In commit 17952924f3 we updated ServeBlob() to use an io.MultiWriter to
write simultaneously to the local store and the HTTP response.
However, copyContent was using a type assertion to only add headers if
the io.Writer was a http.ResponseWriter. Therefore, this change caused
us to stop sending the expected headers (i.e. Content-Length, Etag,
etc.) on the first request for a blob.
Resolve the issue by explicitly passing in http.Header and setting it
unconditionally.
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
We make sure they're not hiding at the bottom or in the middle
which makes debugging an utter nightmare!
Signed-off-by: Milos Gajdos <milosthegajdos@gmail.com>
This integrates the new module, which was extracted from this repository
at commit b9b19409cf458dcb9e1253ff44ba75bd0620faa6;
# install filter-repo (https://github.com/newren/git-filter-repo/blob/main/INSTALL.md)
brew install git-filter-repo
# create a temporary clone of docker
cd ~/Projects
git clone https://github.com/distribution/distribution.git reference
cd reference
# commit taken from
git rev-parse --verify HEAD
b9b19409cf
# remove all code, except for general files, 'reference/', and rename to /
git filter-repo \
--path .github/workflows/codeql-analysis.yml \
--path .github/workflows/fossa.yml \
--path .golangci.yml \
--path distribution-logo.svg \
--path CODE-OF-CONDUCT.md \
--path CONTRIBUTING.md \
--path GOVERNANCE.md \
--path README.md \
--path LICENSE \
--path MAINTAINERS \
--path-glob 'reference/*.*' \
--path-rename reference/:
# initialize go.mod
go mod init github.com/distribution/reference
go mod tidy -go=1.20
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently when registry is run as proxy it tries to cleanup unused blobs
from its cache after 7 days which is hard-coded. This PR makes that
value configurable.
Co-authored-by: Shiming Zhang <wzshiming@foxmail.com>
Co-authored-by: Manish Tomar <manish.tomar@docker.com>
Signed-off-by: Shiming Zhang <wzshiming@foxmail.com>
gofumpt (https://github.com/mvdan/gofumpt) provides a supserset of `gofmt` / `go fmt`,
and addresses various formatting issues that linters may be checking for.
We can consider enabling the `gofumpt` linter to verify the formatting in CI, although
not every developer may have it installed, so for now this runs it once to get formatting
in shape.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Instead of letting the cache grow without bound, use a LRU to impose a
size limit.
The limit is configurable through a new `blobdescriptorsize` config key.
Signed-off-by: Aaron Lehmann <alehmann@netflix.com>
This commit removes the following cipher suites that are known to be insecure:
TLS_RSA_WITH_RC4_128_SHA
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
TLS_ECDHE_RSA_WITH_RC4_128_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
And this commit deletes the tlsVersions of tls1.0 and tls1.1. The tls1.2 is the minimal supported tls version for creating a safer tls configuration.
Signed-off-by: david.bao <baojn1998@163.com>
Go 1.13 and up enforce import paths to be versioned if a project
contains a go.mod and has released v2 or up.
The current v2.x branches (and releases) do not yet have a go.mod,
and therefore are still allowed to be imported with a non-versioned
import path (go modules add a `+incompatible` annotation in that case).
However, now that this project has a `go.mod` file, incompatible
import paths will not be accepted by go modules, and attempting
to use code from this repository will fail.
This patch uses `v3` for the import-paths (not `v2`), because changing
import paths itself is a breaking change, which means that the
next release should increment the "major" version to comply with
SemVer (as go modules dictate).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Back in the before time, the best practices surrounding usage of Context
weren't quite worked out. We defined our own type to make usage easier.
As this packaged was used elsewhere, it make it more and more
challenging to integrate with the forked `Context` type. Now that it is
available in the standard library, we can just use that one directly.
To make usage more consistent, we now use `dcontext` when referring to
the distribution context package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The registry uses partial Named values which the named parsers
no longer support. To allow the registry service to continue
to operate without canonicalization, switch to use WithName.
In the future, the registry should start using fully canonical
values on the backend and WithName should no longer support
creating partial values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This commit refactors base.regulator into the 2.4 interfaces and adds a
filesystem configuration option `maxthreads` to configure the regulator.
By default `maxthreads` is set to 100. This means the FS driver is
limited to 100 concurrent blocking file operations. Any subsequent
operations will block in Go until previous filesystem operations
complete.
This ensures that the registry can never open thousands of simultaneous
threads from os filesystem operations.
Note that `maxthreads` can never be less than 25.
Add test case covering parsable string maxthreads
Signed-off-by: Tony Holdstock-Brown <tony@docker.com>
Ensure Accept headers are sent with TagService.Get (which hits manifest
endpoints). Add support for remote Get and Put for the proxied blobstore.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
challenges with the upstream until any proxied data is found not to be local.
Implement auth challenges behind an interface and add to unit tests. Also,
remove a non-sensical unit test.
Signed-off-by: Richard Scothern <richard.scothern@docker.com>
Most places in the registry were using string types to refer to
repository names. This changes them to use reference.Named, so the type
system can enforce validation of the naming rules.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Removes the Mount operation and instead implements this behavior as part
of Create a From option is provided, which in turn returns a rich
ErrBlobMounted indicating that a blob upload session was not initiated,
but instead the blob was mounted from another repository
Signed-off-by: Brian Bland <brian.bland@docker.com>
The current implementation of digest.FromBytes returns an error. This
error can never be non-nil, but its presence in the function signature
means each call site needs error handling code for an error that is
always nil.
I verified that none of the hash.Hash implementations in the standard
library can return an error on Write. Nor can any of the hash.Hash
implementations vendored in distribution.
This commit changes digest.FromBytes not to return an error. If Write
returns an error, it will panic, but as discussed above, this should
never happen.
This commit also avoids using a bytes.Reader to feed data into the hash
function in FromBytes. This makes the hypothetical case that would panic
a bit more explicit, and should also be more performant.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
of readers joining current downloads. Concurrent requests for the same blob
will not block, but only the first instance will be comitted locally.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Clean up calling convention for NewRegistryWithDriver to use functional
arguments.
This is a first step towards the refactor described in #215. I plan to
add additional options in the process of moving configurable items from
the App structure to the registry structure.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
with a new `proxy` section in the configuration file.
Create a new registry type which delegates storage to a proxyBlobStore
and proxyManifestStore. These stores will pull through data if not present
locally. proxyBlobStore takes care not to write duplicate data to disk.
Add a scheduler to cleanup expired content. The scheduler runs as a background
goroutine. When a blob or manifest is pulled through from the remote registry,
an entry is added to the scheduler with a TTL. When the TTL expires the
scheduler calls a pre-specified function to remove the fetched resource.
Add token authentication to the registry middleware. Get a token at startup
and preload the credential store with the username and password supplied in the
config file.
Allow resumable digest functionality to be disabled at runtime and disable
it when the registry is a pull through cache.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
