tries to
dereference the index that is out of the sliced array. Moreover, even if
panic does not appear, the counter is updated with the wrong value.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Return all the objects on the empty common prefix search without search
optimizations that breaks boltDB logic.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If an object has not been marked for removal by the GC in the current epoch
yet but has already expired, respond with `ErrObjectNotFound` api status.
Also, optimize shard iteration: a node must stop any iteration if the object
is found but gonna be removed soon.
All the checks are performed by the Metabase.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Sort the endpoint by their priority before the first WS client creation to
start the morph client with the highest priority endpoint.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Handling notification in a synchronous manner may lead to a blocking state
if a handler uses neo-go client.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Return listen errors in a synchronous fashion.
Another solution would be to use buffered channel, but this is not
scalable: for each new similar runner we would need to extend the
buffer.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
After a4adb79db new logical error could be returned. Do not increase
error counter in this case.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Also, try to fetch object header info from the local storage to find as much
object info as possible for the requests which do not assume returning
object header as a response.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If metabase can't be opened in the default mode, try opening shard
first in `ReadOnly` mode and then in `DegradedReadOnly`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
`Degraded` mode can be set by the administrator if needed.
Modifying operations in this mode can lead node into an inconsistent state
because metabase checks such as lock checking are not performed.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
There is a need to support working w/o shard if it has problems with
blobovnicza tree.
Make `BlobStor.Init` to return new `ErrInitBlobovniczas` error. Remove
shard from storage engine's shard set if it returned this error from
`Init` call. So if some of the shards (but not all) return this error,
the node will be able to continue working without them.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Reduce public interface of this package. Later each result will contain
an additional status, so it makes more sense to use the same functions
and result processing everywhere.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not check that a node indeed belongs to the container, because the
synchronization will fail in this case anyway.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
1. Modifying operations are not expected to fail, unless the shard is
read-only.
2. `Get*` operations should increase error counter too, unless the
error is `ErrTreeNotFound`.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not return backend type from the service for now, because memory
backend is expected to vanish.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
The tricky part here is the engine itself: we stop iteration on
`ErrReadOnly` because it is better to synchronize the shard later than
to have partial trees stored in 2 shards.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Current implementation prevents invalid operations to become valid at
some later point (consider adding a child to the non-existent parent and
then adding the parent). This seems to diverge from the paper algorithm
and complicates implementation. Make it simpler.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In case node is down or failing for some reason, we can expect `Dial` to
fail. In case we actively try to replicate and `Dial` always takes 2
seconds, replication-related channels quickly become full. That affects
latency of all other write operations.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Before this commit the replication channel was quickly filled under
heavy load. This lead to the continuously increasing latency for all
write operations. Now it looks better.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Also fix a bug with replicator using the multiaddress instead of
<host>:<port> format expected by gRPC library.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Currently to find a node by path we iterate over all the children on
each level. This is far from optimal and scales badly with the number of
nodes on a single level. Thus we introduce "indexed attributes" for
which an additional information is stored and which can be use in
`*ByPath` operations. Currently this set only includes `FileName`
attribute but this may change in future.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Consider a node `{FileName: "dir", Attribute: "xxx"}`. In case we add
a new node by path `["dir", "file.txt"]`, create a new intermediate node
with a single attribute.
`GetByPath` now also considers only nodes with a single attribute while building a path.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In this commit we implement algorithm for CRDT trees from
https://martin.klepmann.com/papers/move-op.pdf
Each tree is identified by the ID of a container it belongs to
and the tree name itself. Essentially, it is a sequence of operations
which should be applied in chronological order to get a usual tree
representation.
There are 2 backends for now: bbolt database and in-memory.
In-memory backend is here for debugging and will eventually act
as a memory-cache for the on-disk database.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Replace `ErrRangeOutOfBounds` error from `pkg/core/object` package with
`ObjectOutOfRange` from `apistatus` package. That error is returned by
storage node's server as NeoFS API statuses.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Shard is intended to be used as a separate failure domain,
which usually resides on a separate disk. Thus, sequential
initialization is bound by IO and this change speeds up thing a bit.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not calculate and do not write homomorphic hash for containers that were
configured to store objects without hash.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not use homomorphic hash in storage group for containers that have
`homomorphic_hashing_disabled` set to `true`.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If the container ID is not nil and not equal to the container ID in the
request, consider bearer token invalid.
