From `017fb6abed9455c7c99631adcb0bb04d42741f87` used container client is
constructed with enabled notary mode.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Approved removed container ID should be stored in sidechain along with
related session token.
Forward session token from `Delete` event to `Wrapper.Delete` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Delete` method of latest `Container` contract accepts binary session token
as an argument.
Provide `DeleteArgs.SetSessionToken` method. Accept session token as a
`[]byte` in `Wrapper.Put` method and attach it to `PutArgs`. Marshal session
token from `RemovalWitness` in `wrapper.Delete` function and pass it to the
method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Approved eACL table should be stored in sidechain along with related session
token.
Forward session token from `SetEACL` event to `Wrapper.PutEACL` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`SetEACL` method of latest `Container` contract accepts binary session token
as an argument.
Provide `SetEACLArgs.SetSessionToken` method. Accept session token as a
`[]byte` in `Wrapper.PutEACL` method and attach it to `SetEACLArgs`. Marshal
session token from container in `wrapper.PutEACL` function and pass it to
the method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Approved container should be stored in sidechain along with related session
token.
Forward session token from `Put` event to `Wrapper.Put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Put` method of latest `Container` contract accepts binary session token as
an argument.
Provide `PutArgs.SetSessionToken` method. Accept session token as a `[]byte`
in `Wrapper.Put` method and attach it to `PutArgs`. Marshal session token
from container in `wrapper.Put` function and pass it to the method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Construct wrapper over the Container contract client with `TryNotary` option
since it is required to perform invocations of notary contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Owner identifier can be calculated from public key. If it matches, no
additional verification of key ownership is required.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Get all owner keys and verify container ID signature until first success. If
none of the keys match, then prohibit deletion. Thus, the delete operation
is only allowed to the owner of the container. With this approach, a
separate check for key ownership is not required.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Get` method of the wrapper over Container contract's client to
accept binary container ID. Create `Get` function similar to the previous
`Get` variation. Use this function in Container service server in the place
where `Get` method was used.
Additionally implement `AsContainerSource` function which allows
to simply compose container Source interface from the wrapper.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call `Delete` method on the wrapper over the Container contract's client
directly from `Processor.approveDeleteContainer`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call `Put` method on the wrapper over the Container contract's client
directly from `Processor.approvePutContainer`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Split up `processContainerPut` and `processContainerDelete` methods of
container `Processor` into two sub-methods: checking the event and its
assertion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Morph event structures defined in `pkg/morph/event` should only carry
notification values without any additional interpretation. All logical work
should be concentrated on app-side.
Change data type of `Put.PublicKey` return to byte slice. `ParsePut` doesn't
unmarshal public key from now.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `setEACL` notification event parser (handler) to the return of the
`ListenerParsers` (`ListenerHandlers`) method. Read address of NeoFS ID
contract from `contracts.neofsid` config. Implement `NewNeoFSIDClient`
constructor in `invoke` package and use it in IR application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Pre-allocate slices for a known number of elements. Use single `ParserInfo`
/ `HandlerInfo` variable in order to set Container contracts's address once
and change only values that differ between events.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use NeoFS ID contract client to check if public key from notification event
is tied to the owner of the container for which the eACL is being changed.
Approve changes coming from the owner of the container only.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add signature check to `checkSetEACL` method of the `setEACL` notification
handler in Container processor.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `handleSetEACL` method similar to other handling methods in
Container processor. To begin with, the validation logic is skipped, and all
tables will be sent to the contract. In the future, the necessary checks
will be implemented. Listening for events in the IR node will also be added.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
To enable TLS support we can't operate with IP addresses directly.
Certificates are issued with host names so it is required to
pass them into RPC client. DNS resolving should be done by transport
layer and not be a part of node. Therefore `IPAddrString` usage is
removed from code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Processors that use `invoke` package to make chain invocation should provide
fee config and client with enabled or disabled notary support. If notary
support is disabled, then functions from `invoke` package will perform
ordinary method invocation with extra fee.
Processors that use `morph/client` wrappers should check `notaryDisabled`
flag to call corresponding wrapper function.
Netmap processor omits some actions during validator syncronization
if notary is disabled.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Mint, Burn and Cheque details should contain hash of
main net tx of Deposit and Withdraw invocation. They will
be formatted inside the contracts so alphabet nodes must
not modify them.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Unified format uses transfer type as the first byte
and extra details next. List of transfer types used in
contracts defined in `details.go`. It includes:
- audit settlement,
- basic income collection,
- basic income distribution.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This method has been removed from netmap contract. Corresponding
event from neofs contract renamed to AlphabetUpdate and should not
be processed, because alphabet updated from `RoleManagement`
contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
On the `Deposit` events add gas balance check.
