Commit graph

965 commits

Author SHA1 Message Date
Leonard Lyubich
8419294f22 [#328] container/load: Implement AnnounceUsedSpace NeoFS API v2 RPC handler
Implement processing of AnnounceUsedSpace RPC from NeoFS API v2 method on
the app-side according to the following algorithm (except common steps for
each RPC):

 * check if the request sender is presented in container;
 * check route of the request (compose from signatures);
 * pass the value to Writer returned by WriterProvider.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
10902c0b82 [#328] container/load: Implement RemoteWriterProvider for controller
Define component on app-side that implements RemoteWriterProvider with next
logic:

 * if ServerInfo is nil, call internal dead end provider;
 * if address in ServerInfo equals to local node's address, do nothing;
 * otherwise create API client instance via client cache and return the
   wrapper over it.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
1bed03995b [#328] container/load: Implement Iterator on local storage engine
Implement wrapper over StorageEngine on app-side that iterates over the
values returned by ListContainers+ContainerSize method pair. Component will
be used as the source of local metrics.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
910017b72f [#328] container/load: Implement PlacementBuilder for used space router
Implement wrapper over netmap and container storages on app-side that builds
placement vectors by next steps:

 * read container from storage;
 * read network map from storage by epoch number;
 * build container nodes according to placement policy;
 * build placement vectors with epoch-dependent pivot.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
6f552c8599 [#328] container/load: Implement WriterProvider on API client
Implement wrapper over API client on app-side that passes used space values
to it. Values are buffered on Put call and sent on Close call.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
fa685160f9 [#328] container/load: Implement Writer on Container contract's client
Implement wrapper over Container contract's client on app-side that passes
used space values to it. Uses a fixed public key, whose value will be the
key of the local storage node.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
21133aee2f [#328] container/load: Implement route builder based on placement
Implement route Builder interface on wrapper over the container placement
builder, Component implies exactly one transfer to each of the most weight
nodes of the container (according to some weighing algorithm).
Implementation is planned for use when transferring local estimates of
storage nodes.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
d48fb81193 [#328] container/load: Implement route controller
Implement a component for transmitting the value of the used container space
along a route defined in the system. Implement WriterProvider interface on
it. By implementation, it is the link between the route planner and the
point-to-point transmitter, and abstracts from the implementation of both of
them. In the future, this implementation will be used as a transmitter of
local estimates of storage nodes among themselves.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
1c6d37e821 [#328] morph/container: Add client methods related to size estimations
Implement API methods of the Container contracts client  corresponding
to the calls of the contract for storing the used space of the container
("putContainerSize", "getContainerSize", "listContainerSizes"). Extend
the wrapper over the client with methods abstracted from sidechen calls.
In particular, the method of storing the value will be used to record
the estimates of the used space of containers calculated by the network
participants.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
4415f8dc5b [#328] container/load: Implement simple Iterator and Writer providers
Implement functions to wrap Writer or Iterator. The resulting wrapper
provides WriterProvider or IteratorProvider interface respectively.
Such a wrapper can be used as a single storage instance provider
regardless of context.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
2622e11ae3 [#328] container/load: Implement local storage of used space announcements
Implement a component that stores the values of the used space of
containers. The storage allows you to write several values for a fixed
container and epoch number, and read the averaged estimates of all
accumulated values. All values are stored in memory. This component is
planned to be used as an accumulator of opinions from various network
participants about the fullness of the container.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Leonard Lyubich
cc88320d6b [#328] container/load: Implement a metrics exchange controller
Implement a component that connects the value stores of the used space of
containers. Implement the Start/Stop operations on it, which will later
become the application handlers of the corresponding events from the
sidechain. The main task of the controller is to temporarily synchronize the
stages of calculating the global estimate of the used space in the
container. The details of the score calculation (the way of collecting /
transmitting local scores, the final score formula and writing to the
contract) are encapsulated in the dependency components, the controller is
abstracted from them.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-02-02 15:45:04 +03:00
Alex Vanin
5b550bff22 [#355] innerring: Produce container size estimation notifications
There are two notifications:
- start estimation notification produced at the beginning of the
  epoch,
- stop estimation notifications should be produced before
  basic audit settlement starts.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
6848a816f9 [#355] innerring: Refactor block timer constructors
This small refactoring adds `blocktimer.go` file with
all timer related function and constructors. This way
we can create all timers in one place (at the end of
innerring.Server constructor).