See also nspcc-dev/neofs-api#207.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Allocate memory only if a node chosen as the forwarded request receiver
has responded with a successful status.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After fixing version fields in forwarded requests, a node does not check
statuses since errors are not covered by direct call error checks.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Error checkers now support wrapped errors so there is no need to
explicitly unwrap errors in `Policer`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Forwarded requests contained zero version in their meta header. It did not
allow responding with API statuses (`v0.0` version considered to be older
than `v2.11`) to the forwarding node and, therefore, did not allow analyzing
responses.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`auditor` does not need to request SG: processor will fetch that info before
audit context initialization.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
That allows using `ClientCache` for storage group searching before task
context is initialized. Also, that makes it more general purpose.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not use `Marshal()` with object's payload. Use `ReadFromObject` func from
SDK instead. That allows checking both attributes and SG body's expiration
epoch.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After recent changes in NeoFS SDK Go library session tokens aren't
embedded into `container.Container` and `eacl.Table` structures.
Group value, session token and signature in a structure for container
and eACL.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The main problem is to distinguish the case of initial initialization
and update from version 0. We can't do this at `Open`, because of
`resync_metabase` flag. Thus, the following approach was taken:
1. During `Open` check whether the metabase was initialized.
2. Check for the version in `Init` or write the new one if the metabase
is new.
3. Update version in `Reset`.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
After recent changes `buildContainer` method returns two-dimensional
slice of `NodeInfo` so there is no need to flatten it to build slice of
`common.NodeInfo`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `ReadNetworkConfiguration` method to return `NetworkConfiguration`
by value in order to follow storage engine improvements and prevent heap
escaping.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Netmap` contract exports enumeration of the node states.
Replace using literals and constants from NeoFS API Go V2 with the
values provided by contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Cache object that are being processed. That prevents concurrent
object handling when there is a few number of objects and object handling
takes more time that the policer needs for starting that object handling one
more time.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If placement contains two vectors with intersecting nodes it was possible to
send the object to the nodes twice.
Also optimizes requests: do not ask about storing the object twice from the
same node.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The node does not support asynchronous object replication anymore, so it
does not need to have replicator worker, channel and `AddTask` function.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In case we have lots of objects in a single container,
`GetContainerNodes` invoked indirectly by a policer can be seen in
pprof.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In previous implementation `verifySignature` method of container
processor worked incorrectly for operations without a key and with
session: processor tried to verify signature with one of the bound owner
keys instead of session one.
Use `VerifySessionDataSignature` method to check the signature if
session is used. Refactor `verifySignature` a bit with session check
highlighting for readability.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In order to extend container ACL `F` bit must be set in basic ACL.
Make `Container` contract processor to deny eACL tables bound to
non-extendable containers.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Log errors for network operations. The only places where we are not
interested in errors are `Submit` in pool and unmarshaling.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Node shouldn't perform eACL verification during GET/HEAD request
processing until full object header is received. Otherwise, for some
eACL tables request may be falsely rejected.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Scenario:
* HEAD request of some object
* 1st eACL record allows op for objects with specific user attribute
* 2nd eACL record forbids op by object ID
* node doesn't store the requested object locally
With this scenario node shouldn't deny request.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
It is redundant to process object headers in responses w/o object field
since result will be the same.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Request processing should not be interrupted in case of local storage
failure since error case in normal for relay nodes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
ACL service should not deny request on local storage failure since in
this case relay nodes won't be able to continue the operation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
It is useless process since subnet owner is able to delete subnet without an
Alphabet approval. The Alphabet should only validate netmap state after
removal:
1. Update nodes' attributes if they were included in the deleted subnet;
2. Remove nodes without any subnet entrance.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`log.With` is suitable during initialization, but in other places it induces
some overhead, even when branches with logging are not taken.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
If we should process address based on some condition, there is no need
to read file content in memory.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Currently we use `(*bbolt.Bucket).Stats().KeyN` for estimating database
size. However, it iterates over all pages in bucket and thus heavily
depends on the bucket size. This commit replaces initial size estimation
with a single `os.Stat` call.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Core changes:
* avoid package-colliding variable naming
* avoid using pointers to IDs where unnecessary
* avoid using `idSDK` import alias pattern
* use `EncodeToString` for protocol string calculation and `String` for
printing
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Helper function `client.IsErrObjectNotFound` doesn't support error
unwrapping, so we need to do it on caller side.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Policer` should pass list of selected candidates into `WithNodes`
method of `replicator.Task`. In previous implementation `processNodes`
method passed an opposite list: failed nodes and/or the local one.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Not all the NeoFS requests must contain OID in their bodies (or must NOT
contain them at all). Do not pass object address in helper functions, pass
CID and OID separately instead.