Make transfer only if the balance is greater
than the `GasTransferThreshold` that is defined
with environmental variable.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Because options are not used when client is already in cache
providing them to shared cache is misleading at best.
In the worst case `dial_timeout` is set randomly (because of race
condition) which can lead to one service having `dial_timeout` of
another. Thus we set default client creation options when cache is
created.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Previously UN-LOCODE attribute was required for each network map candidate.
In the absence of this attribute, the candidate was not allowed into the
network map. After revising the requirements for candidates, it was decided
not to require the mandatory installation of the attribute by candidates.
From now inner ring does not modify location attributes of the network map
candidate in the absence of UN-LOCODE attribute and does not block entry
into the network map for this criterion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation IR worked with exactly 7 alphabetic contracts
only. Actually number of contracts is limited to only the Glagolitic
alphabet.
Make IR to work with any valid number of alphabetic contracts. Change parser
of alphabetic contract addresses to read amount of processing contracts
before performance. Make Alphabet processor to use interface of the
alphabetic contract group. Use `alphabetContracts` type in IR `Server`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to specify that IR indices are 32 bits in size.
Change return types of `Indexer` interface methods in audit and alphabet
packages. Support interface changes in `Server` implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All node info attribute transformations can't guarantee
the order of attributes. However it should be consistent
otherwise smart-contract won't be able to collect signatures
and approve transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Node info validator may change node attributes, e.g. update
it with human-readable location attributes based on LOCODE.
So inner ring node should provide new node info binary to
smart contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Define a structure for dealing with the geographic location of nodes.
Implement VerifyAndUpdate (with the same purpose as NodeValidator interface)
that checks LOCODE attribute and fills other attributes of the location.
Technically the entity is a wrapper over the NeoFS location database: it
maps the node LOCODE to the database record from which the new attributes
are generated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define NodeValidator interface of the entity that checks and finalizes
NodeInfo structure. Add NodeValidator to Netmap processor. Pass NodeInfo
structures of network map candidates to NodeValidator in order to verify it
and prepare to final state required by network.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Check if `new(big.Int)` will be efficient later and replace
all `big.NewInt()` in code or leave it as it is.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
TxTable used twice in context to transfer assets to
and from banking account. There is no need to store
instance of table persistently.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Some transfers from container owners into bank account may
fail due to lack of assets, so we have to deal with remaining
amount of assets in banking account.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Basic settlement context is a main structure that
implement logic of basic settlement phases: collecting
assets from container owners and then distributing them
to storage nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There are two notifications:
- start estimation notification produced at the beginning of the
epoch,
- stop estimation notifications should be produced before
basic audit settlement starts.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There is no point of making separate `Fee` and `NoFee`
wrappers because all reading operations are free disregarding
of fee value in static client. However we can use these same
wrappers so send transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Pass handler of audit settlement event to netmap event processor. Generate
AuditEvent in during new epoch processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define a processor of events related to monetary transactions. Define
audit-related event. Provide an interface for processing the audit payout
event.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not pass zero transfers from the calculation table to Exchanger. Revert
transfers with negative amount since Exchanger interface requires positive
amounts of funds.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Move control of the minimum cost of payment for the audit from the
implementation of the Exchanger to the place where the amount is calculated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement component that analyzes audit results and generates transactions
for payment of awards for successfully passed audit. When calculating the
total fee, the declared price of the node (attribute) and the total volume
of storage groups, which were successfully audited by the container, are
taken into account. In one call the calculator processes all audit results
for the previous epoch (relative to the calculated parameter).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Pivot used to shuffle nodes in the CRUSH tree. This is
required argument. We use container ID value to select
container nodes, so `nil` value produces incorrect placements.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Netmap snapshot table caches bootstrap `AddPeer` txs so inner ring
node does not produce redundant approval txs for bootstrapped nodes.
However if node updates states to `Offline`, then such node should
be flagged in snapshot table, so re-bootstrap will actually produce
approval tx.
`ev.PublicKey.String()` returns uncompressed representation of the
node's public key, while snapshot contains compressed values.
Therefore the node was not flagged and re-bootstrap tx was not
approved by inner ring nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add numeric return from TaskManager.Reset method that shows the number of
canceled tasks. This values will be used for assessment of the progress of
the audit.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement Reset method on audit task manager that cleans task queue.
Extended TaskManager interface with Reset method on IR side. Call Reset
method in audit processor before new audit start.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