To do that we had to move timer reset into global
server state so it can be accessed by netmap
processor.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
402192c8c4 [#355] innerring: Add fee to NoFee wrappers
There is no point of making separate `Fee` and `NoFee`
wrappers because all reading operations are free disregarding
of fee value in static client. However we can use these same
wrappers so send transaction.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
70aa73cbd2 [#355] moprh/client: Add start/stop container estimation methods
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
7a7a351f1f [#355] morph/event: Add container estimate size events
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
db94ad5567 [#355] morph/event: Fix delete container event test
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:23:37 +03:00
Alex Vanin
244bcc5c04 [#357] Fix linter issues
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
819300f939 [#326] ir: Add debug message about transfer for audit transaction
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
d4bd726c25 [#326] ir: Make netmap processor to generate audit settlement events
Pass handler of audit settlement event to netmap event processor. Generate
AuditEvent in during new epoch processing.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
4204a9f920 [#326] ir: Implement settlement processor
Define a processor of events related to monetary transactions. Define
audit-related event. Provide an interface for processing the audit payout
event.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
aaeb13f7df [#326] ir: Change construction of Balance contact client
Use client with extraFee instead of readOnlyFee. Rename
NewNoFeeBalanceClient to NewBalanceClient since no-fee client is no longer
used.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
a6785c1585 [#326] ir/timers: Remove println from unit test
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
a6a5a84f36 [#326] settlement/audit: Prevent negative amount arguments of Exchanger
Do not pass zero transfers from the calculation table to Exchanger. Revert
transfers with negative amount since Exchanger interface requires positive
amounts of funds.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
2bca5879cd [#326] ir/settlement: Move the calculation of the minimum audit fee
Move control of the minimum cost of payment for the audit from the
implementation of the Exchanger to the place where the amount is calculated.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
87c2c3ecc6 [#326] ir: Calculate audit settlements on new epoch
Calculate payments to storage nodes for the passed audit when changing the
epoch. The calculation results are wrapped in a call to the Balance contract
(one transaction per user-to-user transfer).

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
685b593af3 [#326] ir/settlement: Implement calculator of settlements for audit
Implement component that analyzes audit results and generates transactions
for payment of awards for successfully passed audit. When calculating the
total fee, the declared price of the node (attribute) and the total volume
of storage groups, which were successfully audited by the container, are
taken into account. In one call the calculator processes all audit results
for the previous epoch (relative to the calculated parameter).

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
20ad0ae82a [#326] morph/balance: Provide interface to "transferX" method's invocations
Implement TransferX method on Balance contract client. Implement TransferX
method on Balance client's wrapper that encapsulates it's TransferX call.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
f7a9e43165 [#356] ir/blocktimer: Fix reset behavior
In previous implementation handler was not called more the one time after
Reset. It was caused by tick counter not being reset inside Reset method.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Alex Vanin
de1f601765 [#337] engine: Add container listing for both engine and shard
Container listing already supported in the metabase for `engine.List`
operation. To get container statistics engine should provide both the
option to get container volume estimation and list of all containers.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:04:30 +03:00
Alex Vanin
3926e76c32 [#337] engine: Get all container sizes estimation from shards
Objects of one container can be split among shards, so engine
should iterate over all available shards to sum all size
estimations.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:04:30 +03:00
Alex Vanin
dc5a481f17 [#337] shard: Get container size estimation from metabase
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:04:30 +03:00
Alex Vanin
41578001e4 [#337] metabase: Keep container size estimation
Storage nodes keep container size estimation so they
can announce this info and hope for some basic income
settlements. This is also useful for monitoring.

Container size does not include non regular or inhumed
object sizes.

Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
998a097767 [#324] ir: Listen new blocks from main chain
Listen to new blocks from mainnet until the required fix in neo-go lib is
released (https://github.com/nspcc-dev/neo-go/pull/1687).

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
abc7885056 [#324] ir: Register block handler before starting the listening routine
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
44c899b560 [#324] morph/listener: Do not subscribe on new blocks without handlers
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
96f750d9c8 [#324] ir/alphabet: Write error of TransferGas call to log
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
a6517bc877 [#324] ir/netmap: Do not return on block timer restart error
Continue execution of the new epoch handler in case of a failed timer
restart.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
1664cf9869 [#324] morph/subscriber: Init ws client in Subscriber's constructor
Replace WSClient.Init call from the body of BlockNotifications method to
constructor New since Init should be called before working with client
according to neo-go docs.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
ca41810859 [#324] ir: Change level of "new block" log message to debug
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
5e212f97d6 [#324] morph/listener: Prevent potential writing to nil channel
Write error returned by BlockNotifications() call ins listenLoop method body
to error channel only if it is procided. Otherwise, write debug log message.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
96febdb6a5 [#324] morph/subscriber: Make block channel in constructor
Replace block channel's initialization from BlockNotifications method body
to Subscriber's constructor in order to prevent potential writing to nil
channel.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
d01b4e1a2d [#324] ir: Measure GAS emission intervals in sidechain blocks
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
19bb94cc04 [#324] ir: Measure epochs in sidechain blocks
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
b5dc28f79c [#324] ir/timers: Complicate the logic of fractional block intervals
Call handler of the fractional block interval once between base interval
ticks by default. Add option to call handler of fractional block interval
multiple times (N times if fractional interval == BASE_INTERVAL / N).

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
476349dd1c [#324] ir/timers: Implement chain block timer
Implement a timer that can tick chain blocks and perform actions at time
intervals in the blocks.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
23c220ae28 [#324] morph/listener: Register handlers of new chain blocks
Extend Listener with RegisterBlockHandler method. All block handlers are
called on each block read from Subscriber.BlockNotifications channel.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Leonard Lyubich
c65d1d9db9 [#324] morph/subscriber: Subscribe on new chain blocks
Call SubscribeForNewBlocks in Subscriber's constructor. Provide
BlockNotifications interface method that returns block channel. Write new
blocks to the channel on notification events with BlockEventID type.

Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
2021-01-29 11:04:30 +03:00
Alex Vanin
65eca6077e Update docker-compose testnet config to latest image
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
2021-01-27 21:24:14 +03:00