Also, fixed NPE in the ACL service: updated SDK library brought errors
when working with `Put` and `Search` requests without OID fields.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In previous implementation `Policer` considered local object copy as
redundant on processing single placement vector.
Make `Policer` to call redundant copy callback after full placement
processing. Also fix 404 error parsing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call `UpdateStateIR` and `AddPeerIR` method instead of `UpdateState` and
`AddPeer` if calling client is configured as Alphabet in notary enabled
environment.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Parse all headers beforehand and reject invalid requests.
Another approach would be to remember the error and check
it after `CalculateAction`, which is a bit faster.
The rule of thumb here is "first validate, then use".
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
It is nice to have different paths for different components and also
check that the information returned is different for different shards.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In previous implementation NeoFS CLI app used `network.Address.HostAddr`
as a server URI, which caused scheme loss since host address doesn't
contain it.
Rename `HostAddr` to `URIAddr` and make it to return URI address with
`grpcs` scheme if TLS is enabled. Make `TLSEnabled` unexported since it
was used to provide default `tls.Config` only (it is used by default in
SDK).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
- Delete objects physically on tombstone's arrival;
- Store information about tombstones in the Graveyard;
- Clear Graveyard every epoch based on the information about TS in the
network.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The service fetches tombstones from the network via object service, every
request is handled in the following order:
1. checks local LRU cache;
2. checks local storage engine;
3. tries to find object in the placement nodes.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add offset element to the iterations over deleted objects (both the
Graveyard and the Garbage buckets).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It allows storing information about object in both ways at the same time:
1. Metabase should know if an object is covered by a tombstone (that is
not expired yet);
2. It should be possible to physically delete objects covered by a
tombstone immediately (mark with GC) but keep tombstone knowledge.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Morph "NewEpoch" event handling was registered in a closure over
`addNewEpochNotificationHandler` func. That may lead to the data race:
if a shard was initialized before the event registration, everything works
as planned, but if registration was made earlier, it was not able to
include GC handlers since a shard has not called `eventChanInit` yet and,
therefore, it has not registered handler yet.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add worker pool to the listener to prevent blocking. It is used only for
notary notifications and new block events handling since it uses RPC
calls. That may lead to the deadlock state: neo-go cannot send RPC until
notification channel is read but notification channel cannot be read since
neo-go client cannot send RPC.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Updated client now supports subscription to chain notifications and RPC
switch between provided RPC endpoints.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Provide current heights as an argument to ticker.
Zero height disables any checks, thus corresponding to the old
behaviour. If non-zero height is used, ignore the tick if the height
is less than the timer tick state.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
After `Listen` has raw receiver and calls `listen` which has pointer
receiver, leading to ineffectual assign to `started` field.
Always use `listener` by pointer, to avoid similar bugs.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
When IR node configured without main chain, both
`morphListener` and `mainnetListener` are pointing
into single listener component. We should not call
`Stop()` twice, because it may trigger channel
closing in neo-go or other components and it
can throw panic.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Prevent attemts to connect to the failing endpoint multiple times.
This speeds up all invocations a bit and removes excessive error logs.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Also, remove optimization comments:
1. Having to maintain an execute the same logic for headers as for
objects is quite inefficient, as it increases memory footprint.
2. Unmarshaling object is a cheap operation if data slice is in memory.
3. For unmarshaling header-only, I think we need SDK support.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
`Degraded` mode is set automatically after error counter is over the
threshold. `ReadOnly` mode can still be set by an administrator.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Add `WithEncryption` option that passes ECDSA key to the persistent session
storage. It uses 32 bytes from marshalled ECDSA key in ASN.1 DER from in
AES-256 algorithm encryption in Galois/Counter Mode.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Move in-memory session storage to the separate directory of `storage`. It is
done for future support of different kind of session storages.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`Batch` can execute the function multiple times leading to multiple
increases of a size approximation.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Alphabet nodes in notary enabled environment cannot call `UpdateState`
method to remove unwanted storage nodes from the network map,
because this method checks witness of the storage node.
