ContinueOnError assumes that something of type errcode.Errors contains
at least one error. This is generally true, but might not be true if the
remote registry returns an empty error body or invalid JSON. Add the
bounds check, and in the case where it fails, allow fallbacks to v1.
Fixes#18481
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix avoids overwritting the previous error messages, ensures the client gets the correct error messages and not just the most recent message during the pull request.
For this `var lastErr` replaced with a slice which acts as a temp place holder for the list of returned error messages for every attempt.
The slice is later joined and returned to the caller function after searching for the image with diffirent versions(v2,v1,v0).
Updated the code with check for no space left on device error occurance and prevent the
daemon on falling back to v1,v0.
Incorporated the comments from @calavera, @RichardScothern, @cpuguy83
Signed-off-by: Anil Belur <askb23@gmail.com>
This updates the vendored docker/distribution to the current master
branch.
Note the following changes:
- The manifest package was split into manifest/schema1. Most references
to the manifest package in the engine needed to be updated to use
schema1 instead.
- Validation functions in api/v2 were replaced by the
distribution/reference package. The engine code has been updated to
use the reference package for validation where necessary. A future PR
will change the engine to use the types defined in
distribution/reference more comprehensively.
- The reference package explicitly allows double _ characters in
repository names. registry_test.go was updated for this.
- TestPullFailsWithAlteredManifest was corrupting the manifest JSON, now
that the schema1 package unmarshals the correct payload. The test is
being changed to modify the JSON without affecting its length, which
allows the pull to succeed to the point where digest validation
happens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This reverts commit c2d5c29437.
Commit caused issues on systems with case-insensitive filesystems.
Revert for now
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- Move autogen/dockerversion to version
- Update autogen and "builds" to use this package and a build flag
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Pick up name regexp change in distribution to allow matching of hostnames as a valid component of a repository.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Search terms shouldn't be restricted to only full valid repository
names. It should be perfectly valid to search using a part of a name,
even if it ends with a period, dash or underscore.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This patch splits LookupEndpoints into LookupPullEndpoints and
LookupPushEndpoints so that mirrors added with --registry-mirror are
skipped in the list returned by LookupPushEndpoints.
Fixes https://github.com/docker/distribution/issues/823
Signed-off-by: Tibor Vass <tibor@docker.com>
Some structures use int for sizes and UNIX timestamps. On some
platforms, int is 32 bits, so this can lead to the year 2038 issues and
overflows when dealing with large containers or layers.
Consistently use int64 to store sizes and UNIX timestamps in
api/types/types.go. Update related to code accordingly (i.e.
strconv.FormatInt instead of strconv.Itoa).
Use int64 in progressreader package to avoid integer overflow when
dealing with large quantities. Update related code accordingly.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch fixes a bug where a user specifies a v1 mirror for
--registry-mirror and pull an image from the Hub.
It used to not fallback because of an unexpected error returned when
trying to JSON marshal nginx output.
We now ensure that any unexpected error falls back to the next endpoint
in the list.
Signed-off-by: Tibor Vass <tibor@docker.com>
Currently login and search do not load per registry certificates.
This is a regression caused by the last refactor since this was recently fixed.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
If a registry mirror is using TLS, ensure that certs for it
are picked up from /etc/docker/certs.d
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
The only uses of RequestAuthorization and its associated functions were
removed in 7fed379d95 ("Update graph to
use vendored distribution client for the v2 codepath")
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- fully capitalize HTTP in HTTPHeaders
- comment for CONFIGFILE
- camelcase and privatize oldConfigfile, defaultIndexserver
- remove unused var errConfigFileMissing
- comments for methods and functions throughout
- external references to renamed variables changed
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Currently canonical name gets set to the local name and displayed in the errors.
Canonical name should be the unique and canonical name for an image.
Use docker.io as the canonical domain for images on the public registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The docker/distribution dependency was updated in the previous commit to allow
repository name components to only consist of a single letter. The unit tests
have been updated to cement this change.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
By adding this header AuthTransport will add Basic authentication to the request and allow 'docker search' results to include private images.
