If shard ID is stored in metabase (it is not the first time boot), read it,
set it, use it (not a generated one) in the metrics writer.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make it store its internal `zap.Logger`'s level. Also, make all the
components to accept internal `logger.Logger` instead of `zap.Logger`; it
will simplify future refactor.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Currently, when removing shard special care must be taken with respect
to shard numbering. `mode: disabled` allows to leave shard configuration
in place while also ignoring it during initialization. This makes
disk replacement much more convenient.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Degraded mode allows us to operate without an SSD,
thus writecache should be unavailable in this mode.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Add a common error for this case because it is not an error
which should increase error counter. Single error simplifies checks on
the call-site.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Negative values have no sense. On the other hand it differs from the
blobovnicza's configuration and prevents unification.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Allow user to initiate flushing objects from a writecache.
We need this in 2 cases:
1. During writecache storage schema update, it should be flushed with
the old version of node and started clean with a new one.
2. During SSD replacement, to avoid data loss.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Use a simple loop at the callsite. This way we remove as much as we can.
Also, `Delete` metrics is more meaningful now.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
- Meta now supports (and requires) inc/dec labeled counters
- The new logic counter is incremented on `Put` operations and is
decremented on `Inhume` and `Delete` operations that are performed on
_stored_ objects only
- Allow force counters sync. "Force" mode should be used on metabase resync
and should not be used on a regular meta start
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Re-configuration of Blobovnicza's object size limit must not affect
already stored objects. In previous implementation `Blobovnicza` didn't
see objects stored in buckets which became too big after size limit
re-configuration. For example, lets consider 1st configuration with 64KB
size limit for stored objects. Lets assume that we stored object of 64KB
size, and re-configured `Blobovnicza` with 32KB limit. After reboot
object should be still available, but actually it isn't. This is caused
by `Get` operation algorithm which iterates over configured size ranges
only, and doesn't process any other existing size bucket. By the way,
increasing of the object size limit didn't lead to the problem even in
previous implementation.
Make `Blobovnicza.Get` method to iterate over all size buckets
regardless of current configuration. This covers the described scenario.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Set flush mark in the inside the flush worker because writing to the blobstor
can fail. Because each evicted object must be deleted, it is reasonable
to do this in the evict callback.
The evict callback is protected by LRU mutex and thus potentially interferes
with `Get` and `Iterate` methods. This problem will be addressed in the
future.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Maintain an invariant that any blobovnicza is present either
in `opened` or in `active` map. Otherwise, the logic becomes too
complicate because it is not obvious when we should close the blobovnicza.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This check should occur on the shard level, but because
blobstor components expose `Open(readOnly bool)` interface,
it is reasonable to expect an error here.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If the file doesn't exist, return `apistatus.ObjectNotFound`.
First check is still there as a shortcut.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This tests check that each blobstor component behaves similarly when
same methods are being used. It is intended to serve as a specification
for all future components.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Includes:
1. Renaming counter key to distinguish logical and physical objects
2. Version update dropping since changes could be done in a compatible way
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
1. Move compression parameters to the `shard` section.
2. Allow to use multiple sub-storage components in the blobstor.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
1. Remove in-memory cache. It doesn't persist objects and if we want
more speed, `NoSync` option can be used for the bolt DB.
2. Put to the metabase in a synchronous fashion. This considerably
simplifies overall logic and plays nicely with the metabase bolt DB
batch settings.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Allow to extend blobstor with more storage sub-systems. Currently
objects stored in the FSTree have empty byte slice descriptor and object
from blobovnicza tree have the same id as earlier. Each such change in
the identifier formation should be accompanied with metabase version
increase.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Close#1647.
Initially, `Sync: false` was provided because we can already lose
objects cached in memory. However, future changes in writecache will
remove inmemory cache and speed up it via other means.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If an object is found in the Write-cache and is placed at the end of
the in-memory cache, the memory counter update operation tries to
dereference the index that is out of the sliced array. Moreover, even if
panic does not appear, the counter is updated with the wrong value.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Return all the objects on the empty common prefix search without search
optimizations that breaks boltDB logic.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If an object has not been marked for removal by the GC in the current epoch
yet but has already expired, respond with `ErrObjectNotFound` api status.
Also, optimize shard iteration: a node must stop any iteration if the object
is found but gonna be removed soon.
All the checks are performed by the Metabase.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After a4adb79db new logical error could be returned. Do not increase
error counter in this case.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If metabase can't be opened in the default mode, try opening shard
first in `ReadOnly` mode and then in `DegradedReadOnly`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
`Degraded` mode can be set by the administrator if needed.
Modifying operations in this mode can lead node into an inconsistent state
because metabase checks such as lock checking are not performed.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
There is a need to support working w/o shard if it has problems with
blobovnicza tree.
Make `BlobStor.Init` to return new `ErrInitBlobovniczas` error. Remove
shard from storage engine's shard set if it returned this error from
`Init` call. So if some of the shards (but not all) return this error,
the node will be able to continue working without them.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Reduce public interface of this package. Later each result will contain
an additional status, so it makes more sense to use the same functions
and result processing everywhere.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
1. Modifying operations are not expected to fail, unless the shard is
read-only.
2. `Get*` operations should increase error counter too, unless the
error is `ErrTreeNotFound`.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Do not return backend type from the service for now, because memory
backend is expected to vanish.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
The tricky part here is the engine itself: we stop iteration on
`ErrReadOnly` because it is better to synchronize the shard later than
to have partial trees stored in 2 shards.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Current implementation prevents invalid operations to become valid at
some later point (consider adding a child to the non-existent parent and
then adding the parent). This seems to diverge from the paper algorithm
and complicates implementation. Make it simpler.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Currently to find a node by path we iterate over all the children on
each level. This is far from optimal and scales badly with the number of
nodes on a single level. Thus we introduce "indexed attributes" for
which an additional information is stored and which can be use in
`*ByPath` operations. Currently this set only includes `FileName`
attribute but this may change in future.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Consider a node `{FileName: "dir", Attribute: "xxx"}`. In case we add
a new node by path `["dir", "file.txt"]`, create a new intermediate node
with a single attribute.
`GetByPath` now also considers only nodes with a single attribute while building a path.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In this commit we implement algorithm for CRDT trees from
https://martin.klepmann.com/papers/move-op.pdf
Each tree is identified by the ID of a container it belongs to
and the tree name itself. Essentially, it is a sequence of operations
which should be applied in chronological order to get a usual tree
representation.
There are 2 backends for now: bbolt database and in-memory.
In-memory backend is here for debugging and will eventually act
as a memory-cache for the on-disk database.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Replace `ErrRangeOutOfBounds` error from `pkg/core/object` package with
`ObjectOutOfRange` from `apistatus` package. That error is returned by
storage node's server as NeoFS API statuses.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Shard is intended to be used as a separate failure domain,
which usually resides on a separate disk. Thus, sequential
initialization is bound by IO and this change speeds up thing a bit.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
The main problem is to distinguish the case of initial initialization
and update from version 0. We can't do this at `Open`, because of
`resync_metabase` flag. Thus, the following approach was taken:
1. During `Open` check whether the metabase was initialized.
2. Check for the version in `Init` or write the new one if the metabase
is new.
3. Update version in `Reset`.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