To force storage node state update, alphabet nodes should invoke
new method `UpdateStateIR` which is similar to `AddPeerIR`.
State update initiated by the storage node itself is processed
the same way as before -- alphabet nods resign such transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`Register` was renamed to `AddPeerIR` for consistency with
`UpdateState` changes in
https://github.com/nspcc-dev/neofs-contract/pull/227
This is protocol breaking change for notary enabled environment.
Luckily, there is no notary enabled environments anywhere except
of neofs-dev-env, so we can do such thing. We should avoid such
changes in the future, though.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`apistatus` package provides types which implement build-in `error`
interface. Add `error of type` pattern when documenting these errors in
order to clarify how these errors should be handled (e.g. `errors.Is` is
not good).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Return `apistatus.ObjectAccessDenied` error on access violation from ACL
service. Write reason in format of the errors from the previous
implementation. These errors are returned by storage node's server as
NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `core/container.ErrNotFound` error returned by `Source.Get`
interface method with `apistatus.ContainerNotFound` status error. This
error is returned by storage node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `ErrNotFound`/`ErrAlreadyRemoved` error from
`pkg/core/object` package with `ObjectNotFound`/`ObjectAlreadyRemoved`
one from `apistatus` package. These errors are returned by storage
node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Return `SessionTokenExpired`/`SessionTokenNotFound` error from
`apistatus` package if private session token is expired/missing. These
errors are returned by storage node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make all epoch independent in reputation process. Do not reset any timers
related to reputation. Make it possible to finish iteration after the
unexpected `NewEpoch` event.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
There is a need to process expired `LOCK` objects similar to `TOMBSTONE`
ones: we collect them on `Shard`, notify all other shards about
expiration so they could unlock the objects, and only after that mark
lockers as garbage.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation `SignService` converted all `error` values to
`INTERNAL` server failure status. That was done for simplification only.
There is a need to transmit status errors as corresponding status
messages.
Make `SignService` to unwrap errors and convert them to status message
during writing to the response. Non-status errors are converted to
`INTERNAL` server failures. Status errors can also be wrapped in the
depths of the executable code, so `SignService` tries to unwrap them.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `FormatValidator.ValidateContent` to verify payload of `LOCK`
objects. Pass locked objects to `Locker` interface. Require from
`Locker.Lock` to return `apistatus.IrregularObjectLock` error on a
corresponding condition.
Also add error return to `DeleteHandler.DeleteObjects` method. Require
from method to return `apistatus.ObjectLocked` error on a corresponding
condition. Adopt implementations.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Inhume` operation can potentially mark lockers as garbage. There is a
need to update locker list in locked bucket.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `StorageEngine.Delete` to forward first encountered
`apistatus.ObjectLocked` error during shard processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `StorageEngine.Inhume` to forward first encountered
`apistatus.ObjectLocked` error during shard processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `StorageEngine.Lock` method which works similar to `Inhume`
but calls `Lock` on the processing shards.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `DB.Lock` to return `apistatus.IrregularObjectLock` if at least one
of the locked objects is irregular (not of type REGULAR).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `DB.Inhume` to return `apistatus.ObjectLocked` if at least one of
the inhumed objects is locked.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `DB.IterateCoveredByTombstones` to not pass locked objects to the
handler. The method is used by GC, therefore it will not consider locked
objects as candidates for deletion even if their tombstone is expired.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `DB.IterateExpired` to not pass locked objects to the handler. The
method is used by GC, therefore it will not consider them as candidates
for deletion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After introduction of LOCK objects (of type `TypeLock`) complicated
extended its behavior:
* create `lockers` container bucket (LCB) during PUT;
* remove object from LCB during DELETE;
* look up object in LCB during EXISTS;
* get object from LCB during GET;
* list objects from LCB during LIST with cursor;
* select objects from LCB during SELECT with '*'.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `DB.Lock` method which marks list of the objects as locked by
another object. Only regular objects can be locked.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Create class of container buckets with `LOCKED` suffix. Put identifiers
of the objects of type `LOCK` to these buckets during `DB.Put`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After `putsvc.Service` started to support additional container broadcast
of the saved objects there is no more need to perform broadcast of
tombstone object in `deletesvc.Service`.