Signed-off-by: Matt Moore <mattmoor@google.com>
The registry client's TLS configuration used the
default cipher list, including RC4. This change
copies the default cipher list from Golang 1.4 and
removes RC4 from that list. RC4 ciphers are considered
weak and vulnerable to a number of attacks.
Uses the tlsconfig package to define allowed ciphers.
Signed-off-by: Eric Windisch <eric@windisch.us>
Today, endpoints implementing v2 cannot properly fallback to v1 because the underlying transport that deals with authentication (Basic / Token) doesn't get annotated.
This doesn't affect DockerHub because the DockerHub endpoint appears as 'https://index.docker.io/v1/' (in .dockercfg), and the 'v1' tricks this logic just long enough that the transport is always annotated for DockerHub accesses.
Signed-off-by: Matt Moore <mattmoor@google.com>
This patch ensures no auth headers are set for v1 registries if there
was a 302 redirect.
This also ensures v2 does not use authTransport.
Signed-off-by: Tibor Vass <tibor@docker.com>
Refactoring in Docker 1.7 changed the behavior to add this header where as Docker <= 1.6 wouldn't emit this Header on a HTTP 302 redirect.
This closes#13649
Signed-off-by: Jeffrey van Gogh <jvg@google.com>
It should not print to STDOUT so that it only prints the debugTransport
output if there was an error in one of the registry tests.
Signed-off-by: Tibor Vass <tibor@docker.com>
To ensure manifest integrity when pulling by digest, this changeset ensures
that not only the remote digest provided by the registry is verified but also
that the digest provided on the command line is checked, as well. If this check
fails, the pull is cancelled as with an error. Inspection also should that
while layers were being verified against their digests, the error was being
treated as tech preview image signing verification error. This, in fact, is not
a tech preview and opens up the docker daemon to man in the middle attacks that
can be avoided with the v2 registry protocol.
As a matter of cleanliness, the digest package from the distribution project
has been updated to latest version. There were some recent improvements in the
digest package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The v2 registry will act as a pull-through cache, and needs to be
handled differently by the client to the v1 registry mirror.
See docker/distribution#459 for details
Configuration
Only one v2 registry can be configured as a mirror. Acceptable configurations
in this chanage are: 0...n v1 mirrors or 1 v2 mirror. A mixture of v1 and v2
mirrors is considered an error.
Pull
If a v2 mirror is configured, all pulls are redirected to that mirror. The
mirror will serve the content locally or attempt a pull from the upstream mirror,
cache it locally, and then serve to the client.
Push
If an image is tagged to a mirror, it will be pushed to the mirror and be
stored locally there. Otherwise, images are pushed to the hub. This is
unchanged behavior.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This patch removes the need for requestFactories and decorators
by implementing http.RoundTripper transports instead.
It refactors some challenging-to-read code.
NewSession now takes an *http.Client that can already have a
custom Transport, it will add its own auth transport by wrapping
it.
The idea is that callers of http.Client should not bother
setting custom headers for every handler but instead it should
be transparent to the callers of a same context.
This patch is needed for future refactorings of registry,
namely refactoring of the v1 client code.
Signed-off-by: Tibor Vass <tibor@docker.com>
Thanks to @dmcgowan for noticing.
Added a testcase to make sure Save() can create the dir and then
read from it.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This PR does the following:
- migrated ~/.dockerfg to ~/.docker/config.json. The data is migrated
but the old file remains in case its needed
- moves the auth json in that fie into an "auth" property so we can add new
top-level properties w/o messing with the auth stuff
- adds support for an HttpHeaders property in ~/.docker/config.json
which adds these http headers to all msgs from the cli
In a follow-on PR I'll move the config file process out from under
"registry" since it not specific to that any more. I didn't do it here
because I wanted the diff to be smaller so people can make sure I didn't
break/miss any auth code during my edits.
Signed-off-by: Doug Davis <dug@us.ibm.com>
registry/SearchResults was missing the "is_automated" field.
I added it back in.
Pull this 'table' removal one from the others because it fixed
a bug too
Signed-off-by: Doug Davis <dug@us.ibm.com>