Make `putsvc.Service` to perform additional broadcast of `TOMBSTONE`
objects. Remove `broadcastTombstone` stage from `deletesvc.execCtx`,
from now it is encapsulated in `saveTombstone` stage. Remove no longer
needed `putsvc.PutInitPrm.WithTraverseOption` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There are several cases when we need to spread the object around the
container after its primary placement (e.g. objects of type TOMBSTONE).
It'd be convenient to support this feature in `putsvc.Service`.
Add additional stage of container broadcast after the object is stored.
This stage is carried out no more than once and does not affect the
outcome of the main PUT operation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make all operations that related to `neofs-api-go` library be placed in `v2`
packages. They parse all v2-versioned structs info `neofs-sdk-go`
abstractions and pass them to the corresponding `acl`/`eacl` packages. `v2`
packages are the only packages that do import `neofs-api-go` library. `eacl`
and `acl` provide public functions that only accepts `sdk` structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Remove `Object` and `RawObject` types from `pkg/core/object` package.
Use `Object` type from NeoFS SDK Go library everywhere. Avoid using the
deprecated elements.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Similarly to `Get`. Also fix a bug where `ErrNotFound` is returned
instead of `ErrRangeOutOfBounds`.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Metabase is expected to contain actual information about objects stored
in shard. If the object is present in metabase but is missing from
blobstor, peform an additional attempt to fetch it directly without
consulting metabase. Such a situation is unexpected, so error counter
is increased for the shard which has the object in the metabase. We
don't increase error counter for the shard which has the object in
blobstor, because some garbage can be expected there. In this
implementation there is no overhead for objects which are really
missing, i.e. are not present in any metabase.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
There are certain errors which are not expected during usual node
operation and which tell us that something is wrong with the shard.
To prevent possible data corruption, move shard in read-only mode after
amount of errors exceeded some threshold. By default no actions are performed.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In some places we panic, in some we return error, in some (audit) just return a client.
However in all of the places static client is created immediately before
the sugared-client creation.
This commit makes all constructors to just return a client for the sake
of code simplification and unification.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
We don't use custom names and the only place where custom method option
is used it provides the default name and can be omitted.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
If pre-existing blobovnicza is initialized, it's size should be updated
even if all buckets are in place.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
It was added back in 2fb379b7 when we had many shard modes. Now we have
only two and comments for constants are rather descriptive.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In previous implementation IR incorrectly verified `SetEACL` event of
`Container` contract. The incorrect behavior could be reproduced in two
ways:
1. Create container using session, and perform `SetEACL` operation
with a key that is different from the session one.
2. Create container using session, and perform `SetEACL` w/o a
session, but sign it using session key from the `Put` operation.
The problem was in the `checkSetEACL` validation method of IR container
processor. It always used session token used for container creation
during session ownership check.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
We could also ignore errors during evacuate, but this requires
unmarshaling objects first which slowers the process considerably.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In read-only mode modifying operations are immediately returned with
error and all background operations are suspended.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Dump contains magic and a list of objects prefixed by object size in bytes.
We can't use proto-marshaled list because this requires having all dump
in memory. Using TAR induces 512 byte overhead for each object which can
be a problem in some cases.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
- Update `neofs-sdk-go`:
v0.0.0-20211230072947-1fe37df88f80 => v0.0.0-20220113123743-7f3162110659
- Add client interface that duplicates SDK's client behaviour and new
`MultiAddressClient` interface that has method that iterates over wrapped
clients.
- Also start using simple client mode that does not require parsing statuses
outside the SDK library.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
For some data compression makes little sense, as it is already compressed.
This commit allows to leave such data unchanged based on `Content-Type`
attribute. Currently exact, prefix and suffix matching are supported.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Reverse payload overtake triggers direct payload overtake that
sets status and error. We should not override that.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
It is much more convenient to skip source creation.
Also fix some bugs:
1. `cryptoSource.Int63()` now returns number in [0, 1<<63) as required
by `rand.Source` interface.
2. Replace `cryptoSource.Uint63()` with `cryptoSource.Uint64` to allow
generate uint64 numbers directly (see rand.Source64 docs).
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Indent sections corresponding to different shells for faster navigation
and remove `#` at the line beginning.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
If mainchain is disabled in IR config then the node should read inner
ring list via role management contract.
Use `NeoFSAlphabetList` method of morph client as IR lister if
`withoutMainNet` flag is set in IR app.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation `Search` method of transport splitter skipped
responses with empty ID list.
Replace while-loop with do-while one in `TransportSplitter.Search`
method implementation in order to send responses with empty result too.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Provide shard mode information via `DumpInfo()`. Delete atomic field from
Shard structure since it duplicates new field.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Shard's mode was not used in the Node, so added only two modes whose roles
are clear. More modes will be added in the future.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Without sanity check, container service provides successful response,
even though such request will never be approved by Alphabet nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
When application is being terminated, replicator routine
might be on the object picking phase. Storage is terminated
asynchronously, thus `Select()` may return corresponding
error. If we don't process `context.Done()` in this case,
then application freezes on shutdown.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Make `flushBigObjects` routine to mark objects which are written to
`BlobStor`. This prevents already flushed objects from being written on
the next iterator tick.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
For fullness estimation of `Blobovnicza` we use number of object stored
in each size bucket. In previous implementation we multiplied the number
by the difference in bucket boundaries. This expression rather
estimated the minimum volume (and for the smallest bucket, the maximum)
of objects in the bucket.
Multiply number of objects by mean bucket size.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `syncFullnessCounter` to accept `bbolt.Tx` argument of Bolt
transaction within which counter should be synchronized. Pass
corresponding transaction during `Init`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In notary disabled environment, approval of container creation with nice
name attribute takes much more additional GAS than other operations
(due to NNS invocation).
Morph library changes:
* add the ability to specify per-op fees using `StaticClient` options;
* add the ability to customize fee for `Put` operation with named
container in container morph client.
Inner Ring changes:
* add `fee.named_container_register` config value which specifies
additional GAS fee for the approvals of the named container
registrations;
* pass the config value to `WithCustomFeeForNamedPut` option of
container morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
According to BoltDB documentation bucket `value is only valid for the
life of the transaction`.
Make `DB.IsSmall` copy value slice in order to prevent potential memory
corruptions (e.g. `runtime.stringtobyteslice` cast).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After https://github.com/nspcc-dev/neofs-contract/issues/154 alphabet
nodes should call `Register` method for approval of the notary
notifications spawned by `AddPeer` method.
Call `register` method for peer approval in Netmap processor.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Notary event name equals to the name of the method which throws the
event.
Define name const of notary subnet creation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use persistent flags on parent command in order to inherit flags in
sub-commands. Turn on notary mode of morph client in `subnet` command of
admin utility for notary environments.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Client.EnableNotarySupport` method to call `NNSContractAddress`
for proxy contract if it is not specified in corresponding option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `subnet` command which contains all subnet-related commands. Add
sub-commands:
* `create` for creation;
* `remove` for removal;
* `get` for reading;
* `admin` for admin management;
* `client` for client management.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define notification events, implement parsers. Add morph client of
Subnet contract. Listen, verify and approve events in Inner Ring app.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Continues replication executed in separate pool of goroutines,
so there is no need in worker to handle replication tasks
asynchronously.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Upgrade NeoFS API Go library to version with status returns. Make all API
clients to pull out and return errors from failed statuses. Make signature
service to respond with status if client version supports it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
ListWithCursor allows listing physically stored objects
from metabase with small chunks. Cursor tracks last
processed object, therefore new chunks are returned
on each request.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add hash of the TX that generated notification
to neofsid event structures. Adapt all
neofsid wrapper calls to new structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add hash of the TX that generated notification
to neofs/netmap event structures. Adapt all
neofs/netmap wrapper calls to new structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Parsers should have original notification
structure to be able to construct internal
event structure that contains necessary
for unique nonce calculation information.
So notification parsers take raw notification
structure instead of slice of stack items.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make `BlockExecution` / `ResumeExecution` to not release per-shard worker
pools. Make `StorageEngine.Close` to block these methods and any
data-related operations. It is still releases the pools.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use `sync.Once` to prevent locks of stopping GC. It will also allow to
safely call `Shard.Close` multiple times.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `MAINTENANCE` value to `NetmapStatus` enum in Control API. The status is
going to be used to toggle maintenance mode of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to disable execution of local data operation on storage
engine in runtime. If storage engine ops are blocked, node will act like
always but all local object operations will be denied.
Implement `BlockExecution` / `ResumeExecution` methods on `StorageEngine`
which blocks / resumes the execution of data ops. Wait for the completion of
all operations executed at the time of the call. Return error passed to
`BlockExecution` from all data-related methods until `ResumeExecution` call.
Make `Close` to block operations as well.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation IR handler of `AddPeer` notification didn't send
registration to contract if existing peer changed has changed its
information. as a consequence, the network map members could not update the
information without going into offline.
Change `processAddPeer` handler to check if
* candidate in the network map is a brand new
* or information about the network map member was changed
and call `AddPeer` method if so.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All objects in NeoFS must have owner ID. In previous implementation Object
Delete service handler set owner ID from request session token. If removal
was executed w/o a session, object with tombstone was prepared incorrectly.
In order to fix this node should set its own ID and become an owner of the
tombstone object.
Extend `NetworkInfo` interface required by Object.Delete handler with
`LocalNodeID` method which returns `owner.ID` of the local node. Implement
the method on `networkState` component of storage node application which is
updated on each node state change in NeoFS network map. Set owner returned
by `LocalNodeID` call as tombstone object's owner in Delete handler.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node returns "access denied" on Object.Put with
object with unset owner. Although object owner must be set, its absence
should not be considered as access error. The same applies to sender key.
Check owner ID and public key emptiness only if sticky bit is set.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Also, add ErrNNSRecordNotFound error that
indicates that required hash is not presented
in `NNS` contract.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The client needs of the Object service are limited and change not often.
Interface changes of the client library should not affect the operation of
various service packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the Object service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Timer is not suitable for notary deposits because it can never fire
in case of desynchronization or external epoch changes. Notary deposits
must be handled on new epoch event.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
a1696a8 introduced some logic which in some situations prevented big objects
to be persisted in FSTree. In this commit a refactoring is done with the
goal of simplifying the code and also checking #866 issue.
1. Split a monstrous function into multiple simple ones: memory objects
can only be small and for writing through the cache we can do a dispatch
in `Put` itself.
2. Determine objects to be put in database before the actual update
as setting up a transaction has non-zero overhead.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
The client needs of the IR application are very limited and rarely change.
Interface changes of the client library should not affect the operation of
various application packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the IR application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no point to pass key storage in parameters because
it can be defined on the service level of application.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`CommonPrm` structure has private key for remote operations.
It obtained in the beginning of request processing. However,
not every operation triggers remote calls. Therefore, key
might not be used. It is important to avoid early key fetching
because `TokenStore` now returns error if session token does not
exist. This is valid case when container nodes receive request with
session token (for ACL pass) and they should process request locally.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This is invalid operation for storage nodes that receive part of split
object. While object is signed by session token, the message itself
should be signed by the node key.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Container listing should not ignore tombstone and
storage group objects which are not stored in
primary buckets.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Do not set `till` as some constant:
use maximum of two values instead:
1. currentDepositTill;
2. currentHeight+epochDuration+constant.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Some of the pools are initialized during config initialization,
so it isn't possible currently to release them in one place.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Add name and zone arguments to `Put` method of wrapper over the Container
contract client. Pass result of `container.GetNativeNameWithZone` function
to the method in `Put` helper function. Due to this, the storage node will
call the method depending on the presence of the container name in the
attributes.
Make IR to listen `putNamed` notification event. The event is processed like
`put` event, but with sanity check of the container attributes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `PutArgs.SetNativeNameWithZone` method which sets native name and zone
for container. Call `putNamed` method of Container contract if name is set,
otherwise call `put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `ParsePutNamedNotary` function which parses `PutNamed` structure
from `event.NotaryEvent`. Share common code with `ParsePutNotary` function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `PutNamed` structure of notary notification from `putNamed` method of
Container contract. Embed `Put` type in order to inherit methods and
parsing of common parts with `put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `StringFromOpcode` function that tries to retrieve `string` to
`Op`. Add a comment about neo-go source code that is used for implementation
of converters.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`WSClient` of Neo Go v0.97.3 sets value of notification with
`NotificationEventID` to `subscriptions.NotificationEvent` type which wraps
previously used `state.NotificationEvent`.
Change type cast and pull `state.NotificationEvent` structure from new type.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make the implementation of network info source (Netmap V2 service
dependency) to read MillisecondsPerBlock sidechain parameter and NeoFS
network parameters depending on the client version.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Client.ListConfig` method which calls `listConfig` method of
Netmap contract. Implement `Wrapper.IterateConfigParameters` method which
uses previous one. Implement `wrapper.WriteConfig` helper function which
allows to interpret parameters by names.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
